Main EN European Norm Test Standards

As EUROLAB, we provide testing and certification support for European Norms, including national standards such as Germany, England, France, Spain, Belgium, Sweden, Switzerland, Italy, Denmark, Norway and Poland, Turkey, Romania, Czech Republic.

Main EN Standards List

EN 10130 ; Cold Rolled Low Carbon Steel Flats for Cold Forming - Technical Delivery Conditions
EN 1021 - 1; Cigarette Test
EN 1021-2; Match Flame Test
EN 1049-2; Number of Subjects
EN 1097-3; Loose Bld Density and Determination of Voids
EN 1103 ; Textiles - Clothing Fabrics - Detailed Procedure for Determining Combustion Behavior
EN 1122 ; Determination of Cadmium
EN 12087 Procedure 2 ; Determination of Water Absorption
EN 12127 ; Determination of Mass Per Unit Area
EN 12260 (H34)/TN(b) ; Nitrogen Determination
EN 12280 – 1 ; Procedure 1 - Heat Aging (With Heating Cabinet)
EN 12311 - 1; Tensile Properties
EN 12373-4; Pre-Acid-Treated Paint Spot Test
EN 12393/BVL L; 00.00 – 48 – Gas Chromatographic Determination of Pesticide Residues
EN 12540 (Annex E); Cuts in Chrome Plates
EN 12720; Surface Resistance to Cold Liquids
EN 12766; ECD
EN 13130 - 4 ; 1 3Butadiene Determination
EN 13274 – 4; (Method 3)
EN 13657 – 9.2; EN 13346 – C (S7a) – Acid – determination of soluble elements
EN 1367 – 1 ; Determination of Freeze and Thaw Resistance
EN 14107 ; Oil and oil derivatives. Fatty acid methyl esters (FAME). Determination of phosphorus content by inductively coupled plasma (ICP) emission spectrometry.
EN 14111 ; Oil and oil derivatives. Fatty acid methyl esters (FAME). Determination of iodine value.
EN 14112 ; Fat and oil derivatives – Fatty Acid Methyl Esters (FAME) – Determination of oxidation stability (accelerated oxidation test)
EN 14207 ; Oil and oil derivatives. Fatty acid methyl esters (FAME). Determination of phosphorus content by inductively coupled plasma (ICP) emission spectrometry
EN 14288 – A ; Fogging Properties (Reflectometric)
EN 14288 – B; Fogging Characteristics (Gravimetric)
EN 14621 ; Test Methods for Textured and Non-Textured Filament Yarns
EN 1464 ; peel resistance
EN 1465 ; Pull Round – Shear Strength
EN 14704 – 1 ; Determination of Elasticity Strip Test
EN 14971 ; Determining the Number of Stitches
EN 15104 ; Solid biofuels. Determination of total carbon, hydrogen and nitrogen content. instrumental methods.
EN 15598 ; Stack Cycle Tear Resistance
EN 15977 ; Determination of Elongation and Permanent Deformation
EN 1604 ; dimensional stability
EN 1773; Width and Length Determination
EN 1811 ; Nickel Release
EN 1876 – 1 ; Low Temperature Bending Test
EN 1936 ; True Density Determination
EN 20105 – A02; ISO 105 – A02 – Gray scale to evaluate change in color
EN 20105 – A03; ISO 105 – A03 – Gray scale for evaluating painting
EN 20105-A02 ; Color Fastness of Textiles
EN 201105-A2 ; Color Fastness Test of Textiles
EN 20811 ; Hydrostatic Pressure Test
EN 22313; Wrinkle Relief Detection
EN 23270; Paints, Varnishes and Raw Materials – Temperatures and Humidities for Conditioning and Testing
EN 24920 / ISO 4920; Determination of Surface Wetting Resistance (Spray Test)
EN 25077 ; Determination of Dimensional Change in Washing and Drying
EN 28510 – 1 ; Peel Test
EN 29073 – 1, (ISO 9073 – 1 1989 – 07); Determination of Mass Per Unit Area
EN 29073-3; Determination of Tensile Strength and Elongation
EN 29865 / ISO 9865; Bundesmann Rain - Shower Test
EN 310 ; Bending Properties
EN 31092; Determination of Thermal and Water-Steam Resistance
EN 317; Swelling in Thickness After Immersion in Water
EN 322 ; Determination of Moisture Content
EN 323; Density Determination
EN 3665 ; Filiform Corrosion Resistance Test
EN 367 ; Determination of Heat Conduction in Flame Exposure
EN 3745-511; Aviation - Fiber optic lines for aircraft; Test methods – Part 511: wear cable reduced
For EN 388. 6.4; Penetration Force
EN 420 Para. 6.5; Water Vapor Absorption
EN 430 ; Determination of Mass Per Unit Area
EN 438 - 2 Para. 11th; Abrasion Resistance
EN 60 (625 °C) ; Ignition Loss Determination
EN 60068 – 2 – 1, VDE 0468 – 2 – 1 ; cold storage
EN 60068 - 2 - 11; Salt Mist Test
EN 60068 – 2 – 14 ; Money. 7 - Testing Rapid Change of Temperature with Projected Transfer Time
EN 60068 - 2 - 2; VDE 0468 - 2 - 2 - Heat storage
EN 60068 – 2 – 30; Climate Cycle Test
EN 60068 - 2 - 52; IEC 68 - 2 - 52 - salt spray test
EN 60068 – 2 – 60; Flowing Mixed Gas Corrosion Test
EN 60068 - 2 - 70; IEC 68 - 2 - 70 - Wear resistance (Abrex)
EN 60068 – 2 – 78; IEC 60068 – 2 – 78 – Humid heat steady state
EN 60068-2-70 ; Environmental testing – Part 2: Testing – Test Xb: Evaluation of the resistance of labels and text to abrasion from finger and hand friction
EN 60112 / VDE 0303 - 11 (IEC 60112); Determination of Comparative and Evidence Tracking Indexes
EN 60156 VDE 0370 – 5 ; Breakdown Voltage Determination (Insulation Oil)
EN 60243-2; Electrical strength of insulating materials - Test methods - Part 2: Additional requirements for DC voltage testing
EN 60247 VDE 0380 ; Relative Permeability Measurement
EN 60352-2; Corrigendum 1 Solderless connections – Part 2: crimping – General requirements, test methods and practical guide
EN 60352-3; Solderless connections – Part 3: Solderless accessible insulation displacement connections; General requirements, test methods and practical guide
EN 60512- 1-1 ; Connectors for electronic equipment - Tests and measurements - Part 1-1: General studies; Inspection 1a: Visual inspection
EN 60512-1 ; Connectors for electronic equipment - Tests and measurements - Part 1: General
EN 60512-10-4; Connectors for electronic equipment - Tests and measurements - Part 10-4: Impact tests (free components), static load tests (fixed components), endurance test and overload tests - Test 10d: Electrical overload (connectors)
EN 60512-11-1 ; Electromechanical components for electronic equipment – Measurements and tests – Part 11: Climate tests; Part 1: Test 11a: Climate Impact
EN 60512-11-10 ; Connectors for electronic equipment - Tests and measurements - Part 11-11: Climate tests; Review 11k: vacuum
EN 60512-11-11 ; Connectors for electronic equipment - Tests and measurements - Part 11-11: Climate tests; Review 11k: vacuum
EN 60512-11-12 ; Connectors for electronic equipment - Tests and measurements - Part 11-12: Climate tests; Inspection 11m: Humid heat, cyclic
EN 60512-11-13 ; Connectors for electronic equipment - Tests and measurements - Part 11-13: Climate tests; Inspection 11n: Gas tightness, winding connections
EN 60512-11-2; Connectors for electronic equipment - Tests and measurements - Part 11-2: Climate tests; Review 11b: Combined review cooling, vacuum and wet heat
EN 60512-11-3 ; Connectors for electronic equipment - Tests and measurements - Part 11-3: Climate tests; Inspection 11c: Humid heat, constant
EN 60512-11-4 ; Connectors for electronic equipment - Tests and measurements - Part 11-4: Climate tests; Inspection 11d: Rapid temperature changes (two-chamber method)
EN 60512-11-6 ; Connectors for electronic equipment - Tests and measurements - Part 11-6: Climate tests;Test 11f: Corrosion, salt spray
EN 60512-11-9 ; Connectors for electronic equipment - Tests and measurements - Part 11-9: Climate tests; Inspection 11i: Dry heat
EN 60512-1-2; Connectors for electronic equipment - Tests and measurements - Part 1-2: General studies; Inspection 1b: Dimensions and weight testing
EN 60512-1-3; Electromechanical components for electronic equipment – Measurements and tests – Part 1: General studies; Chapter 3: Review of 1c: Conflicting contacts
EN 60512-13-1 ; Connectors for electronic equipment - Tests and measurements - part 13-1: Mechanical operational tests - test 13a: grip and release force
EN 60512-13-2; Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operating tests - review 13b: Gesamtsteck- and -ziehkraft
EN 60512-13-2; Corrigendum 1 Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operating tests - review 13b: Gesamtsteck- and -ziehkraft
EN 60512-13-5; Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operating tests - review 13e: polarization and coding
EN 60512-13-5; Corrigendum 1 Connectors for electronic equipment - Tests and measurements - part 13-5: Mechanical operating tests - review 13e: polarization and coding
EN 60512-14-4 ; Connectors for electronic equipment - Tests and measurements - part 14-4: checks tightness - Test 14d: Waterproof
EN 60512-14-5 ; Connectors for electronic equipment - Tests and measurements - part 14-5: checks tightness - Test 14e: Low pressure diving
EN 60512-14-6 ; Connectors for electronic equipment - Tests and measurements - part 14-6: checks for tightness - Test 14f: surface tightness
EN 60512-14-7 ; Electromechanical components for electronic equipment – Measurements and tests – Part 14: Tightness tests; Main Chapter 7: Test 14g: Leap
EN 60512-16-20; Electromechanical components for electronic equipment ultrasonic measurement and inspection test methods – Part 16: Mechanical tests on contacts and terminations; Main Section 20: Test 16t: tensile strength (wire connection with solderless connections)
EN 60512-19-3; Electromechanical components ultrasonic measurement and inspection test methods for electronic equipment – Part 19: Chemical resistance testing; Part 3: Inspection of 19c: resistance to liquids
EN 60512-2-1 ; Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical volume resistance tests; Inspection 2a: Contact resistance; millivolt method
EN 60512-2-2; Connectors for electronic equipment - Tests and measurements - part 2-2: test of electrical volume resistance - Test 2b: Contact resistance - with prescribed current
EN 60512-2-3; Connectors for electronic equipment - Tests and measurements - part 2-3: testing of electrical volume resistance; Inspection 2c: variation of volume resistance
EN 60512-2-5; Connectors for electronic equipment - Tests and measurements - part 2-5: test of electrical volume resistance - Test 2e: Contact failure
EN 60512-2-6; Connectors for electronic equipment - Tests and measurements - part 2-6: testing of electrical volume resistance; Inspection 2f: Contact resistance guard (protective)
EN 60512-3-1 ; Connectors for electronic equipment - Tests and measurements - Part 3-1: Insulation Tests; Inspection 3a: Insulation resistance
EN 60512-4-1 ; Connectors for electronic equipment - Tests and measurements - part 4-1: Tests with voltage stress - 4a test Dielectric strength
EN 60512-4-3; Connectors for electronic equipment - Tests and measurements - Part 4-3: Tests with tensile stress; Review 4c: Dielectric strength of pre-insulated crimped drums
EN 60512-5-1 ; Connectors for electronic equipment - Tests and measurements - part 5-1: testing available capacity; Test 5a: increase in temperature
EN 60512-5-2; Connectors for electronic equipment - Tests and measurements - Part 5-2: Tests of current capacity; Review 5b: current carrying capacity (derating curve)
EN 60512-6-1 ; Connectors for electronic equipment - Tests and measurements -part 6-1: Dynamic stress tests; Inspection 6a: Smooth acceleration, centrifugal
EN 60512-6-2; Connectors for electronic equipment - Tests and measurements - Part 6-2: By dynamic stress tests; Exam 6b: Multiplication
EN 60512-6-3 ; Connectors for electronic equipment - Tests and measurements - Part 6-3: By dynamic stress tests; Inspection 6c: Shock (single shock)
EN 60512-6-4 ; Connectors for electronic equipment - Tests and measurements - Part 6-4: By dynamic stress tests; Inspection 6d: Vibration (sinusoidal)
EN 60512-6-5; Electromechanical components for electronic equipment ultrasonic measurement and inspection procedures – Part 6: Dynamic stress inspection; Part 5: 6e test: Random vibration
EN 60512-9-3 ; Corrigendum 1 Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation with electric load (locking / disconnection) (test with resistive lamp load only)
EN 60695 – 2 – 11 ; VDE 0471 – 2 – 11 (IEC 60695 – 2 – 11) – Glow Wire Test
EN 60695 – 2 – 12; VDE 0471 – 2 – 12 (IEC 60695 – 2 – 12) – GWFI (Glow Wire Flammability Index)
EN 60695 – 2 – 13 ; VDE 0471 – 2 – 13 (IEC 60695 – 2 – 13) – GWIT (Glow Wire Ignition Temperature)
EN 60811-1-1; Insulator and sheath materials of electrical and optical cables - Common test methods - Part 1-1: General practice; Measurement of thickness and overall dimensions; Method of determining mechanical properties
EN 60811-1-2; Insulator and sheath materials of electrical and optical cables - Common test methods - Part 1: General practice; Part 2: Thermal aging
EN 60811-1-3; Insulator and sheath materials of electrical and optical cables - Common test methods - Part 1-3: General practice; Density determination, water absorption tests, Shrinkage test
EN 60811-1-4; Insulator and sheath materials of electrical and optical cables - Common test methods - Part 1-4: General practice; Low temperature tests
EN 60811-3-1; insulator and sheath materials of electrical and optical cables - Common test methods - Part 3-1: Methods specific to PVC compounds; pressure test, crack resistance test
EN 60811-3-2; Insulator and sheath materials of electrical and optical cables - Common test methods - Part 3-2: Methods specific to PVC compounds - Investigation of mass loss - Thermal stability test
EN 60811-4-1 ; Insulator and sheath materials of electrical and optical cables - Common test methods - Part 4-1: Methods specific to polyethylene and polypropylene compounds - Stress cracking - Measurement of melt flow index - Carbon black and/or mineral filler by direct combustion in polyethylene - Thermogravimetric analysis (TGA) measurement of the carbon black content with – evaluation of the carbon black distribution in polyethylene using a microscope
EN 60811-4-2; Insulator and sheath materials of electrical and optical cables - Common test methods - Part 4-2: Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after high temperature conditioning - Winding test after high temperature conditioning - Thermal aging in air after winding test - mass measurement of aging – long-term (lifetime) test – Test method for copper-oxygen aging effect
EN 62321/VDE 0042 – 1 (closed container/microwave); Determination of Total Content of Selected Elements by Atomic Emission Spectrometer (Icp – Oes)
EN 62321/VDE 0042 – 1 Annex A; Determination of polybrominated biphenyls/polybrominated diphenyl ethers in polymers by GC – MS
EN 62321 / VDE 0042 - 1 Annex C; Determination of Chromium (Vi)
EN 62321/VDE 0042 – 1 part 7 ; (Closed Container/Microwave) – Determination of Mercury in Polymer Metals and Electronics
EN 660 – 1 ; Abrasion Resistance (Stuttgart Test)
EN 71-2; flammability
EN 71-3; Migration of Some Elements
EN 71 – 11 Para. 5.8 ; Determination of Phosphate
EN 717 – 1 ; Formaldehyde Emission by Chamber Method
EN 717-2; Formaldehyde Release by Gas Analysis Method
EN 717-3; Determination of Formaldehyde by Acetylacetone Method – Photometrische Bestimmung Analog
EN 827 ; Determination of Conventional Solids Content and Constant Mass Solids Content
EN 863; Puncture resistance
EN 903 (H24) ; Determination of Anionic Surfactants
EN 933 – 1 ; Determination of Particle Size Distribution
EN 933 – 4 ; Determination of Particle Shape – Shape Index
EN 933 – 5 ; Determination of Percentage of Crushed and Broken Surfaces in Coarse Aggregate Particles
EN 986 ; Dimensional Change