Radiographic Testing of Materials

EUROLABperforms Radiographic Testing (RT) of materials to detect defects in base materials, welds and materials in heat affected zones (HAZ) or potentially hazardous equipment, construction and pipelines.

Benefits of Radiographic Testing

• Globally accepted volumetric test method showing the result in an image
• Method of detecting surface and volumetric defects and indications
• All kinds of materials can be controlled
• Product quality can be evaluated using a more complete data set
• Compare data from previous controls using range controls

About Radiographic Testing

Radiographic testing (RT) of materials is a non-destructive testing method that examines the entire volume of a sample. X-rays or gamma rays are used to create a radiograph that shows changes in thickness in the sample or detects defects (in surface or volume). X-rays are produced by an X-ray tube and gamma rays by an isotope.

EUROLAB, quality control during manufacturing and welding and inspection of components, castings, etc. Performs radiographic testing of materials for their volumetric inspection. Moreover EUROLABUses radiographic test vessel examinations of plate and/or tubes to detect defects in welding and corrosion. as obstruction.

Detectable defects include cracks, slag, pores and porosity, inclusions, and lack of fusion. EUROLABhas various isotope sources and x-ray machines located in different countries such as:

• Se75 isotope for 5 to 20 mm steel
• Ir10 isotope for 50 to 192 mm steel
• Co25 isotope for 200 to 60 mm steel
• X-rays for various thicknesses for steel

EUROLAB's radiographic testing experts are certified according to ISO 9712 and we meet the following testing standards: GOST 7512-82, ISO 17636-1: 2013, LISO 17636-2: 2013, PNAE G-7-017-89.

EUROLAB, with its highly expert team and internationally accredited laboratories, Radiographic Testing of Materials It performs all test, analysis, measurement, evaluation and report generation services completely and reliably.