Asia Pacific Electrical Tests

EUROLABoffers the following services within the scope of Asia Pacific electrical tests.

AUSTRALIA AND NEW ZEALAND RCM BRAND

As of March 1, 2013, the RCM mark will be the only mark to show compliance with the Australian Communications and Media Authority (ACMA) regulations for telecommunications, radio, EMC and electromagnetic energy (EME).

From March 1, 2013, all new devices that are physically tagged will need to be tagged with RCM. The use of C-Tick and A-Tick marks on all older products will be retired until March 1, 2016.

EUROLABis accredited by A2LA or NVLAP for Australia and New Zealand to test the following standards:

A2LA

• 0.591,01
• 0.591,02
• 0.591,03
• 0.591,04
• 0.591,05
• 0.591,06

NVLAP

• 200445-0
• 600134-0
• AS / NZS CISPR 15 Limits and methods of measuring radio interference characteristics of electrical lighting and similar devices
• AS / NZS CISPR 22 (2004): Information technology equipment - Radio interference characteristics - Limits and methods of measurement
• AS / NZS CISPR 22, 3rd Edition (2006): Information technology equipment - Radio interference characteristics - Limits and methods of measurement
• AS / NZS 1044 The limits and methods of measuring the radio interference characteristics of electrical motor and thermal devices for household and similar electrical appliances and similar electrical devices
• AS / NZS 2279.1 (2000): EMC Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A)
• AS / NZS 2279.3 (2001): EMC Part 3-3: Limits - In general low-voltage supply systems, voltage changes, voltage fluctuations and vibration limitations for devices with a rated current of <= 16 A per phase and not subject to conditional connections
• AS / NZS 4268 Radio devices and systems - Short range devices - Limits and measurement methods
• Telecommunications requirements for AS / NZS 4281 cordless phones operating in 1,7 MHz and 30 to 41 MHz frequency bands
• AS / NZS 4295 Analog speech (angle-modulated) equipment operating in the frequency range 29,7 MHz to 1 GHz in land mobile and fixed service bands
• AS / NZS 4355 Handset operating at frequencies not exceeding 30 MHz and telecommunications devices used in the citizen band
• Telecommunications equipment used in AS / NZS 4365 UHF citizen band radio service
• Specifications and test conditions of data transmission equipment operating in AS / NZS 4771 900 MHz, 2,4 GHz and 5,8 GHz bands and using spread spectrum modulation techniques
• AS / NZS 60950 Information Technology Equipment
• AS / NZS 60950-1 Information Technology Equipment General Requirements

EUROLAB also performs telecom testing to PTC 200, PTC 220, TNA 134 (ISDN) for New Zealand and the following standards for Australia:

• AS/ACIF S002
• AS/ACIF S003
• AS/ACIF S016
• AS/ACIF S041.1
• AS/ACIF S041.2
• AS/ACIF S043.1
• AS/ACIF S043.2
• AS/CA S002
• AS/CA S003.1
• AS/CA S003.2
• AS/CA S003.3

CHINA CCC MARK AND TAIWAN BSMI MARK

Asia is an important and growing market for our customers. For manufacturers who want to access the Chinese or Taiwanese market EUROLABcan assist with safety and EMC testing for the BSMI mark (Taiwan) or safety and EMC testing for the CCC mark (China).

For Asian manufacturers looking to access the North American market EUROLAB The China office provides product safety evaluation and testing services.

Headquartered in Shenzhen, China, our product safety engineers evaluate production facilities and team with local partner testing laboratories for product safety testing. Compatibility is required to access the North American market and EUROLAB The mark is a growing alternative to UL. 

EUROLABRecognized Testing Agency (RTA) status with Hong Kong OFTA (Telecommunications Authority). Our locations in Maryland and California are certified to perform evaluation testing of analog (HKTA 2011) and digital (HKTA 2017) wireline equipment to HKTA specifications under the Hong Kong Telecommunications Equipment Evaluation and Certification (HKTEC) Program.

EUROLAB It also carries out telecom testing to ADSL01 and PSTN01 for Taiwan and analog testing to YD/T 514-1998 for China.

INDIA ELECTRIC TEST FOR HEAT MARK

EUROLABcan help manufacturers selling in India to obtain ISI mark or CB Scheme certification.

Mandatory Security: Yes
Mandatory EMC / TEL: Yes

EUROLAB performs telecom testing to IR/FAX-01 & S/INT-2 W/02 (Analog) for India.

Not all product categories are regulated in India.

JAPAN VCCI BRAND

EUROLAB, can help Japanese companies access the North American market and North American companies access the Japanese market.

For electronics manufacturers who want to enter the Japanese market EUROLABcan help in achieving the VCCI Mark for EMC. Our facilities are registered in accordance with the Rules provided by the Voluntary Control Measures Control Council for Interaction with Information Technology Equipment (VCCI) for testing Information Technology Equipment according to the Technical Requirements under V-3/2011.04.

For Japanese telecom approvals EUROLAB, JATE performs 1.5M, 2M and Analog tests.

For product safety certification EUROLAB, to conduct safety certification testing for the US and Canadian market EUROLAB It cooperates with COSMOS, a Japanese accredited Authorized Evaluation Organization approved by.

COSMOS will also perform the necessary factory follow-up audits in Japan.

KOREA KC MARK

Under phase I of APEC TEL MRA, EUROLAB is a well-known CAB - a foreign laboratory that performs EMC KC testing for the Korean market. Korea Radio Research Laboratory (RRL) EUROLAB will accept tests and reports and issue certificates to customers who submit our test reports.

EUROLAB has signed a Memorandum of Understanding with the following Korean laboratories:

• Korea Test and Research Institute (KTR)
• EMC Research Institute (ERI)
• Korea Electrical Test Institute
• Korea Test Laboratory (KTL)

North America based customers EUROLAB By working with , they can access the market in Korea. These partnerships will allow manufacturers to reduce certification costs while improving time to market.

RUSSIA GOST R & CU TR

In February 2013, the national Russian certification system GOST R and the national Russian technical "Safety of Machinery Equipment" regulation were withdrawn.

At the same time, the new Customs Union Technical Regulation (CU TR) for most electrical products entered into force in Russia, Belarus and Kazakhstan.

The previously issued GOST R certificates will be valid until March 15, 2015. After that, the new EAC mark must be used.

The Joint Production Mark will be used for marking products in the Customs Union (CU) and the Eurasian Economic Community (EAEC or EurAsEC). The Customs Union consists of Russia, Kazakhstan and Belarus. Among the EAEC countries are the CU countries, as well as Kyrgyzstan and Tajikistan. This mark is similar to the CE mark for product safety of the European Union.

Note: There are some changes in CU TR for mass-produced product manufacturers.

Here are some of the most important changes:

• The certificate applicant must have a formal relationship (contract) with a Russian representative legal entity. With GOST, this was not required.
• Mandatory factory audits are carried out by a Russian certification body. With GOST, a test lab can do this.

EUROLAB , can work in partnership with the Russian DIAMOND Group for market access to Russia and CIS countries. DIAMOND is a Russian accredited Authorized Assessment Body and can provide product certification services for any North American company planning to enter the Russian Federation (RF) market.

SINGAPORE ELECTRICAL TESTS

EUROLABcan help manufacturers selling in Singapore obtain the PSB mark or CB Scheme certification.

Mandatory Security: Yes
Mandatory EMC / TEL: Yes TEL only

EUROLAB provides telecom testing to IDA TS ADSL and IDA TS PSTN for Singapore. Not all product categories are regulated in Singapore.

VIETNAM ELECTRICAL TEST

EUROLABis one of only five laboratories recognized by Vietnam as part of the MRA relationship with NIST. Our EMC test reports can be used to verify compliance with applicable Vietnam TNC standards.

EUROLABcan help manufacturers selling in Vietnam obtain the Vietnam quality mark or Ministry of Information and Communications approvals.

Mandatory Security: Yes
Mandatory EMC / TEL: Yes

Not all product categories comply with the legislation in Vietnam.

EUROLAB, with its highly expert team and internationally accredited laboratories, Asia Pacific Electrical Tests It performs all test, analysis, measurement, evaluation and report generation services completely and reliably.