ISIRI (Iranian Standards and Industrial Research Institute) Tests Part 12
The ISIRI (Iranian Institute of Standards and Industrial Research) standard testing evaluates the conformity of a product by a designated laboratory.
-testleri-bolum-12.jpg)
This standard is limited and is determined by ISIRI test standard, classification according to product type and checking compliance with the relevant standard. In order to obtain the correct test result, separate test conditions must be presented according to each test standard.
- ISIRI 7129-3;Test methods for solar collectors - Part 3 : Thermal performance of unglazed liquid heating collectors (sensible heat transfer only) including pressure drop
- ISIRI 7131-1; Varnishes used for electrical insulation - Part 1: Definitions and general requirements
- ISIRI 7131-2; Varnishes used for electrical insulation Part 2: Test methods
- ISIRI 7137-1;Basic principles for graphic symbols for use in equipment Part 1: Creating symbol originals
- ISIRI 7137-2; Basic principles for graphic symbols for use in equipment - Part 2: Shape and use of arrows
- ISIRI 7137-3;Basic principles for graphical symbols for use in equipment Part 3: Guidelines for the application of graphical symbols
- ISIRI 7140-1; Road vehicles - Electrical disturbances from narrowband radiated electromagnetic energy - Components test methods - Part 1: General and definitions
- ISIRI 7140-2; Road vehicles - Electrical disturbances from narrowband radiated electromagnetic energy - Component test methods - Part 2: Absorbent lined room
- ISIRI 7140-3; Road vehicles - Electrical disturbances from narrowband radiated electromagnetic energy - Component test methods - Part 3: Transverse electromagnetic mode (TEM) cell
- ISIRI 7140-4; Road vehicles - Electrical disturbances from narrowband radiated electromagnetic energy - Component test methods - Part 4 : Bulk Current Injection (BCI)
- ISIRI 7140-5; Road vehicles - Electrical disturbances from narrowband radiated electromagnetic energy - Component test methods - Part 5: Strip track
- ISIRI 7140-7; Road vehicles - Electrical disturbances from narrowband radiated electromagnetic energy - Component test methods - Part 7: Direct injection of radio frequency (RF) power
- ISIRI 7140-8; Road vehicles -‐ Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -‐ Part 8: immunity to magnetic fields
- ISIRI 7141-1;Lung ventilators for medical use Part 3: Special requirements for emergency and transport ventilators
- ISIRI 7141-2;Lung ventilators for medical use Part 2: Special requirements for home care ventilators
- ISIRI 7141-3;Lung ventilators for medical use Part 3: Special requirements for emergency and transport ventilators
- ISIRI 7171-1;Water Quality - Suitability of non-metallic products for use in contact with water for human consumption in terms of effects on water quality - Part 1: Specifications
- ISIRI 7171-2-1;Water - Suitability of non-metallic products for use in contact with water for human consumption in terms of effects on water quality‐ Part 2: Test methods‐ Part 2.1: Test samples
- ISIRI 7171-2-2-1;Water - Suitability of non-metallic products for use in contact with water for human consumption in terms of effects on water quality‐ Part 2: Test methods‐ Part 2.2: Odor and taste of water‐ Subsection 2.2.1: general
- ISIRI 7171-2-2-2;Water - Suitability of non-metallic products for use in contact with water for human consumption in terms of effects on water quality‐ Part 2: Test methods‐ Part 2.2: Odor and taste of water‐ Subsection 2.2.2: method o
- ISIRI 7171-2-2-3;Water - Suitability of non-metallic products for use in contact with water for human consumption in terms of effects on water quality‐ Part 2: Test methods‐ Part 2.2: Odor and taste of water‐ Subsection 2.2.3: method o
- ISIRI 7171-2-4;Water quality - Suitability of non-metallic products for use in contact with water for human consumption in terms of their effects on water quality - Part 2: Test methods - Part 2.4: Growth aquatic microorganisms test
- ISIRI 7171-2-5;Water - Suitability of non-metallic products for use in contact with water for human consumption in terms of their effects on water quality - Part 2: Test methods - Part 2.5: Substances whose extraction from water may be of concern
- ISIRI 7171-2-6;Water - Suitability of non-metallic products for use in contact with water for human consumption in terms of effects on water quality‐ Part 2: Test methods‐ Part 2.6: Extraction metals
- ISIRI 7171-3; Water Suitability of non-metallic products for use in contact with water for human consumption in terms of effects on water quality - Part 3: High temperature tests
- ISIRI 7171-4;CMS Water Suitability of non-metallic products for use in contact with water for human consumption in terms of effects on water quality - Part 4: Method for GCMS identification of water-leachable organic substances
- ISIRI 7175-1;Plastic-Polyethylene (PE) Pipes for Water Supply- Dimension Measurement - Test Method
- ISIRI 7175-2;Plastic-Polyethylene (PE) Pipes for Water Supply- Determination of Carbon Black Content- Test Method
- ISIRI 7175-3;Plastic-Polyethylene (PE) Pipes for Water Supply- Thermal Recycling Determination-Test Method
- ISIRI 7175-4;Plastic-Polyethylene (PE) Pipes for Water Supply- Evaluation of Pipes with Hydrostatic Pressure Resistance and Explosion Behavior - Test Method
- ISIRI 7175-5; Plastic-Polyethylene (PE) for Water Supply - Determination of Density of Thermoplastics and Pipes - Test Method
- ISIRI 7175-6;Plastic-Polyethylene (PE) pipes for water supply-Evaluation of carbon black distribution-Test method
- ISIRI 7175-8;Plastic-polyethylene (PE) pipes for water supply-resistance to environmental stress-cracking-Test Method
- ISIRI 7199-1;Railway ‐Railway ‐Material-Material-Part 1: Rough rolled tires for towing and following vehicle-Technical delivery conditions
- ISIRI 7199-2;Railway -Handan stock -Material - Part2 : Tires, hubs and wheels for tractor and trailing stock - Size, balancing and mounting requirements
- ISIRI 7199-3;Railway -Wagon material - Part 3 : Axles-For tractor and trailing stock- Quality requirements
- ISIRI 7199-4;Railway - Rolling stock material -Part 4: Rolled or forged wheel centers for rubber wheels for tractor and trailing stock - Quality requirements
- ISIRI 7199-8;Rail ‐Airline ‐Material-Part 8 : Monolithic wheels for tractor and trailing vehicle- Dimension and balancing requirements
- ISIRI 7199-9;Railway -Airline -Material -Part 9 : Axles for tractor and trailing stock - Dimensional requirements
- ISIRI 7202-2;Railway -Components -Technical delivery requirements - Part 2: Unalloyed carbon steel base plates
- ISIRI 7202-3;Railway -Components -Technical delivery requirements - Part 3: steel sleepers
- ISIRI 7202-4;Railway -Components -Technical delivery requirements - Part 4 : V-treated steel nuts and bolts and high strength nuts and bolts for fish plates and fastenings
- ISIRI 7206-2;Diesel engines - Fuel injection pumps and fuel injector low pressure connections - Part 2: Threadless (push-in) connections
- ISIRI 7207-1;Implants for surgery - Pacemakers - Part 1: Implantable pacemakers
- ISIRI 7207-3;Implants for surgery - Pacemakers - Part 3: Low profile connectors for implantable pacemakers [Is-1]
- ISIRI 7208-1;Textiles - Effect of dry heat on fabrics under low pressure - Part 1: Dry heat treatment of fabrics - Test method
- ISIRI 7208-2;Textiles - Effect of dry heat on fabrics under low pressure - Part 2: Determination of dimensional change in fabrics exposed to dry heat
- ISIRI 7212-1; Sockets and couplers for industrial purposes - Part 1: General requirements
- ISIRI 7212-2; Sockets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact tube accessories
- ISIRI 7212-4; Sockets and couplers for industrial purposes - Part 4: Switched sockets and locked or unlocked connectors
- ISIRI 7213-1; Self-healing type shunt power capacitors for AC systems with rated voltages up to (inclusive) 1000 V - Part 1: General - Performance, testing and rating - Safety requirements - Installation and operation guide
- ISIRI 7213-2; Shunt power capacitors of the self-healing type for AC systems with a rated voltage up to 1000 V - Part 2: Aging test, self-healing test and destruction test
- ISIRI 7216-11; Biological evaluation of medical devices – part 11: Systemic toxicity tests
- ISIRI 7216-2;Biological evaluation of medical devices – Part 2: Animal welfare requirements
- ISIRI 7216-4;Biological evaluation of medical devices Part4: Selection of tests for interaction with blood
- ISIRI 7217-1;Surgery-Implants for metallic materials – Part 1: Forged stainless steel
- ISIRI 7217-11;Implants for surgery-Metallic materials-Part 11:Forged titanium6- aluminum 7-niobium alloy
- ISIRI 7217-12; Implants for Surgical-Metallic materials - Part 12: Wrought cobalt-chromium-molybdenum alloy
- ISIRI 7217-2;Surgery-Implants for metallic materials – Part 2: Unalloyed titanium
- ISIRI 7217-3;Surgery-Implants for metallic materials-Part 3: Forged titanium 6-aluminum 4-vanadium alloy.
- ISIRI 7217-4; Implants for Surgical-Metallic materials – Part 4: Cobalt-chromium-molybdeum casting alloy
- ISIRI 7217-5; Implants for surgical-metallic materials – Part 5: Wrought cobalt-chromium-tungsten-nickel alloy
- ISIRI 7217-6; Implants for Surgical-Metallic materials - Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy
- ISIRI 7217-7;Surgery-Implants for metallic materials – Part 7: Forging Malleable and cold-formed cobalt-chromium-nickel-molybdnum-iron alloy.
- ISIRI 7217-8; Implants for surgical-metallic materials – Part 8: Wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy
- ISIRI 7217-9;Surgery-Implants for metallic materials - Part 9: Forged high nitrogen stainless steel
- ISIRI 7220-1; Geosynthetics Determination of thickness at specified pressure - Part 1: Single layer - Test method
- ISIRI 7220-2; Geotextiles Determination of thickness at specified pressure - Part 2: Procedure for determination of single layers of multiplayer products - Test method
- ISIRI 7249-1;Rubber, vulcanized or thermoplastic - Determination of tear strength-Part 1:Trousers, angle and crescent test pieces
- ISIRI 7252-1;Agricultural machinery - Equipment for harvesting-Combines and functional components-Part1: vocabulary
- ISIRI 7252-2;Agricultural machinery-Equipment for harvesting-Combines and functional components Part 2: Evaluation of properties and performance defined in the glossary
- ISIRI 7257-3;Agricultural machinery -Tractors and machinery for agriculture and forestry Technical tools to ensure safety-Part 3: Tractors
- ISIRI 7260-3-2;Electromagnetic compatibility (EMC) - Part 3-2: Limits-Limits for harmonic current emissions (Equipment input current = 16A per phase)
- ISIRI 7260-4-11;Electromagnetic compatibility (EMC) - Part 4-11: Test and measurement techniques-Voltage drops, short interruptions and voltage variations immunity tests
- ISIRI 7260-4-2; Electromagnetic compatibility (EMC) - Part 4-2: Test and measurement techniques - Electrostatic discharge immunity test
- ISIRI 7260-4-3; Electromagnetic compatibility (EMC) – Part 4-3 : Test and measurement techniques – Radiated radio-frequency, electromagnetic field immunity test
- ISIRI 7260-4-4; Electromagnetic compatibility (EMC)‐ Part 4-4: Testing and measurement techniques -Electrical rapid transient/burst immunity test
- ISIRI 7260-4-5;Electromagnetic compatibility (EMC) - Part 4-5:Test and measurement techniques - Surge immunity test
- ISIRI 7260-4-6; Electromagnetic compatibility (EMC) - Part 4-6: Test and measurement techniques - Immunity to conducted disturbances caused by radio frequency fields
- ISIRI 7260-6-3; Electromagnetic compatibility (EMC) - Part 6-3: General standards - Emissions standard for residential, commercial and light industrial environments
- ISIRI 7263-1; Diesel engines - Testing of fuel injectors - Part 1: Lever-operated test and adjustment apparatus
- ISIRI 7267-1; Radial spherical plain bearings Part 1: - Spherical plain bearings
- ISIRI 7267-2;Spherical plain bearings-Part 2:Radial spherical plain bearings with angular contact
- ISIRI 7267-3;Spherical plain bearings-Part 3 : Axial spherical plain bearings
- ISIRI 7267-4;Spherical plain bearings-Part 4 :Spherical plain bearings tie rod ends
- ISIRI 7269-1;Agricultural machinery-Sprayers-Datasheet- Part 1: Typical layout
- ISIRI 7269-2;Agricultural machinery - Sprayers - Datasheets - - Part 2:Technical - Component-related specifications
- ISIRI 7270-1;Agricultural machinery-Forage harvesters-Part 1:Vocabulary
- ISIRI 7270-2;Agricultural machinery - Forage harvesters -Part 2: Specification of features and performance
- ISIRI 7270-3;Agricultural machinery - Forage harvesters - Part 2: Test methods
- ISIRI 7271-1;Reaction to fire for building products - Test methods part1:rate of heat release from building products (cone calorimeter)
- ISIRI 7271-2;Reaction to fire for building materials and products- Test methods- Part 2: LOMBUSTIBILITY test
- ISIRI 7271-4;Reaction to fire tests for construction products-Test methodPart 4:Flammability of construction products exposed to direct flame strike (Single flame source test)
- ISIRI 7271-5; Reaction to fire test for building products - Test method Part 5: Determination of heat of combustion
- ISIRI 7271-8; Reaction to fire tests for building products - Test method Part 8: Conditioning procedures and general guidelines for substrate selection
- ISIRI 7288-1; Road vehicles - Ignition systems - Part 1: Glossary
- ISIRI 7288-2; Road vehicles - Ignition systems - Part 2: Electrical performance and function test methods
- ISIRI 7291-2; Road vehicles - Technical documentation of electrical and electronic systems - Part 2: Documentation agreement
- ISIRI 7311-1;Cigarettes - Determination of water in smoke condensates - Part 1: Gas chromatographic method
- ISIRI 7311-2; Cigarettes - Determination of Water in Smoke Condensates - Part 2: Karl fisher method
- ISIRI 7314-1;Fine - Cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Part 1: Sampling
- ISIRI 7314-2; Thin-cut tobacco and tobacco products made from it, sampling, conditioning and testing methods - Atmosphere for conditioning and testing
- ISIRI 7314-3; Fine cut tobacco and tobacco products made from tobacco - Methods of sampling, conditioning and analysis - Part 3: Determination of total particulate matter in smoking articles using a routine analytical smoking machine, preparation for wat determination
- ISIRI 7315-1;Textiles - Seam tensile properties of fabrics and ready-made textile products Part 1: Determination of maximum force seam breakage using the strip method - Test method
- ISIRI 7315-2;Textiles - Seam tensile properties of fabrics and ready-made textile products Part 2: Determination of maximum force seam breakage using the grip method - Test method
- ISIRI 7325-2;Sterile disposable intravascular catheters - Part 2: Angiographic catheters
- ISIRI 7325-3;Sterile disposable intravascular catheters - Part 3: Central venous catheters
- ISIRI 7325-4;Sterile disposable intravascular catheters - Part 2: Angiographic catheter
- ISIRI 7325-5;Sterile disposable intravascular catheters - Part 5: Peripheral catheters on the needle
- ISIRI 7326-4;Requirements and test methods of disposable medical injection extension tube
- ISIRI 7342-2; Specification for energy consumption and energy labeling of electric domestic room heaters
- ISIRI 7347-1;Tobacco and tobacco products_ Determination of water content Karl Fisher method
- ISIRI 7354-1; Surgical implants – Skeleton pins and wires Part1 : Materials and mechanical requirements
- ISIRI 7354-2;Implants for surgery – Skeleton pins and wires Part2 : Steinmann skeleton pins - Dimensions
- ISIRI 7354-3;Implants for surgery - Skeletal needles and wires Part 3: Kirschner skeletal wires
- ISIRI 7355-1;Surgical implants – Intramedullary nailing systems Part 1: Intramedullary nails with cloverleaf or V-shaped section
- ISIRI 7355-2;Surgical implants – Intramedullary nailing systems Part 2: medullary pins
- ISIRI 7368-1;Machine safety - Safety-related parts of control systems Part 1: General principles for design
- ISIRI 7385-1;Solar heating - Domestic water heating systems - Part 1: Performance rating procedures using indoor test methods
- ISIRI 7385-2; Solar heating - Domestic water heating systems - Part 2: Outdoor test methods for system performance characterization and annual performance estimation of solar only systems
- ISIRI 7385-3;Solar heating – Domestic water heating systems – Part 3: Performance test for solar plus add-on systems
- ISIRI 7385-5;Solar heating ‐ Domestic water heating systems‐ Part 5: System performance characterization through whole system testing and computer simulation
- ISIRI 7385-5;Solar heating ‐ Domestic water heating systems‐ Part 5: System performance characterization through whole system testing and computer simulation
- ISIRI 7386-1;Ergonomic design for machine safety -Part 1:Principles for determining the required dimensions for openings for whole-body access to the machine
- ISIRI 7386-2; Ergonomic design for machine safety - Part 2 : Principles for determining required dimensions for access openings
- ISIRI 7386-3; Ergonomic design for machine safety -Part 3: Anthropometric data
- ISIRI 7400-1;Plastics-Determination of color stability to heat during processing of coloring materials in plastics Part 1: General introduction
- ISIRI 7400-2;Plastics-Determination of color stability to heat during processing of coloring materials in plastics Part 2: Determination by injection molding-Test method
- ISIRI 7400-3;Plastics-Determination of color stability to heat during processing of coloring materials in plastics Part 3:Determination by oven test Test method
- ISIRI 7400-4;Plastics-Determination of color stability to heat during processing of coloring materials in plastics Part 4: Determination by two-roll milling Test method
- ISIRI 7405-1;Textiles- Microorganisms-Determination of cellulose-containing resistance to soil burial- Part 1: Evaluation of rot-retardant finish
- ISIRI 7405-2;Textile-Determination of resistance of textile containing cellulose to microorganisms-Soil burial testPart 2:Determination of long-term resistance of a rotretardant finish
- ISIRI 741-1; Meat and meat products - Determination of chloride content - Part 1: Volhard method
- ISIRI 7416-1;Wood Based panels Fiberboard - Specifications - Part 1: General requirements
- ISIRI 7416-4;Wood Based panels Fiberboard - Specifications - Part 4: Requirements for soft fiberboard
- ISIRI 7438-2; Beverage – Cider and products – Determination of patulin – Part 2: Thin layer chromatography – Test method
- ISIRI 7442-1;Measurement methods and accuracy (accuracy and precision) of results – part 1: General principles and definitions
- ISIRI 7442-2;Measurement methods and accuracy (accuracy and precision) of results – part 2: Basic method for determining the repeatability and reproducibility of a standard measurement method
- ISIRI 7446-1; Implants for Surgical-Ceramic materials - Hydroxyapatite-part 1: Ceramic hydroxyapatite
- ISIRI 7446-2;Implants for surgery-Ceramic materials-Hydroxyapatite- Part 2: Hydroxyapatite coatings
- ISIRI 7446-3;Implants for surgery -‐ Hydroxyapatite -‐ Part 3: Chemical analysis and characterization of crystallinity and phase purity
- ISIRI 7459-1; Road vehicles - High voltage connections for ignition coils and distributors - Part 1: Socket - type
- ISIRI 7459-2; Road vehicles - High voltage connectors for ignition coils and distributors, Part 2: Plug - types.
- ISIRI 7462-1; Road vehicles-Fuel injection equipment testing part 1: calibrating nozzle and holder assemblies
- ISIRI 7470-1;Moving machines ‐ Operator containment environment ‐ Part 1: Terms and definitions
- ISIRI 7470-2;Soil – mobile machinery – Operator enclosure environment – Part 2 – Air filter test
- ISIRI 7470-3; Soil - mobile machinery - Operator enclosure environment - Part 3 - Operator enclosure pressurization test method.
- ISIRI 7470-4; Soil - mobile machinery - Operator enclosure environment - Part 4 : Operator enclosure ventilation, heating and/or air conditioning test method
- ISIRI 7470-5; Ground – mobile machinery – Operator enclosure environment – Part 5 – Windshield defrosting system test method.
- ISIRI 7470-6; Soil - mobile machinery - Operator enclosure environment - Part 6 : Determining the effect of solar heating on the operator enclosure.
- ISIRI 7471-1;Moving machines – Symbols for operator controls and other displays – Part 1: Common symbols
- ISIRI 7471-2;Moving machinery - symbols for operator controls and other displays - Part 2 - special symbols for machinery equipment and accessories
- ISIRI 7477-1; Paints and varnishes - Determination of water vapor transmission rate - Part 1: Bowl method for free films
- ISIRI 7477-2; paints and varnishes - Coating materials and coating systems for exterior wall and concrete - Part 2: Determination and classification of water vapor permeability rate (permeability)
- ISIRI 7482-1;Compressed air for general use part 1 : Pollutants and quality classes
- ISIRI 7482-2; Compressed air - Part 2: Determination of oil aerosol content - Test method
- ISIRI 7482-3; Compressed air for general use‐ Part 3: Test methods for moisture measurement.
- ISIRI 7482-4;Compressed air - Part 4: Determination of solid particle content Test methods
- ISIRI 7482-5;Compressed air - Part 5: Determination of oil vapor and organic solvent content Test methods
- ISIRI 7482-6;Compressed air - Part 6: Determination of gaseous pollutant content Test methods
- ISIRI 7482‐7;Compressed air - Part 7: Determination of live microbiological contaminant content - Test method
- ISIRI 7485-1;Paints and varnishes-Determination of resistance to cyclic corrosion conditions Part 1:Wet(salt mist)/dry/moisture
- ISIRI 7485-2;Paints and varnishes-Determination of resistance to cyclic corrosion conditions-Part 2:Wet(saline fog)/dry/moisture/UV light.
- ISIRI 7486-1;paints and varnishes-Determination of resistance to filamentous corrosion-Part 1:Steel Surfaces
- ISIRI 7486-2;Determination of resistance to filamentous corrosion in paints and varnishes - Part 2: Aluminum surfaces
- ISIRI 7487-1;Paints and varnishes – Determination of volatile organic compounds (VOC) content‐ Part 1: Difference method
- ISIRI 7487-2;Paints and varnishes - Determination of volatile organic compound (VOC) content‐ Part 2: Gas chromatographic method Test method
- ISIRI 7491-1;Material requirements for elastomeric pipe joint gaskets used in water and drainage applications.
- ISIRI 7505-1; Pigments and extenders - General test methods - Part 1: comparison of colors of pigments
- ISIRI 7505-10; Pigments and extender General test methods - Part 10: Determination of density - Pycnometry method
- ISIRI 7505-13; Pigments and extenders - Determination of water-soluble sulfates, chlorides and nitrates - Test method
- ISIRI 7505-14; Pigments and extenders General test methods - Part 14 : Determination of resistivity of aqueous extract
- ISIRI 7505-18; Pigments and fillers General test methods - Part 18: Determination of residue on sieve Mechanical procedure
- ISIRI 7505-19;Pigments – Determination of water-soluble nitrates (salicylic acid method)- Test method
- ISIRI 7505-2; Pigments and extenders - General test methods - Part 2: Determination of volatile matter at 105 oC
- ISIRI 7505-21; Pigments and extenders - General test methods - Part 21 : Comparison of heat stability of pigments using baking medium
- ISIRI 7505‐22;Pigments and extenders - General test methods - part 23: Determination of density (using a centrifuge to remove entrapped air)
- ISIRI 7505‐23;Pigments and extenders - General test methods - Part 23: Determination of density (using a centrifuge to remove entrapped air)
- ISIRI 7505-24; Pigments and extenders General test methods Determination of the relative tinting power of colored pigments and the relative scattering power of white pigments - Photometric method
- ISIRI 7505-3; Pigments and extenders – Determination of water-soluble matter (Hot extraction method) – Test method
- ISIRI 7505-7;Pigments and extenders General test methods - Part 7: Determination of residue on sieve - Water method manual procedure
- ISIRI 7505-8; Pigments and extenders Determination of water-soluble matter (Cold extraction method) - Test method
- ISIRI 7505-9; Pigments and extenders - Determination of the pH of an aqueous suspensionTest method
- ISIRI 7508-1;Paints and varnishes - Rapid deformation (impact resistance) Part 1: Drop weight test, large area indentation
- ISIRI 7508-2;Paints and Varnishes‐ Rapid deformation (impact resistance) Part 2: Drop Weight test, small area indentation Test method
- ISIRI 7521-1;Tractors and self-propelled machinery for agriculture and forestry – Operator containment environment – Part 1: Vocabulary.
- ISIRI 7521-2; Tractors and self-propelled machinery for agriculture and forestry – Operator enclosure environment – Part 2: Heating, ventilation and air conditioning test method and performance.
- ISIRI 7521-3; Tractors and self-propelled machinery for agriculture and forestry - Operator enclosure environment - Part 3: Determination of the effect of solar heating.
- ISIRI 7521-4; Tractors and self-propelled machinery for agriculture and forestry – Operator containment environment – Part 4: Air cleaner element test method.
- ISIRI 7521-5; Tractors and self-propelled machinery for agriculture and forestry – Operator enclosure environment – Part 5: Pressurization system test method.
- ISIRI 7531-1; Measurement of water flow in closed channels Meters for cold portable water Part 1: Features
- ISIRI 7531-2;Measurement of water flow in closed channels for cold portable water-MetersPart 2: Installation requirements
- ISIRI 7536-1; Road vehicles – metric starter pinions – part 1: Pinions currently used
- ISIRI 7536-2; Road vehicles – metric starter pinions – part 2: 20° pressure angle pinions
- ISIRI 7537-1; Road vehicles - Multi-core patch cords - Part 1: Test methods and requirements for basic performance sheathed cable
- ISIRI 7537-2; Road vehicles – Multi-core connecting cables – Part 2: Test methods and requirements for high performance sheathed cables
- ISIRI 7537-3; Road vehicles - Multi-core connecting cables - part 3: Construction, dimensions and marking of unshielded sheathed low voltage cables
- ISIRI 7537-4; Road vehicles - Multi-core patch cords - Part 4: Articulation test method requirements for coiled cable assembly
- ISIRI 7540-1; Mining Glossary - Terminology Part 1: Planning and measuring
- ISIRI 7540-10; Mining - Terminology Chapter 10: Transport
- ISIRI 7540-11;Mining - TerminologyChapter 11:Layer control
- ISIRI 7540-2; Mining Terminology Glossary Part 2: Ventilation
- ISIRI 7540-3; Glossary of Mining Terminology Part 3: Drilling and exploration
- ISIRI 7540-4; Mining Terminology Glossary Part 4: Drainage
- ISIRI 7540-5; Mining: Terminology Chapter 5: Geology
- ISIRI 7540-6; Mining: Terminology Chapter 6: Drilling and Blasting
- ISIRI 7540-7;Mining: TerminologyChapter 7:Electrical Engineering and Lighting
- ISIRI 7540-8; Mining: Terminology Chapter 8: Earning and Working
- ISIRI 7540-9; Mining: Terminology Chapter 9: Shafts and related equipment
- ISIRI 7541-1;Aerospace – MJ threadsPart1:General requirements
- ISIRI 7541-2;Aerospace – MJ threadsPart 2:Limit dimensions for bolts and nuts
- ISIRI 7541-3;Aerospace – MJ threadsPart 3:Limit dimensions for connection for fluid systems
- ISIRI 7552-1; Road vehicles – Hydraulic braking systems – Part 1: Double flare pipes, threaded holes, male fittings and pipe seats.
- ISIRI 7554-1; Highway vehicles – Diagnostic systems – Keyword protocol 2000 – Part 1: Physical layer .
- ISIRI 7554-2; Road vehicles – Diagnostic systems – Keyword protocol 2000 – Part 2: Data link layer.
- ISIRI 7554-4; Road vehicles - Diagnostic systems - Keyword Protocol 2000 - Part 4: Requirements for emission-related systems.
- ISIRI 7555-1; Road vehicles - Digital information exchange on electrical interconnection between towing and towed vehicles - - Part 1: Physical layer and data link layer
- ISIRI 7555-2; Road vehicles - Digital exchange of information on the electrical connection between towing and towed vehicles - - Part 2: Application layer for brakes and chassis
- ISIRI 7555-3; Road vehicles - Digital information exchange on the electrical connection between towing and towed vehicles - - Part 3: Application layer for equipment other than brakes and chassis
- ISIRI 7557-1; Road vehicles - pneumatic braking systems - Part 1: Pipes with face sealing surfaces, male fittings and threaded holes
- ISIRI 7557-2; Road vehicles - pneumatic braking systems - part 2: pipes, male fittings and threaded holes with tapered sealing surfaces
- ISIRI 7562-1; Road vehicles‐ Tachograph systems Part 1: Electrical connectors
- ISIRI 7562-2; Highway - Tachograph systems - - Part 2: Recording unit and electrical interface
- ISIRI 7562-4; Road vehicles – Tachograph systems – Part 4 : CAN interface
- ISIRI 7562-5; Road - Tachograph systems - - Part 5 : Safe CAN interface
- ISIRI 7562-6; Road - Tachograph systems - Part 6 : Diagnostics
- ISIRI 7562-7; Road - Tachograph systems - Part 7: Parameters
- ISIRI 7564-6;Fire protection-Word-word-part6: Evacuation and escape routes
- ISIRI 7568-1;Cigarettes - Determination of tobacco loss from ends - Part 1: Method using rotating cylindrical cage
- ISIRI 7579-6; Rectangular connectors for frequencies below 3 MHZ. Part 6: Detail specifications for a set of rectangular connectors with size 20 (7.5A) round contacts with polarized guides – Fixed solder contact types.
- ISIRI 7580-1;Textiles - Determination of certain aromaticamines derived from azo colorants Part 1: Determination of the use of certain azo colorants accessible without extraction
- ISIRI 7580-2; Textile - Determination of certain aromaticamines from azo colorants Part 2: Determination of the use of certain azocolorants accessible by extraction of fibers
- ISIRI 7590-1; Floors - Reaction to fire tests - Part 1 : Determination of combustion behavior using a radiant heat source - Test method
- ISIRI 7591-1;Textiles - Combustion behavior of bedding - Part 1: Flammability with a smoldering cigarette - General test methods
- ISIRI 7591-2;Textiles- Burning behavior of bedding-Part 2: Flammability with a smoldering cigarette-Special test methods
- ISIRI 7591-3;Textiles - Combustion behavior of bedding -Part 3: Flammability with small open flame - General test methods
- ISIRI 7591-4;Textiles- Combustion behavior of bedding-Part 4: Flammability with small open flame-Special test methods
- ISIRI 7599-306;Electrical installations on ships -‐ Part 306: Equipment -‐ Luminaires and accessories
- ISIRI 7599‐350; Electrical installations on ships - Part 350: General construction and test methods of power control and instrumentation cables for shipboard and offshore applications
- ISIRI 7599-351; Electrical installations on ships -‐ Part 351: Insulating materials for ships and offshore units power control instrumentation telecommunications and data cables
- ISIRI 7599-352;Electrical installations on ships -‐ Part 352: Selection and installation of electrical cables
- ISIRI 7599-353;Electrical installations on ships -‐ Part 353: Extruded solid insulated single and multicore non-radial field power cables for rated voltages of 1 kV and 3 kV
- ISIRI 7599-359; Electrical installations on ships -‐ Part 359: Coating materials for power and telecommunication cables on board
- ISIRI 7599-507;Electrical installations on ships -‐ Part 507: Small ships
- ISIRI 7614-1;Soil quality - Determination of soil microbial biomass - Part 1: substrate - Induced respiration method
- ISIRI 7614-2; Soil quality - Determination of soil microbial biomass - Part 2: Fumigation - Extraction method
- ISIRI 7621-1; Rubber or plastic coated fabrics – Abrasion resistance Part 1: Taber abrasive
- ISIRI 7626-3;Pallet - Pallet joints - Test methodPart 3: Determination of strength
- ISIRI 763-1;Tire sizes for motorcycles
- ISIRI 7631-1; Microbiology of sterilization of medical devices – Part 1: Determination of microorganism population in products
- ISIRI 7631-2;Sterilization of medical devices – Microbiological methods of medical devices Part 2: Sterility testing in validation of a sterilization process
- ISIRI 7637-1; Road vehicles - fuse links - Part 1: Definitions and general test requirements
- ISIRI 7637-2; Road vehicles – Insurance links – Part 2: User guide
- ISIRI 7637-3; Road vehicles - Fuse - connections - Part 3: Fuse - tab connections (blade type)
- ISIRI 7637-4; Road vehicles - fuse links - Part 4: Female contact (type A) and bolted contact (type B) fuse links and their test fixtures
- ISIRI 7641-1; Road vehicles ‐ Four-pole electrical connectors with pin and twist lock‐ Part 1: Dimensions and application classes
- ISIRI 7641-2; Road vehicles ‐ Four-pole electrical connectors with pin and twist lock‐ Part 2: Tests and requirements
- ISIRI 7643-1; Statistical interpretation of data-Part 1: Statistical presentation of data
- ISIRI 7644-1;LAMP CONTROLLER Part1:General and safety requirements
- ISIRI 7644-2-1;LAMP CONTROLLER - Part2-1:Special requirements for Routing Devices (except smart starter)
- ISIRI 7644-2-10;Lamp control assembly - Part 2-10 : Special requirements for electronic inverters and converters for high frequency operation of cold start tube discharge lamps (neon tubes)
- ISIRI 7644-2-8;Lampcontrolgear - Part 2-8 : Special requirements for fluorescent lamps with ballast
- ISIRI 7644-2-9;Lamp control assembly - Part 2-9 : Special requirements for lamps with ballast (except fluorescent lamps)
- ISIRI 7645-1; Rubber - or plastic - coated fabrics Determination of URulo properties - Test methods Part 1: Methods for determination of length, width and net mass
- ISIRI 7645-2; Rubber - or plastic - coated fabrics - Determination of roll properties - Test methods Part 2: Mass per unit area of coated fabrics, coating and substrate
- ISIRI 7645-3; Rubber or plastic coated fabrics Determination of roll properties Test methods - Part 3: Determination of thickness
- ISIRI 7652-2; Laboratory glassware - General purpose Density hydrometers Part 2: Test methods and use
- ISIRI 7655-1;Glass and glassware - Analysis of Extract Solutions - Part 1: Determination of silicon dioxide by molecular absorption spectrometry
- ISIRI 7655-2;Glass and glassware - Analysis of extract solutions Part 2: Determination of sodium oxide and potassium oxide by flame spectrometric methods
- ISIRI 7655-3;Glass and glassware - Analysis of extract solutions - Part 3: Determination of calcium oxide and magnesium oxide by flame atomic absorption spectrometry
- ISIRI 7655-4;Glass and glassware - Analysis of extract solutions-Part 4:Determination of aluminum oxide by molecular absorption spectrometry
- ISIRI 7655-5;Glass and glassware - Analysis of extract solutions-Part 5:Determination of iron (???) oxide by molecular absorption spectrometry and flame atomic absorption spectrometry
- ISIRI 7655-6;Glass and glassware - Analysis of extract solutions-Part 6:Determination of boron(???)oxide by molecular absorption spectrometry
- ISIRI 7662-1; Compressors and vacuum pumps - Safety requirements Part 1: Compressors
- ISIRI 7662-2; Compressors and vacuum pumps - Safety requirements Part 2: Vacuum pumps
- ISIRI 7663-1; Textiles - professional care, dry cleaning and wet cleaning of fabrics and clothing - Part 1: Evaluation of performance after cleaning and finishing
- ISIRI 7663-2;Textiles - Professional care dry cleaning and wet cleaning of fabrics and clothing - - Part 2: Procedure for testing performance during cleaning and finishing using tetrachloroethene Test method
- ISIRI 7663-3; Textiles Professional care, dry cleaning and wet cleaning of fabrics and garments Part 3: Procedure for testing performance during cleaning and finishing using hydrocarbon solvents Test method
- ISIRI 7663-4;Textiles – Professional care dry cleaning and wet cleaning of fabrics and clothing – – Part 4: Procedure for testing performance during cleaning and finishing using simulated wet cleaning – Test method
- ISIRI 7691-1; Road vehicles - Vehicle test methods for electrical disturbances due to narrowband radiated electromagnetic energy Part 1: General and definitions
- ISIRI 7691-2; Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Non-vehicle radiation sources
- ISIRI 7691-3; Road vehicles-Vehicle test methods for electrical disturbances by narrowband radiated electromagnetic energy Part 3: Embedded transmitter simulation
- ISIRI 7691-4; Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - - Part 4: Bulk current injection
- ISIRI 7696-3; Fire resistance tests – Fire dampers for air distribution systems – part 3: Guidance on test method
- ISIRI 7698-2; Road vehicles - Coiled tubing assemblies for air brake connection between towing and towed vehicles - Part 2: Performance requirements
- ISIRI 770-3; Disposable sterile hypodermic syringes – Part 3: Auto disable syringes for fixed dose immunization
- ISIRI 7724-2;Water quality‐ Detection and enumeration of intestinal enterococci Part 2: membrane filtration method
- ISIRI 7725-1;Water quality‐ Detection and enumeration of Escherichia coli and coliform bacteria Part 1: Membrane filtration method
- ISIRI 7738-1; Low frequency cables with polyolefin insulation and polyolefin sheath with moisture barrier Part 1: General design details and requirements
- ISIRI 7739-2; Paints and Varnishes – Colorimetry Part 2: Color measurement – Reflecting or transmitting objects
- ISIRI 7744-1; Geotextile and geotextile - related products - Strength of internal structural connections - Test method - Part 1: Geocells
- ISIRI 7745-1;Fishing nets – Determination of eye size – Test method Part 1: Opening the net
- ISIRI 7745-2;Fishing nets – Determination of eye size – Test method Part 2: Net length
- ISIRI 7755-1; Explosion protection systems Part 1: Determination of explosion indexes of combustible dusts in the air
- ISIRI 7755-2; Explosion protection systems Part 2: Determination of explosion indexes of flammable gases in air
- ISIRI 7755-3; Explosion protection systems Part 3 : Determination of explosion indices of fuel/air mixtures other than dust/air and gas/air mixtures
- ISIRI 7755-4; Explosion protection systems Part 4: Determining the effectiveness of explosion suppression systems
- ISIRI 7769-1;Gearboxes-Acceptance code for Gearboxes-Part 1: Test code for airborne sound
- ISIRI 7769-2; Gearboxes - Acceptance code for gear units - Part 2 : Determination of mechanical vibrations
- ISIRI 7772-1;Fruit and vegetable products - Determination of formic acid content Part 1: gravimetric method
- ISIRI 7772-2;Fruit and vegetable products - Determination of formic acid content Part 1: Routine method
- ISIRI 7781-1; Roller pens and refills Part 1: General use - Specification and test method
- ISIRI 7786-1;Glass Viscosity and viscometric fixed points‐ Part 1: Principles for determining viscosity and viscometric fixed points
- ISIRI 7786-2;Glass- Viscosity and viscometric fixed points Part 2: Determination of viscosity with rotary viscometers
- ISIRI 7786-3;Glass Viscosity and viscometric fixed points‐ Part 3: Determination of viscosity by fiber elongation viscometer
- ISIRI 7786-4;Glass- Viscosity and viscometric fixed points Part 4: Determination of viscosity by beam bending
- ISIRI 7786-5;Glass- Viscosity and viscosimetric fixed points
- ISIRI 7786-6;Glass‐ Viscosity and viscometric fixed points Chapter 6:Determination of softening point
- ISIRI 7786-7;Glass – Viscosity and viscosimetric fixed points Chapter 7: Determination of annealing point and strain point by beam bending
- ISIRI 7786-8; Glass‐ Viscosity and viscosimetric fixed points Part 8: Determination of (dilatometric) transformation temperature
- ISIRI 7787-1;Optics and optical instruments - Microscopes Part 1: Immersion oil for general use in light microscopy
- ISIRI 7806-1;Agricultural machinery -Equipment for fertilizer distribution -Part 1: Full-width fertilizer spreaders -Test methods
- ISIRI 7806-2;Agricultural machinery- Equipment for fertilizer distribution-Part 2: Fertilizer dispensers in lines-Test methods
- ISIRI 7808-1;Clinical thermometers - Part 1: Liquid thermometers in metallic glass with maximum instrumentation
- ISIRI 7809-1;Metallic material hardness test Brinell hardness testPart 1: Test method
- ISIRI 7809-2; Metallic materials hardness test – Brinell hardness test Part 2: Verification and calibration of Test Machines
- ISIRI 7809-3;Metallic material hardness test- Vickers method- Part3:Calibration of reference blocks
- ISIRI 7810-1;Metallic materials Vickers hardness test - Part 1: Test method
- ISIRI 7810-2;Vickers hardness test of metallic materials - Part 2:Verification and calibration of testing machines
- ISIRI 7810-3;Metallic materials – Vickers hardness test – - Part3: Calibration of reference blocks
- ISIRI 7810-4;Metallic materials – Vickers hardness test –‐ Part 4: Hardness values tables
- ISIRI 7811-1;Metallic material hardness testRockwell hardness testPart 1:Test method(A, B, C, D, E, F, G, H, K, N, T scales)
- ISIRI 7811-2;Metallic material hardness test-Rockwell hardness testPart 2: Verification and calibration of testing machines(Scales: A, B, C, D, E, F, G, H, K, N, T)
- ISIRI 7812-6; Aviation – List of equivalent terms-Chapter 6: Standard atmosphere
- ISIRI 7812-8;Aviation –List of equivalent terms-Chapter 8:Aircraft reliability
- ISIRI 7817-2; Centrifugal, mixed flow and axial pumps - Method and energy labeling instructions for measuring energy consumption
- ISIRI 7829-1; Filling station for compressed natural gas (CNG) - Part 1: General requirements
- ISIRI 7829-2; Filling station for compressed natural gas (CNG) - Part 2: Compressor equipment
- ISIRI 7838-1; Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 1: Connectors for braking systems and chassis parts of vehicles with a rated supply voltage of 24 V
- ISIRI 7838-2; Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 2: Connectors for braking systems and chassis parts of vehicles with a nominal supply voltage of 12 V
- ISIRI 7871-1;Industrial wheels - Dimensions of top plates - Part 1: Rectangular top plates with 4 bolt holes
- ISIRI 7876-1;Paints and varnishes - Determination of resistance to moisture - Part 1: Continuous condensation
- ISIRI 7876-2;Paints and varnishes - Determination of resistance to moisture - Part 2: Intermittent condensation
- ISIRI 7877-1; Paints and varnishes ‐ Evaluation of deterioration of coatings ‐ Determination of the amount and extent of defects and intensity of uniform changes in appearance -‐ Part 1: General introduction and naming system
- ISIRI 7877-10; Paints and varnishes -‐ Evaluation of deterioration of coatings -‐ Determination of the amount and extent of defects and intensity of uniform changes in appearance -‐ Part 10: Evaluation of filiform corrosion degree
- ISIRI 7877-2; Paints and varnishes -‐ Evaluation of deterioration of coatings -‐ Determination of the amount and extent of defects and the intensity of uniform changes in appearance -‐ Part 2: Evaluation of the degree of blistering
- ISIRI 7877-3; Paints and varnishes ‐ Assessment of deterioration of coatings ‐ Determination of the amount and extent of defects and intensity of uniform changes in appearance ‐ Part 3: Assessment of degree of corrosion
- ISIRI 7877-4;Paints and varnishes -‐ Evaluation of deterioration of coatings -‐ Determination of the amount and extent of defects and intensity of uniform changes in appearance -‐ Part 4: Evaluation of degree of cracking
- ISIRI 7877-5;Paints and varnishes -‐ Evaluation of deterioration of coatings -‐ Determination of the amount and extent of defects and intensity of uniform changes in appearance -‐ Part 5: Evaluation of degree of flaking
- ISIRI 7877-6; Paints and varnishes -‐ Evaluation of deterioration of coatings -‐ Determination of the amount and extent of defects and the intensity of uniform changes in appearance -‐ Part 6: Evaluation of degree of chalking Tape method
- ISIRI 7877-7;Paints and varnishes -‐ Evaluation of deterioration of coatings -‐ Determination of the amount and extent of defects and the intensity of uniform changes in appearance -‐ Part 7: Evaluation of the degree of chalking by the Velvet method
- ISIRI 7877-8; Paints and varnishes - - Evaluation of deterioration of coatings - - Determination of the amount and size of defects and the intensity of uniform changes in appearance - - Part 8: Evaluation of degree of delamination and corrosion around a plotter
- ISIRI 7909-1; Gas cylinder - Refillable seamless steel gas cylinder - Design, construction and testing Part l: Quenched and tempered steel cylinders with tensile strength less than 1100 Mpa Specification and test methods
- ISIRI 7909-2; Gas cylinder - Refillable seamless steel gas cylinder - Design, construction and testing Part 2: Quenched and tempered steel cylinders with tensile strength greater than 1100 Mpa - Specification and test method
- ISIRI 7909-3; Gas cylinder - Refillable seamless steel gas cylinder -Design, construction and testing Part 3: Normalized steel cylinders - Specification and test methods
- ISIRI 7917-1;Water quality – Digestion for determination of selected elements in water
- ISIRI 7917-2; Water quality digestion for determination of selected elements in water -Part 2: Nitric acid digestion
- ISIRI 7928-2;Steel – Determination of calcium content by flam atomic absorption spectrometry Part 2:Determination of total calcium content
- ISIRI 7946-1;Textile machinery and accessories Rings and travelers for ring spinning and ring folding frames -Part 1: T-rings and their suitable travelers
- ISIRI 7946-2; Textile machinery and accessories Rings and travelers for ring spinning and ring folding frames ‐Part 2: HZCH- HZ- and J- rings and their suitable travelers
- ISIRI 7983-1; Bicycle tires and wheels - Part 1: Type designations and dimensions
- ISIRI 8000-1; Thermostatic switches primarily for use in telecommunications equipment and electronic applications using similar techniques Part 1: General requirements and measurement methods
- ISIRI 8006-1;Packing sacks Drop test Paper sacks
- ISIRI 8035-1;Microbiology of food and animal feeds Horizontal method for the detection and enumeration of Listeria monocytogenes - Part 1:Detection method
- ISIRI 8035-2;Microbiology of food and animal feeds Horizontal method for detection and enumeration of Listeria monocytogenes - Part 2:Counting method
- ISIRI 8042-1;Desiccants- Part 1: Sample preparation and storage of test specimens- Test method
- ISIRI 8042-10; Dryers - Part 10: Determination of bulk density (dry base) Test method
- ISIRI 8042-11; Dryers - Part 11: Determination of brittleness and dust content - Test method
- ISIRI 8042-2; Dryers Part 2: Determination of moisture content Test method
- ISIRI 8042-3;DesiccantsPart 3: Determination of the pH-Test method
- ISIRI 8042-4; Dryers - Part 4: Determination of water-soluble chloride contentTest method
- ISIRI 8042-5;Desiccants- Part 5: Determination of water-soluble sulfate content Test method
- ISIRI 8042-6; Dryers Chapter 6: Determination of adsorption capacity-Test method
- ISIRI 8042-7;Desiccants- Part 7: Determination of particle size Test method
- ISIRI 8042-8;Desiccants Part 8: Determination of the content of ammonia and ammonium compounds - Test method
- ISIRI 8042-9; Dryers Part 9: Determination of cobalt chloride content - Test method
- ISIRI 8043-2;Dental rotary instruments - Diamond instruments -Part 2: Discs
- ISIRI 8043-3; Dental rotary instruments-Diamond instruments-Part 3: Particle sizes, representation and color code
- ISIRI 8044-2; Dental rotary instruments Handles Part 2: Handles made of plastic
- ISIRI 8047-10; Farm tractors - Test procedures Part 10: Hydraulic power at tractor/equipment interface
- ISIRI 8047-11;Agricultural tractors - Test procedures Part 11: Steering capability of wheeled tractors
- ISIRI 8047-4; Farm tractors - Test procedures Part 4 : Measuring exhaust fumes
- ISIRI 8047-7;Agricultural tractors -Test procedures -Part 7: Determination of axle power
- ISIRI 8047-9;Agricultural tractors - Test procedures Part 9 : Power tests for drawbar
- ISIRI 8054-1;Metallic powders - Determination of oxygen content by reduction methods - Part 1: General rules
- ISIRI 8054-2;Metallic powders-Determination of oxygen content by reduction methods Part2: Mass loss in hydrogen reduction (Hydrogen loss)
- ISIRI 8054-3;Metallic powders-Determination of oxygen content by reduction methodsPart3: Hydrogen-reducible oxygen
- ISIRI 8054-4;Metallic powders-Determination of oxygen content by reduction methods- Part 4: Total oxygen by reduction-subtraction
- ISIRI 8055-1;Determination of optical coefficient of strain for glass Part 1: Tensile test
- ISIRI 8055-2;Glass – Determination of stress – optical coefficient‐ Part 2: Bending test
- ISIRI 8057-10; Graphic symbols for diagrams - Par 10: Fluid power converters
- ISIRI 8057-11; Graphic symbols for diagrams - Chapter 11: Devices for heat transfer and heat engines
- ISIRI 8057-5; Graphic symbols for diagrams - Part 5: Measuring and control devices
- ISIRI 8057-7; Graphic symbols for diagrams - Part 7: Basic mechanical components
- ISIRI 8057-9; Graphic symbols for diagrams - Chapter 9: Pumps, compressors and fans
- ISIRI 8058-4; Information technology-Open Document Architecture (ODA) and Exchange Format: Document Profile
- ISIRI 8070-1; Contact lenses Determination of rear peak power - Part 1: Method using a manual focus focus meter
- ISIRI 8100‐2;Technical product documentation - Letters Part 2: Latin alphabet, numbers and anthem
- ISIRI 8103-2;Steel for reinforcement and prestressing of concrete -Test methods - Part 2: Welded fabric
- ISIRI 8103-3;Steel for reinforcement and prestressing of concrete - Test methods - Part 3: Prestress steel
- ISIRI 8115-3-1;Resin-based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Page1:Unfilled epoxy resin compounds
- ISIRI 8115-3-2;Resin-based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Page 2: Quarts filled epoxy resin compounds
- ISIRI 8115-3-3;Resin-based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Page 3: Unfilled polyurethane compounds
- ISIRI 8115-3-4;Resin-based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Page 4: Filled polyurethane compounds
- ISIRI 8117-10; Additives for concrete, mortar and mortar - Part 10: Determination of water-soluble chloride content - Test method
- ISIRI 8117-2;Additives for concrete, mortar and mortar - Part 2: Determination of setting time - Test method
- ISIRI 8117-4; Additives for concrete, mortar and mortar - Part 4: Determination of air evacuation of concrete - Test method
- ISIRI 8117-5;Additives for concrete, mortar and mortar -‐ Part 5: Determination of capillary absorption -‐ Test method
- ISIRI 8117-6;Additives for concrete, mortar and mortar - Part 6: Infrared analysis - Test method
- ISIRI 8117-8; Additives for concrete, mortar and mortar - Part 8: Determination of conventional dry material content - Test method
- ISIRI 8148-2;Determination of Mar resistance in paints and varnishes - Part 2: Method using a pointed pen
- ISIRI 8153-2; Compressors, pneumatic tools and machines -Words - Part2: Compressors
- ISIRI 8164-1; Cereals – Determination of mass per hectoliter Part 1: Reference method
- ISIRI 8167-1;Information technology - 130 mm optical disc cartridge, write once for information exchange - Part 1: Unregistered optical disc cartridge
- ISIRI 8167-2; Information technology - 130 mm optical disc cartridge, write once for information exchange - Part 2 : Recording format
- ISIRI 8168-1; Information technology - Keyboard layouts for text and office systems - Part 1: General principles governing keyboard layouts
- ISIRI 8168-2;Information technology - Keyboard layouts for text and office systems - Part 2: Alphanumeric part
- ISIRI 8168-3;Information technology - Keyboard layouts for text and office systems - Part 3: Complementary layouts of the alphanumeric region of the alphanumeric section
- ISIRI 8168-4;Information technology - Keyboard layouts for text and office systems - Part 4: Numeric part
- ISIRI 8168-5;Information technology - Keyboard layouts for text and office systems - Part 5: Print section
- ISIRI 8168-6; Information technology - Keyboard layouts for text and office systems - Part 6 : Function part
- ISIRI 8168-7; Information technology – Keyboard layouts for text and office systems – Chapter 7 : Symbols used to represent functions
- ISIRI 8168-8; Information technology – Keyboard layouts for text and office systems –‐ Part 8 : Allocation of keys of the numeric keypad
- ISIRI 8171-1; Information technology – Binding and file structure of write-once and rewritable media that uses non-sequential record for information exchange Part 1: General
- ISIRI 8171-2; Information technology – Volume and file structure of write-once and rewritable media using non-sequential register for information exchange Part 2: Volume and boot block recognition
- ISIRI 8171-3;Information technology – Volume and file structure of write-once and rewritable media using non-sequential record for information exchange Chapter 3: Volume structure
- ISIRI 8171-4;Information technology – Volume and file structure of write-once and rewritable media using non-sequential record for information exchange Chapter 4 : File structure
- ISIRI 8171-5; Information technology – Volume and file structure of write-once and rewritable media using non-sequential record for information exchange Chapter 5 : Record structure
- ISIRI 8172-1;Industrial automation systems and integration of industrial data for exchange, access and sharing - Part 1: Architecture overview and explanation
- ISIRI 8172-2;Industrial automation systems and integration Integration for industrial data exchange, access and sharing – Part 2: Integration and mapping methodology
- ISIRI 8186-1; Recycled pulps - Estimation of adhesives and plastics Part 1: Visual method
- ISIRI 8186-2;Recycled pulps – Estimation of adhesives and plastics Part 2: Image analysis method
- ISIRI 8189-1;Textile machinery and accessories Yarn and intermediate product packages - Part 1:Terminology
- ISIRI 8189-2; Textile machinery and accessories Yarn packages and intermediate products - Part 2: Winding forms
- ISIRI 8192-1;Textile machinery and accessories - Machine parts in contact with textile processing oils - Part 1: Determination of anticorrosive effect on steel - Test method
- ISIRI 8199-1; Test screening - Part 1 Methods using test sieves of woven wire cloth and perforated metal plate
- ISIRI 8201-1; Display of Particle Size Analysis results - Part 1: Graphical representation
- ISIRI 8201-4; Display of particle size analysis results - Part 4: Characterization of a classification process
- ISIRI 8209-1;Aviation fluid systems -‐ O-rings, inch series: Inside diameters and cross-sections, tolerances and size identification codes -‐ Part 1: Close tolerances for hydraulic systems
- ISIRI 8209-2;Aviation fluid systems -‐ O-rings, inch series: Inside diameters and cross-sections, tolerances and dimension designation codes -‐ Part 2: Standard tolerances for non-hydraulic systems
- ISIRI 8210-2; Aerospace systems - Program management - Part 2: Product assurance
- ISIRI 8225-2; Passenger cars - Test track for violent lane-changing maneuver Part 2 : Obstacle avoidance
- ISIRI 8231-1; Identity cards – Issuer IDs Part 1: Numbering system
- ISIRI 8231-2; Identity cards - Issuer IDs - Part 2: Application and registration procedures
- ISIRI 8232-1; Identification cards -‐ Integrated circuit(s) cards with contacts -‐ Part 1: Physical properties
- ISIRI 8232-2; Identification cards -‐ Integrated circuit(s) cards with contacts -‐ Part 2: Cards with contacts -‐ Dimensions and location of contacts
- ISIRI 8232-5; ID cards - Integrated circuit(s) cards with contacts - Part 5: Registration of application providers
- ISIRI 8232-7; ID cards - Integrated circuit(s) cards with contacts - Part 7: Cross-industry commands for Structured Card Query Language (SCQL)
- ISIRI 8235-1;Textile floor coverings-Laboratory contamination tests-Part 1: kappasoil test
- ISIRI 8235-2; Textile floor coverings-Laboratory contamination tests-Part 2: Barrel test
- ISIRI 8262-1; Pesticides – Determination of pesticides and polychlorinated biphenyls (PCBs) in fatty foods Part 1: General
- ISIRI 8262-2; Pesticides – Identification of pesticides and polychlorinated biphenyls (PCBs) in fatty foods. Part 2: Extraction of oil, pesticides and PCBs and determination of oil content
- ISIRI 8262-3; Determination of pesticides and polychlorinated biphenyls (PCBs) in fatty foods. Part 3: Cleaning methods
- ISIRI 8262-4; Pesticides – Identification of pesticides and polychlorinated biphenyls (PCBs) in fatty foods. Part 4: Determination, Confirmatory testing and miscellaneous
- ISIRI 8264-1; Powertrack systems – Part 1: General requirements
- ISIRI 8273-2;Paper and cardboard - Determination of tensile properties Part 2:Constant elongation rate - Test method
- ISIRI 8279-1;Laboratory glassware - BottlesPart 1: Screw neck bottles
- ISIRI 8279-2;Laboratory glassware - BottlesPart 2: Conical neck bottles
- ISIRI 8279-3;Laboratory glassware - BottlesPart 3: Aspirator bottles
- ISIRI 8294-1;Aviation - Aircraft - Connectors for ground electrical sources Part 1: Design, performance and testing requirements
- ISIRI 8300-1;Flexible insulation jacket – Part 1: Definitions and general requirements
- ISIRI 8300-2;Flexible insulation jacket - Part 2 : Test methods
- ISIRI 8300-3-100;Flexible insulated tubingPart 3 : Specifications for individual sleeving sheet types 100 : Extruded PVC tubing
- ISIRI 8300-3‐116;Flexible insulated sleeving – – Part 3 : Specification for individual tubing types – Pages 116 and 117: Extruded polychloroprene – General purpose
- ISIRI 8300-3‐121;Flexible insulated tubing -Part 3: Specifications for individual tubing types -Pages 121 to 124:Extruded silicone tubing
- ISIRI 8300-3‐136;Flexible insulated tubing – – Part 3: Specifications for individual tubing types – Page 136: Extruded fluorosilicone tubing – General purpose
- ISIRI 8300-3-151; Flexible insulated tubing –‐ Part 3 : Specifications for individual tubing types – Page 151: Extruded PVC/nitrile rubber – General purpose
- ISIRI 8300-3-165;Flexible insulation tubing – - Part 3 : Specifications for individual tubing types – Page 165 : Extruded polyolefin flame retardant limited fire hazard tubing
- ISIRI 8300-3-209;Flexible insulated tubing - Part 3: Specifications for individual tubing types - Page 209 : Heat shrinkable polyolefin tubing general purpose, flame retardant, shrinkage ratio 2 :1
- ISIRI 8300-3-211;Flexible insulated tubing ‐Part 3: Specifications for individual tubing types ‐Page 211 : Heat shrink tubing, semi-rigid polyolefin, shrinkage ratio 2 :1
- ISIRI 8300-3‐212;Flexible insulated tubing – – Part 3: Specifications for individual tubing types – Page 212:Heat shrinkable polyolefin tubing
- ISIRI 8300-3-214;Flexible insulated tubing – - Part 3: Specifications for individual tubing types – Page 214: Heat shrinkable polyolefin tubing non-flame retardant shrinkage ratio 3:1 with thick and medium wall
- ISIRI 8300-3-216;Flexible insulated sleeving – – Part 3: Specification for individual tubing types – Page 216:Heat shrinkable flame retardant limited fire hazard tubing
- ISIRI 8300-3-228;Flexible insulated tubing – Part 3: Specifications for individual tubing types – Page 228 : Heat shrinkable, semi-rigid polyvinylidene fluoride tubing, flame retardant, liquid resistant, shrinkage ratio 2:1
- ISIRI 8300-3-233;Flexible insulated tubing – - Part 3: Specifications for individual tubing types – Page 233 : Heat shrinkable fluoroelastomer tubing flame retardant liquid resistant shrinkage rate
- ISIRI 8300-3‐240;Flexible insulated tubing –Part 3: Specifications for individual tubing types – Pages 240 to 243: Heat shrinkable PTFE tubing
- ISIRI 8300-3-271;Flexible insulated tubing –‐ Part 3: Specifications for individual tubing types – Page 271: Heat shrink elastomer tubing flame retardant liquid resistant shrinkage ratio
- ISIRI 8300-3-340;Flexible insulated tubing –Part 3: Specifications for individual tubing types – Pages 340 to 342: Expandable braided polyethylene terephthalate textile tubing
- ISIRI 8300-3-343;Flexible insulated tubing –Part 3: Specifications for individual tubing types – Pages 343 to 345: Expandable braided ethylene chlorotrifluoroethylene(E-CTFE) textile tubing, uncoated
- ISIRI 8300-3‑400;Flexible insulated tubing –Part 3: Specifications for individual tubing types – Plates 400 to 402: Glass textile tubing with silicone elastomer coating
- ISIRI 8300-3-403;Flexible insulated tubing –Part 3: Specifications for individual tubing types – Pages 403 to 405: Acrylic-based coated glass textile tubing
- ISIRI 8300-3-406;Flexible insulated tubing – Part 3: Specifications for individual tubing types – Pages 406 - 408: PVC coated glass textile tubing
- ISIRI 8300-3‐420;Flexible insulated tubing –Part 3: Specifications for individual tubing types – Pages 420 to 422: Polyethylene terephthalate textile tubing with acrylic-based coating
- ISIRI 8302-1;Steel – Conversion of elongation values–Part 1: Carbon and low alloy steels
- ISIRI 8302-2;Steel – Conversion of elongation values –Part 2: Austenitic steels
- ISIRI 8307-1;Agricultural machinery – Crop protection equipment Air-assisted agricultural sprayers – Datasheets – Part 1: Typical layout
- ISIRI 8307-2; Agricultural machinery - Air-assisted agricultural sprayers - Data sheets Part 2: Technical - Component specifications
- ISIRI 8312-1;Specifications of electric infrared transmitters for industrial heating Part 1: Shortwave infrared emitters
- ISIRI 8328-1; Road vehicles - Airbag components - Part 1: Glossary
- ISIRI 8328-2; Road vehicles – Airbag components‐ Part 2: Testing airbag modules
- ISIRI 8328-3; Road vehicles - Airbag components‐ Part 3: Testing inflation devices
- ISIRI 8330-1; Road vehicles - Lashing and securing arrangements on vehicles for maritime transport on Ro/Ro ships‐ General requirements Part 1: Commercial vehicles and vehicle combinations, excluding semi-trailers
- ISIRI 834-1;Equal span combination wrench
- ISIRI 8357-1;Infusion equipment for medical use - Part 1: Glass vials with infusion cores
- ISIRI 8357-2;Petroleum and related products –Determination of corrosion resistance of refractory hydraulic fluids –Part 2: Non-aqueous fluids – Test method
- ISIRI 8357-3;Infusion equipment for medical use –Part 3: Aluminum caps for infusion bottles
- ISIRI 8357-4;Infusion equipment for medical use - Part 4:Infusion sets for disposable gravity feed - Specifications and test methods
- ISIRI 8357-6;Infusion equipment for medical use -Part 6: Freeze Drying caps for infusion bottles
- ISIRI 8357-7; Infusion equipment for medical use - part 7: plastic combinations for infusion bottles
- ISIRI 8358-1; Surgical implants – Metal intramedullary nailing systems – Part 1: Intramedullary nails
- ISIRI 8358-2; Surgical implants – Metal intramedullary nailing systems – Part 2: Locking components
- ISIRI 8358-3; Surgical implants – Metal intramedullary nailing systems – Part 3: Attachment devices and reamer diameter measurements
- ISIRI 8359-1;Retrieval and analysis of surgical implants – Part 1: Retrieval and use.
- ISIRI 8363-1; Magnetic tape sound recording and reproduction systems Part 1: General terms and requirements
- ISIRI 8363-10; Magnetic tape sound recording and reproduction systems -‐ Part 10: Time and address codes
- ISIRI 8363-11;Magnetic tape sound recording and reproduction systems -‐ Part 11: Address code for compact cassettes
- ISIRI 8363-2; Magnetic tape sound recording and reproduction systems-Part 2: Calibration Tapes
- ISIRI 8363-3;Magnetic tape sound recording and reproduction systems - Part 3:Methods for measuring the properties of sound recording and reproduction equipment on magnetic tape
- ISIRI 8363-4; Magnetic tape sound recording and reproduction systems
- ISIRI 8363-5; Magnetic tape audio recording and reproduction systems -‐ Part 5: Electric magnetic tape properties
- ISIRI 8363-6; Magnetic tape audio recording and reproduction systems - Part 6: Reel-to-reel system
- ISIRI 8363-7; Magnetic tape audio recording and reproduction systems - Part 7: Commercial tape recordings and cassette for home use
- ISIRI 8370-1;Agricultural wheeled tractors Front mounted equipment-Part 1: PTO and three-point linkage
- ISIRI 8370-2;Agricultural wheeled tractors-Front mounted implement, part 2:Fixed implement attachment
- ISIRI 8372-1;Textile machinery and accessories- Winding beams-Part 1 : General dictionary
- ISIRI 8372-2;Textile machinery and accessories-Beams for wrapping-Part 2:Warp beams
- ISIRI 8372-3;Textile machinery and accessories- Beams for winding-Part 3 : Weaver, beams
- ISIRI 8372-4; Textile machinery and accessories - Beams for wrapping Part 4: Quality classification of flanges for weaver, beams, warper, beams and section beams
- ISIRI 8372-5; Textile machines and accessories - Beams for winding - Part 5 : Section beams for warp knitting machines
- ISIRI 8372-6; Textile machinery and accessories - Beams for wrapping - Part 6 : Beams for tape weaving and tape knitting
- ISIRI 8372-7;Textile-Textile machines and accessories-Beams for winding-Part 7:Beams for dyeing silver, roving and yarn
- ISIRI 8372-8; Textile machinery and accessories - Winding beams - Part 8: Definitions and measurement methods of release tolerances
- ISIRI 8373-1;Textile machinery and accessories- Cones for cross-winding- Part 1: Recommended main size
- ISIRI 8373-2;Textile machinery and accessories Cones for cross-winding - Part 2: Dimensional tolerances and illustration of 3° and half-angle cones
- ISIRI 8373-3;Textile machinery and accessories- Cones for cross-winding- Part 3: Dimensions, tolerances and illustration of half-angle cones 4 20
- ISIRI 8373-4;Textile machinery and accessories- Cones for cross-winding- Part 4: Dimensions, tolerances and definition of half-angle cones 4? For 20 dyeing windings
- ISIRI 8373-5;Textile machinery and accessories Cones for cross-winding - Part 5: Dimensional tolerances and representation of 5° and half angle cones
- ISIRI 8376-2;Technical drawings - Simplified illustration of assembly of fasteners and parts - Part 2: Rivets for aerospace equipment
- ISIRI 8389-1;Butter Moisture determination of fat-free solids and fat content‐ Part 1: Determination of moisture content (Reference method
- ISIRI 8389-2;Determination of moisture, non-solid and fat content of butter – part 2: Determination of solid content without fat (Reference method)
- ISIRI 8389-3; Moisture determination of fat-free solids and fat content of butter Part 3: Calculation of fat content
- ISIRI 8393-1;Water quality – Determination of biochemical oxygen demand after one day (BODn)Part 1: Dilution and seeding method with the addition of alithiourea – Test method
- ISIRI 8396-1;Water quality – Determination of biochemical oxygen demand after one day (BODn)Part 1: Dilution and seeding method with addition of allallythiourea – Test method
- ISIRI 8396-2;Water quality – determination of biochemical oxygen demand after n days (BODn)‐ Part 2: Method for undiluted samples
- ISIRI 8406-2; Seeding equipment - Test methods - Part 2: Seeders for row sowing
- ISIRI 8409-1;Nomenclature systems for steels‐ Part 1: steel names and basic symbols
- ISIRI 8409-2;Nomenclature systems for steels - Part 2: Numerical system
- ISIRI 8410-1;Stainless steels –‐ Part 1: List of stainless steels
- ISIRI 8410-2;Stainless steels - Part 2: Technical delivery conditions for general purpose sheet/plate and strip
- ISIRI 8410-3;Stainless steels –‐ Part 3 : General purpose semi-finished products, bars, rods and profiles Technical delivery conditions
- ISIRI 841-1;Run-time testing for liquefied petroleum gas (LPG) cylinders
- ISIRI 8427-1; Road vehicles - Test method for determining the amount of transport at the center Part 1: Weaving test
- ISIRI 8427-2; Road vehicles Test method for central transport quantification - Part 2: Pass test
- ISIRI 8429-1; Passenger cars - Freewheeling behavior - Part 1: Steering release open loop test method
- ISIRI 8429-2; Passenger cars Freewheeling behavior‐ Part 2: Steering stroke open-loop test method
- ISIRI 8436-4; Sterilization of healthcare products - Chemical indicators - part 4: Class 2 indicators as an alternative to the Bowie and Dick type test for the detection of steam penetration
- ISIRI 8445-1;Space systems – Fluid characteristics, sampling and testing methods – Part 1: Oxygen
- ISIRI 8445-10; Space systems – Fluid characteristics, sampling and testing methods – Chapter 10: Water
- ISIRI 8445-11;Space systems – Fluid characteristics, sampling and testing methods –Part 11: Ammonia
- ISIRI 8445-12; Space systems – Fluid characteristics, sampling and testing methods – Chapter 12: Carbon dioxide
- ISIRI 8445-13; Space systems – Fluid characteristics, sampling and testing methods – Part 13: Inhaled air
- ISIRI 8445-2;Space systems – Fluid characteristics, sampling and testing methods –Part 2 : Hydrogen
- ISIRI 8445-3;Space systems – Fluid characteristics, sampling and testing methods –Part 3 : Nitrogen
- ISIRI 8445-4;Space systems – Fluid characteristics, sampling and testing methods – Part 4: Helium
- ISIRI 8445-5;Space systems – Fluid properties, sampling and testing methods – Part 5: Nitrogen tetroxide propellants
- ISIRI 8445-6; Space systems – Fluid characteristics, sampling and testing methods – Part 6: Monomethylhydrazine propellant
- ISIRI 8445-7;Space systems – Fluid characteristics, sampling and testing methods –Part 7: Hydrazine propellant
- ISIRI 8445-8; Space systems – Fluid properties, sampling and testing methods – Part 8: Kerosene propellant
- ISIRI 8445-9;Space systems – Fluid characteristics, sampling and testing methods –Part 9 : Argon
- ISIRI 8450-1;Connecting devices – Electrical copper conductors – Safety requirements for screw and screwless type clamping units - Part 1: General requirements and special requirements for clamping units for 0,2 mm2 to 35 mm2 (inclusive) conductors
- ISIRI 8453-5; ID cards - Test methods - Part 5: Optical memory cards
- ISIRI 8453-6;roximity ID cards – Test methods – Part 6: Proximity cards
- ISIRI 8453-7; Identity cards - Test methods - Part 7: Peripheral cards
- ISIRI 8456-1; ID cards Registration technique-Part 1: Embossing
- ISIRI 8456-8; ID cards Registration technique - Part 8: Magnetic strip 51.7 kA/m (650 Oe) forced
- ISIRI 8474-1;Thermal spray-Quality requirements of thermal spray structures - Part 1: Guide to selection and use
- ISIRI 8474-2;Thermal spray-Quality requirements of thermal spray structures- Part 2: Comprehensive quality requirements
- ISIRI 8474-3;Thermal spray-Quality requirements of thermal spray structures - Part 3: Standard quality requirements
- ISIRI 8474-4;Thermal spray-Quality requirements of thermal spray structures- Part 4: Basic quality requirements
- ISIRI 8483-1; Guidelines for the implementation of statistical process control (SPC) – Part 1: Elements of SPC
- ISIRI 8508-1; Semiconductor optoelectronic devices for fiber optic system applications - Part 1: Core values and features
- ISIRI 8518-1;Leather - Vocabulary - Part 1: AN
- ISIRI 8519-1;Textiles - Color fastness to carbonization - Part 1: Aluminum chloride - Test method
- ISIRI 8519-2;Textiles - Color fastness to carbonization - Part 2: Sulfuric acid -Test method
- ISIRI 8521-1;Glass – Insulating glass units – Specification – Part 1: Air-gapped
- ISIRI 8568-1; Acoustic measurement of sound insulation in buildings and structural elements - Part 1: Requirements for laboratory test facilities with suppressed side conduction
- ISIRI 8568-10;Acoustic Measurement of sound insulation in buildings and structural elements - Part 10: Laboratory measurement of airborne sound insulation of small construction elements
- ISIRI 8568-2; Acoustic Measurement of sound insulation in buildings and structural elements - Part 2: Verification and application of determination of precision data
- ISIRI 8568-3;Acoustics - Measurement of sound insulation in buildings and building elements Part 3: Measurement of airborne sound insulation of building elements in the laboratory
- ISIRI 8568-4; Acoustic Measurement of sound insulation in buildings and structural elements‐ Part 4: Field measurements of airborne sound insulation between rooms
- ISIRI 8568-5;Acoustic Measurement of sound insulation in buildings and structural elements‐ Part 5: Area measurement of airborne sound insulation of facade elements and facades
- ISIRI 8568-7; Acoustic measurement of sound insulation in buildings and structural elements - Part 7: Field measurements of impact sound insulation of floors
- ISIRI 8568-8; Acoustic measurement of sound insulation in buildings and structural elements - Part 8: Laboratory measurements for the reduction of impact noise transmitted by floor coverings on a heavy standard floor
- ISIRI 8577-1; Specifications for electrical plastic films - Part 1: Definitions and general requirements
- ISIRI 8578-1; Power capacitors for induction heating installations - Part 1: General
- ISIRI 8581-1;Electrical measuring instruments – xt recorders‐ Part 1: Definitions and requirements
- ISIRI 8588-1;Plywood- Bonding quality- Part1:Test methods
- ISIRI 8590-1;Electrical insulation systems – Thermal evaluation procedures – - Part 1: General requirements–Low voltage
- ISIRI 8618‐102; High voltage main switch and control assembly - Part 102: High voltage alternating current disconnectors and earthing switches
- ISIRI 8618-105; High-voltage switchgear and controlgear Part 105: Alternating current switch-fuse combinations
- ISIRI 8620-21; Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 21: Special requirements for boxes and enclosures provided for hanging tools
- ISIRI 8620-22; Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - - Part 22: Special requirements for junction boxes and enclosures
- ISIRI 8620-24; Boxes and enclosures for electrical accessories for household and similar fixed electrical installations –‐ Part 24: Special rules for enclosure protection devices and similar power-consuming devices
- ISIRI 8629-1;Medical device - Symbols to be used and information to be provided on medical device labels - Part 1: General requirements
- ISIRI 8639-1; Road vehicles and internal combustion engines - Filter dictionary - part 1: Descriptions of properties of the filter and its components
- ISIRI 8639-2; Road vehicles and internal combustion engines - Filter dictionary - part 2: Descriptions of properties of the filter and its components
- ISIRI 8644-2; Road vehicles - Fuel injection equipment testing - Part 2 : Orifice plate flow measurement
- ISIRI 8663-1;Microbiology of food and animal feeds Guidelines for the preparation and production of culture media‐ Part 1: General guidelines for quality assurance for the preparation of culture media in the laboratory
- ISIRI 8663-2; Microbiology of food and animal feed - Guidelines for the preparation and production of culture media - Part 2: Practical guidelines for performance testing of culture media
- ISIRI 8674-2; Road vehicles - Air filters for passenger compartments - Part 2: Gas filtration test
- ISIRI 8679-1; Textile - Determination of slip resistance of threads in a seam in woven fabrics-Part 1: Fixed seam opening method
- ISIRI 8679-2; Textile - Determination of slip resistance of threads in a seam in woven fabrics-Part 2: Constant load method
- ISIRI 8679-3;Textile Determination of slip resistance of threads in a seam in woven fabrics - Part 3 : Needle clamp - Test method
- ISIRI 8696-1;Water quality- Determination of acute lethal toxicity to freshwater fish of aquatic substances part1(static method).
- ISIRI 8696-2;Water quality - Determination of acute lethal toxicity of aquatic substances to freshwater - Part 2: semi-static method
- ISIRI 8696-3;Water quality - Determination of acute lethal toxicity of substances to freshwater fish - part 3: Flow method
- ISIRI 8700-3; Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - - Part 3: Features and use of the diagnostic connector and associated electrical circuits
- ISIRI 8700-4; Road vehicles Communication between vehicle and external equipment for emissions-related diagnostics - Part 4: External test equipment
- ISIRI 8700-5; Road vehicles Communication between vehicle and external equipment Emissions diagnostic - Part 5: Emissions diagnostic services
- ISIRI 8700-7; Road vehicles – Communication between vehicles and external equipment for emissions-related diagnostics – Part 7 : Data link security
- ISIRI 8716-2; Fiber optic cables - - Part 2: Indoor cables - Sectional - Specifications
- ISIRI 8716-2-10; Fiber optic cables - Part 2-10: Indoor cables - Family specifications for unidirectional and duplex cables
- ISIRI 8716-2-20; Fiber optic cables - Part 2-20: Indoor cables - Family specifications for multiple fiber optic distribution cables
- ISIRI 8716-2-30; Fiber optic cables – - Part 2 30: Indoor cables – Family specifications for optical fiber ribbon cables
- ISIRI 8716-2-31; Optical fiber cables - Part 2-31: Indoor cables Detailed specifications of fiber optic ribbon cables for use in building cables
- ISIRI 8724-1; Residual current-operated circuit breakers with integrated overcurrent protection for household and similar uses (RCBO
- ISIRI 8733-2; Small boat Airborne sound emitted by motor cruiser - Part 2: Sound evaluation using reference boat
- ISIRI 874-3-5;Equipment reliability testing - Part 3: Preferred test conditions Part 5: Test cycle 5: Ground mobile equipment Low degree of simulation
- ISIRI 8745-2; Equipment reliability testing –‐ Part 2: Design of the test cycle
- ISIRI 8745-3-1;Equipment reliability testing - Part 3: Preferred test conditions Part 1: Indoor portable equipment - low degree of simulation
- ISIRI 8745-3-2; Equipment reliability testing – Part 3: Preferred test conditions – Part 2: Equipment for stationary use in weather protected locations – High degree of simulation
- ISIRI 8745-3-3; Equipment reliability testing - Part 3: Preferred test conditions Part 3: Test cycle 3: Equipment for stationary use in partially weatherproof locations Low degree of simulation
- ISIRI 8745-3-4;Equipment reliability testing –‐ Part 3: Preferred test conditions – Part 4: Test cycle 4: Equipment for portable and non-stationary use – low degree of simulation
- ISIRI 8745-3-6; Equipment reliability testing – Part 3 : Preferred test conditions – Part 6 : Test cycle 6 : Outdoor portable equipment – Low degree of simulation
- ISIRI 8754-1; ID cards-Thin flexible cards- Part 1: Physical properties
- ISIRI 8754-3; ID cards-Thin flexible cards- Part 3:Test methods
- ISIRI 8759-2; Graphic symbols for use in detailed map plans and geological sections‐ Part 2: Representation of sedimentary rocks
- ISIRI 8759-3; Detailed map plans and graphic symbols for use in geological sections - Part 3: Representation of igneous rocks
- ISIRI 8759-4; Graphic symbols for use in detailed map plans and geological sections - Part 4 : Representation of metamorphic rocks
- ISIRI 8759-5; Graphic symbols for use in detailed map plans and geological sections - Part 5 : Representation of minerals
- ISIRI 8759-6; Graphic symbols for use in detailed chart plans and geological sections - Part 6: Metasomatic pneumatolytic or
- ISIRI 8759-7; Graphic symbols for use in detailed map plans and geological sections - Part 7 : Tectonic symbols
- ISIRI 8766-1;Petroleum and related products - Determination of aging behavior of blocked oils and fluids - TOST test Part 1: Procedure for mineral oils
- ISIRI 8766-2;Petroleum and related products - Determination of aging behavior of blocked oils and fluids - TOST test Part 2: Procedure for category HFC hydraulic fluids
- ISIRI 8768-1;Aerospace –Metallic materials – Verification of static uniaxial testing machines Part 1: Tension/Compression testing machines – Verification and calibration of the force measurement system
- ISIRI 8795-2; Marine Small craft - Fire protection - - Part 2: Boat with a hull length of more than 15 m
- ISIRI 8822-1;Shipbuilding and marine structures Filling connection for potable water tanks - Part ((General requirements)
- ISIRI 8822-2; Shipbuilding and marine structures Filling connection for potable water tanks - Part 2(Components
- ISIRI 8831-1;Paints and varnishes -‐ Colorimetry -‐ Part 1: Principles
- ISIRI 8831-3; Paints and varnishes - Colorimetry - Part 3 : Calculation of color differences
- ISIRI 8833-1; Non-destructive testing - Industrial radiographic films - Part 1: Classification of film systems for industrial radiography
- ISIRI 8833-2; Non-destructive testing - Industrial radiographic films Part 2: Control of film processing through reference values
- ISIRI 8834-1;Acoustics- Evaluation of sound insulation in buildings and structural elements- Part 1: Airborne sound insulation
- ISIRI 8834-2; Acoustic assessment of sound insulation in buildings and structural elements - Part 2: Impact sound insulation
- ISIRI 8859-1;Corrosion of metals and alloys – Stress corrosion testing –‐ Part 1: General guidance on test procedures
- ISIRI 8877-3;Machines for agriculture, forestry and tractors Electric lawn and garden equipment Symbols for operator controls and other displays - Part 3: Symbol for electric lawn and garden equipment
- ISIRI 8877-4; Machinery for agriculture forestry and tractors Electric lawn and garden equipment Symbols for operator controls and other displays - Part 4 : Symbols for forestry machinery
- ISIRI 8879-1; Connectors for optical fibers and cables – Part 1: General specifications
- ISIRI 8879-14-1;b Connectors for optical fibers and cables Part 14 1: Detail specification for fiber optic connector type SC PC standard terminated with multimode fiber type A1a A1b
- ISIRI 8879-14-10; Connectors for optical fibers and cables - Part 14 10: Fiber optic pigtail or patch cord connector type SC APC non-adjusted 8° terminated to single mode fiber type B1 detail specification
- ISIRI 8879-14-2; Connectors for optical fibers and cables - Part 14 2: Detail specification for fiber optic connector type SC PC tuned, single mode fiber terminated to type B
- ISIRI 8879-14-5; Connectors for optical fibers and cables – Part 14 5Detail specification for fiber optic connector type SC PC PC non-adjusted terminated single-mode fiber type B
- ISIRI 8879-14-6; Connectors for fiber optics and cables - Part 14 6: Detail specification for fiber optic connector type SC APC 9° non-adjustable, single-mode fiber terminated to type B
- ISIRI 8879-14-7; Connectors for fiber optics and cables - Part 14 7: Detail specification for fiber optic connector type SC APC with 9° setting, single mode fiber terminated to type B
- ISIRI 8879-14-9; Connectors for fiber optics and cables - Part 14 9: Fiber optic connector type 8° single mode fiber terminated in B1 type with SCAPC adjustment Detail specification
- ISIRI 8879-19-1; Fiber optic interconnect devices and passive components Connectors for optical fibers and cables - - Part 19 1: Fiber optic patch cord connector type SC PC (floating duplex) standard terminated on multimode fiber type A1a A1b Detail specification
- ISIRI 8879-19-3; Fiber optic interconnect devices and passive components Connectors for optical fibers and cables – - Part 19 3: SC type fiber optic adapter (duplex) for multimode fiber connectors Detail specifications
- ISIRI 8884-1;Fiber optic adapters - Part1: General specifications
- ISIRI 8885-3; Fiber optic communication system design guides - Part 3: Calculation of polarization mode distribution
- ISIRI 8886-1;spectral grids for WDM applications:DWDM frequency grid
- ISIRI 8890-1; Biotechnology - Terminology
- ISIRI 8900-3;Medical microbiology Culture medium –‐ Part 3: Dipslide Specification and test methods
- ISIRI 8900-4;Medical microbiology Culture medium Transport system for samples containing bacteria Specification and test method
- ISIRI 8902-1; sleep apnea respiratory therapy - Part 1: sleep apnea respiratory therapy devices - Test method and features
- ISIRI 8902-2;Sleep apnea respiratory therapy – Part 2: Masks and application accessories - Specifications and test methods
- ISIRI 89-1; Cabbage specification and test methods
- ISIRI 8913-1;Water quality – Determination of ammonium– – Part 1: Manual spectrometric method
- ISIRI 8913-2;Determination of water quality mmmonium Part 2: Automated spectrometric method
- ISIRI 8919-3; Bales -‐ Part 3: Cotton bales -‐ Packaging and labeling
- ISIRI 8923-1; Microbiology of food and animal feed - Initial suspension of test samples for microbiological examination and preparation of decimal dilutions - Part 1: General rules for the preparation of initial suspension and decimal dilutions
- ISIRI 8923-2; Microbiology of food and animal feed - Preparation of initial suspension and decimal dilutions of test samples for microbiological examination - Part 2: Special rules for the preparation of meat and meat products
- ISIRI 8923-3; Microbiology of food and animal feed - Preparation of initial suspension and decimal dilutions of test samples for microbiological examination - Part 3: Specific rules for the preparation of fish and aquaculture products
- ISIRI 8923-4;Microbiology of food and animal feed - Preparation of initial suspension and decimal dilutions of test samples for microbiological examination
- ISIRI 8944-3;Paints and varnishes - Determination of hiding power - Part 3: Determination of contrast ratio (opacity) of light-coloured paints at a constant diffusion rate
- ISIRI 8957-1;Petroleum and related products – Determination of corrosion resistance of refractory hydraulic fluids –‐ Part 1: Liquids containing water Test method
- ISIRI 8957-2;Installation requirements of electrical equipment on board - Part 352: Selection and installation of electrical wiring
- ISIRI 8964-1;Sports mats – - Part 1: Gymnastics mats Safety requirements
- ISIRI 8964-2;Sports mats - Part 2: Pole vault and high jump mats - Safety requirements
- ISIRI 8964-3;Sports mats - Part 3: Judo mats - Safety requirements
- ISIRI 8964-4;Sport mats – Part 4: Determination of shock absorption
- ISIRI 8964-5;Sports mats – Part 5: Determination of tread friction
- ISIRI 8964-7;Sport mats – Part 7: Determination of static hardness
- ISIRI 8986-1; Green and black tea Determination of characteristic substances of green and black tea – Part 1: Total polyphenol content in tea – Colorimetric method using Folin ‐Ciocalteu reagent
- ISIRI 8986-2; Green and black tea Characteristic determination of green and black tea‐ Part 2: Catechin content in the green tea method using high performance liquid chromatography
- ISIRI 8987-1; Recreational vehicles and devices - Part 1: Design and construction
- ISIRI 8987-2; Recreational vehicles and devices - Part 2: Operation and maintenance
- ISIRI 8987-3; Recreational vehicles and devices - Part 3: In-service review
- ISIRI 8990-1;Agricultural machinery Irrigation equipment Filters for micro irrigation - Part 1: Term definitions and classification
- ISIRI 8995-1;Agricultural machinery - Irrigation equipment Sprinkler‐ Part 1: Definition and classification of terms
- ISIRI 8995-3;Agricultural machinery - Irrigation equipment Sprinkler - Part 3: Characterization of distribution and test methods
- ISIRI 8997-5; Information technology – Database languages – SQL multimedia and application packages – Chapter 5: Still Imag
- ISIRI 9007-1;Water quality - Determination of benzene and some derivatives - Part 1: Headspace gas chromatographic method
- ISIRI 9007-2;Water quality – Determination of benzene and some derivatives –‐ Part 2: Extraction and method using gas chromatography
- ISIRI 9008-1;Pneumatic fluid power Five-port directional valves - Part 1:Assembly of interface surfaces without electrical connector Requirements
- ISIRI 9008-2;Pneumatic fluid power Five-point directional valves - Part 2: Installation of interface surfaces with optional electrical connectors‐ Requirements
- ISIRI 9009-1;Pneumatic fluid power Compressed air lubricants - Part 1: Main features and product marking requirements to be included in supplier literature
- ISIRI 9009-2;Pneumatic fluid power Compressed air lubricants‐ Part 2: Test methods to identify key characteristics to include in supplier literature
- ISIRI 9026-1; Electromechanical switches for use in electronic equipment - Part 1: General specifications
- ISIRI 9026-3; Electromechanical switches for use in electronic equipment - Part 3: Sectional specifications for in-line packet switches
- ISIRI 9026-4;Electromechanical switches for use in electronic equipment - Part 4: Sectional specifications for lever (toggle) switches
- ISIRI 9037-1; Pesticides Multiple Residue methods for the gas chromatographic determination of pesticide residues in lean foods - Part 1: Generals
- ISIRI 9037-2; Pesticide Multi-Residue methods for the gas chromatographic determination of pesticide residues in non-oily foods - Part 2: Extraction and cleaning
- ISIRI 9037-3; Pesticides Multiple Residue methods for gas chromatographic determination of pesticide residues in lean foods - Part 3: Detection and confirmation tests
- ISIRI 9040-1;Determination of inhibitory effect of water samples on light emission of water quality Vibrio fisheri (Luminescent bacteria test) - Part 1 Method using freshly prepared bacteria
- ISIRI 9040-2;Determination of the inhibitory effect of Vibrio fischeri on light emission from water samples on water quality (Luminescent bacteria test) - Part 2:Method of using liquid dried bacteria
- ISIRI 9047-3; Space systems – Surface cleaning of fluid systems – Part 3: Analytical procedures for the determination of non-volatile residues and particulate contamination
- ISIRI 9047-4; Space systems – Surface cleaning of fluid systems – Part 4: Rough cleaning operations
- ISIRI 9047-5; Space systems – Surface cleaning of fluid systems – Part 5: Drying processes
- ISIRI 9047-6; Space systems – Surface cleaning of fluid systems – Part 6: Fine cleaning processes
- ISIRI 9049-1; Indicator light units for household and similar fixed electrical installations – Part 1: General requirements
- ISIRI 9050-1; Surface-mounted piezoelectric devices for frequency control and selection – Standard trunking and terminal wiring – Part 1: Plastic molded enclosure outlines
- ISIRI 9050-2; Surface-mounted piezoelectric devices for frequency control and selection – Standard trunking and terminal wiring – Part 2 : Ceramic enclosures
- ISIRI 9050-3; Surface-mounted piezoelectric devices for frequency control and selection – Standard trunking and terminal wiring – Part 3: Metal enclosures
- ISIRI 9065-1;Tolerances for fasteners –‐ Part 1 :Bolts/screws/studs and nuts–Product grades A‐B and c‐Specifications
- ISIRI 9065-3; Tolerances for fasteners -‐ Part 3: Flat washers for bolts, screws and nuts -‐ Product grades A and C
- ISIRI 9072-1; H or Z type cross recess countersunk flat head screw (common head style) Product grade A –‐ Part 1: Feature class 4 steel. 8 – Features
- ISIRI 9072-2;Cross countersunk head flat head screws (common head style) Class A - Part 2: Feature class 8.8 stainless steel and non-ferrous metals steel
- ISIRI 9093-1; Mobile equipment for the continuous handling of bulk materials – Part 1: Rules for the design of steel structures
- ISIRI 9102-1; Natural gas Determination of composition with defined uncertainty by gas chromatography - Part 1: Guidelines for specific analysis
- ISIRI 9103-3; Determination of natural gas composition with uncertainty defined by gas chromatography - Part0 : Determination of hydrogen helium oxygen nitrogen carbon dioxide and hydrocarbons up to C3 using two packed columns
- ISIRI 9112-0; Introducing the Advanced Telecom Operations Map (eTOM)
- ISIRI 9112-1; Enhanced Telecom Operations Map (eTOM) – Business process framework
- ISIRI 9112-2; Enhanced Telecom Operations Map (eTOM) – Process breakdowns and explanations
- ISIRI 9114-1; Devices for connecting luminaires for household and similar purposes – Part 1: General requirements
- ISIRI 9116-1;Plastic-Pipes and fittings for non-pressurized underground drainage and sewer-Structural wall piping systems from polyethylene (PE)-Part 1: General requirements and performance characteristics
- ISIRI 9116-2; Plastic pipes and fittings for pressure-free underground drainage and sewerage Wall piping systems constructed from Polyethylene (PE) - Part 2: Pipes and fittings with smooth inner and outer surfaces Type a - Specifications
- ISIRI 9116-3; Plastic pipes and fittings for pressure-free underground drainage and sewerage Wall piping systems constructed from Polyethylene (PE) - Part 3: Pipes and fittings with smooth inner and outer surfaces Type B - Specifications
- ISIRI 9127-1; Rubber tubing and hoses for fuel lines for internal combustion engines - Specifications - Part 1: Conventional liquid fuels
- ISIRI 9134-1; Waste management in the clinical laboratory - Part 1: Programming management Guide
- ISIRI 9134-2; Waste management clinical laboratory Chapter 2: Infection waste -Guidelines
- ISIRI 9134-3; Waste management in the clinical laboratory Chapter 3: Chemical waste - Guide
- ISIRI 9134-5; Waste management in the clinical laboratory – Part 5: Detection and separation of mixed hazardous waste – Guideline
- ISIRI 9137-1; Sound scattering properties of Acoustic Surfaces – - Part 1: Measurement of random scattering coefficient in an echo chamber
- ISIRI 9142-4;Aircraft – Terminal connection systems –Part 4: Detail specification for Type 2 system
- ISIRI 9150-10; Masonry mortar Test method - Part 10: Determination of dry bulk density of hardened mortar
- ISIRI 9150-11; Masonry mortar - Test method - Part 11: Determination of flexural and compressive strength of hardened mortar
- ISIRI 9150-12; Masonry mortar Test method - Part 12: Determination of the bond strength of cured plaster and plaster mortars on substrates
- ISIRI 9150-17; Masonry mortar Test method - Part 17: Determination of the water-soluble chloride content of fresh mortars
- ISIRI 9150-18; Masonry Mortar Test Method - Part 18: Determination of water absorption coefficient due to capillary effect of hardened mortar
- ISIRI 9150-19; Masonry mortar Test method - Part 19: Determination of water vapor permeability of cured plaster and plaster mortars
- ISIRI 9150‐21; Mortar for masonry – - Part 21: Determination of compatibility of single coat plaster mortars with substrates – Test method
- ISIRI 9150-3; Mortar for masonry‐ Test method Part 3: Determination of consistency of fresh mortar (with flow chart)
- ISIRI 9150-6; Bulk Mortar - Test Methods - Part 6: Determination of bulk density of fresh mortar
- ISIRI 9150-7; Mortar-Test method for masonry – Part 7: Determination of air content of fresh mortar
- ISIRI 9150-9; Masonry mortar Test method - Part 9: Determination of workable life and fix time of fresh mortar
- ISIRI 9162-1;Bearing - Linear motion bearings - Part 1: Dynamic load ratio and life cycle
- ISIRI 9162-2;Bearing - Linear motion bearings - Part 2:Static load ratings
- ISIRI 9163-1; Plain bearings - Hydrodynamic plain thrust bearings in steady state conditions - Part 1: Calculation of thrust pillow bearings
- ISIRI 9165-1;Machines for agriculture and forestry Safety requirements and tests for pole-mounted electric pruners - Part 1:Units equipped with an integrated combustion engine
- ISIRI 9165-2;Machines for agriculture and forestry Safety requirements and tests for pole-mounted electric pruners - - Part 2: Units for use with backpack power supply
- ISIRI 9169-11;Ceramic tiles - - Part 11 : Determination of cracking resistance for glazed tiles
- ISIRI 9169-12;Ceramic tiles –‐ Part 12: Determination of frost resistance
- ISIRI 9169-4;Ceramic tiles - - Part 4 : Determination of rupture modulus and breaking strength
- ISIRI 9169-5;Ceramic tiles -Test method - Part 5: Determination of impact resistance by measuring the aging coefficient
- ISIRI 9169-9;Ceramic tiles - - Part 9 : Determination of resistance to thermal shock
- ISIRI 9187-1;Refrigerated display cases – - Part 1: Glossary
- ISIRI 9187-2; Refrigerated display cases – Part 2: Classification requirements and test conditions
- ISIRI 9188-1;Milk - Determination of nitrogen content- Part 1: Kjeldahl method
- ISIRI 9188-4; Milk - Determination of nitrogen content-Part 4: Determination of non-protein nitrogen content
- ISIRI 9188-5; Milk Nitrogen content determination - Part 5 : Protein-nitrogen content determination
- ISIRI 9219-1; Equipment for children Changing units Safety requirements
- ISIRI 9219-2; Equipment for children – Varying units Test methods
- ISIRI 9220-1; Surgical implants Wear of all knee joint prostheses – Part 1: Loading and displacement parameters for load-controlled abrasion testing machines and relevant environmental conditions for testing
- ISIRI 9220-2; Surgical implants-Abrasion of complete knee joint prostheses-Part2: Measurement methods
- ISIRI 9226-1;Petroleum and natural gas industries - Materials for use in environments involving oil and gas production - Part 1: General principles for the selection of crack resistant materials
- ISIRI 9236-1;Classification of environmental conditions- Part 1: Environmental parameters and their severity
- ISIRI 9236-2-2;Classification of environmental conditions-Part 2-2:Environmental conditions occurring in nature-Rain and wind
- ISIRI 9236-2-3;Classification of environmental conditions-Part 2-3:Environmental conditions occurring in nature-Air pressure
- ISIRI 9236-2-4; Classification of environmental conditions – Part 2-4: Environmental conditions occurring in nature – Solar radiation and temperature
- ISIRI 9236-2-5; Classification of environmental conditions‐ Part 2-5: Environmental conditions apparent in nature – Dust, sand, salt mist
- ISIRI 9236-2-6; Classification of environmental conditions - Part 2-6: Environmental conditions occurring in nature - Earthquake vibration and shock
- ISIRI 9236-2-7; Classification of environmental conditions - Part 2-7: Environmental conditions appearing in nature - Fauna and flora
- ISIRI 9236-2-8; Classification of environmental conditions - Part 2-8: Environmental conditions appearing in nature - Exposure to fire
- ISIRI 9236-3-0;Classification of environmental conditions - Part 3-0: Classification of environmental parameter groups and their severity - Introduction
- ISIRI 9236-3-1; Classification of environmental conditions - Part 3-1: Classification and severity of environmental parameter groups - Storage
- ISIRI 9236-3-2;Classification of environmental conditions-Part 3-2:Classification of environmental parameter groups and their severity-Transportation
- ISIRI 9236-3-3; Classification of environmental conditions - Part 3-3: Classification of environmental parameter groups and their intensities - Fixed use in places protected from the weather
- ISIRI 9236-3-7; Classification of environmental conditions - Part 3-7: Classification of environmental parameter groups and their severity - Portable and non-stationary use
- ISIRI 9241-2; Environmental engineering Power supply interface at the input of telecommunications equipment - Part 2: Direct current (dc) driven
- ISIRI 9241-3; Environmental engineering Power supply interface at the input of telecommunications equipment - Part 3: Powered by a rectified current source, an alternating current source or a direct current source up to 400 V
- ISIRI 9260-1;Aeronautics - Aircraft ground equipment - Design test and maintenance for towbarless towing vehicles (TLTV) interfaced with nose landing gear - part 1: Mainline aircraft
- ISIRI 9260-2; Aviation - Aircraft ground equipment - Design test and maintenance for drawbarless towing vehicles (TLTV) interfaced with nose landing gear - part 2: Regional aircraft
- ISIRI 9262-1; Respiratory filters for anesthesia and respiratory use – Part 1: Salt test method to evaluate filtration performance
- ISIRI 9262-2; Respiratory filters for anesthesia and respiratory use – Part 2: Non-filtration aspects
- ISIRI 9273-1;Industrial plate screens - Part 1: Thickness of 3 mm and above
- ISIRI 9273-2;Industrial plate sieves-Part 2: Thickness below 3mm
- ISIRI 9276-1;Industrial wire screens and woven wire cloth Guide for selection of combinations of aperture size and wire diameter - Part 1: Generals
- ISIRI 9276-2;Industrial wire screens and woven wire cloth Guide for selection of combinations of aperture size and wire diameter - Part 2: Preferred combination for woven wire cloth
- ISIRI 9276-3; Industrial wire screens and woven wire cloth Guide to selecting combinations of aperture size and wire diameter - Part 3: Preferred combination for pre-crimped or pressure-welded wire screens
- ISIRI 9277-1;Plastics-Determination of Charpy impact strength properties-Part 1: Toolless impact test
- ISIRI 9278-4-1;Fixed radio systems -Specifications and requirements for point-to-point equipment and antennas -‐ Part 4-1: System dependent requirements for antennas
- ISIRI 9278-4-2;Fixed radio systems -‐ Specifications and requirements for point-to-point equipment and antennas -‐ Part 4-2: Harmonized EN covering the essential requirements of Article 3.2 of the R&TTE directive for antennas
- ISIRI 9290-1;Raw cattle hides and calf hides -‐ Part 1: Identification of defects
- ISIRI 9294-1;Sockets for general purpose wire ropes - Part 1: General specifications and acceptance conditions
- ISIRI 9294-2; Sockets for general purpose wire ropes - Part 2: Special requirements for forged or solid machined sockets
- ISIRI 9294-3;Sockets for general purpose wire ropes - Part 3: Special requirements for sockets produced by casting
- ISIRI 9297-1; Geometric product - Properties (GPS) - Geometric properties - Part 1: General terms and definitions
- ISIRI 9297-2;Geometric product - Specifications (GPS) - Geometric properties - Part 2 : Subtracted median line of a cylinder and a cone, local size of a subtracted feature
- ISIRI 9298-1;Geometric Product - Specifications (GPS) -‐ Surface texture: Profile method, Surfaces with layered functional properties -‐ Part 1: Filtering and general measurement conditions
- ISIRI 9298-2; Geometric Product - Specifications (GPS) - Surface texture: Profile method, surfaces with layered functional properties -Part 2: Height characterization using linear material ratio curve
- ISIRI 9298-3;Geometric Product - Specifications (GPS) -‐ Surface texture: Profile method, surfaces with layered functional properties - Part 3: Height characterization using material probability curve
- ISIRI 9299-1; Detection capability – Part 1: Terms and definitions
- ISIRI 9299-2; Detection capability – Part 2: Methodology in case of linear calibration
- ISIRI 9300-1;Destructive tests on welds in metallic materials -‐ Hardness testing -‐ Part 1: Hardness testing of arc-welded joints
- ISIRI 9300-2;Destructive tests on welds in metallic materials -‐ Hardness testing -‐ Part 2:Microhardness testing of welded joints
- ISIRI 9314-20;Technical drawings -‐ General presentation principles -‐ Chapter 20: Basic rules for lines
- ISIRI 9314‐21;Technical drawings ‐ General presentation principles‐ Part 21: Preparation of lines with CAD systems
- ISIRI 9314‐22;Technical drawings -‐ General presentation principles -‐ Chapter 22: Basic rules and practices Leading lines and reference lines
- ISIRI 9314‐23;Technical drawings -‐ General presentation principles -‐ Part 23: Lines on construction drawings
- ISIRI 9314-24;Technical drawings -‐ General presentation principles -‐ Chapter 24: Lines on mechanical engineering drawings
- ISIRI 9314-30;Technical drawings -‐ General presentation principles -‐ Chapter 30: Basic rules for views
- ISIRI 9314‐34;Technical drawings -‐ General presentation principles -‐ Chapter 34: Comments on mechanical engineering drawings
- ISIRI 9314-40;Technical drawings -‐ General presentation principles -‐ Chapter 40:Basic rules for cuts and sections
- ISIRI 9315-1; Test conditions for manually controlled milling machines with fixed height table – Test of accuracy – part 1: Horizontal spindle machines
- ISIRI 9315-2; Test conditions for manually controlled milling machines with fixed height chart - Accuracy test - - part 2: Vertical spindle machines
- ISIRI 9322-1;Ferroalloys Sampling and sample preparation for chemical analysis - part1:Ferrochrome ferrosilicochrome ferrosilicon ferrosilicomanganese ferromanganese
- ISIRI 9322-2;Ferroalloys Sampling and sample preparation for chemical analysis - Part 2Ferrotitanium ferromolybdenum ferrotungsten ferroniobium ferrovanadium
- ISIRI 9373-1; Storage of cereals and pulses - - Part 1: General recommendations for storage of cereals
- ISIRI 9373-2; Storage of cereals and pulses - Part 2 : Practical advice
- ISIRI 9373-3; Storage of cereals and legumes - Part 3 : Control of pest attack
- ISIRI 9386-2;Determination of stone chip resistance of paints and varnishes - Part 2: Single impact test with guided impact body
- ISIRI 9387-1; Water quality Detection of polycyclic aromatic hydrocarbons (PAH) - part 1: Detection of six PAHs by high performance thin layer chromatography with fluorescence detection after liquid liquid extraction
- ISIRI 9387-2; Water quality Detection of polycyclic aromatic hydrocarbons (PAH) - part 2: Determination of six PAHs by high-performance liquid chromatography with fluorescent detection after liquid-liquid extraction
- ISIRI 9388-1;Water quality Determination of selected alkylphenols – - Part 1: Method for unfiltered samples using liquid – Liquid extraction and gas chromatography with mass selective detection
- ISIRI 940-1; STATISTICAL-WORDS AND SYMBOLS CHAPTER 1- GENERAL STATISTICAL TERMS
- ISIRI 940-2; Statistical - words and symbols part 2: sampling and quality control terms
- ISIRI 9404-1; Animal and vegetable fats and oils - Determination of stigmastadienes in vegetable oils - Part 1: Method using capillary-column gas chromatography (Reference method
- ISIRI 9404-2; Animal and vegetable fats and oils - Determination of stigmastadienes in vegetable oils - Part 2: Method using high performance liquid chromatography (HPLC)
- ISIRI 9406-1;Dimensions and output series for rotating electrical machines - - Part 1: Frame numbers 56 to 400 and flange numbers 55 to …
- ISIRI 9406-2; Dimensions and output series for rotating electrical machines – Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to …
- ISIRI 9406-3;Dimensions and output series for rotating electrical machines - Part 3: Small onboard motors Flange numbers BF10 - BF50
- ISIRI 9413-1; Acoustics - Recommended practice for the design of low noise workplaces with machinery Part 1: Noise control strategies
- ISIRI 9413-2; Acoustics - Recommended practice for the design of low noise workplaces with machinery Part 2: Noise control measures
- ISIRI 9414-2; Aseptic processing of health care products - Part 2: Filtration
- ISIRI 9414-3; Aseptic processing of health care products - Part 3: Lyophilization
- ISIRI 9414-4;Plastics – Determination of dynamic mechanical properties – – Part 5: Bending vibration – Non-resonant method
- ISIRI 9414-5;Aseptic processing of health care products - Part 5:Sterilization in situ
- ISIRI 9414-6; Aseptic processing of healthcare products - Part 6: Isolator systems
- ISIRI 9416-1;Plastics - Determination of dynamic mechanical properties - Part 1: General principles
- ISIRI 9416-10;Plastics - Determination of dynamic mechanical properties - Part 10 : Complex shear viscosity using parallel plate oscillating rheometer
- ISIRI 9416-2;Plastics - Determination of dynamic mechanical properties - Part 2: Torsion pendulum method
- ISIRI 9416-3;Plastics - Determination of dynamic mechanical properties - Part 3 : Bending vibration - Resonance curve method
- ISIRI 9416-4;Plastics – Determination of dynamic mechanical properties – – Part 4: Tensile vibration – Non-resonant method
- ISIRI 9416-5; Plastics - Determination of dynamic mechanical properties - Part 5 : Bending vibration - Non-resonance method
- ISIRI 9416-6;Plastics – Determination of dynamic mechanical properties – – Part 6 : Shear vibration – Non-resonant method
- ISIRI 9416-7;Plastics – Determination of dynamic mechanical properties – – Part 7: Torsional vibration – Non-resonant method
- ISIRI 9416-8;Plastics – Determination of dynamic mechanical properties –‐ Part 8: Longitudinal and shear vibration – Wave propagation method
- ISIRI 9416-9;Plastics – Determination of dynamic mechanical properties – – Part 9 : Tensile vibration – Sonic impact propagation method
- ISIRI 9419-1; Cable Routes Safety requirement for ropeway installations designed to carry people - Ropes - - Part 1: Selection criteria for ropes and fixing their ends
- ISIRI 9419-2; Cableways for cable car installations designed to transport people Safety requirement Ropes - Part 2 : Safety factors
- ISIRI 9419-3; Cableways for ropeway installations designed to transport people Safety requirement - Ropes‐ Part 3: Long splicing of 6-wire tow, transport and tow ropes
- ISIRI 9419-4; Cableways for ropeway installations designed to transport people Safety requirement - Ropes - Part 4 : End fastening
- ISIRI 9419-5; Cableways for ropeway installations designed to transport people Safety requirement Ropes –‐ Part 5: Storage transport installation and tensioning
- ISIRI 9419-6; Cableways Safety requirement for ropeway installations designed to transport people – Ropes – Part 6: Throw criteria
- ISIRI 9419-7; Cableways Safety requirement for ropeway installations designed to transport people - Ropes - Part 7: Inspection, repair and maintenance
- ISIRI 9419-8; Cableways Safety requirement for ropeway installations designed to carry people - Ropes - Part 8: Magnetic rope test (MRT
- ISIRI 9422-1; Hydraulic fluid power Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors Part 1: Inch series denoted in metric units
- ISIRI 9422-2; Hydraulic fluid power Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 2: Metric series
- ISIRI 9423-1;Hydraulic fluid power - Characterization of motors -Part 1: At constant low speed and constant pressure
- ISIRI 9423-2; Hydraulic fluid power - Characterization of motors -Part 2: Starting ability
- ISIRI 9423-3;Hydraulic fluid power - Characterization of motors -Part 3: At constant flow and constant torque
- ISIRI 9424-1;Fire protection Portable and wheeled fire extinguishers‐ Part 1: Selection and installation
- ISIRI 9424-2;Fire protection Portable and wheeled fire extinguishers‐ Part 2: Inspection and maintenance
- ISIRI 9427-1; Injection containers and accessories - Part 1: Injection vials made of glass tubing
- ISIRI 9427-4; Injection containers and accessories - Part 4: Injection vials made of molded glass
- ISIRI 9427-6; Injection containers and accessories - Part 6: Caps for injection vials made of aluminum-plastic combinations
- ISIRI 9427-7; Injection cups and accessories - Part 7: Injection caps from aluminum-plastic combinations without overlapping plastic parts
- ISIRI 9464-1; Marine - Ships and marine technology - Drainage systems on ships and in marine structures - Part 1: Sanitary drainage - System design
- ISIRI 9464-2; Animal and vegetable fats and oils - Determination of the content of trans fatty acid isomers of vegetable fats and oils - Use of gas chromatographic method - Test method
- ISIRI 9464-4; Marine Ships and marine technology Drainage systems on ships and marine structures - Part 4: Sanitary drainage sewer waste pipes
- ISIRI 9464-5; Ships and marine technology Drainage systems on ships and in marine structures - Part 5: Drainage of deck cargo areas and swimming pools
- ISIRI 9473-3;Information and documents – Translation of Arabic characters into latin characters – – Part 3: Persian – Simplified transliteration
- ISIRI 9480-1;Functional safety Safety instrumented systems for the process industry sector - - Part 1: Framework definitions system hardware and software requirements
- ISIRI 9494-1; Carbonaceous material used in aluminum production – Calcined coke – Determination of reaction to air –‐ Part 1: Ignition temperature method
- ISIRI 9496-1;Adhesives - Batch sample preparation methods - - Part 1: Two-part systems
- ISIRI 9496-2;Adhesives – Batch sample preparation methods –‐ Part 2: High temperature curing one-piece systems
- ISIRI 9504-1; Bicycle Steel tubes for bicycles and bicycle rickshaws - Specifications - Part 1: General requirements
- ISIRI 9504-2;ERW Bicycle Steel tubes for bicycle and bicycle rickshaw - Specifications - Part2: Special requirements electric resistance welded and induction welded steel tubes
- ISIRI 9504-3;CEW Bicycle Steel tubes for bicycles and bicycle rickshaws - Specifications - Part3: Special requirements cold worked resistance welded and induction welded steel tubes
- ISIRI 9509-1;Soil quality Determination of nitrate, nitrite and ammonium in field moist soils by extraction with potassium chloride solution - Part 1:Manual method
- ISIRI 9509-2; Determination of nitrate, nitrite and ammonium in field moist soils by extraction with potassium chloride solution - Part 2: Automated method with segmented flow analysis
- ISIRI 9513-1; Optics and optical instruments - Specifications for telescopic sights - Part 1: General-purpose instruments
- ISIRI 9513-2; Optics and optical instruments - Specifications for telescopic sights - Part 2: High-performance instruments
- ISIRI 9514-1; Lasers and laser-related equipment Test methods for determining the shape of a laser beam wavefront - Part 1: Terminology and fundamentals
- ISIRI 9514-2;Lasers and laser-related equipment Test methods for determining the shape of a laser beam wavefront - Part 2:Shack-Hartmann sensors
- ISIRI 9531-2; SECTION 2:1981 Metallic powder – Determination of apparent density –‐ Part2: Scott volume measurement method
- ISIRI 9534-1; Road vehicles - Road load - Part 1: Determination under reference atmospheric conditions
- ISIRI 9534-2; Road vehicles - Road load - Part 2: Replication in chassis dynamometer
- ISIRI 9535-1; Road vehicles - Cleaning of components of fluid circuits - Part 1: Glossary
- ISIRI 9535-2;Ergonomics of thermal environment – Evaluation of thermal environments in vehicles –‐ Part 2 : Determination of equivalent temperature
- ISIRI 9535-3;Ergonomics of thermal environment – Evaluation of thermal environments in vehicles –‐ Part 3: Evaluation of thermal comfort using human subjects
- ISIRI 9535-9; Road vehicles – Cleaning of components of fluid circuits –‐ Part 9: Counting with particle sizing and automatic light quenching Particle counter
- ISIRI 9536-1;Commercial road vehicles Tow coupling and eyelets for rigid drawbars - Part 1: Strength tests for general cargo center - Axle trailers
- ISIRI 9536-2;Commercial road vehicles Draw couplings and eyelets for rigid drawbars - Part 2: Strength tests for special applications
- ISIRI 9537-1; Reducing the risk of misuse of road vehicle child restraint systems - Part 1: Forms for field studies
- ISIRI 9538-1; Road vehicles - Vehicle dynamics test methods - Part 1: General conditions for passenger vehicles
- ISIRI 9552-1; Disposable medical examination gloves - Part 1: Specifications for gloves made of rubber latex or rubber solution
- ISIRI 9556-1;Ferronickel - Determination of trace elements by electrothermal atomic absorption spectrometric method - Part 1: General requirements and sample dissolution
- ISIRI 9556-2;Ferronickel - Determination of trace elements by electrothermal atomic absorption spectrometric method - Part 2: Determination of lead content
- ISIRI 9556-3;Ferronickel - Determination of trace elements by electrothermal atomic absorption spectrometric method - Part 3 : Determination of antimony content
- ISIRI 9556-4;Ferronickel – Determination of trace elements by electrothermal atomic absorption spectrometric method- Part 4 : Determination of tin content
- ISIRI 9556-5;Ferronickel – Determination of trace elements by electrothermal atomic absorption spectrometric method- Part 5: Determination of tellurium content
- ISIRI 9556-6; Ferronickel – Determination of trace elements by electrothermal atomic absorption spectrometric method- Part 6 : Determination of thallium content
- ISIRI 9556‐7;Ferronickel - Determination of trace elements by electrothermal atomic absorption spectrometric method - Part 7 : Determination of silver content
- ISIRI 9556-8;Ferronickel - Determination of trace elements by electrothermal atomic absorption spectrometric method - Part 8 : Determination of indium content
- ISIRI 9567-2; Ferronickel - Determination of trace elements by electrothermal atomic absorption spectrometric method - Part 2 : Determination of lead content
- ISIRI 9571-8; Determination of Magnesium Alloys Aluminum 8 Hydroxyquinoline gravimetric method
- ISIRI 9581-1; Acoustics - Laboratory tests on noise emission from devices and equipment used in water supply installations - Part 1: Measurement method
- ISIRI 9581-2; Acoustic Laboratory tests for noise emission from devices and equipment used in water supply installations – Part 2: Installation and operating conditions for outlet taps and mixing valves
- ISIRI 9581-3; Acoustics - Laboratory tests for noise emission from devices and equipment used in water supply installations - Part 3: Installation and operating conditions for in-line valves and devices
- ISIRI 9581-4; Acoustics - Laboratory tests on noise emission from devices and equipment used in water supply installations - Part 4: Installation and operating conditions for special devices
- ISIRI 9584-1;Acoustics - Sound attenuation during outdoor propagation - Part 1: Calculation of sound absorption by the atmosphere
- ISIRI 9584-2;Acoustics- Sound attenuation during outdoor propagation Part 2: General calculation method
- ISIRI 9585-1;Fluid power systems and components Graphic symbols and circuit diagrams - Part 1: Graphic symbols
- ISIRI 9588-1;Pneumatic – Compressed air filters - Part1: Main features to include in supplier literature and product requirements
- ISIRI 9588-2;Pneumatic – Compressed air filters‐ Part 2: Test methods to identify key features to include in supplier literature
- ISIRI 9598-1; Information technology Security techniques Hash functions - Part 1: General
- ISIRI 9598-4;Information technology – Security techniques Hash functions - Part 4:Hash functions using modular arithmetic
- ISIRI 9629-1;Textile machines and accessories Flat warp knitting machines - Part 1: Glossary of basic structure and knitting elements
- ISIRI 9629-2; Textile machinery and accessories Plain warp knitting machines - Part 2: Vocabulary about taking and blending warp warp fabric
- ISIRI 9629-4;Textile machines and accessories -‐ Flat warp knitting machines -‐ Part 4: Vocabulary of loop tying machines and loop tying devices
- ISIRI 9639-2;Wheat and wheat flour -‐ Gluten content -‐ Part 2: Determination of wet gluten by mechanical means
- ISIRI 9639-3;Wheat and wheat flour -Gluten content -Part 3: Determination of dry gluten from fresh gluten by oven drying method
- ISIRI 9639-4;Wheat and wheat flour -‐ Gluten content -‐ Part 4: Determination of dry gluten from wet gluten by rapid drying method
- ISIRI 9661-1; Microbiology of food and animal feed Campylobacter spp. Horizontal method for detection and counting. - Part 1: Detection method
- ISIRI 9661-2; Microbiology of food and animal feed – Horizontal method for detection and enumeration of Campylobacter spp. - Part 2: Colony counting technique
- ISIRI 9666-1;Textiles - Quantitative chemical analysis - Part 1 : general testing principles
- ISIRI 9666-10;Textiles - Quantitative chemical analysis - Part 10 : Triacetate and blends of polylactide with some other fibers (method using dichloromethane)
- ISIRI 9666-11;Textiles - Quantitative chemical analysis - Part 11 : Blends of cellulose with polyester fibers (method using sulfuric acid)
- ISIRI 9666-12; Textiles - Quantitative chemical analysis - Part 12: acrylic blends, certain modacrylics, certain chlorofibres, certain elastanes, and certain other fibers (method using dimethylformamide)
- ISIRI 9666-13;Textiles - Quantitative chemical analysis - Part 13 : blends of certain chlorofibers with certain other fibers (method using carbon disulfide/acetone
- ISIRI 9666-14;Textiles - Quantitative chemical analysis - Part 14 : mixtures of acetate with certain chlorofibers (method using acetic acid)
- ISIRI 9666-15;Textiles - Quantitative chemical analysis - Part 15 : Jute blends with certain animal fibers (method for determining nitrogen content)
- ISIRI 9666-16;Textiles - Quantitative chemical analysis - Part 16: Blends of polypropylene fibers with certain other fibers (method using xylene)
- ISIRI 9666-17;Textiles - Quantitative chemical analysis - Part 17: Blends of chloro fibers (vinyl chloride homopolymers) with some other fibers (method using sulfuric acid)
- ISIRI 9666-18;Textiles - Quantitative chemical analysis - Part 18: blends of silk and wool or hair (method using sulfuric acid)
- ISIRI 9666-19;Textiles - Quantitative chemical analysis - Part 19: Mixtures of cellulose fibers with asbestos (by heating method)
- ISIRI 9666-2;Textiles - Quantitative chemical analysis - Part 2: Ternary fiber blends
- ISIRI 9666-21;Textiles - Quantitative chemical analysis - Part 21: chlorofibers, acetates, blends of triacetates, certain modacrylics and elastanes, and some other fibers (method using cyclohexanone)
- ISIRI 9666-3;Textiles - Quantitative chemical analysis - Part 3: mixtures of acetate with some other fibers (method using acetone)
- ISIRI 9666-4;Textiles - Quantitative chemical analysis - Part 4: mixtures of certain proteins with certain other fibers (method using hypochlorite)
- ISIRI 9666-5;Textiles - Quantitative chemical analysis - Part 5: viscose copper or blends of modal and cotton fibers (method using sodium zincate)
- ISIRI 9666-6; Textiles - Quantitative chemical analysis - Part 6: Blends of viscose or modal or blends of certain cupro types of lyocell and cotton fibers (method using formic acid and zinc chloride
- ISIRI 9666-7;Textiles - Quantitative chemical analysis - Part 7 : Blends of polyamide with certain other fibers (method using formic acid)
- ISIRI 9666-8;Textiles - Quantitative chemical analysis - Part 8 : blends of acetate and triacetate fibers (method using acetone)
- ISIRI 9666-9;Textiles - Quantitative chemical analysis - Part 9 : blends of acetate and triacetate fibers (method using benzyl alcohol)
- ISIRI 9667-1;Microbiology of food and animal feed - Horizontal method for detection of potentially enteropathogenic Vibrio spp - Part 1: Detection of Vibrio parahamolyticus and Vibrio cholerae
- ISIRI 9667-2; Microbiology of food and animal feed. Horizontal methods for the detection of potentially enteropathogenic Vibrio spp. - Part 2: Detection of species other than Vibrio parahaemolyticus and Vibrio cholerae
- ISIRI 9668-1;Water quality Evaluation of genotoxicity by measuring micronucleus induction - Part 1: Evaluation of genotoxicity using amphibian larvae
- ISIRI 9685-1;Secondary cells and batteries containing alkaline or other non-acid electrolytes Portable sealed rechargeable single cells Part 1: Nickel - Cadmium
- ISIRI 9685-2;Secondary cells and batteries containing alkaline or other non-acid electrolytes Portable sealed rechargeable single cells Part 2: Nickel-metal hydride
- ISIRI 9697-1;Furniture chairs and tables for educational institutions - Part 1: Functional dimensions
- ISIRI 9697-2; Furniture chairs and tables for educational institutions - Part 2: Safety requirements and test methods
- ISIRI 9698-1;Office furniture Tables - Part 1:Dimensions
- ISIRI 9698-2;Office furniture Tables - Part 2: Mechanical safety requirements
- ISIRI 9698-3;Office furniture Tables - Part 3: Test methods for determining the stability and mechanical strength of the structure
- ISIRI 9702-1;Delivery requirements for the surface condition of large flats and sections of hot rolled steel plates‐ Part 1: General requirements
- ISIRI 9702-2;Delivery requirements for the surface condition of large flats and sections of hot rolled steel plates‐ Part 2: Plate and wide flats
- ISIRI 9702-3;Delivery requirements for surface condition of hot rolled steel plate, large flats and profiles -‐ Part 3: Sections
- ISIRI 9722-1;Steel and irons - Determination of nickel, copper and cobalt content - Inductively coupled plasma atomic emission spectrometric method - Part 1: General conditions and sample dissolution
- ISIRI 9722-2;Steel and irons - Determination of nickel, copper and cobalt content - Inductively coupled plasma atomic emission spectrometric method - Part 2: Determination of nickel content
- ISIRI 9722-3;Steel and irons - Determination of nickel copper and cobalt content - Inductively coupled plasma atomic emission spectrometric method - Part3: Determination of copper content
- ISIRI 9722-4;Steel and irons - Determination of nickel, copper and cobalt content - Inductively coupled plasma atomic emission spectrometric method - Part 4: Determination of cobalt content
- ISIRI 9746-1;Flat washers ‐ Large series‐ Part 1: Product class A
- ISIRI 9746-2;Flat washers ‐ Large series‐ Part 2: Product class C
- ISIRI 9757-2; Countersunk flat head screws - Part 2: Penetration depth of cross recesses
- ISIRI 9760-2; Characterization of pavement texture using surface profiles - Part 2: Terminology and basic requirements for road structure profile analysis
- ISIRI 9760-3;Characterization of pavement texture using surface profiles - Part 3: Properties and classification of profilometers
- ISIRI 9774-1;ISO general purpose screw threads Basic profile - Part 1: Metric threads
- ISIRI 9774-2;ISO general purpose screw threads Basic profile - Part 2: Inch threads
- ISIRI 9776-1; Methods for testing and rating fan coil units, unit heaters and unit coolers - Part 1: Thermal and volumetric performance for heating tasks without additional ducting
- ISIRI 9776-2; Methods for testing and rating fan coil units, unit heaters and unit coolers - Part 2: Thermal and volumetric performance for cooling tasks without additional ducting
- ISIRI 9776-3; Methods for testing and rating fan coil units, unit heaters and unit coolers - Part 3: Thermal and volumetric performance for additional ducted heating and cooling tasks
- ISIRI 9777-1;High efficiency air filters (HEPA and ULPA)‐ Part 1: Classification performance testing and marking
- ISIRI 9777-2;High efficiency air filters (HEPA and ULPA)‐ Part 2: Aerosol production measuring equipment particle count statistics
- ISIRI 9777-3; High efficiency air filters (HEPA and ULPA)‐ Part 3: Testing flat sheet filter media
- ISIRI 9777-4; High efficiency air filters (HEPA and ULPA)‐ Part 4: Filter element leak detection (Scan method)
- ISIRI 9777-5; High efficiency air filters (HEPA and ULPA)‐ Part 5: Determining the efficiency of the filter element
- ISIRI 9792-1; Packaging machinery safety - Part 1: Terminology and classification of packaging machinery and related equipment
- ISIRI 9796-1; Information technology Service management - Part 1: Specification
- ISIRI 9796-2; Information technology Service management - Part 2 : Code of practice
- ISIRI 9802-1;Measurement of smoke density of cables burning under certain conditions Part 1:Test apparatus
- ISIRI 9802-2;Measurement of smoke density of cables burning under certain conditions Part 2:Test procedure and requirements
- ISIRI 9803-1;Acoustic -‐ Determination of sound absorption coefficient and impedance in impedance tubes Part 1: Method using standing wave ratio
- ISIRI 9803-2; Acoustics - - Determination of sound absorption coefficient and impedance in impedance tubes - Part 2: Transfer function method
- ISIRI 9808-1;Mechanical vibration of non-piston machines Measurements and evaluation criteria on rotating shafts - Part 1: General rules
- ISIRI 9808-2; Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts - Part 2: 1500 rpm 1800 rpm Land-based steam turbines and generators exceeding 3000 MW at normal operating speeds of 3600 rpm and 50 rpm min
- ISIRI 9808-5; Evaluation of machine vibration by measurements on rotating shafts - Part 5: Machine sets in hydraulic power generation and pumping plants
- ISIRI 9809-1; Mechanical vibration and shock Flexible mounting systems - Part 1: Exchange technical information for the application of isolation systems
- ISIRI 9810-1; Mechanical vibration assessment of machine vibration by measurements on non-rotating parts - Part 1: General rules
- ISIRI 9810-2; Mechanical vibration assessment of machine vibration by measurements on non-rotating parts
- ISIRI 9810-5; Mechanical vibration assessment of machine vibration by measurements on non-rotating parts
- ISIRI 9810-6; Mechanical vibration assessment of machine vibration by measurements on non-rotating parts - Part 6: Reciprocating machines with power ratings above 100 kW
- ISIRI 9814-2;Fuel cell technologies -‐ Part 2 : Fuel cell modules
- ISIRI 9814-3-1;Fuel cell technologies - Part 3-1: Fixed fuel cell power systems - Safety
- ISIRI 9814-3-3;Fuel cell technologies -‐ Part 3-3: Fixed fuel cell power systems -‐ Installation
- ISIRI 9814-6-200;Fuel cell technologies -‐ Part 6-200: Micro fuel cell power systems Performance test methods
- ISIRI 9817-4;Mechanical vibration and shock -‐ Signal processing -‐ Part 4: Shock-response spectrum analysis
- ISIRI 9818-1; Mechanical vibration and shock ‐ Vibration and shock in buildings with sensitive equipment ‐ Part 1: Measurement and evaluation
- ISIRI 9818-2; Mechanical vibration and shock ‐ Vibration and shock in buildings with sensitive equipment ‐ Part 2: Classification
- ISIRI 9819-8;Quantities and units - Part 8:Acoustics
- ISIRI 9820-1;Acoustics - Definition of measurement and assessment of environmental noise - Part 1: Basic quantities and evaluation procedures
- ISIRI 9820-2; Acoustics - Definition of measurement and evaluation of environmental noise - Part 2 : Determination of environmental noise levels
- ISIRI 9822-1; Acoustics - - Statistical methods for determining and verifying specified noise emission values of machinery and equipment - Part 1: General considerations and definitions
- ISIRI 9822-2; Acoustics - - Statistical methods for determining and verifying the stated noise emission values of machinery and equipment - Part 2: Methods for the stated values for individual machines
- ISIRI 9822-3; Acoustics ‐ Statistical methods for determination and verification of specified noise
- ISIRI 9822-4; Acoustics - Statistical methods for determining and verifying the stated noise emission values of machinery and equipment - Part 4: Methods for the stated values for machine lots
- ISIRI 9829-1;Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of flexible elements -‐ Part 1: Principles and guidelines
- ISIRI 9829-2; Mechanical vibration - Laboratory method for assessing vehicle seat vibration - Part 2: Application to rolling stock
- ISIRI 9829-4; Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of flexible elements Part 4: Dynamic stiffness of elements other than flexible supports for slewing motion
- ISIRI 9830-1;Acoustic - Determination of sound insulation performance of enclosures-- Part 1: Measurements under laboratory conditions (for reporting purposes
- ISIRI 9830-2; Acoustics - - Determination of the sound insulation performance of enclosures - - Part 2: On-site measurements (for acceptance and verification purposes)
- ISIRI 9835-2; Hydraulic fluid power Determination of fluid-borne noise characteristics of components and systems - Part 2: Measurement of sound velocity in fluid in a pipe
- ISIRI 9841-1;Hydraulic fluid power Test code for determining sound power levels using sound intensity techniquesEngineering method - Part 1: Pumps
- ISIRI 9844-5; Test code for machine tools - Part 5: Determination of noise emission
- ISIRI 9845-3; Acoustic Hearing protectors – Part 3: Measurement of insertion loss of earmuff type protectors using an acoustic test armature
- ISIRI 9848-1;Acoustic Fixed sound warning devices used in outdoor - - Part 1: Field measurements for the determination of sound emission amounts
- ISIRI 9848-2; Acoustics Fixed audible warning devices for outdoor use - Part 2: Precise methods for the determination of sound emission amounts
- ISIRI 9865-1;Belt drives –Dynamic test to determine stride zone position –Part1:V-belts
- ISIRI 9865-2; Belt drives - Dynamic test to determine pitch zone position - Part2: V-ribbed belts
- ISIRI 9875-1; Clay roof tiles for continuous flooring - Determination of physical properties - - Part 1: Water impermeability test
- ISIRI 9875-2; Clay roof tiles for continuous flooring - Determination of physical properties - - Part 2 : Frost resistance test
- ISIRI 9880-1; Specifications for pressure sensitive adhesive tapes for electrical purposes - Part 1: General requirements
- ISIRI 9880-3-1;Specifications for pressure sensitive adhesive tapes for electrical purposes - Part 3: Specifications for single materials - Page 1: PVC film tapes with pressure sensitive adhesive
- ISIRI 9880-3-10; Specifications for pressure sensitive adhesive tapes for electrical purposes - Part 3: Specifications for single materials - Page 10: Requirements for cellulose-acetbutyrate film tapes with rubber thermosetting adhesive
- ISIRI 9880-3-11; Specifications for pressure sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Page 11: Glass filament polyester film combinations, creped cellulosic paper, polyester nonwoven, epoxy and pressure -
- ISIRI 9880-3-12; Specifications for pressure sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Page 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive
- ISIRI 9880-3-14; Specifications for pressure sensitive adhesive tapes for electrical purposes - Part 3: Specifications for single materials - Page 14: Polytetrafluoroethylene film tapes with pressure sensitive adhesive
- ISIRI 9880-3-19;Specifications for pressure sensitive adhesive tapes for electrical purposes -‐ Part 3: Specifications for single materials -‐ Page 19: Tapes made of various backing materials with pressure sensitive adhesive on both sides
- ISIRI 9880-3-2; Specifications for pressure sensitive adhesive tapes for electrical purposes - Part 3: Specifications for single materials - Page 2: Requirements for polyester film tapes with rubber thermoset, rubber thermoplastic or acrylic cross-linked adhesive
- ISIRI 9880-3-4; Specifications for pressure sensitive adhesive tapes for electrical purposes - Part 3: Specifications for single materials - Page 4: Cellulose paper, creped and uncreped, with rubber thermosetting adhesive
- ISIRI 9880-3-6; Specifications for pressure sensitive adhesive tapes for electrical purposes - Part 3: Specifications for single materials - Page 6: Polycarbonate film tapes with acrylic thermoplastic adhesive
- ISIRI 9880-3-7; Specifications for pressure sensitive adhesive tapes for electrical purposes - Part 3: Specifications for single materials - Page 7: Polyimide film tapes with pressure sensitive adhesive
- ISIRI 9880-3-8; Specifications for pressure sensitive adhesive tapes for electrical purposes - Part 3: Specifications for single materials - Page 8: Woven fabric tapes with pressure sensitive adhesive combined with glass, cellulose acetate alone or viscose
- ISIRI 9889-1; Road vehicles - Cleaning of components of fluid circuits - Part 1: Glossary
- ISIRI 9889-10; Road vehicles - Cleaning of components of fluid circuits - Part 10: Statement of results
- ISIRI 9889-2; Road vehicles - Cleaning of fluid circuit components - Part 2: Method of removing contaminants by agitation
- ISIRI 9889-3; Road vehicles - Cleaning of components of fluid circuits - - Part 3: Removal of contaminants by pressure rinsing
- ISIRI 9889-4; Road vehicle - Cleaning of components of fluid circuits - - Part 4: Method of removing contamination by ultrasonic techniques
- ISIRI 9889-5; Road vehicle – Cleaning of components of fluid circuits – Part 5: Method of removing contaminations on functional test bench
- ISIRI 9889-6; Road vehicles - Cleaning of components of fluid circuits - Part 6: Determination of particle mass by gravimetric analysis
- ISIRI 9889-7; Road vehicles - Cleaning of components of fluid circuits - Part 7: Particle measurement and counting by microscopic analysis
- ISIRI 9889-8; Road vehicles - Cleaning of components of fluid circuits - Part 8: Determination of particle structure by microscopic analysis
- ISIRI 9889-9; Road vehicles – Cleaning of components of fluid circuits –‐ Part 9: Particle sizing and counting with automatic light-damping particle counter
- ISIRI 9890-3; Road vehicles - Anchors in vehicles and attachments to anchors for child restraint systems - Part 3: Classification of child seat sizes and clearance in the vehicle
- ISIRI 9891-1; Cableways Safety requirements for ropeway installations designed to carry people - General requirements - - Part 1: Requirements applicable to all installations
- ISIRI 9891-2; Wirelines for ropeway installations designed to transport people Safety requirement - General requirements - Part 2: Additional requirements for reversible duplex aerial ropeways without carrier truck brakes
- ISIRI 9892-1;Agricultural machinery - Crop protection equipment - Test methods for evaluation of cleaning systems - Part 1: Internal cleaning of complete sprayers
- ISIRI 9892-2; Agricultural machinery - Crop protection equipment - Test methods for the evaluation of cleaning systems - Part 2: External cleaning of sprayers
- ISIRI 9892-3;Agricultural machinery - Crop protection equipment - Test methods for evaluation of cleaning systems - Part 3: Internal cleaning of the tank
- ISIRI 9893-1;Safety devices for protection against overpressure‐ Part 1: safety valves
- ISIRI 9893-4;Safety devices for protection against overpressure‐ Part 4: Pilot – Operated safety valves
- ISIRI 9893-5;Safety devices for protection against overpressure‐ Part 5: Controlled safety pressure relief systems (CSPRS)
- ISIRI 9893-6;Safety devices for protection against overpressure‐ Part 6: Selection and installation of rupture disk safety devices
- ISIRI 9893-7;Safety devices for protection against overpressure‐ Part 7: Common data
- ISIRI 9897-1;Petroleum products Determination of filterability of lubricating oils - Part 1: Oils in the presence of water– Test method
- ISIRI 9897-2;Petroleum products Determination of filterability of lubricating oils - Part 2 : Procedure for dry oils - Test method
- ISIRI 9916-1; Test conditions for single spindle coordinate drilling and drilling machines with vertical spindle with high precision turret and fixed height chart Testing accuracy - Part 1: Single column type machines
- ISIRI 9916-2; Test conditions for single spindle coordinate drilling and drilling machines with vertical spindle with high precision turret and fixed height table Testing accuracy - Part 2: Gantry type machines with movable table
- ISIRI 9920-1; Vacuum technology Quick release couplings Dimensions Part I : Clamp type
- ISIRI 9920-2; Vacuum technology Quick-release couplings Dimensions - Part 2: Screw type
- ISIRI 9921-1; Test conditions for columnar vertical drilling machines Accuracy test - - Part 1: Geometric test
- ISIRI 9921-2; Test conditions for column-type vertical drilling machines Accuracy test - - Part 2 : Practical test
- ISIRI 9922-1; Test conditions for box-type vertical drilling machines Accuracy test - - Part 1: Geometric test
- ISIRI 9922-2; Test conditions for box-type vertical drilling machines Test of accuracy - - Part 2 : Practical test
- ISIRI 9925-1;ISO general purpose metric screw threads - Tolerances -Part 1: Principles and basic data
- ISIRI 9925-2;ISO general purpose metric screw threads - Tolerances -Part 2: Size limits for general purpose external and internal threads -Medium grade
- ISIRI 9925-3;ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for structural screw threads
- ISIRI 9925-4;ISO general purpose metric threads - Tolerances -Part 4: Size limits for hot dip galvanized external threads to mate with tapped internal threads with tolerance position H or G after galvanization
- ISIRI 9925-5;ISO general purpose metric threads -Tolerances -Part 5: Size limits for internal threads to mate with hot dip galvanized external threads with maximum tolerance position h before galvanizing
- ISIRI 9941-1; Electromagnetic compatibility and radio spectrum considerations (ERM) Electromagnetic compatibility (EMC) standard for radio equipment and services‐ Part 1: Common technical requirements
- ISIRI 9941-4; Electromagnetic compatibility and radio spectrum considerations (ERM) Electromagnetic compatibility (EMC) standard for radio equipment and services - Part 4: Special requirements for fixed radio links ancillary equipment and services
- ISIRI 9955-1; Information and documentation Records management processes Metadata for records - Part 1: Principles
- ISIRI 9956-2; Graphic symbols Safety colors and safety markings - Part 2: Design principles for product safety labels
- ISIRI 9956-3; Graphic symbols Safety colors and safety signs – Part 3: Design principles for graphic symbols for use in safety signs
- ISIRI 9970-1; Information technology – Security techniques – Management of information and communication technology security – Part 1: Concepts and models for information and communication technology security management
- ISIRI 9973-1;Geometric product - Specifications (GPS) Inspection by measuring workpieces and measuring equipment - Part 1: Decision rules for proving conformity or nonconformity - Specifications
- ISIRI 9986-1;Machines for agriculture and tractors Seat belts-Part 1: Anchorage requirements
- ISIRI ISIRI 6436-11;Playground equipment and surfacing – Part 11: Additional specific safety requirements and test methods for the spatial network
- ISIRI ISIRI 6436-11;Playground equipment and surfacing Part 1: General safety requirements and test methods.
- ISIRI ISIRI 6436-2; Playground equipment and surfacing Part2: Additional special safety requirements and test methods for swings
- ISIRI ISIRI 6436-3; Playground equipment and surfacing Part3: Additional specific Safety requirements and test methods for slides.
- ISIRI ISIRI 6436-4;Playground equipment and surfacing – Part 4: Additional special safety requirements and test methods for cable trails
- BITT BITT - IEC 60300-1; Reliability management - Part 1: Reliability management systems
- BITT BITT - IEC 60300-2; Reliability management - Part 2: Reliability management guidelines
- ISIRI ISIRI‐ISO 10002; Quality management - Customer satisfaction - Guidelines for handling complaints in organizations
- BITT BITT - ISO 10007; Quality management systems - Guidelines for configuration management
- SECRETS - ISO 10011-1; Guidelines for auditing quality systems Part 1: Audit
- ISIRI ISIRI‐ISO 10011-2; Guidelines for auditing quality systems Part 2: Qualification criteria for quality systems auditors
- ISIRI ISIRI‐ISO 10012;Measurement management systems Requirements for measuring processes and measuring equipment
- ISIRI ISIRI‐ISO 10013;Quality management systems Guidelines for quality management system documentation
- HIDDEN TOPIC - ISO 10015; Quality management guidelines for education
- ISIRI ISIRI‐ISO 10019;Guidelines for the selection of quality management system consultants and the use of their services
- ISIRI ISIRI‐ISO 13485;Medical devices - Quality management systems - Requirements for regulatory purposes
- SECRET SECRET - ISO 14015; Environmental management - Environmental assessment of sites and establishments (EASO)
- SECRET BIT - ISO 14020; Environmental labels and statements - General principles
- SECRET SECRET - ISO 14031; Environmental management - Environmental performance assessment - Guidelines
- ISIRI ISIRI‐ISO 14040;Environmental management - Life cycle assessment - Principles and framework
- ISIRI ISIRI‐ISO 14044; Environmental management - Life cycle assessment - Requirements and guidance
- SECRET SECRET - ISO 14050; Environmental management - Glossary
- ISIRI ISIRI‐ISO 14554-1; Quality requirements for welding Resistance welding of metallic materials - Part 1: Comprehensive quality requirements: 25.160.01 - Same as
- ISIRI ISIRI‐ISO 14554-2;Quality requirements for Welding Resistance welding of metallic materials‐ Part 2: Basic quality requirements: Same as ISO 25.160.10
- HIDDEN TOPIC - ISO 14731; Resource coordination Roles and responsibilities
- ISIRI ISIRI‐ISO 15161; GUIDELINES FOR IMPLEMENTING ISO 9001 :2000 FOR THE FOOD AND BEVERAGE INDUSTRY
- ISIRI ISIRI‐ISO 15189;Medical laboratories - Special requirements for quality and competence
- ISIRI ISIRI‐ISO 16949; Special requirements for the implementation of quality management systems ISO 9001 : 2000 For automotive production and related service part organizations
- ISIRI ISIRI‐ISO 19011;Guidelines for quality and/or environmental management systems audit
- ISIRI ISIRI‐ISO 22000;Food safety management systems – Requirements for any organization in the food chain
- SECRET IS - ISO 28000; Security management systems for the supply chain - Features
- ISIRI ISIRI‐ISO 3834-1;Quality requirements for fusion welding of metallic materials - Part 1: Criteria for selecting the appropriate level of quality requirements are the same as for ISO
- ISIRI ISIRI‐ISO 3834-2;Quality requirements for fusion welding of metallic materials‐ Part 2: Comprehensive quality requirements
- ISIRI ISIRI‐ISO 3834-3;Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements
- ISIRI ISIRI‐ISO 3834-4;Quality requirements for fusion welding of metallic materials - Part 4: Basic quality requirements
- ISIRI ISIRI‐ISO 3834-5;Quality requirements for fusion welding of metallic materials - Part 5: Documents required to comply with the assertion of conformity with quality requirements of ISIRI/ISO 3834-2,3834-3 or 3834-4
- ISIRI ISIRI‐ISO 3834-6;Quality requirements for fusion welding of metallic materials Part 6: Guidelines for the application of ISO 3834
- BITT BITT - ISO 9000; Quality management systems - Fundamentals and vocabulary
- HIDDEN SECRET - ISO 9001; Quality Management Systems - Requirements
- SECRETS - ISO 9004; Quality Management Systems - Guidelines for performance improvements
- ISIRI ISIRI‐ISO/IEC 15408-1;Information technology - Security techniques - Evaluation criteria for IT Security - Part1 : Introduction and general model
- ISIRI ISIRI‐ISO/IEC 15408-2; Information technology - Security techniques - Evaluation criteria for IT Security - Part2: Security functional requirements
- SECRET BIT - ISO / IEC 17000; Conformity assessment Vocabulary and general principles
- BITT BITT - ISO / IEC 17010; General criteria for accreditation of inspection bodies
- ISIRI ISIRI‐ISO/IEC 17020;General criteria for the operation of various types of inspection bodies
- ISIRI ISIRI‐ISO/IEC 17024; Conformity assessment - General requirements for organizations operating person certificates
- ISIRI ISIRI‐ISO/IEC 17025;General requirements for the competence of test and calibration laboratories
- ISIRI ISIRI‐ISO/IEC 17030;Conformity assessment - General requirements for third-party conformity markings
- ISIRI ISIRI‐ISO/IEC 17040; Conformity assessment General requirements for peer assessment of conformity assessment bodies and accreditation bodies
- ISIRI ISIRI‐ISO/IEC 17050-1;Conformity assessment – Supplier's declaration of conformity Part 1: General requirements
- ISIRI ISIRI‐ISO/IEC 17050-2;Conformity assessment – Supplier's declaration of conformity Part 2 : Supporting documents
- ISIRI ISIRI‐ISO/IEC 25001;Software engineering - Software product quality requirements and assessment - Planning and management
- ISIRI ISIRI‐ISO/IEC 25020;Software engineering-Software product quality requirements and assessment (SQuaRE)‐ Measurement reference model and guide
- ISIRI ISIRI‐ISO/IEC 25030;Software engineering - Software product quality requirements and assessment - Quality requirements
- ISIRI ISIRI-ISO/IEC 25051;Software engineering-Software product quality requirements and assessment (SQuaRE) - Requirements and testing guidelines for the quality of commercial off-the-shelf (COTS) software product
- BITT BITT - ISO / IEC 27001; Information technology - Security techniques - Information security management systems Requirements
- BITT BITT - ISO / IEC 27002; Information technology Security techniques - Code of practice for information security management
- ISIRI ISIRI‐ISO/IEC 27006; Information technology Security techniques Requirements for organizations providing audit and certification of information security management systems