EUROLAB Together with its expert team, it is a pioneer in the testing and certification of energy efficiency and alternative energy products such as solar panels, wind generators and inverters. 

In addition to traditional lighting and electrical sign tests, EUROLAB offers Light Emitting Diode (LED) testing services for:

• UL 1598 Fixtures
• UL 1993 Self-Ballasted Lamps and Lamp Adapters
• Investigation of Light Emitting Diode Light Sources Used in UL 8750 Lighting Products.

EUROLAB safety laboratories can test most LED replacement bulbs, including incandescent and fluorescent applications, and provide energy efficiency certification for LED products, including In Situ Temperature Measurement Testing (ISTMT) for lighting products: ANSI/UL 1598 or ANSI/UL 153.

EUROLABis one of a handful of laboratories that can test all requirements of UL1703:

• UL1703 - Safety of Flat Plate Photovoltaic Modules and Panels
• Flame Spread Test
• Hot Spot Durability Test
• Temperature Test
• Voltage, Current and Power Measurements Test
• Leakage Current Test
• Voltage Drop Test
• Push Test
• Cutting Test
• Adhesion Path Resistance Test
• Dielectric Voltage Withstand Test
• Wet Insulation-Resistance Test
• Reverse Current Overload Test
• Terminal Torque Test
• Impact Testing
• Burning Brand Test
• Water Spray Test
• Accelerated Aging Test
• Temperature Loop Test
• Humidity Test
• Corrosive Atmosphere Test
• Salt Spray
• Moist Carbon Dioxide / Sulfur Dioxide
• Metallic Coating Thickness Test
• Mechanical Loading Test
• Wiring Section Safety Test

EUROLAB also tests these solar and PV standards:

• IEC 61215 - Crystalline Silicon Terrestrial Photovoltaic (PV) Modules - Design Competence and Type Approval
• IEC 61646 - Thin Film Terrestrial Photovoltaic (PV) Modules - Design Competence and Type Approval
• IEC 61730-2 - Photovoltaic Module Safety Capability, Part 2

As part of some of these standards EUROLABperforms 85°C/85% RH (RH) testing using walk-in chambers. 85/85 is the standard test for the service life evaluation of photovoltaic modules specified in IEC and UL standards. EUROLABcan test any duration specified by the customer and is a rare laboratory that combines world-class EMC and Product Safety experience and know-how to effectively and efficiently test renewable energy inverters for safety and island protection requirements.

EUROLABprovides an experienced inverter testing service for solar panels, wind turbines and other alternative energy cabling equipment.

EUROLAB It tests according to the following standards:

• UL1741 - Distributed Energy Source Inverters, Converters, Controllers and Interconnection System Equipment IEEE 1547.1 Anti-Islanding Test 
• To UL6140 - Examination of Wind Turbine Generating Systems
• UL6141 - Investigation of Wind Turbine Converters and Interconnection Systems Equipment
• UL 458 & C22.2 No.107.1 Power Converters / Inverters for Land Vehicles and Marine Vehicles

EUROLAB, with its highly expert team and internationally accredited laboratories, Green Energy Tests It performs all test, analysis, measurement, evaluation and report generation services completely and reliably.