Supports chemical testing for ASTM, EN, IEC, ISO and every standard in the automotive, medical, food and beverage, cosmetics, apparel, construction, shipbuilding, and electrical and electronics industries.
EUROLAB As, we provide testing and analysis services in accordance with the applicable standards for various chemical substances such as fuel oil, oil, gas and ash.
| Test method | Hood | Sample size |
|---|---|---|
| AAR 942 | Rolling Stability 96 hours. @ 180°F | 100 gram |
| AAR M-914 2.1 | Material and Consistency in Brake Cylinder Oils | 25 gr |
| AAR M-914 2.3.1 | Apparent Viscosity ASTM D1092 @ -40°F | 500 gr |
| AAR M-914 2.3.2 | Freezing point | 75ml |
| AAR M-914 2.3.3 | spreadability | 100 gram |
| AAR M-914 2.4.1 | Oil Separation | 50 gram |
| AAR M-914 2.6 | Oil Swelling of Brake Cylinder Elastomers | 200 gr |
| AAR M-914 2.7.1 | Water Stability of Brake Cylinder Oils | 100 gram |
| AJ 106-2 | Molybdenum Disulfide – Ford Method | 20 gr |
| AN-G-3A | Bleeding and Evaporation, 50 hours. @ 212°F | 25 gr |
| APHA4500 | sulphides | 25 gr |
| API RP 5A3-C | Penetration, Worked After Cooling, Appendix C | 1 pints |
| API RP 5A3-D | Evaporation Test, Appendix D | 100 gram |
| API RP 5A3-E | Oil Separation Nickel Cone, Appendix E | 25 gr |
| API RP 5A3-F | Application/Compliance, Annex F | 1 pints |
| API RP 5A3-G | Gas Evolution, Appendix G | 50 gram |
| API RP 5A3-H | Water Leakage, Appendix H | 100 gram |
| ASTM B117 | 48 hour Salt Spray Corrosion Test (aka FTM-4001) | 250ml |
| ASTM B117 | Salt Spray Corrosion Test @ 100 hours | 250ml |
| ASTM B117 | Salt Spray Corrosion Test @ 300 hours | 250ml |
| ASTM B117 | Salt Spray Corrosion Test @ 500 hours | 250ml |
| ASTM B117-PTI | Salt Spray Corrosion Test - PTI Specification @ 1000 hours | 100 gram |
| ASTM B117-PTI | Soak Test @ 720 hours. | 100 gram |
| ASTM D56 | Flash Point, Label Closed Cup, -20°C to 110°C | 200ml |
| ASTM D70 | Specific gravity | 25ml |
| ASTM D86 | Distillation, High Temperature in Petroleum Products | 100ml |
| ASTM D87 | Melting Point of Candles | 5 gr |
| ASTM D88 | Viscosity Saybolt (SUS) and Calculation (Recommended D2161) | 50ml |
| ASTM D91 | Number of precipitation | 200ml |
| ASTM D92 | Flash OR Fire Point, Cleveland Open Cup | 100ml |
| ASTM D92 | Flash AND Fire Points, Cleveland Open Cup | 100ml |
| ASTM D93 | Flash Point, Pensky-Martens Closed Cup | 100ml |
| ASTM D94 | saponification number | 100ml |
| ASTM D95 | Water by Distillation | 100ml/100g |
| ASTM D97 | for point | 100ml |
| ASTM D127 | Melting Point (microcrystalline waxes) | 10 gr |
| ASTM D128 | Damp content | 100 gram |
| ASTM D128 | Analysis of Greases | 100 gram |
| ASTM D128 | Aniline Point, Extracted Fluid (+ D611) | 100 gram |
| ASTM D128 | Ash Content | 100 gram |
| ASTM D128 | Fatty Acid Content | 25 gr |
| ASTM D128 | Free Alkaline/Fatty Acid from Soap | 25 gr |
| ASTM D128 | Percent Soap | 25 gr |
| ASTM D128 | Percent Concentrator | 25 gr |
| ASTM D128 | Soxhlet Extraction of Grease | 50 gram |
| ASTM D130 | Copper Strip Corrosion – Oil – needs time and temperature | 100ml |
| ASTM D149 | Dielectric Disruption Voltage and Dielectric Strength of Solid Electrical Insulation Materials -per cavity | 150 gr |
| ASTM D150 | Dielectric Constant – Solid Electrical Insulation @ Ambi AC Loss Characteristics and Permeability | 50 gram |
| ASTM D150 | Dielectric Constant - AC Loss Properties and Permeability of Solid Electrical Insulation @ Above | 50 gram |
| ASTM D189 | Carbon Residue, Conradson of Petroleum Products | 20ml |
| ASTM D217 | Penetration, Untreated | 3 pints |
| ASTM D217 | Penetration, 60 Strokes Worked | 1 pints |
| ASTM D217 | Penetration, Low Temperature, Untreated @ -40°C | 3 pints |
| ASTM D217 | Penetration, Machined Stability, 10.000 Blows | 1 pints |
| ASTM D217 | Storage Stability @ 2 months, Untreated and Processed Penetration | 3 pints |
| ASTM D217 | Storage Stability @ 4 months, Untreated Processed Penetration | 3 pints |
| ASTM D217 | Penetration, Machined Stability, Extended 100.000 hits | 1 pints |
| ASTM D257 | Volume Resistance – DC Resistance or Conductivity of Insulation Materials @ 23°C ± 2° | 50 gram |
| ASTM D257 | Volume Resistance – DC Resistance or Conductivity of Insulation Materials @ Above 25°C | 50 gram |
| ASTM D287 | Gravity, API @ 60°F | 500ml |
| ASTM D323 | Vapor Pressure, Reid | 500ml |
| ASTM D381 | Current Gum Content | 800ml |
| ASTM D395 | Compression Set of Elastomers | 500 gr |
| ASTM D445 | Viscosity, Kinematic Ambient - 401°F - temperature required | 50ml |
| ASTM D445 | Viscosity, Kinematic Low Temperature - -65°F - temperature required | 50ml |
| ASTM D445 | Kinematic Viscosity @ -40°C (without solids and solvents) Mil-PRF-63460 | 50ml |
| ASTM D471 | Elastomer Compatibility | 500ml |
| ASTM D482 | Ash Content of Petroleum Products | 50 gram |
| ASTM D482 | Ash Preparation | 50 gram |
| ASTM D512 | chlorides | 200 gr |
| ASTM D524 | Carbon Residue, Ramsbottom | 20ml |
| ASTM D525 | Oxidation Induction Period (Gasoline) | 100ml |
| ASTM D566 | Drip Point with Fluid Bath | 5 gram |
| ASTM D567 | Viscosity Index – calculation with D100 viscosities at 210°F and 445°F | 50ml |
| ASTM D611 | aniline point | 100ml |
| ASTM D638 | Tensile Strength of Elastomers | 500 gr |
| ASTM D664 | Acid Number, Potentiometric, 2001 or 2004 or 2009 or 2011A version | 50 gram |
| ASTM D664 | Acid Number, Strong, 2001 or 2004 or 2009 or 2011A version | 50 gram |
| ASTM D665 | Rust Preventive Procedure A w/Distilled Water, 4 or 24 hours. | 1 liter |
| ASTM D665 | Rust Prevention Procedure B w/ Synthetic Seawater, 4 or 24 hours. | 1 liter |
| Per ASTM D665, MIL-PRF-17672D, 17331 or 32353 | Rust Prevention Procedure B With Water Washing | 700ml |
| ASTM D721 | Oil Content of Petroleum Waxes | 50 gram |
| ASTM D823 | Dry Film Performance | Customer supplied samples |
| ASTM D874 | sulfated ash | 50 gram |
| ASTM D877 | Dielectric Disruption Voltage of Insulating Liquids Using Disc Electrodes (125 ml min.) (Oil) | 300ml |
| ASTM D891A | Specific Gravity Procedure A Hydrometer @ 20°C | 500ml |
| ASTM D891B | Specific Gravity Procedure B Pycnometer @ 20°C | 50ml |
| ASTM D892 | Order of Foaming Properties I think | 200ml |
| ASTM D892 | Order of Foaming Properties I, II, III | 500ml |
| ASTM D892 | Foaming Properties Order I,II,III,IV (Mercon) | 1000ml |
| ASTM D893 | Pentane and Toluene Insolubles Procedure A (without coagulant) or Procedure B (with coagulant) | 50ml |
| ASTM D924 | Dissipation (Power) Factor and Relative Permeability (Dielectric Const.) @ 23°C ± 2°C | 50ml |
| ASTM D924 | Consumption (Power) Factor and Relative Permeability (Dielectric Constant) Above 25°C | 50ml |
| ASTM D937 | Penetration (used for softer unrefined waxes) | 2 lbs |
| ASTM D938 | freezing point | 10 gr |
| ASTM D942 | Pressure Vessel Oxidation @ 100 hours – per run | 50 gram |
| ASTM D942 | Pressure Vessel Oxidation @ 500 hours – per run | 50 gram |
| ASTM D942 | Pressure Vessel Oxidation @ 1000 hours per run | 50 gram |
| ASTM D943 | Oxidation Stability (TOST) initial setup fee (uptime additional $4,50 per day) | 1 liter |
| ASTM D971 | Interface Tension @ 20°C or 25°C | 100ml/100g |
| ASTM D972 | Evaporation Loss @ 6 1/2 hours – temperature required | 25ml/25g |
| ASTM D972 | Evaporation Loss @ 22 hours - temperature required | 25ml/25g |
| ASTM D972 | Evaporation Loss @ 72 hours – temperature required | 25 ml/ 25 g |
| ASTM D972 | Evaporative Loss @ 500 hours – temperature required (Add $1/hour for additional run time) | 25 ml/ 25 g |
| ASTM D974 | Neutralization Number – Color | 50ml |
| ASTM D1078 | Distillation Range of Volatile Organic Liquids | 100ml |
| ASTM D1092 | Apparent Viscosity of Greases – 1 nozzle | 1 pound |
| ASTM D1092 | Apparent Viscosity of Greases – 8 nozzles with graph | 1 pound |
| ASTM D1093 | Acidity of the Water Layer and Distillation Residues | 100ml |
| ASTM D1119 | Ash Content of Engine Coolants | 50ml |
| ASTM D1120 | Boiling point | 100ml |
| ASTM D1121 | Antifreeze Reserve Alkalinity | 20ml |
| ASTM D1122 | Specific Gravity @ 60°F | 500ml |
| ASTM D1133 | Kauri Butanol Value of Hydrocarbon Solvents | 100ml |
| ASTM D1159 | Bromine Number by Electrometric Titration | 20 gr |
| ASTM D1160 | Distillation Under Reduced Pressure | 300ml |
| ASTM D1169 | Volume Resistivity – Specific Resistivity of Electrically Insulating Fluids @ 23°C ± 2° | 50ml |
| ASTM D1169 | Volume Resistance – Specific Resistance of Electrically Insulating Fluids Above 25°C | 50 ml |
| ASTM D1177 | Freezing point | 75ml |
| ASTM D1186 | Dry Film Thickness – See Fig. ASTM D7091 | Customer supplied samples |
| ASTM D1209 | Color – Platinum Cobalt Scale | 200ml |
| ASTM D1217 | Density Bingham Capillary Piconometer - please specify temperature | 25ml |
| ASTM D1218 | Refractive Index of Viscous Materials @ 20°C or 25°C | 10ml |
| ASTM D1261 | Bomb Copper, Corrosion of Greases | 100 gram |
| ASTM D1263 | Wheel Bearing Leakage of Greases | 200 gr |
| ASTM D1264 | Water Wash Properties @ 100°F/38°C (Per run) | 20 gr |
| ASTM D1264 | Water Wash Properties @ 106°F/41°C (Per run) | 20g |
| ASTM D1264 | Water Wash Properties @ 174°F/79°C (Per run) | 20g |
| ASTM D1275 | Corrosive Sulfur in Electrical Insulating Oils | 300ml |
| ASTM D1287 | pH of Engine Coolants and Rust Inhibitors (Glycol) | 100ml |
| ASTM D1298 | Gravity, Specific @ 60°/60°F | 500ml |
| ASTM D1310 | Flash Point, Label Open Cup | 100ml |
| ASTM D1321 | Penetration of candles | 100 gram |
| ASTM D1331 | Surface tension | 100ml |
| ASTM D1353 | Non-Volatile Residue | 100ml |
| ASTM D1364 | Water in Volatile Solvents | 25ml |
| ASTM D1384 | Antifreeze Glassware Corrosion Per Run | 1 gallon |
| ASTM D1400 | Film Appearance and Thickness | 100 gram |
| ASTM D1401 | Emulsion Properties @54°C or 82°C | 100ml |
| ASTM D1403 | Penetration, Untreated or Machined, 1/4 Scale | 50 gram |
| ASTM D1403 | Penetration, Untreated or Machined, 1/2 Scale | 10 gr |
| ASTM D1403 | Penetration, Low Temperature, Untreated @ 0°C to -40°C | 1 pints |
| ASTM D1404 | Harmful Particles in Greases | 20 gr |
| ASTM D1414 | Tire Inflation of 'O' Rings | 500 gr |
| ASTM D1478 | Low Temperature Torque – temperature required | 10 gr |
| ASTM D1478 | Low Temperature Torque – With Preconditioning to BMS 3-25C Type II | 10 gr |
| ASTM D1481 | Density with Lipkin Bicapillary Pycnometer up to 100°C per temperature | 50ml |
| ASTM D1481 | Density over 100°C with Lipkin Bicapillary Pycnometer – per temperature | 50ml |
| ASTM D1500 | Color, ASTM Color Chart | 100ml |
| ASTM D1533 | Water content | 50ml |
| ASTM D1552 | Sulfur by Ignition | 24ml |
| ASTM D1613 | Acidity in Volatile Solvents and Chemical Intermediates | 100ml |
| ASTM D1721 | Oxidizable Substance (Persistence Time of Tricresyl Phosphate) | 50ml |
| ASTM D1722 | Miscibility of Water-Soluble Solvents with Water | - |
| ASTM D1742 | Separation of Oils, Storage, Greases @ 24 hours | 300 gram |
| ASTM D1742 | Oil Separation, Grease Storage @ 48 hours | 300 gram |
| ASTM D1742 | Oil Separation, Grease Storage @ 96 hours | 300 gram |
| ASTM D1742 | Separation of Oils, Storage, Greases @ 168 hours | 300 gram |
| ASTM D1743 | Anti-Rust Properties of Greases | 25 gr |
| ASTM D1744 | Water Content, Karl Fischer – discontinued use D4377 | 50ml |
| ASTM D1747 | Refractive Index of Viscous Material @ 20°C or 25°C | 10ml |
| ASTM D1748 | Humidity Cabinet Test @ 100 hours | 500ml |
| ASTM D1748 | Humidity Cabinet Test @ 192 hours | 500ml |
| ASTM D1748 | Humidity Cabinet Test @ 400 hours | 500ml |
| ASTM D1748 | Humidity Cabinet Test @ 900 hours | 500ml |
| ASTM D1748 | Humidity Cabinet Test @ 1000 hours | 500ml |
| ASTM D1796 | Water and Sediment | 200ml |
| ASTM D1816 | Dielectric Breakdown Voltage of Insulating Oils Using VDE Electrodes at 1mm OR 2mm Gap | 1 liter per cavity (675 ml minimum) |
| ASTM D1824 | Brookfield Viscosity (Resin) – temperature required | 500ml |
| ASTM D1831 | Rolling Stability 2 hours. Between 20°C and 35°C | 100 gram |
| ASTM D1831 | Rolling Stability 2 hours. @ 100°C (it can only be operated at this temperature @ 2 hours.) | 100 gram |
| ASTM D1831 | Rolling Stability 20 hours. @ Environment | 100 gram |
| ASTM D1831 | Rolling Stability 24 hours. @ 180°F (cannot work above this temperature.) | 100 gram |
| ASTM D1831 | Rolling Stability 50 hours. @ 180°F (cannot work above this temperature.) | 100 gram |
| ASTM D1831 | Rolling Stability 96 hours. @ 180°F (cannot work above this temperature.) | 100 gram |
| ASTM D1876 | Peel Resistance of Adhesives T-Peel Test | Customer supplied samples |
| ASTM D1881 | Foaming Trends of Engine Coolants in Glassware | 200ml |
| ASTM D1894 | Slide Test (Static and Kinetic Coefficient Friction of Plastic Film) | Customer supplied samples |
| ASTM D1957 | Hydroxyl Number | 20 gr |
| ASTM D1976 | Elements in Water by Inductively Coupled Argon Plasma Atomic Emission Spectroscopy | 10g |
| ASTM D1982 | Titer Point of Fatty Acids | 50 gram |
| ASTM D2070 | Thermal Stability of Hydraulic Oils | 300ml |
| ASTM D2074 | Amine Value | 15 gr |
| ASTM D2109 | Non-Volatile Residue | 100ml |
| ASTM D2110 | pH of Water Extracted from Halogenated Organic Solvents | 200ml |
| ASTM D2112 | Rotary Pressure Vessel Oxidation Test – RPVOT – up to 48 hours – reports average of 2 runs | 200ml |
| ASTM D2140 | Carbon Type Composition of Insulating Oils | 100ml |
| ASTM D2155 | Autoignition Temperature | 5ml |
| ASTM D2161 | Saybolt (SUS) – Viscosity and Calculation | 50ml |
| ASTM D2194 | Concentration of Formaldehyde Solutions | 10ml |
| ASTM D2196 | Brookfield Viscosity, Procedure A, B or C – Specify | 200ml |
| ASTM D2265 | Aluminum Block Drop Point | 5 gr |
| ASTM D2266 | Four Ball Grease Wear @ 1 hour. | 50 gram |
| ASTM D2266 | Four Ball Grease Wear @ 2 hour. | 50 gram |
| ASTM D2266 | Four Ball Grease Wear @ 4 hour. | 50 gram |
| ASTM D2266 | Four Ball Grease Wear @ 1 hour. w/ Coefficient of Friction Graph | 50 gram |
| ASTM D2266 | Four Ball Grease Wear w/Coef. Friction Graph @ 2 hours | 50 gram |
| ASTM D2266 | Grease M-50 Four Ball Wear of Steel Balls | 50 gram |
| ASTM D2270 | Viscosity Index -40°C and 100°C, calculation with viscosities D445 | 50ml |
| ASTM D2272 | Rotary Pressure Vessel Oxidation Test – RPVOT – Up to 48 hours – Add $48 per hour after 1,00 hours | 200ml |
| ASTM D2273 | Trace Sediment Contamination | 200ml |
| ASTM D2274 | Oxidation Stability of Distillate Fuel Oil | 500ml |
| ASTM D2276 | Particulate Contamination | 200ml |
| ASTM D2369 | Volatile Content of Coatings | 10 gr |
| ASTM D2386 | Freezing Point of Aviation Fuel | 75ml |
| ASTM D2416 | Carbon Residue of Petroleum Products, Conradson | 50ml |
| ASTM D2440 | Oxidation Stability of Mineral Insulation Oil @ 72 hours. | 100ml |
| ASTM D2440 | Oxidation Stability of Mineral Insulation Oils @ 164 hours. | 100ml |
| ASTM D2500 | Cloud Point of Transparent Fluids | 100ml |
| ASTM D2502 | Molecular Weight by Viscosity – Includes viscosities of 100°F and 210°F. | 50ml |
| ASTM D2509 | Timken Load Bearing Test for Grease – pass/fail load | 1 quarter |
| ASTM D2509 | Timken OK Load Bearing Test for Grease – Estimated 5 loads | 1 gallon |
| ASTM D2510 | Fluid Resistance Per Fluid/Film Adhesion | 500 gr |
| ASTM D2511 | Thermal Shock Susceptibility (Dry Film Lubricant) | 500 gr |
| ASTM D2532 | Viscosity, Kinematics, Storage 72 hours. (0°F to -655°F) – temperature required. | 50ml |
| ASTM D2595 | Evaporation Loss @ 6 1/2 hours – temperature required | 25ml/25g |
| ASTM D2595 | Evaporation Loss @ 22 hours - temperature required | 25ml/25g |
| ASTM D2595 | Evaporation Loss @ 72 hours – temperature required | 25ml/25g |
| ASTM D2595 | Evaporation Loss @ 500 hours - temperature required | 25ml/25g |
| ASTM D2596 | Load Wear Index of Grease – Four Ball EP (Extreme Pressure) | 500 gr |
| ASTM D2596 | Load Wear Index of Grease – Welding Load ONLY | 250 gr |
| ASTM D2603 | Sonic Shear Stability -Select Reference Fluid A or B | 100ml |
| ASTM D2603 | Sonic Shear Stability at 40°C and 100°C Viscosities | 100ml |
| ASTM D2619 | Hydrolytic Stability | 200ml |
| ASTM D2622 | Sulfur with X-Ray Fluorescence (WDXRF) | 50ml |
| ASTM D2624 | Electrical Conductivity of Aviation Distillate Fuels | 500ml |
| ASTM D2625A | Falex Pin and V Block Test Procedure A Endurance Life – per run | 200 gr |
| ASTM D2625B | Falex Pin & V Block Test Procedure B Load Carrying Capacity | 200 gr |
| ASTM D2649 | Corrosion of Solid Film Oils | 200 gr |
| ASTM D2670 | Falex Pin & V Block Tooth Wear Test | 200ml |
| ASTM D2711 | Demulsibility Properties Procedure A or B | 1000ml |
| ASTM D2714 | Block in Ring Friction and Abrasion Test - per run | 200ml |
| ASTM D2782 | Oil Timken Load Carrying Test – pass/fail load | 1 gallon |
| ASTM D2782 | Oil Timken OK Load Bearing Test – Estimated 5 loads | 1 gallon |
| ASTM D2783 | Load Wear Index of Oil – Four Ball EP (Extreme Pressure) | 200ml |
| ASTM D2783 | Load Wear Index of Oil – Welding Load ONLY | 100ml |
| ASTM D2803 | Filiform Corrosion Resistance of Organic Coatings on Metal | per specification |
| ASTM D2834 | Non-Volatile Matter of Emulsions | 10 gr |
| ASTM D2878 | Vapor Pressure, Apparent | 50 gram |
| ASTM D2878 | Molecular Weight (by evaporation and vapor pressure) | 200ml |
| ASTM D2879 | Vapor Pressure with Isotenoscope – Single temperature – add $36,00 for each additional temperature | 10ml |
| ASTM D2879 | Vapor Pressure with Isoteniscope – Multipoint Graph | 10ml |
| ASTM D2893 | Oxidation Stability of EP (Extreme Pressure) Gear Oils Procedure A(95°C) or B(121°C) | 500ml |
| ASTM D2896 | Base Number – Perchloric Acid Method | 20 gr |
| ASTM D2942 | Total Acid of Halogenated Organic Solvents | 50 gram |
| ASTM D2981 | Oscillating Block in LFW-1 Ring | 50g/150ml |
| ASTM D2983 | Viscosity, Brookfield – need warmth | 100ml |
| ASTM D2989 | Acidity-Alkalinity of Halogenated Solvents/Mixtures | 200ml |
| ASTM D3065 | Flammability of Aerosol – Flame Projection | 3 box |
| ASTM D3065 | Flammability of Aerosol-Tag Open Cup Flash – Use ASTM D1310 | - |
| ASTM D3065 | Flammability of Aerosol – Closed Drum Test | 3 box |
| ASTM D3120 | Sulfur by Microculometry | 50ml |
| ASTM D3232 | Viscosity of Grease at High Temperature | 100 gram |
| ASTM D3233 | Falex Pin and V Block Procedure A or B | 150ml |
| ASTM D3238 | Carbon Distribution including D2502 molecular weight. by viscosity | 100ml |
| ASTM D3238 | Carbon Distribution including PLTL-85 molecular weight. according to boiling point | 100ml |
| ASTM D3242 | Acidity in Aviation Turbine Fuel | 200 gr |
| ASTM D3279 | Asphalten Content and Heptane Insolubles | 25 gr |
| ASTM D3336 | High Temperature Bearing Performance Setup Fee. (Additional $1/hour working time). | 20 gr |
| ASTM D3359 | Dry Film Adhesion with Tape | Customer supplied samples |
| ASTM D3401 | Moisture Content According to KFR: Amperometric or Coulometric | 25 gr |
| ASTM D3427 | Air Release Features, 25°C, 50°C or 75°C – choose temperature | 200ml |
| ASTM D3430 | Clarity and Yellowness by Colorimeter | 100ml |
| ASTM D3443 | TCTF Chloride in Ethane | 200ml |
| ASTM D3520 | Quenching Time of Heat Treatment Fluids | 500ml |
| ASTM D3524 | Diesel Fuel Dilution by GC (Gas Chromatography) Analysis | 10 gr |
| ASTM D3525 | Gasoline Dilution by GC (Gas Chromatography) Analysis | 10 gr |
| ASTM D3527 | Life Performance of Wheel Bearing Grease up to 120 hours. – Add $120 per hour over 1.00 hours. | 50 gram |
| ASTM D3634 | Monitor Chloride Ion in Engine Coolants | 100 gram |
| ASTM D3703 | Peroxide Number of Aviation Fuels | 20 gr |
| ASTM D3704 | Oscillating Friction Wear – Block in Ring | 20 gr |
| ASTM D3709 | Emulsion Stability of Water-Soluble Cutting Fluids | 50 ml |
| ASTM D3829 | Limit Pumping Per Temperature Test – temperature required | 100ml |
| ASTM D3867 | Nitrates and Nitrites in Water | 100ml |
| ASTM D3947 | Specific Heat with DSC – Deprecated in 1997 E1269 | 5 gr |
| ASTM D4048 | Copper Corrosion – grease | 50 gram |
| ASTM D4049 | Water Spray Off | 20 gr |
| ASTM D4052 | Single temperature Specific Gravity with Digital Density Meter | 30ml |
| ASTM D4052 | Density with Digital Density Meter at single temperature | 30ml |
| ASTM D4059 | PCB Content with DEXIL Field Test Kit. | 100ml |
| ASTM D4170 | Friction Wear Protection | 10 gr |
| ASTM D4170 | Friction Wear Protection, Low Temperature | 10 gr |
| ASTM D4172 | Four Ball Wear in Oil @ 1 hour. | 50ml |
| ASTM D4172 | Four Ball Wear in Oil @ 2 hour. | 50ml |
| ASTM D4172 | Four Balls of Oil Wear @ 4 hours. | 50ml |
| ASTM D4172 | Four Ball Wear of Oil w/Coefficient of Friction Graph @ 1 hour. | 50ml |
| ASTM D4172 | Four Ball Wear of Oil w/ Coefficient of Friction Graph @ 2 hours | 50ml |
| ASTM D4172 | Four Ball Wear in Oil with M-50 Steel Balls @1 hour. | 50ml |
| ASTM D4206 | Flash Point of Liquid Mixtures Using Small-Scale Open Container | 25ml |
| ASTM D4289 | Elastomer Compatibility NBR L (AMS3217/2C) AND CR (AMS3217/3B) | 400 gr |
| ASTM D4289 | Elastomer Compatibility NBR L (AMS3217/2C) OR CR (AMS3217/3B) | 200 gr |
| ASTM D4290 | Leakage of Wheel Bearing Greases | 200 gr |
| ASTM D4294 | Sulfur in Oil by EDXRF (X-Ray) | 50ml |
| ASTM D4308 | Electrical Conductivity of Liquid Hydrocarbons with Precision Meter | 200 ml |
| ASTM D4310 | Muddy Tendencies of Blocked Mineral Oil | 500ml |
| ASTM D4377 | Water Content, Karl Fischer (potentiometric) grease and oil | 50ml |
| ASTM D4425 | Oil Separation Koppers Method Setup Fee | 200 gr |
| ASTM D4425 | Oil Separation Koppers Method Working - charge per test interval | - |
| ASTM D4425 | Oil Removal with Only the Koppers Method | 100 gram |
| ASTM D4627 | Iron Sawdust Corrosion Test | 20 gr |
| ASTM D4628 | Atomic Absorption per Element (Ba, Ca, Zn, Cu, Fe) | 25 gr |
| ASTM D4636 | Oxidation and Corrosion Stability up to 72 hours | 250ml |
| ASTM D4636 | Oxidation and Corrosion Stability @ 168 hours | 250ml |
| ASTM D4636 | Oxidation and Corrosion Stability. Cost per sampling interval | - |
| ASTM D4683 | High Temperature/High Shear Viscosity with Tapered Bearing | 100ml |
| ASTM D4684 | Yield Voltage Per Temperature/Apparent Viscosity (MRV) – temperature required. | 100ml |
| ASTM D4693 | Low Temperature Torque of Wheel Bearing Greases | 25 gr |
| ASTM D4739 | Sum of Hydrochloric Acid Method and Base Number | 20 gr |
| ASTM D4742 | Thin Film Oxygen Uptake Test – TFOUT | 20 gr |
| ASTM D4890 | Color, APHA and Platinum Cobalt | 100ml |
| ASTM D4898 | Gravimetric Analysis with Filtration | 100ml |
| ASTM D4927 | Element Analysis (X-Ray) with WDXRF (Ba, Ca, P, S, Zn) | 50 ml |
| ASTM D4929 | Chlorides, Organic in Crude Oils | 100ml |
| ASTM D4950 | NLGI Series – see separate NLGI Series for pricing and sample quantity – Wheel Bearing Grease | - |
| ASTM D5133 | Brookfield, Scanning (+20°C to -40°C) | 300ml |
| ASTM D5183 | Coefficient of Friction, Step Loading Procedure | 50ml |
| ASTM D5185 | Determination of Multiple Elements in Lubricating Oils with ICP-OES | 50ml |
| ASTM D5275 | Shear Stability by Fuel Injection Test | 200ml |
| ASTM D5291 | Nitrogen Content (CHN Method) | 25 gr |
| ASTM D5293 | Visible Viscosity - temperature required with Cold Start Simulator. | 30ml |
| ASTM D5306 | Flame Spread | 50ml |
| ASTM D5453 | Sulfur Content by UV Fluorescence | 100ml |
| ASTM D5483 | Oxidation Stability of Greases with PDSC | 1 gr |
| ASTM D5554 | Iodine value | 50 gram |
| ASTM D5620 | Falex Pin & V Thin Film Lubricants and Dry Film | 150ml |
| ASTM D5621 | Sonic Shear Stability | 100ml |
| ASTM D5621 | Sonic Shear Stability at 40°C and 100°C viscosities | 100ml |
| ASTM D5762 | Nitrogen Content by Chemiluminescence | 100ml |
| ASTM D5768 | Iodine Count, WISE | 50ml |
| ASTM D5969 | Rust Prevention in Synthetic Seawater | 25 gr |
| ASTM D6082 | Foam Properties – High Temperature | 600ml |
| ASTM D6138 | EMCOR Rust Test (per bed) (see also IP 220, DIN 51802) | 20ml/20g |
| ASTM D6181 | Turbidity with HACH Turbidmeter | 100ml |
| ASTM D6184 | Oil Separation, Wire Cone Method | 100 gram |
| ASTM D6185 | Compatibility of Dual Grease Blends (10/90, 50/50, 90/10) | 5 pounds |
| ASTM D6185 | High Temperature Storage Stability @ 72 hours. | 2 lbs |
| ASTM D6186 | Oxidation Stability of Oils with PDSC | 1 gr |
| ASTM D6200 | Cooling Properties of Quenching Oils | 2000ml |
| ASTM D6278 | Shear Stability with Diesel Injector Attachment | 500ml |
| ASTM D6304 | Water Content of Oils, Karl Fischer (Culometric) | 50ml |
| ASTM D6334 | Sulfur in Gasoline (X-Ray) with WDXRF | 50 ml |
| ASTM D6351 | Low Temperature Stability, 72 hours. @ -25°C | 100ml |
| ASTM D6375 | NOACK Volatility with TGA (thermogravimetric analysis) | 1ml |
| ASTM D6376 | Trace Elements in Petroleum Odor with WDXRF (X-Ray) | 50 ml |
| ASTM D6417 | Volatility due to capillary GC | 10ml |
| ASTM D6443 | Chlorine, Calcium, Sulfur, Copper, Phosphorus, Magnesium and Zinc with WDXRF (X-Ray) | 50ml |
| ASTM D6482 | Cooling Properties of Aqueous and Water-Soluble Materials | 4000ml |
| ASTM D6547 | Abrasiveness, Bimetallic couple | 25ml |
| ASTM D6786 | Particle Counting Using Automatic Optical Particle Counters | 1 points |
| ASTM D6793 | Stack Module, Pressure Cylinder Technique @ 40°C | 200ml |
| ASTM D7303 | Metal Analysis with ICP-OES Using Microwave Digestion | 10 gr |
| ASTM D7342 | Shear Stability of Grease in the Presence of Water: Procedure A (100.000 Strokes) | 1 pounds |
| ASTM D7342 | Shear Stability of Grease in the Presence of Water: Procedure B (Roll Stability) | 1 pounds |
| ASTM D7373 | Biodegradability of Lubricants | 10ml |
| ASTM E70 | pH of Aqueous Solutions with Glass Electrodes | 50ml |
| ASTM E202 | Analysis of Ethylene & Propylene Glycols | 1 gallon |
| ASTM E203 | Water Content by KFR Titration | 25ml |
| ASTM E659 | Auto Ignition Temperature - Hot Flame | 5ml |
| ASTM E1064 | Water Content, Karl Fischer (coulometric) oil | 25 gr |
| ASTM E1131 | Evaporation Loss by TGA (thermogravimetric analysis) per MIL-PRF-10924 or MIL-PRF-32073 | 1 gr |
| ASTM E1252 | Infrared Spectrograph - FTIR | 1 gr |
| ASTM E1269 | Specific Heat with DSC (multiple temperatures single charge) | 5 gr |
| ASTM E1356 | Glass Transition Temperature with Differential Scanning Calorimetry (DSC) | 10 ml |
| ASTM E1641 | Weathering Kinetics by Thermogravimetry (TGA) | 10 gr |
| ASTM E1858 | Oxidation Induction Time of Hydrocarbons with DSC | 10 gr |
| ASTM E1868 | Loss to Drying by Thermogravimetry (TGA) for determination of volatile organic compounds (VOCs) | 10 gr |
| ASTM E1868 SCAQMD Rule 1144 | Loss of Drying by Thermogravimetry (TGA) – SCAQMD Rule 1144 | 50 ml |
| ASTM E2009 | Oxidation Onsent by DSC | 10 gr |
| ASTM E2071 | Calculation of Heat of Sublimation of Evaporation or Vapor Pressure Data | See ASTM D2879 |
| ASTM E2626 | Calcium Content According to ICP OES or AA | 10 gr |
| ASTM F312 | Particulate Contamination (Recommend FTM-3012) | 1 liter |
| ASTM F313 | Gravimetric Contamination (Recommend FTM-3010) | 1 liter |
| ASTM F483 | Total Immersion Corrosion of Refrigerants and De-icing Compounds | 3 gallon |
| ASTM F1110 | Sandwich Corrosion Test | 100ml |
| 101-04 | Oxidation Stability at 500 hours, Ford Method (per run) | 500 gr |
| BJ 113 | Film Strength Endurance, Ford Method | 10 gr |
| BT 7 | Navistar International Freight, Water Tolerance | 100ml |
| BT 9 | Navistar International Freight, Moisture Corrosion | 100ml |
| BT 10 | Navistar International Freight, Oxidation and Corrosion | 200ml |
| BT 13 | Navistar International Transport, Stability Heating Test | 500ml |
| BT 20 | Navistar International Freight, Cargo Handling Capability | 200ml |
| BT 30 | Navistar International Freight, Foaming Features | 1 liter |
| BT 36 | Navistar International Freight, Petroleum Ether Insolubles | 100 gram |
| MSK L-85-T-99 | DSC (Differential Scanning Calorimetry) | 25 gr |
| CTM 0225B | Shell 4-Ball, Average Hertz Load by Dow Corning Method | 200ml |
| CTM 0351B | Scar Abrasion with 4-Ball, Dow Corning Method | 200ml |
| DIN-51350 5 | Four Ball Wear - Method A or Method B or Method C | 50 gram |
| DIN-51350 5 | Four Ball Wear with Coefficient of Friction - Method A or Method B or Method C | 50 gram |
| DIN 51381 | Air Release Specifications Per Temperature | 200ml |
| DIN 51587 | Aging Behavior of Steam Turbine Oils | 500ml |
| DIN 51802 | EMCOR Rust Test (per bed) | 20ml |
| DIN 51805 | Kesternich Technique, Flow Pressure – temperature required | 100 gram |
| DIN 51807 | Static Water Resistance at 40°C | - |
| DIN 51807 | Static Water Resistance at 90°C | - |
| DIN 51817 | Oil Separation @ 168 hours. | 100 gram |
| DIN 51817 | Oil Separation @ 18 hours. | 100 gram |
| DIN 53169 | pH @ 20°C | 100ml |
| DIN 53521 | Rubber and Elastomer Behavior | 500 gr |
| DO-30 | Flame Projection, Health Canada | 3 box |
| EDXRF | Elements with Energy Dissipative X-Ray (EDXRF) | 50ml |
| EN 16028 Annex B | Water Washing | 100 gram |
| EPA 24 | Volatile Matter | 25 gr |
| EPA 5530 | Phenol Content | 1 points |
| FTM-202 | Cloud Density, Barium Chloride Technique | 200ml |
| FTM-313 | Penetration, Machined Stability (100.000 Strokes) | 1 pints |
| FTM 321 (FED-STD-791 Method 321.2) | Oil Separation, Wire Cone Method | 100 gram |
| FTM-335 | Navy Gear Wear Test | 20 gr |
| FTM-350 | Evaporation Loss @ 22 hours - temperature required | 25ml/25g |
| FTM-350 | Evaporation Loss @ 6 1/2 hours – temperature required | 25ml/25g |
| FTM-352 | Wick Ignition - Effect of Evaporation on Flammability | 100ml |
| FTM-353 | evaporation | 25ml |
| FTM-595 | View | 100ml |
| FTM-3005 | Dirt Number of Greases | 5 gr |
| FTM-3007 | Water Displacement and Stability | 200ml |
| FTM-3009 | Particulate Contamination, Filtration Time | 200ml |
| FTM-3010 | Gravimetric Contamination and Ash Residue by Filtration | 1 liter |
| FTM-3012 | Particulate Contamination with HIAC | 1 points |
| FTM-3013 | Particulate Contamination: Gravimetric | 1 pints |
| FTM-3101 | Number of precipitation | 100ml |
| FTM-3213 | Static Foam Test | 500ml |
| FTM-3411 | Thermal Stability and Corrosion. 96 hours @ 525°F – cost per test cell. Duplicate runs by citation | 100ml |
| FTM-3432 | Elastomer Compatibility of FKM Elastomer (AMS 3217/4A) | 500ml |
| FTM-3433 | Navy S Silicone Rubber, Swelling, Hardness and Tensile Strength | 500ml |
| FTM-3456 | Channel Point of Lubricating Oils | 1 liter |
| FTM-3457 | Hydrolytic Stability | 200ml |
| FTM-3458 | Stability, Low Temperature @ 72 hours; visual blur | 200ml |
| FTM-3459 | Stability, Low Temperature @ 72 hours; Barium Turbidity Standard | 200ml |
| FTM-3463 | Immersion of Oils in Boiling Water | 5 gr |
| FTM-3465 | Storage Stability @12 months | 1 gallon |
| FTM-3467 | Storage Stability 40 months at 6°C (ASTM D217 unstudied and studied penetration) | 2 lbs |
| FTM-3480 | Volatility 24 hours. | Sample provided by customer |
| FTM-3603 | Swelling of rubber NBR-L (AMS3217/2C) in 168 hours | 400ml/500g |
| FTM-3604 | Swelling of rubber NBR-H (AMS3217/1B) @ 168 hours | 400ml/500g |
| FTM-3604 | Swelling of rubber NBR-H (AMS3217/1B) or FKM (AMS3217/4A) @ 72 hours | 400ml/500g |
| FTM-3710 | Molybdenum Disulfide Purity - Powders | 10 gr |
| FTM-3720 | Molybdenum Disulfide Content – Soap Greases | 20 gr |
| FTM-3722 | Molybdenum Disulfide Content – Non-Soap Greases | 20 gr |
| FTM-3816 | Film Appearance and Thickness | 1 points |
| FTM-4001.2 | Salt Spray Corrosion at 48 hours (see also ASTM B117) | 250ml |
| FTM-4001.2 | Salt Spray Corrosion @ 100 hours | 1 points |
| FTM-4001.2 | Salt Spray Corrosion @ 300 hours | 1 points |
| FTM-4001.2 | Salt Spray Corrosion @ 500 hours | 1 points |
| FTM-4001.2 | Salt Spray Corrosion @ 1000 hours | 1 points |
| FTM-4371 | Index of Refractive @ 20°C or 25°C – choose temperature | 10ml |
| FTM-5304 | Corrosion of Copper Grease | 100 gram |
| FTM-5305 | Silver and Bronze Corrosion of Petroleum | 500ml |
| FTM-5306 | Abrasiveness of Cutting Fluids | 50ml |
| FTM-5307 | Oxidation and Corrosion Stability @ 72 hours | 250ml |
| FTM-5307 | Oxidation and Corrosion Stability @ 168 hours | 250ml |
| FTM-5307 | Oxidation and Corrosion Stability. Cost Per Sampling Interval | n/a |
| FTM-5308 | Oxidation and Corrosion Stability @ 72 hours | 250ml |
| FTM-5308 | Oxidation and Corrosion Stability @ 168 hours | 250ml |
| FTM-5309 | Copper Corrosion of Grease | 50 gram |
| FTM-5321 | Lead Corrosion, SOD Method | 600ml |
| FTM-5322 | Galvanic Corrosion, Clip Test/Salt Spray, 48 hours – Grease | 50 gram |
| FTM-5322 | Abrasiveness of Oil on a Bimetallic Pair | 25ml |
| FTM-5329 | Humidity Cabinet Test @ 100 hours | 500ml |
| FTM-5329 | Humidity Cabinet Test @ 400 hours | 500ml |
| FTM-5329 | Humidity Cabinet Test @ 900 hours | 500ml |
| FTM-5329 | Humidity Cabinet Test @ 1000 hours | 500ml |
| FTM-5331 | Sulfuric Acid – Salt Spray | 500ml |
| FTM-5414 | Grease Fuel Resistance | 20 gr |
| FTM-5415 | Resistance of Grease to Aqueous Solutions | 40 gr |
| FTM-5421 | Ash Content | 100 gram |
| FTM-6052 | High temperature. High Pressure Spray Ignition | 1 liter |
| FTM-6053 | Manifold Ignition @ 1300°F | 100ml |
| FTM-6503 | Shell 4 Ball Average Hertz Load (Extreme Pressure) | 50 gram |
| FTM-7501 | Low Temperature Torque @ -54°C, only 2 spindles | 50 gram |
| GM 4298-P | Neutral Salt Spray, General Motors Specification | 500ml |
| GM 9030-P | Oil Separation, General Motors Specification | 500 gr |
| IEC 811 5 1 | Oil Separation | 100 gram |
| IP 112 | Anti-Corrosion Properties | 100 gram |
| IP 121 | Oil Separation, Mesh Cone Static Method @ 42 hours. | 100 gram |
| IP 121 | Oil Separation, Mesh Cone Static Method @ 168 hours. | 100 gram |
| IP 142 | Pressure Vessel Oxidation Test @ 100 hours. | 50 gram |
| IP 220 | EMCOR Bearing Test (per bearing) (see also D6138 or DIN 51802) | 20 gr |
| ISO 760 | Moisture by Weight | 25 gr |
| ISO 1817 | Rubber Swelling 168 hours. @ 100°C | 500 gr |
| ISO 2160 | Copper Corrosion – takes time and temperature | 100ml |
| ISO 2176 | Dropping Point | 10 gr |
| ISO 2211 | Color of Clear Liquids | 100ml |
| ISO 2811 | Density-Grease Pycnometer – needs temperature | 50 gram |
| ISO 3838 | Density @ 25°C | 50 gram |
| ISO 4406 | Particle Contamination, HIAC Particle Counter, ISO Cleaning Code | 1 pints |
| ISO 6072 | Elastomer Compatibility @ 168 hours. (FKM: AMS-3217/4A) | 500ml |
| ISO 6072 | Elastomer Compatibility @ 1000 hours. (FKM: AMS-3217/4A) | 500ml |
| ISO 6618 | Acid Number | 50ml |
| ISO 7120 | Anti-rust | 100ml |
| ISO 8573 | Infrared Spectrograph - FTIR | iz |
| ISO 11007 | EMCOR Bearing Test (per bearing) | 20g |
| ISO 15029 | Spray Ignition Features | 1 liter |
| JDQ 36B | Rolling Stability, John Deere Method | 200 gr |
| JDQ 47A | Rolling Stability, John Deere Method, Procedure A | 200 gr |
| JIS K2220 | Harmful Particles, Japanese Industry Standard | 100 gram |
| JIS K2220 | Low Temperature Torque, Japanese Industry Standard | 10 gr |
| K95400 | Lincoln Ventilation Meter, Room Temperature - 0°C | 1 pounds |
| K95400 | Lincoln Ventmeter, Below 0°C | 1 pounds |
| LFW-1 | Oscillating Friction and Wear DOD-G-24508A | 25 gr |
| LT-37 | Mobility of Greases US Steel Method @ 77°F | 1 pounds |
| LT-37 | Mobility of Greases US Steel Method 0 - 60°F | 1 pounds |
| LT-37 | Mobility of Greases US Steel Method Below 0°F | 1 pounds |
| LT-46 | Bethlehem Steel Combo Test Part A and Part B combined | 1 pounds |
| LUXURIOUS 5.3.1 | Aging Features | See ISO 4404-1 |
| LUXURIOUS 5,9 | Corrosion Prevention | See ISO 4404-1 |
| LUXURIOUS 7.10 | Evaporation @ 168 hours for HFC Liquids. | See ISO 4404-1 |
| LUXURIOUS 7.14.1 | Rolling Fatigue Resistance | See ISO 4404-1 |
| LUXURIOUS 7.6 | Rust Prevention Procedure | See ISO 4404-1 |
| NAS1638 | Particulate Contamination with HIAC | 1 points |
| NLGI GA Series | ASTM NLGI GA Series - Wheel Bearing Grease using ASTM D2265 Option | 2,5 pounds |
| NLGI GA Series | ASTM NLGI GA Series - Wheel Bearing Grease using ASTM D566 Option | 2,5 pounds |
| NLGI GB Series | ASTM NLGI GB Series – Wheel Boring Grease using ASTM D2265 Option | 4 pounds |
| NLGI GB Series | ASTM NLGI GB Series - Wheel Bearing Grease using ASTM D566 Option | 4 pounds |
| NLGI GC Series | ASTM NLGI GC Series - Wheel Bearing Grease using ASTM D2265 Option | 5 pounds |
| NLGI GC Series | ASTM NLGI GC Series - Wheel Bearing Grease using ASTM D566 Option | 5 pounds |
| NLGI LA/GA Series | ASTM NLGI LA/GA Series – Wheel Bearing Grease using ASTM D2265 Option | 3 pounds |
| NLGI LA/GA Series | ASTM NLGI LA/GA Series – Wheel Bearing Grease using ASTM D566 Option | 3 pounds |
| NLGI LA/GB Series | ASTM NLGI LA/GB Series – Wheel Bearing Grease using ASTM D2265 Option | 4 pounds |
| NLGI LA/GB Series | ASTM NLGI LA/GB Series – Wheel Bearing Grease using ASTM D566 Option | 4 pounds |
| NLGI LA / GC Series | ASTM NLGI LA/GC Series – Wheel Bearing Grease using ASTM D2265 Option | 5 pounds |
| NLGI LA / GC Series | ASTM NLGI LA/GC Series – Wheel Bearing Grease using ASTM D566 Option | 5 pounds |
| NLGI LA Series | ASTM NLGI LA Series – Wheel Bearing Grease using ASTM D2265 Option | 3 pounds |
| NLGI LA Series | ASTM NLGI LA Series – Wheel Bearing Grease using ASTM D566 Option | 3 pounds |
| NLGI LB/GA Series | ASTM NLGI LB/GA Series using ASTM D2265 Option – Wheel Bearing Grease | 4,5 pounds |
| NLGI LB/GA Series | ASTM NLGI LB/GA Series using ASTM D566 Option – Wheel Bearing Grease | 4,5 pounds |
| NLGI LB/GB Series | ASTM NLGI LB/GB Series – Wheel Bearing Grease using ASTM D2265 Option | 5 pounds |
| NLGI LB/GB Series | ASTM NLGI LB/GB Series – Wheel Bearing Grease using ASTM D566 Option | 5 pounds |
| NLGI LB/GC Series | ASTM NLGI LB/GC Series - Wheel Bearing Grease using ASTM D2265 Option | 5 pounds |
| NLGI LB/GC Series | ASTM NLGI LB/GC Series - Wheel Bearing Grease using ASTM D566 Option | 5 pounds |
| NLGI LB Series | ASTM NLGI LB Series - Wheel Bearing Grease using ASTM D2265 Option | 4,5 pounds |
| NLGI LB Series | ASTM NLGI LB Series - Wheel Bearing Grease using ASTM D566 Option | 4,5 pounds |
| PLTL-03 | Film Characteristics in accordance with MIL-PRF-32033/27617 | 10ml |
| PLTL-04 | Craftsmanship and Texture | 100 gram |
| PLTL-05 | Flow Point Test MIL-C-21567 | 500 gr |
| PLTL-06 | Stickiness MIL-PRF-18458 | 100 gram |
| PLTL-07 | Low Temperature Flexibility MIL-PRF-18458 | 100 gram |
| PLTL-08 | Crack Test | n/a |
| PLTL-12 | Linear Expansion Coefficient | 1 piece |
| PLTL-13 | Low Temperature Turbidity MIL-DTL-17111 | 200ml |
| PLTL-15 | Water Fender MIL-DTL-17111 | 200ml |
| PLTL-18 | Moisture by Weight SAE AMS-M-7866 | n/a |
| PLTL-19 | Water Soluble SAE AMS-M-7866 | 50 gram |
| PLTL-20 | Oil Content by Acetone Extraction SAE AMS-M-7866 | 50 gram |
| PLTL-21 | Total Insoluble SAE AMS-M-7866 | 50 gram |
| PLTL-23 | Steel and Copper Corrosion SAE AMS-M-7866 | 50 gram |
| PLTL-24 | Fineness, Fischer Bottom Sieve Sizer SAE AMS-M-7866 | 100 gram |
| PLTL-30 | High temperature. Stability – specify temperature in accordance with MIL-PRF-83282, MIL-PRF-87252, MIL-PRF-87257. | 100ml |
| PLTL-31 | Total Solids Type I MIL-L-23398 | 100 gram |
| PLTL-36 | Solubility SAE-AMS-8660 (MIL-S-8660) | 100 gram |
| PLTL-37 | Film Stability and Corrosion in Steel MIL-G-6032 SAE AMS-G-6032 | 20 gr |
| PLTL-39 | Flammability, Dow Corning #4 Compound SAE-AS 8660 4.6.4 | 50 gram |
| PLTL-40 | Low Temperature Torque @ -65°F Dow Corning #4 Compound SAE-AS 8660 ASTM D1478 | 50 gram |
| PLTL-41 | Corrosive Effects-Metals, Dow Corning #4 Compound SAE-AS 8660 4.6.5.1.1 | 50 gram |
| PLTL-42 | Corrosive Effects-Non-Metal Dow Corning #4 Compound SAE-AS 8660 4.6.5.1.2 | 250 gr |
| PLTL-44 | Evaporation Leakage MIL-S-8660 SAE-AS 8660 FTM 321 | 50 gram |
| PLTL-45 | Total Solids Type II MIL-L-23398 | 100 gram |
| PLTL-46 | Waterproof Sealing MIL-S-8660 SAE-AS 8660 4.6.9 | 50 gram |
| PLTL-48 | Oxidation and Corrosion Stability @ 72 hours. MIL-DTL-17111 | - |
| PLTL-48 | Oxidation and Corrosion Stability @ 336 hours. MIL-DTL-17111 | 200ml |
| PLTL-49 | Storage Stability @ 6 months | 200ml |
| PLTL-50 | Corrosion, Steel 24 hours @ 650°F | 100 gram |
| PLTL-54 | Salt Mist Exposure MIL-C-23411 | 200ml |
| PLTL-56 | Removability MIL-C-23411 | 100ml |
| PLTL-57 | Swelling of Rubber MIL-L-19701 | 500 gr |
| PLTL-58 | microscopic examination | 10g |
| PLTL-59 | Humidity Cabinet @ 20 hours, Hughes Aircraft Co. Specification | 500ml |
| PLTL-60 | High/Low Temperature Stability MIL-C-6529 | 200ml |
| PLTL-61 | GC Analysis | 1 gr |
| PLTL-64 | Film Thickness per MIL-C-23411 | 100ml |
| PLTL-66 | Effect on Paint MIL-C-23411 | 1 can |
| PLTL-67 | Drying Solid Film Lubricants MIL-C-23411 | 100ml |
| PLTL-70 | Corrosion MIL-C-23411 | 500ml |
| PLTL-72 | Aniline Point MIL-DTL-17111 | 200ml |
| PLTL-73 | According to DSC, Thermal Conductivity (charge per temperature) indicates temperature. 38°C to 100°C typical | 2 gr |
| PLTL-75 | Water Sensitivity MIL-PRF-46170 | 500ml |
| PLTL-76 | Compatibility of Oils @ High and Low Temperatures – per customer supplied Reference Oil | 1 l each |
| PLTL-78 | Infrared Spectrograph - FTIR | iz |
| PLTL-80 | biological activity | 10ml |
| PLTL-81 | Oil Separation, Nickel Cone | 100 gram |
| PLTL-82 | Soxhlet Extraction of Grease | 20 gram |
| PLTL-83 | Suppression MIL-C-15074 | 1 can |
| PLTL-84 | Oil Separation, Pressure Cylinder US Steel Method | 100 gram |
| PLTL-85 | Molecular Weight, Boiling Point Raising Technique | 20ml |
| PLTL-86 | Cincinnati Milacron Thermal Stability Procedure A or Procedure B | 300ml |
| PLTL-87 | Iron Contamination by Magnetic Extraction | 100ml |
| PLTL-88 | Chlorine by Microculometry | 20 gr |
| PLTL-90 | Density-Grease Pycnometer- specify temperature | 20 gr |
| PLTL-91 | Water Displacement MIL-C-23411 | 1 can |
| PLTL-92 | Coefficient of Expansion with pycnometer – specify temperature | 25ml |
| PLTL-95 | Friction Analysis, Rolling Contact | 20 gr |
| PLTL-97 | Brookfield Viscosity – specify temperature (See Guide # M/92-161-G894 | 100ml |
| PLTL-99 | Permissible Weight Variation According to MIL-PRF-372 | 1 can |
| PLTL-100 | Hydrobromic Acid Neutralization MIL-C-6529 | 1000ml |
| PLTL-101 | Cobalt Chloride Test MIL-C-6529 | 1000ml |
| PLTL-102 | Falex Pin and V Block Load Carrying Capacity according to MIL-PRF-63460 | 25ml |
| PLTL-104 | Corrosion 7 days @ 54°C MIL-PRF-63460 | 500ml |
| PLTL-105 | M8 & M9 Chemical Indicator Test Paper MIL-PRF-63460 | 50ml |
| PLTL-107 | Fire Residue Removal MIL-PRF-63460 (Price includes 3 runs) | 100ml |
| PLTL-108 | DSC Thermogram | 1 gr |
| PLTL-109 | High and Low Temperature Accelerated Stability in accordance with MIL-PRF-5606 and MIL-PRF-87257 | 1 liter |
| PLTL-110 | Vacuum Extraction of Oil from Greases | 50 gram |
| PLTL-111 | Low Temperature Stability per MIL-C-3150 | 100ml |
| PLTL-112 | Working Stability per MIL-L-19701 | 8 oz |
| PLTL-113 | Oxidation Stability MIL-PRF-14107 | - |
| PLTL-114 | Low Temperature Stability MIL-14107/6085/7870/6083 | 201 |
| PLTL-115 | Stain: Original Oil Accelerated MIL-C-22235 | 179 |
| PLTL-116 | Stain: 5% Water Emulsion, Accelerated MIL-C-22235 | 250 |
| PLTL-118 | Corrosion MIL-C-15074 | 500ml |
| PLTL-120 | Stability for MIL-C-15074 | 192 |
| PLTL-122 | Emulsification Resistance MIL-PRF-85336 | - |
| PLTL-123 | Blue Soap Test | 200 gr |
| PLTL-124 | Low Temperature Torque, Ministry of DefenseDEF STAN 05-50 Part 62 | Call us |
| PLTL-126 | Apparent Viscosity for MIL-PRF-85336 | 192 |
| PLTL-127 | Rust Prevention per MIL-PRF-85336 | 287 |
| PLTL-128 | Rust Prevention with MIL-L-46000 | - |
| PLTL-129 | Stability for MIL-PRF-3150 | 228 |
| PLTL-130 | Humidity Cabinet @ 6529 days per MIL-C-14 | 422 |
| PLTL-131 | Sonic Shear Stability MIL-PRF-5606 & 6083 | 100ml |
| PLTL-132 | Glass Fiber Content by Pyrolysis | 98 |
| PLTL-133 | Fat Bleeding Processed by the Meritor Method | 243 |
| PLTL-134 | pH, Oil Concentration, Chlorides, Emulsion Type | 100ml |
| PLTL-135 | Storage Stability per MIL-PRF-85336 | 250g |
| PLTL-136 | USA Steel Method, Static Heat Test | - |
| PLTL-137 | Stickiness Cup and Bearing TSK2509G-22 – Toyota Specification | - |
| PLTL-138 | Flow Output @ High Pressure TSK2509G-22 – Toyota Specification | 108 |
| PLTL-139 | Hiding Power MIL-PRF-3572 | - |
| PLTL-140 | vapor density | 50 gram |
| PLTL-142 | Salt Water Emission @ 20 hours. MIL-PRF-21260 | - |
| PLTL-143 | Residue and Flowability | 50ml |
| PLTL-144 | Solubility MIL-C-21567 | 1 piece |
| PLTL-145 | water solubility | 78 |
| PLTL-147 | Evaporative Loss, DaimlerChrysler Spec. AD 272 | 25 gr |
| PLTL-148 | Centrifugal Bleeding, ExxonMobil Method | 94 |
| PLTL-149 | Oxidation Start Temperature | 5 gr |
| PLTL-150 | Heating according to MIL-PRF-372 | 43 |
| PLTL-151 | Fragrance for MIL-PRF-372 | 44 |
| PLTL-152 | Container Corrosion per MIL-PRF-372 | - |
| PLTL-154 | Melting point | 94 |
| PLTL-155 | Compliance for MIL-PRF-81322 | - |
| PLTL-156 | Reichert test | 100ml |
| PLTL-157 | Sulfur Acid Salt Spray MIL-C-81309 | - |
| PLTL-159 | Gas Generation, Cylinder Ring on Block API 5A2/5A3/ISO13768 | 227 |
| PLTL-160 | Brine Emission, Lockheed Martin Spec. WS6788C | 179 |
| PLTL-161 | Copper Strip, Lockheed Martin Spec WS6788C | - |
| PLTL-162 | Penetration Test for WD-40 | - |
| PLTL-163 | Storage Stability, 168 hours. @ 50°C according to MIL-L-19701 | - |
| PLTL-164 | Storage Stability, 23699 weeks at -18°C per MIL-PRF-6 | - |
| PLTL-165 | Pumpability Test @ -25°C | 219 |
| PLTL-166 | Falex Test for MIL-L-46000 | 200ml |
| PLTL-167 | Resolution Stability | 45 |
| PLTL-168 | Solvent Extraction of Base Oil | 104 |
| PLTL-169 | Water Washing MIL-PRF-17672/17331 D665B | n/a |
| PLTL-170 | Thermal Stability with DSC | 250 |
| PLTL-171 | Microworker for Lubricating Grease | - |
| PLTL-173 | Corrosion Protection (Vapor Phase) MIL-PRF-46002 | 420 |
| PLTL-174 | Compliance Test, Caterpillar Specification 1E2359 | 155 |
| PLTL-175 | High Temperature Evaporation Test | - |
| PLTL-176 | Analysis of Metal Hydroxides | 219 |
| PLTL-177 | Phosphite Content MIL-TT-T-656C | - |
| PLTL-178 | Shear Stability MIL-PRF-23699 | 100ml |
| PLTL-179 | Corrosive Action, Girling International Specification | - |
| PLTL-180 | Atomic Absorption, Aqueous, Copper and Iron Analysis | 157 |
| PLTL-180M | Metals by Atomic Absorption (AA) | n/a |
| PLTL-181 | Dynamic Base Oil Solubility in Fluids by Mixed Vial Test | 192 |
| PLTL-182 | Separation of Bulk Greases from Oil, 12-day test – per temperature. | 356 |
| PLTL-183 | Full-Scale Pumpability | - |
| PLTL-184 | Acid Neutralization according to MIL-PRF-21208 4.3.3.9.3 | n/a |
| PLTL-185 | Static Corrosion MIL-H-22072 | 100ml |
| PLTL-186 | Mixing Corrosion MIL-H-22072 | 500ml |
| PLTL-187 | Static Gloss 40 CFR 435 Appendix 1 Subpart A | 50ml |
| PLTL-192 | Oil Homogeneity in accordance with MIL-DTL-XX509 | 157 |
| PLTL-193 | Freezing according to MIL-PRF-372 | - |
| PLTL-194 | Evaporation, 4 hours. @ 70°C according to MIL-H-22072 | - |
| PLTL-196 | GOST Oxidation | 150ml |
| PLTL-197 | Effect on Poly-Amide Insulation Wire | 200ml |
| PLTL-198 | Nail Climbing Test | - |
| PLTL-199 | Abrasive Cleaning per MIL-PRF-372D | 25ml |
| PTI-Table 1 # 8 | Sheath Tensile Strength Compatibility (polypropylene or polyethylene) | 500 gr |
| SAE 749 | Particulate Contamination | 100ml |
| SAE ARP 5088A | Total Acid Count | 100ml |
| SAE ARP 598B | Number of Particles | 200ml |
| SAE J1165 | ISO Cleaning Code, ISO Solid Contaminant Code | 100ml |
| TM-52-1 | Caustic Cleansing Test, Fisher Body Spec. | 100 gram |
| TM-52-6 | Bleed Test, Fisher Body Spec. (per temperature) | 100 gram |
| TS2-30-02 | High Temperature Stability, Girling International Specification | 500 gr |
| UN III Chapter 31 | Indoor Ignition Test | 3 box |
| USP 23 | USP Specific Gravity of Petrolatum | 100 gram |
| USP Whiskey. | Petrolatum USP Brookfield Viscosity | 100 gram |
| USS-1RT | US Steel Grip Test (per run) | 20 gr |
| WQTM-611 | Particle Count, BASF Method | 50 gram |
| WS6788C | Copper Strip, Short Term High Temperature, Lockheed Martin Spec. | 200 gr |
To get an appointment, to get more detailed information or to request an evaluation, you can ask us to fill in our form and reach you.
EUROLAB reporting and certification activities, United Accreditation Foundation (UAF), Turkish Accreditation Agency (TÜRKAK), Enterprise Accreditation Foundation (EAF) based on the accreditation provided by its institution. The Enterprise Accreditation Foundation (EAF) is also a signatory to the United Nations (UN GLOBAL COMPACT).
