EN European Norm Tests Part 20

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 1048: 2014; heat exchangers. Air-cooled liquid coolers ('dry coolers'). Test procedures to determine performance.
• EN 1049-2: 1994; Textile. Woven fabrics. Structure. Analysis methods.. Determination of the number of teeth per unit length
• EN 1050: 1997; Machinery safety. Risk assessment principles.
• EN 1051-2: 2007; Glass in the building. Glass blocks and glass pavers. Conformity assessment/Product standard
• EN 1052-1: 1999; Test methods for masonry. Determination of compressive strength
• EN 1052-2: 1999; Test methods for masonry. determination of bending strength
• EN 1052-2: 2016; Test methods for masonry. determination of bending strength
• EN 1052-4: 2000; Test methods for masonry. Determination of shear strength including moisture resistant course
• EN 1052-5: 2005; Test methods for masonry. Determination of bond strength by bond key method
• EN 1053: 1996; Plastic piping systems. Thermoplastic piping systems for pressureless applications. Test methods for waterproofing.
• EN 1054: 1996; Plastic piping systems. Thermoplastic piping systems for soil and waste disposal. Test method for air tightness of joints.
• EN 1055: 1996; Plastic piping systems. Thermoplastic piping systems for soil and waste discharge inside buildings. Test method for resistance to high temperature cycling.
• EN 1056: 1996; Plastic pipe and duct systems. Plastic pipes and fittings. The method of direct (natural) exposure to weathering.
• EN 1057: 1996; Copper and copper alloys. Seamless, round copper tubing for water and gas in sanitary and heating applications.
• EN 1057 : 2006+A1 : 2010 ; Copper and copper alloys. Seamless, round copper tubing for water and gas in sanitary and heating applications.
• EN 1058: 1996; Wood based panels. Determination of mechanical properties and characteristic values ​​of density.
• EN 1058: 2009; Wood based panels. Determination of characteristic 5 percentiles and characteristic mean values.
• EN 1059: 1999; wooden structures. Product requirements for prefabricated trusses using perforated metal plate fasteners.
• EN 1060-1 : 1995+A2 : 2009 ; Non-invasive blood pressure monitor. General Requirements
• EN 1060-2 : 1995+A1 : 2009 ; Non-invasive blood pressure monitor. Additional requirements for mechanical sphygmomanometers
• EN 1060-3 : 1997+A2 : 2009 ; Non-invasive blood pressure monitor. Additional requirements for electro-mechanical blood pressure measurement systems
• EN 1061: 1997; Respiratory protective devices for self-rescue. Self-contained rebreather. Chemical oxygen (NaClO$d3) escape apparatus. Requirements, testing, marking.
• EN 1062-1: 1997; Paints and varnishes. Coating materials and coating systems for exterior wall and concrete. classification
• EN 1062-3: 1999; Paints and varnishes. Coating materials and coating systems for exterior wall and concrete. Determination and classification of liquid-water transmission rate (permeability)
• EN 1062-3: 2008; Paints and varnishes. Coating materials and coating systems for exterior wall and concrete. Determination of liquid water permeability
• EN 1063: 2000; Glass in the building. Safety glass. Testing and classification of resistance to bullet attack.
• EN 1064: 2005; Health informatics. Standard communication protocol. Computer-assisted electrocardiography.
• EN 1065: 1999; Adjustable telescopic steel props. Product features, design and evaluation by calculation and testing.
• EN 1067: 1998; Adhesives. Examining and preparing samples for testing.
• EN 1067: 2005; Adhesives. Examining and preparing samples for testing.
• EN 1068: 2005; Health informatics. Registration of coding systems.
• EN 1069-1: 1996; 2 m high water slides. Security requirements and test methods
• EN 1069-1: 2000; 2 m high water slides. Security requirements and test methods
• EN 1069-1: 2010; Waterslide. Security requirements and test methods
• EN 1069-2: 1996; 2 m high water slides. Instructions
• EN 1069-2: 2000; 2 m high water slides. Instructions
• EN 1071-3: 2005; Advanced technical ceramics. Test methods for ceramic coatings. Determination of adhesion and other mechanical failure modes with a scratch test
• EN 1071-4: 2006; Advanced technical ceramics. Test methods for ceramic coatings. Determination of chemical composition by electron probe microanalysis (EPMA)
• EN 1071-6: 2007; Advanced technical ceramics. Test methods for ceramic coatings. Determination of wear resistance of coatings by micro-abrasion wear test
• EN 1071-9: 2009; Advanced technical ceramics. Test methods for ceramic coatings. Determination of breaking stress
• EN 1071-10: 2009; Advanced technical ceramics. Test methods for ceramic coatings. Determination of coating thickness by section
• EN 1071-12 : 2010 ; Advanced technical ceramics. Test methods for ceramic coatings. Piston wear test
• EN 1071-13 : 2010 ; Advanced technical ceramics. Test methods for ceramic coatings. Determination of wear rate on the disc by pin method
• EN 1072: 1995; Plywood. Definition of bending properties for structural plywood.
• EN 1073-1: 1998; Protective clothing against radioactive contamination. Requirements and test methods for ventilated protective clothing against particulate radioactive contamination
• EN 1073-1: 2016; Protective clothing against solid particles in the air, including radioactive contamination. Requirements and test methods for compressed air line ventilated protective clothing protecting the body and respiratory tract
• EN 1074-1 : 2000 ; Valves for water supply. Fitness for purpose requirements and appropriate validation tests. General Requirements
• EN 1074-2: 2000; Valves for water supply. Fitness for purpose requirements and appropriate validation tests. isolation valves
• EN 1074-3: 2000; Valves for water supply. Fitness for purpose requirements and appropriate validation tests. check valves
• EN 1074-4: 2000; Valves for water supply. Fitness for purpose requirements and appropriate validation tests. air valves
• EN 1074-5: 2001; Valves for water supply. Fitness for purpose requirements and appropriate validation tests. control valves
• EN 1074-6: 2008; Valves for water supply. Fitness for purpose requirements and appropriate validation tests. hydrants
• EN 1075: 2000; wooden structures. Test methods. Joints made with perforated metal plate fasteners.
• EN 1075: 2014; wooden structures. Test methods. Joints made with perforated metal plate fasteners.
• EN 1076: 1997; Workplace environments. Pumped absorber tubes for the determination of gases and vapors. Requirements and test methods.
• EN 1076: 2009; Workplace exposure. Procedures for measuring gases and vapors using pump samplers. Requirements and test methods.
• EN 1077: 1996; Helmet specifications for alpine skiers.
• EN 1077: 2007; Helmets for alpine skiers and snowboarders.
• EN 1078: 1997; Helmets for pedal cyclists and skateboard and roller skate users.
• EN 1078 : 2012+A1 : 2012 ; Helmets for pedal cyclists and skateboard and roller skate users.
• EN 1080 : 1997 ; Impact protection helmets for young children.
• EN 1080 : 2013 ; Impact protection helmets for young children.
• EN 1081: 1998; Flexible floor coverings. Determination of electrical resistance.
• EN 1082-1: 1997; Protective clothing. Gloves and arm guards that protect against cuts and knives with hand knives. Chain mail gloves and arm guards
• EN 1082-2: 2000; Protective clothing. Gloves and arm guards that protect against cuts and knives with hand knives. Gloves and arm guards made of material other than chain mail
• EN 1083-1: 1997; Powered brushes. Definitions and nomenclature
• EN 1084: 1995; Plywood. Formaldehyde emission classes determined by gas analysis method.
• EN 1086: 1996; Sacks for transporting food aid. Recommendations on the choice of sack type and lining according to the product to be packed.
• EN 1087-1: 1995; Particle boards. Determination of moisture resistance. Particle boards. Determination of moisture resistance. boiling test
• EN 1088 : 1995+A2 : 2008 ; Machinery safety. Locking devices associated with guards. Design and selection principles.
• EN 1089-1: 1997; Portable gas cylinders. Gas cylinder identification (except LPG). stamp marking
• EN 1089-2: 1997; Portable gas cylinders. Gas cylinder identification (except LPG). precautionary labels
• EN 1089-3: 1997; Portable gas cylinders. Gas cylinder identification (except LPG). color code
• EN 1089-3: 2004; Portable gas cylinders. Gas cylinder identification (except LPG). color code
• EN 1089-3: 2011; Portable gas cylinders. Gas cylinder identification (except LPG). color code
• EN 1090-1 : 2009+A1 : 2011 ; Execution of steel structures and aluminum structures. Requirements for conformity assessment of structural components
• EN 1090-2 : 2008+A1 : 2011 ; Execution of steel structures and aluminum structures. Technical requirements for steel structures
• EN 1090-3: 2008; Execution of steel structures and aluminum structures. Technical requirements for aluminum structures
• EN 1092-1 : 2007+A1 : 2013 ; Flanges and joints. Circular flanges for pipes, valves, fittings and accessories are designated PN. steel flanges
• EN 1092-2: 1997; Flanges and joints. Circular flanges for pipes, valves, fittings and accessories are designated PN. cast iron flanges
• EN 1093-1: 1999; Machinery safety. Evaluation of the emission of dangerous substances in the air. Selection of test methods
• EN 1093-1: 2008; Machinery safety. Evaluation of the emission of dangerous substances in the air. Selection of test methods
• EN 1093-2 : 2006+A1 : 2008 ; Machinery safety. Evaluation of the emission of dangerous substances in the air. Tracer gas method for measuring the emission rate of a particular pollutant
• EN 1093-3: 1996; Machinery safety. Evaluation of the emission of dangerous substances in the air. Emission rate of a given pollutant. Bench test method using real contaminant
• EN 1093-3 : 2006+A1 : 2008 ; Machinery safety. Evaluation of the emission of dangerous substances in the air. Test bench method for measuring the emission rate of a particular pollutant
• EN 1093-4 : 1996+A1 : 2008 ; Machinery safety. Evaluation of the emission of dangerous substances in the air. Capture the efficiency of an exhaust system. tracking method
• EN 1093-6 : 1998+A1 : 2008 ; Machinery safety. Evaluation of the emission of dangerous substances in the air. Separation efficiency by mass, ductless outlet
• EN 1093-7 : 1998+A1 : 2008 ; Machinery safety. Evaluation of the emission of dangerous substances in the air. Separation efficiency by mass, channel outlet
• EN 1093-8 : 1998+A1 : 2008 ; Machinery safety. Evaluation of the emission of dangerous substances in the air. Pollutant concentration parameter, test bench method
• EN 1093-9 : 1998+A1 : 2008 ; Machinery safety. Evaluation of the emission of dangerous substances in the air. Pollutant concentration parameter, room method
• EN 1094-1: 1997; Insulation refractory products. Terminology for ceramic fiber products
• EN 1094-1 : 2008 ; Insulation refractory products. Terminology, classification and test methods for high temperature insulation wool products
• EN 1094-2: 1999; Insulation refractory products. Classification of shaped products
• EN 1094-4: 1995; Insulation refractory products. Determination of bulk density and true porosity
• EN 1094-5: 1995; Insulation refractory products. Determination of cold breaking strength
• EN 1094-6: 2000; Insulation refractory products. Determination of permanent change in the dimensions of shaped products on heating
• EN 1095: 1998; Deck harness and safety rope for use on pleasure boats. Security requirements and test methods.
• EN 1096-1: 1999; Glass in the building. Coated glass. Definitions and classification
• EN 1096-1: 2012; Glass in the building. Coated glass. Definitions and classification
• EN 1096-2: 2001; Glass in the building. Coated glass. Requirements and test methods for A, B and S class coatings

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.