EN European Norm Tests Part 109

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 50083-1 : 1994 ; Cable distribution systems for television and audio signals. Security requirements
• EN 50083-2: 1995; Cable distribution systems for television and audio signals. Electromagnetic compatibility for equipment
• EN 50083-2: 2006; Cable networks for television signals, audio signals and interactive services. Electromagnetic compatibility for equipment
• EN 50083-2 : 2012+A1 : 2015 ; Cable networks for television signals, audio signals and interactive services. Electromagnetic compatibility for equipment
• EN 50083-3: 1995; Cable distribution systems for television and audio signals. Active coaxial broadband distribution equipment
• EN 50083-3: 1999; Cable distribution systems for television and audio signals. Active broadband equipment for coaxial cable networks
• EN 50083-4: 1995; Cable distribution systems for television and audio signals. Passive coaxial broadband distribution equipment
• EN 50083-4: 1999; Cable distribution systems for television and audio signals. Passive broadband equipment for coaxial cable networks
• EN 50083-5 : 1994 ; Cable distribution systems for television and audio signals. head end equipment
• EN 50083-6: 1995; Cable distribution systems for television and audio signals. optical equipment
• EN 50083-6: 1998; Cable distribution systems for television and audio signals. optical equipment
• EN 50083-7 : 1996+A1 : 2000 ; Cable networks for television signals, audio signals and interactive services. System performance
• EN 50083-8 : 2013 ; Cable networks for television signals, audio signals and interactive services. Electromagnetic compatibility for networks
• EN 50083-9: 1997; Cable distribution systems for television and audio signals. Interfaces for CATV/SMATV headers and similar professional equipment for DVB/MPEG-2 streaming streams
• EN 50083-9: 1999; Cable distribution systems for television and audio signals. Interfaces for CATV/SMATV headers and similar professional equipment for DVB/MPEG-2 streaming streams
• EN 50083-10 : 1999 ; Cable distribution systems for television and audio signals. System performance for return paths
• EN 50084 : 1992 ; Specification for the safety of household and similar electrical appliances. Requirements for connecting washing machines, dishwashers and tumble dryers to the water mains.
• EN 50085-1 : 1999 ; Cable trays and cable tray systems for electrical installations. General Requirements
• EN 50085-1 : 2005+A1 : 2013 ; Cable tray systems and cable tray systems for electrical installations. General Requirements
• EN 50085-2-1 : 2006+A1 : 2011 ; Cable tray systems and cable tray systems for electrical installations. Cable tray systems and cable tray systems intended for mounting on walls and ceilings
• EN 50085-2-2 : 2008 ; Cable tray systems and cable tray systems for electrical installations. Special requirements for cable tray systems and cable tray systems intended to be installed underfloor, flat-floor or on-floor
• EN 50085-2-3: 2010; Cable tray systems and cable tray systems for electrical installations. Special requirements for slotted cable tray systems designed for installation in cabinets
• EN 50085-2-4: 2009; Cable tray systems and cable tray systems for electrical installations. Special requirements for service poles and service poles
• EN 50086-1 : 1994 ; Duct systems specification for cable management. General Requirements
• EN 50086-2-1: 1996; Duct systems specification for cable management. Special requirements. Rigid duct systems
• EN 50086-2-2: 1996; Duct systems specification for cable management. Special requirements. Flexible duct systems
• EN 50086-2-3: 1996; Duct systems specification for cable management. Special requirements. Flexible duct systems
• EN 50086-2-4: 1994; Duct systems specification for cable management. Special requirements. underground duct systems
• EN 50087: 1993; Safety of home and similar electrical appliances. Special requirements for bulk milk coolers.
• EN 50089: 1992; Specification for cast resin bulkheads for metal-enclosed gas-filled high-voltage switchgear and control gear.
• EN 50090-1: 2011; House and building electronic systems (HBES). Standardization structure
• EN 50090-8: 2001; House and building electronic systems (HBES). Conformity assessment of products
• EN 50090-2-1: 1996; House and building electronic systems (HBES). System view. Architectural
• EN 50090-2-2 : 1996+A2 : 2007 ; House and building electronic systems (HBES). System view. General technical requirements
• EN 50090-2-3: 2005; House and building electronic systems (HBES). System view. General functional safety requirements for products intended to be integrated into HBES
• EN 50090-3-1: 1996; House and building electronic systems (HBES). aspects of the application. Introduction to application structure
• EN 50090-3-2: 1996; House and building electronic systems (HBES). aspects of the application. User process
• EN 50090-3-3: 2009; House and building electronic systems (HBES). aspects of the application. HBES Interworking model and common HBES data types
• EN 50090-4-3: 2007; House and building electronic systems (HBES). Media-independent layers. Communication over IP
• EN 50090-4-3 : 2015 ; Home and Building Electronic Systems (HBES). Media-independent layers. Communication over IP (EN 13321-2)
• EN 50090-5-1 : 2005 ; House and building electronic systems (HBES). Media and media dependent layers. Power line for HBES Class 1
• EN 50090-5-3: 2006; House and building electronic systems (HBES). Media and media dependent layers. Radio frequency
• EN 50090-5-3: 2016; Home and Building Electronic Systems (HBES). Media and media dependent layers. Radio Frequency for HBES Class 1
• EN 50090-9-1 : 2004 ; House and building electronic systems (HBES). Installation requirements
• EN 50091-1 : 1993 ; Specification for uninterruptible power systems (UPS). General and safety requirements
• EN 50091-2: 1996; Specification for uninterruptible power systems (UPS). EMC requirements
• EN 50091-1-1: 1997; Uninterruptible power systems (UPS). General and safety requirements for UPS used in operator access areas
• EN 50091-1-2 : 1999 ; Specification for uninterruptible power systems (UPS). General and safety requirements for UPS used in restricted access locations
• EN 50094: 1993; Access control system for MAC/packet family: EUROCRYPT.
• EN 50098-1 : 1994 ; Customer premises wiring for information technology. ISDN basic access
• EN 50098-1 : 1999 ; Customer premises wiring for information technology. ISDN basic access
• EN 50098-2: 1996; Customer premises wiring for information technology. 2048 kbit/s ISDN primary access and leased line network interface
• EN 50103: 1996; Guidance on the application of EN 29001 and EN 46001 and EN 29002 and EN 46002 for the active (including active implantable) medical device industry.
• EN 50104: 1996; Electrical device for the detection and measurement of oxygen. Performance requirements and test methods.
• EN 50104: 1999; Electrical device for the detection and measurement of oxygen. Performance requirements and test methods.
• EN 50104: 2010; Electrical device for the detection and measurement of oxygen. Performance requirements and test methods.
• EN 50106: 1997; Specification for the safety of household and similar electrical appliances. Specific rules for routine testing of devices within the scope of BS EN 60335-1 and BS EN 60967;
• EN 50106: 2008; Safety of home and similar electrical appliances. Special rules for routine testing of devices within the scope of EN 60335-1;
• EN 50107-2: 2005; Signs and light discharge tube installations operating at a rated no-load output voltage exceeding 1 kV but not exceeding 10 kV. Requirements for earth leakage and open circuit protection devices
• EN 50107: 1998; Signs and light discharge tube installations operating at a rated no-load output voltage exceeding 1 kV but not exceeding 10 kV.
• EN 50109-1: 1996; Hand tightening tools. Means for crimping termination of electrical cables and wires for low frequency and radio frequency applications. General requirements and tests
• EN 50109-2-1: 1996; Hand tightening tools. Means for crimping termination of electrical cables and wires for low frequency and radio frequency applications. Special requirements. Radio frequency connectors and concentric contacts. Fixed mold open throat instruments in sizes A to E, V and W
• EN 50109-2-2: 1995; Hand tightening tools. Means for crimping termination of electrical cables and wires for low frequency and radio frequency applications. Special requirements for radio frequency connectors and concentric contacts. Open throat tools with removable and replaceable dies, sizes A to G, Q to T, V and W
• EN 50109-2-3: 1996; Hand tightening tools. Means for crimping termination of electrical cables and wires for low frequency and radio frequency applications. Special requirements. Contacts of electrical connectors
• EN 50109-2-4: 1996; Hand tightening tools. Means for crimping termination of electrical cables and wires for low frequency and radio frequency applications. Special requirements. Center contacts of RF connectors, SMZ series
• EN 50109-2-5: 1996; Hand tightening tools. Means for crimping termination of electrical cables and wires for low frequency and radio frequency applications. Special requirements. Termination of biaxial cable for bus applications
• EN 50110-1: 2013; Operation of electrical installations. General Requirements
• EN 50110-2: 1997; Operation of electrical installations. National annexes
• EN 50110-2: 2010; Operation of electrical installations. National annexes
• EN 50112: 1996; Measurement, control, regulation. Electrical temperature sensors. Metal shielding pipes for TC assemblies.
• EN 50113: 1996; Measurement, control, regulation. Electrical temperature sensors. Insulation tubes for thermocouples.
• EN 50116: 1996; Information technology equipment. Routine electrical safety tests in production.
• EN 50116: 2006; Information technology equipment. Routine electrical safety tests in production.
• EN 50117-2: 1996; Coaxial cables. Cross-section specifications for indoor drop cables
• EN 50117-3: 1996; Coaxial cables used in wired distribution networks. Cross-section specifications for outdoor drop cables
• EN 50117-4: 1996; Coaxial cables used in wired distribution networks. Cross-section specifications for distribution and trunk cables
• EN 50117-5: 1997; Coaxial cables used in wired distribution networks. Cross-sectional specifications for indoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz
• EN 50117-6: 1997; Coaxial cables used in wired distribution networks. Cross-sectional specifications for outdoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz
• EN 50117-2-1 : 2005+A2 : 2013 ; Coaxial cables. Cross-section specifications for cables used in wireline distribution networks. Indoor drop cables for systems operating at 5 MHz-1000 MHz
• EN 50117-2-2 : 2004+A2 : 2013 ; Coaxial cables. Cross-section specifications for cables used in wireline distribution networks. Outdoor drop cables for systems operating at 5 MHz-1000 MHz
• EN 50117-2-3 : 2004+A2 : 2013 ; Coaxial cables. Cross-section specifications for cables used in wireline distribution networks. Distribution and trunk cables for systems operating from 5 MHz to 1000 MHz
• EN 50117-2-4 : 2004+A2 : 2013 ; Coaxial cables. Cross-section specifications for cables used in wireline distribution networks. Indoor drop cables for systems operating at 5 MHz-3000 MHz
• EN 50117-2-5 : 2004+A2 : 2013 ; Coaxial cables. Cross-section specifications for cables used in wireline distribution networks. Outdoor drop cables for systems operating at 5 MHz-3000 MHz
• EN 50117-4-1 : 2008+A1 : 2013 ; Coaxial cables. Cross-section specifications for BCT wiring cables according to EN 50173; Indoor drop cables for systems operating at 5 MHz – 3 MHz
• EN 50117-4-2: 2015; Coaxial cables. Cross-sectional specifications for CATV cables up to 6 GHz used in cable distribution networks
• EN 50119 : 2009+A1 : 2013 ; Railway applications. Fixed installations. Electric traction overhead contact lines.
• EN 50121-1 : 2000 ; Railway applications. Electromagnetic compatibility. general
• EN 50121-1 : 2006 ; Railway applications. Electromagnetic compatibility. general
• EN 50121-1 : 2015 ; Railway applications. Electromagnetic compatibility. general
• EN 50121-2 : 2000 ; Railway applications. Electromagnetic compatibility. Emission of the entire railway system to the outside world
• EN 50121-2: 2006; Railway applications. Electromagnetic compatibility. Emissions of the entire railway system to the outside world
• EN 50121-2 : 2015 ; Railway applications. Electromagnetic compatibility. Emission of the entire railway system to the outside world
• EN 50121-4: 2000; Railway applications. Electromagnetic compatibility. Emission and immunity of signaling and telecommunications equipment
• EN 50121-4: 2006; Railway applications. Electromagnetic compatibility. Emission and immunity of signaling and telecommunications equipment
• EN 50121-4: 2015; Railway applications. Electromagnetic compatibility. Emission and immunity of signaling and telecommunications equipment
• EN 50121-5: 2006; Railway applications. Electromagnetic compatibility. Emission and immunity of fixed power supply installations and apparatus
• EN 50121-5: 2015; Railway applications. Electromagnetic compatibility. Emission and immunity of fixed power supply installations and apparatus
• EN 50121-3-1: 2006; Railway applications. Electromagnetic compatibility. Wheeled vehicle. Train and complete vehicle
• EN 50121-3-1: 2015; Railway applications. Electromagnetic compatibility. Wheeled vehicle. Train and complete vehicle
• EN 50121-3-2: 2006; Railway applications. Electromagnetic compatibility. Wheeled vehicle. apparatus

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.