Laboratories that comply with NRTL standards provide increased confidence and quality assurance that your products meet North American electrical safety requirements for market acceptance. OSHA standards include requirements for NRTL product testing and certification for 39 product types to be tested and certified by a third-party organization called Nationally Recognized Test Laboratories (NRTL).
In 1988, the Occupational Safety and Health Administration (OSHA) created the NRTL program, which defines the set of criteria by which a laboratory can prove worthy of providing assessment, testing and certification of electrical products.
Nationally Recognized Test Laboratories have been recognized by OSHA to meet the legal requirements to perform safety testing and certification of products covered using consensus-based testing standards at 29 CFR 1910.7.
The National Recognized Testing Laboratory (NRTL) is an independent third division laboratory recognized by the United States Occupational Health and Safety Administration (OSHA) to test and certify products to applicable product safety standards.
OSHA requires that various products, devices, assemblies or systems used in the workplace be tested and certified by a third-party organization called National Recognized Test Laboratories (NRTL). Nationally Recognized Test Laboratories have been recognized by OSHA to meet the legal requirements to perform safety testing and certification of products covered using consensus-based testing standards at 29 CFR 1910.7.
OSHA determines which product standards to be used with regard to employee safety. OSHA standards include requirements for NRTL product testing and certification for 39 product types. OSHA requires NRTL approval for many types of electrical equipment when used in the workplace.
Test standards determined to be suitable for use under OSHA's NRTL Program include ANSI, IEEE, NEMA, CSA and UL standards. The need for UL approvals for product safety compliance is actually a common misunderstanding in the industry. While coordinating the UL standard writing, it is just one of several NRTLs for testing and certification.
EUROLAB is the global service leader for product safety approvals and regulatory certification of electrical products - With 60 years of experience to certify your facilities, accreditations, and market your products faster. EUROLAB currently has OSHA approval to test and certify more than 200 product standard categories.
The current standards are explained in the table below.
Programs: |
2. Acceptance of test data from independent organizations other than NRTLs. |
3. Acceptance of product evaluations from independent organizations other than NRTLs. |
4. Acceptance of witness test data. |
5. Acceptance of test data from non-independent organizations. |
6. Acceptance of evaluation data from non-independent organizations (requires NRTL review prior to marketing). |
7. Continuous acceptance of the certificate after minor changes made by the client. |
8. Acceptance of product evaluations from organizations acting as part of the International Electrotechnical Commission Certification Body (IEC-CB) Program. |
9. Acceptance of services other than testing or evaluation performed by subcontractors or agents. |
Product Standards: | ||
ANSI A17.5 | Elevator and Escalator Electrical Equipment | |
ANSI C12.1 | Electricity Meters Code | |
ANSI/IEEE C57.13 | Terminology and Test Code for Instrument Transformers | |
ANSI / UL 5 | Surface Metal Ducts and Fittings | |
UL 5A | Non-Metal Surface Rails and Fittings | |
ANSI/ISA 12.12.01 | Non-Hazardous Electrical Equipment for Class I and II, Division 2 and Class III, Division I and 2 | |
ANSI / UL 22 | Electric Amusement Machines | |
UL 45 | Portable Power Tools | |
UL 48 | Electrical Signs | |
ANSI/AAMI ES60601-1:2005/(R)2012 | Medical electrical equipment, Part 1: General requirements for basic safety and basic performance (with changes) | |
ASME A17.5 | Elevator and Escalator Electrical Equipment | |
IEEE C57.13 | Terminology and Test Code for Instrument Transformers | |
ISA12.12.01 | Ineffective Electrical Equipment for Use in Class I and II, Division 2 and Class III, Division 1 and 2 Hazardous (Classified) Locations | |
NEMA C12.1 | Electricity Meters Code | |
UL 5 | Surface Metal Ducts and Fittings | |
UL 5A | Non-Metal Surface Rails and Fittings | |
UL 22 | Electric Amusement Machines | |
UL 48 | Electrical Signs | |
UL 50 | Enclosures for Electrical Equipment | |
UL 50E | Enclosures for Electrical Equipment, Environmental Considerations | |
UL 65 | Electric Cable Cabinets | |
UL 73 | Electric Motor Tools | |
UL 82 | Electric Garden Tools | |
UL 122 | Electrical Photography Equipment | |
UL 130 | Electric Heating Pads | |
UL 153 | Portable Electric Lamps | |
UL 183 | Cabling Systems Produced | |
UL 197 | Commercial Electric Cooking Appliances | |
UL 201 | Garage Equipments | |
UL 231 | Electrical Sockets | |
UL 234 | Low Voltage Lighting Fixtures Used in Recreational Vehicles | |
UL 244A | Solid State Controls for Devices | |
UL 250 | Household Refrigerators and Freezers | |
UL 291 | Automatic Teller Systems | |
UL 294 | Access Control System Units | |
UL 325 | Door, Curtain, Door, Shutter and Window Operators and Systems | |
UL 355 | Cord Reels | |
UL 399 | Drinking Water Coolers | |
UL 412 | Cooling Unit Coolers | |
UL 416 | Refrigerated Medical Devices | |
UL 427 | Cooling Units | |
UL 430 | Waste Disposal Devices | |
UL 458 | Power Converters / Inverters and Power Converter / Inverter Systems for Land Vehicles and Marine Vehicles | |
UL 466 | Electric Scales | |
UL 469 | Musical Instruments and Accessories | |
UL 471 | Commercial Refrigerators and Freezers | |
UL 474 | Dehumidifiers | |
UL 482 | Portable Solar / Heat Lamps | |
UL 484 | Room Air Conditioners | |
UL 498A | Stream Bands and Adapters | |
UL 499 | Electric Heating Appliances | |
UL 506 | Special Transformers | |
UL 507 | Electric Fans | |
UL 508 | Electrical Industrial Control Equipment | |
UL 508A | Industrial Control Panels | |
UL 508C | Power Conversion Equipment | |
UL 514A | Metallic Outlet Boxes, Electrical | |
UL 541 | Refrigerated Vending Machines | |
UL 561 | Soil Treatment Machines | |
UL 563 | Ice Machines | |
UL 588 | Seasonal and Holiday Decorative Products | |
UL 664 | Commercial Dry Cleaning Machines (Type IV) | |
UL 676 | Underwater Lighting Fixtures | |
UL 705 | Power Ventilators | |
UL 745-1 | Portable Power Tools | |
UL 745-2-1 | Special Requirements of Drills | |
UL 745-2-3 | Special Requirements for Grinders, Polishers and Disc Sanders | |
UL 745-2-5 | Special Requirements for Circular Saws and Circular Blades | |
UL 745-2-14 | Special Requirements for Planers | |
UL 745-2-17 | Special Requirements for Routers and Trimmers | |
UL 745-2-31 | Special Requirements for Diamond Drills | |
UL 745-2-32 | Special Requirements for Magnetic Drill Presses | |
UL 745-2-35 | Special Requirements for Drain Cleaners | |
UL 745-2-36 | Special Requirements for Hand Powered Vehicles | |
UL 745-2-37 | Special Requirements for Plate Fasteners | |
UL 749 | Household Dishwashers | |
UL 751 | Vending Machines | |
UL 756 | Coin and Currency Changers and Actuators | |
UL 763 | Motorized Commercial Food Preparation Machines | |
UL 775 | Graphic Arts Equipment | |
UL 778 | Motor Water Pumps | |
UL 813 | Commercial Audio Equipment | |
UL 826 | Household Electric Clocks | |
UL 858 | Electrical Appliances | |
UL 867 | Electrostatic Air Purifiers | |
UL 859 | Personal Care Appliances | |
UL 869A | Standard for Service Equipment | |
UL 913 | Class I, II and III, Division 1, Intrinsically Safe Device and Associated Device for Use in Hazardous Locations | |
UL 916 | Energy Management Equipment | |
UL 917 | Clock-Operated Switches | |
UL 923 | Microwave Cooking Appliances | |
UL 924 | Emergency Lighting and Power Equipment | |
UL 935 | Fluorescent Lamp Ballasts | |
UL 961 | Electric Hobby and Sports Equipment | |
UL 963 | Sealing, Packaging and Marking Equipment | |
UL 982 | Motorized Home Food Preparation Machines | |
UL 987 | Fixed and Fixed Electric Tools | |
UL 998 | Humidifiers | |
UL 1008 | Transfer switch | |
UL 1012 | Power Supplies | |
UL 1017 | Vacuum Cleaning Machines and Blower Cleaners | |
UL 1018 | Electric Aquarium Equipment | |
UL 1026 | Electrical Home Cooking and Food Service Equipment | |
UL 1028 | Hair Clippers & Shavers | |
UL 1042 | Vacuum Skirting Heating Equipment | |
UL 1054 | Special Use Keys | |
UL 1069 | Hospital Signaling and Nurse Call System | |
UL 1081 | Swimming Pool Pumps, Filters and Chlorinators | |
UL 1082 | Electrical Home Coffee Machines and Beer Type Appliances | |
UL 1083 | Electrical Household Pans and Fryers | |
UL 1086 | Household Garbage Compactors | |
UL 1090 | Electric Snow Movers | |
UL 1203 | Explosion-Proof and Dust-Free Electrical Equipment for Use in Hazardous (Classified) Locations | |
UL 1230 | Amateur Movie Lights | |
UL 1236 | Battery Chargers for Recharging Engine Starter Batteries | |
UL 1244 | Electrical and Electronic Measuring and Testing Equipment | |
UL 1248 | Engine-Generator Groups Used in Recreational Vehicles | |
UL 1261 | Electric Water Heaters for Pools and Bathtubs | |
UL 1278 | Movable and Wall or Ceiling Type Electric Room Heaters | |
UL 1310 | Direct Plug Transformer Units | |
UL 1363 | Replaceable Power Taps | |
UL 1419 | Professional Video and Audio Equipment | |
UL 1431 | Personal Hygiene and Sanitary Items | |
UL 1447 | Electric Lawn Mowers | |
UL 1448 | Electric Hedge Trimmers | |
UL 1449 | Transient Voltage Surge Suppressors | |
UL 1450 | Engine Operated Air Compressors, Vacuum Pumps and Painting Equipment | |
UL 1492 | Audio-Video Products and Accessories | |
UL 1559 | Insect Control Equipment - Electric Shock Type | |
UL 1563 | Electric Spas, Equipment Assemblies and Associated Equipment | |
UL 1564 | Industrial Battery Chargers | |
UL 1573 | Stage and Studio Lighting Units | |
UL 1574 | Rail Lighting Systems | |
UL 1594 | Sewing and Cutting Machines | |
UL 1598 | Armature | |
UL 1638 | Visual Signal Instruments - Special Mode Emergency and General Utility Signals | |
UL 1640 | Portable Power Distribution Equipment | |
UL 1647 | Motorized Massage and Exercise Machines | |
UL 1662 | Electric Saws | |
UL 1727 | Commercial Electric Personal Care Appliances | |
UL 1740 | Industrial Robots and Robotic Equipment | |
UL 1741 | Inverters, Converters, Controllers and Interconnection System Equipment for Use with Distributed Energy Sources | |
UL 1776 | High Pressure Cleaning Machines | |
UL 1778 | Uninterruptible Power Supply Equipment | |
UL 1786 | Night lights | |
UL 1795 | Hydromassage Tubs | |
UL 1838 | Low Voltage Landscape Lighting Systems | |
UL 1863 | Communication Circuit Accessories | |
UL 1951 | Electric Plumbing Accessories | |
UL 1993 | Self-Ballasted Lamps and Lamp Adapters | |
UL 1994 | Bright Way Out Marking Systems | |
UL 1995 | Heating and Cooling Equipment | |
UL 1996 | Electric Duct Heaters | |
UL 2021 | Fixed and Floor Dedicated Electric Room Heaters | |
UL 2044 | Commercial Closed Circuit Television Equipment | |
UL 2089 | Vehicle Battery Adapters | |
UL 2108 | Standard for Low Voltage Lighting Systems | |
UL 2157 | Electrical Washing Machines and Aspirators | |
UL 2158 | Electric Clothes Dryers | |
UL 2161 | Neon Transformers and Power Supplies | |
UL 2202 | Electric Vehicle (EV) Charging System Equipment | |
UL 2594 | Standard for Electric Vehicle Supply Equipment | |
UL 2735 | Standard for Electric Utility Meters | |
UL 2738 | Standard for Induction Power Transmitters and Receivers Used with Low Energy Products | |
UL 5085-1 | Low Voltage Transformers - Part 1: General Requirements | |
UL 5085-3 | Low Voltage Transformers - Part 3: Class 2 and Class 3 Transformers | |
UL 6500 | Audio / Visual and Musical Instrument Apparatus for Household, Commercial and Similar General Use | |
UL 8750 | Light Emitting Diode (LED) Standard for Use in Lighting Products | |
UL 8752 | Organic Light Emitting Diode (LED) Panels | |
UL 60065 | Audio, Video and Similar Electronic Devices | |
UL 60079-0 | Explosive Atmospheres - Part 0: Equipment - General Requirements | |
UL 60079-1 | Standard for Explosive Atmospheres - Part 1: Equipment Protection with Flameproof Enclosures “d” | |
UL 60079-2 | Explosive Atmospheres - Part 2: Equipment Protection with Pressurized Enclosure "p" | |
UL 60079-11 | Explosive Atmospheres - Part 11: Equipment Protection with Internal Safety "i" | |
UL 60079-15 | Explosive Atmospheres - Part 15: Equipment Protection by Protection Type "n" | |
UL 60335-1 | Safety of Electrical Appliances and Similar Appliances, Part 1; General Requirements | |
UL 60335-2-3 | Electrical Appliances and Similar Appliances, Part 2: Particular Requirements for Electric Irons | |
UL 60335-2-8 | Electrical Appliances and Similar Electrical Appliances, Part 2: Special Requirements for Shavers, Hair Clippers and Similar Appliances | |
UL 60335-2-34 | Electrical Appliances and Similar Appliances, Part 2; Special Requirements for Engine Compressors | |
UL 60335-2-40 | Appliances and Similar Appliances - Safety - Part 2-40: Particular Requirements for Electric Heat Pumps, Air Conditioners and Dehumidifiers | |
UL 60601-1 | Medical Electrical Equipment, Part 1: General Requirements for Safety | |
UL 60745-1 | Manual Power Tools - Safety - Part 1: General | |
UL 60745-2-2 | Hand-Held Motor Power Tools-Safety-Part 2-2: Special Requirements for Screwdrivers and Impact Wrenches | |
UL 60745-2-4 | Hand-Powered Power Tools - Safety - Part 2-4: Special Requirements for Non-Disc Abrasives and Polishers | |
UL 60745-2-6 | Hand Motor Power Tools - Safety - Part 2-6: Special Requirements for Hammers | |
UL 60745-2-8 | Manual Powered Power Tools - Safety - Part 2-8: Special Requirements for Shears and Cutters | |
UL 60745-2-9 | Hand Motor Power Tools - Safety - Part 2-9: Special Requirements for Tappers | |
UL 60745-2-11 | Hand Powered Power Tools - Safety - Part 2-11: Special Requirements for Reciprocating Saws | |
UL 60745-2-12 | Manual Powered Power Tools - Safety - Part 2-12: Particular Requirements for Concrete Vibrators | |
UL 60745-2-15 | Hand Powered Power Tools - Safety - Part 2-15: Special Requirements for Hedge Trimmers | |
UL 60745-2-16 | Hand-Held Power Tools - Safety - Part 2-16: Special Requirements for Flooring Machines | |
UL 60745-2-18 | Hand-Powered Power Tools - Safety - Part 2-18: Special Requirements for Strapping Tools | |
UL 60745-2-20 | Hand-Powered Power Tools - Safety - Part 2-20: Special Requirements for Bandsaws | |
UL 60947-1 | Standard for Low Voltage Panels and Control Devices - Part 1: General Rules | |
UL 60947-4-1 | Standard for Safety Low Voltage Switchgear and Control Devices - Part 4-1: Contactors and Motor Starters - Electromechanical Contactors and Motor Starters | |
UL 60950 | Information Technology Equipment | |
UL 61010-2-51 * | Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-051: Particular Requirements for Mixing and Mixing Laboratory Equipment | |
UL 61010-2-81 | Standard for Safety Requirements of Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-081: Special Requirements for Automated and Semi-Automated Laboratory Equipment for Analysis and Other Purposes | |
UL 61010-2-91 | Standard for Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-091: Special Requirements for Cabinet X-Ray Systems | |
UL 61010-2-101 * | Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-101: Special Requirements for In Vitro Diagnostic (IVD) Medical Devices | |
UL 61010A-1 | Electrical Equipment for Laboratory Use; Part 1: General Requirements | |
UL 61010B-1 | Electrical Measuring and Testing Devices; Part 1: General Requirements | |
UL 61010C-1 | Process Control Equipment | |
UL 61800-5-1 | Standard for Adjustable Speed Electric Power Drive Systems - Part 5-1: Safety Requirements - Electrical, Thermal and Energy | |
UL 62368-1 | Audio / Video, Information and Communication Technology Equipment - Part 1: Security Requirements | |
Recognition Limitations / Limitations: | ||
Note: * Testing and certification of products under this testing standard is limited to Class I locations. Blast testing is also limited to current test room capabilities. |
EUROLAB, with its highly specialized team and international accredited laboratories, NRTL Standards It performs all test, analysis, measurement, evaluation and report generation services completely and reliably.