An assay is a research (analytical) procedure for qualitatively assessing or quantitatively measuring the presence, quantity or functional activity of a target asset (analyte).
EUROLABPerforms experimental analysis on APIs and Finished Products using techniques such as HLPC, GC, Titrations, UV, IR, AA.
The experiment is done with the most suitable technique for the test item. The concentration of the active ingredient, called test, is expressed in four commonly used terms.
As it is foundation
The statement indicates that the product is analyzed as received. The sample is analyzed directly without drying. For example, if 100 milligrams of material is found to contain 98% API, then the test is reported as 98%.
Dried Foundation
The sample taken is ground into a fine powder and dried before being weighed to prepare the sample solution. This is accomplished by heating to 105 ° C to 120 ° C for the specified time and drying to constant weight in a desiccator. Heat sensitive materials can be dried in a vacuum on a dryer. Removed water is water that is absorbed from the environment and is not chemically bound to the material. Drying in the oven does not necessarily remove bound water or hydration water.
Anhydrous Base
The anhydrous base implies that there was no water in the material before analysis. This means that the sample has no absorbed water or bound water like hydrates.
The sample is weighed as it was obtained and the residual moisture content, if any, is measured independently by methods such as Karl Fischer titration. During the calculation of the test value, the water content is subtracted from the sample weight.
EUROLAB, with its highly expert team and internationally accredited laboratories, Drug Experiment Analysis It performs all test, analysis, measurement, evaluation and report generation services completely and reliably.
To get an appointment, to get more detailed information or to request an evaluation, you can ask us to fill in our form and reach you.
