Compression (compression) tests are used to determine material behavior under a load. These tests determine the maximum stress that a material can withstand over a period of time under a constant or gradual load. The compression test is usually performed up to a break (break) or a limit.
Materials used for structural purposes are generally expected to resist basic stresses such as compression, tensile and shear. Compression (compression) is a force that brings particles of a material closer together. For example, when a column supports a load, it is under pressure. The opposite is tensile force, which tends to stretch a material.
All materials can, to a certain extent, withstand compressive forces before breaking, at which point the compressive strength is measured. Therefore, the compressive strength of a material is often expressed as the maximum compression the material can withstand before breaking.
Some materials are better than others in compressive strength before failure occurs. Steel can withstand relatively high compression forces. Other materials such as concrete and ceramic typically show much higher compressive strengths than tensile strengths. Depending on the material, there may be fracture, rupture at the compressive strength limit, or irreversible deformation.
In short, compression testing is a very common testing method applied to determine the compressive strength or crushing resistance of a material and its ability to return to its original state after a certain compressive force is applied and even held for a certain period of time. Compression tests are used to determine the behavior of a material under a load.
In general, compression test results are: load at break, deflection at break, maximum load, deflection at maximum load, operating at maximum load, stiffness, beam pitch, offset efficiency, and stress.
In the construction industry, compressive strength is defined as the capacity of concrete to withstand loads before breaking. The most important of the many tests applied to concrete is the compressive strength test, because these test results give an idea about the properties of the concrete. In general, these tests are carried out according to the EN 1015-11 standard (EN 1015-11 Test methods for masonry mortar - Part 11: Determination of flexural and compressive strength of hardened mortar).
Our organization also provides compression strength testing services with its trained and expert staff and advanced technological equipment, among the numerous test, measurement, analysis and evaluation studies it provides for businesses in various sectors.
To get an appointment, to get more detailed information or to request an evaluation, you can ask us to fill in our form and reach you.
