Hazardous Location Testing and Certification Capabilities

EUROLABoffers industry-leading experience and expertise to ensure your equipment is approved for use in hazardous locations.

With years of hazardous location safety expertise, we evaluate your equipment for potentially explosive or gaseous areas, helping you to make sure your equipment meets applicable safety standards approved for use in hazardous locations.

Our USA Testing and Certification Capabilities 

• NFPA 496 Evacuation and Pressure Housings for Electrical Equipment
• UL698 Industrial Control Equipment for Use in Hazardous (Classified) Locations
• UL913 Intrinsically Safe Device and Associated Device for Use in Class I, II and III, Division I, Hazardous (Classified) Locations
• UL1203 Explosion Proof and Dust Fireproof Electrical Equipment for Use in Hazardous (Classified) Locations-Third Edition
• ANSI / ISA 12.12.01 Class I and II, Division 2 and Class III, Division I and 2 Ineffective Electrical Equipment for Hazardous Use
• UL60079-0 Electrical Equipment for Explosive Gas Atmospheres Part 0: General Requirements
• UL60079-1 Electrical Equipment for Explosive Gas Atmospheres Part 1: Flameproof Enclosures "d"
• UL60079-11 Electrical Equipment for Explosive Gas Atmospheres Section 11: Internal Safety "i"
• UL60079-15 Electrical Equipment for Explosive Gas Atmospheres Part 15: "n" Protected Electrical Equipment

Our Canadian Testing and Certification Capabilities

• ICES 003 Digital Apparatus
• Electrical Characteristics of CSA C22.2 No 3 Fuel Burning Equipment
• CSA C22.2 No 25 Class II Groups E, F and G Enclosures for Use in Hazardous Locations
• CSA C22.2 No 30 Class I Explosion Proof Enclosures for Use in Hazardous Locations Industrial Products
• CSA C22.2 No 157 Intrinsically Safe and Non-Boost Equipment for Use in Hazardous Locations; Consumer and Commercial Products
• Non-Incendive Electrical Equipment for Use in CSA C22.2 No 213 Class I, Division 2 Hazardous Locations Industrial Products
• CSA E60079-0 Electrical Equipment for Explosive Gas Atmospheres Part 0: General Requirements
• CSA E60079-1 Electrical Appliances for Explosive Gas Atmospheres Part 1: Flameproof Enclosures “d”
• CSA E60079-2 Electrical Equipment for Explosive Gas Atmospheres Part 2: Pressure Housings “p” -Second Edition
• CSA E60079-7 Electrical Appliance for Explosive Gas Atmospheres Part 7: Increased Safety "e" -First Edition
• CSA E60079-11 Electrical Appliance for Explosive Gas Atmospheres Part 11: Internal Safety "i"
• CSA E60079-15 Electrical Appliance for Explosive Gas Atmospheres Section 15: Electrical Apparatus with “n” Protection

Our ATEX / IECEx Test and Certificate Abilities 

• EN / IEC 60079-0 Electrical Equipment for Explosive Gas Atmospheres Part 0: General Requirements
• EN / IEC 60079-1 Electrical Equipment for Explosive Gas Atmospheres Part 1: Flameproof Enclosures "d"
• EN / IEC 60079-2 Electrical Equipment for Explosive Gas Atmospheres Part 2: Pressurized Enclosures “p” -Second Edition
• EN / IEC 60079-7 Electrical Equipment for Explosive Gas Atmospheres Part 7: Increased Safety "e" -First Edition
• EN / IEC 60079-11 Electrical Appliance for Explosive Gas Atmospheres Part 11: Internal Safety "i"
• EN / IEC 60079-15 Electrical Equipment for Explosive Gas Atmospheres Part 15: "n" Protected Electrical Equipment
• EN / IEC 60079-28 Electrical Equipment for Explosive Gases Part 28: Protection of Equipment and Transmission Systems Using Optical Radiation
• EN / IEC 60079-31 Electrical Apparatus for Explosive Gas Atmospheres Part 31: Equipment Dust Ignition Protection with “t” Enclosure
• EN / IEC 61000-1 Electromagnetic Compatibility, Equipment for Electromagnetic Events
• EN / IEC 61000-2 Electromagnetic Compatibility, Compliance Levels for Low-Frequency Conducted Disturbances
• EN / IEC 61000-3 Electromagnetic Compatibility, Limits for Harmonic Current Emissions
• EN / IEC 61000-4 Electromagnetic compatibility, Immunity to Conducted Disturbances Caused by Radio Frequency Fields
• EN / IEC 61000-6 Electromagnetic Compatibility, Immunity in Residential, Commercial and Light Industrial Environments
• EN / IEC 61326-1 Electrical Equipment for Measurement, Control and Laboratory Use

EUROLAB, with its highly expert team and internationally accredited laboratories, Hazardous Location Testing and Certification Capabilities It performs all test, analysis, measurement, evaluation and report generation services completely and reliably.