EN European Norm Tests Part 119

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 60079-26 : 2007 ; explosive atmospheres. Equipment with equipment protection level (EPL) Ga
• EN 60079-26 : 2015 ; explosive atmospheres. Equipment with Equipment Protection Level (EPL) Ga
• EN 60079-27: 2006; Electrical equipment for explosive gas atmospheres. Fieldbus intrinsically safe concept (FISCO) and fieldbus non-inducing concept (FNICO)
• EN 60079-27 : 2008 ; explosive atmospheres. Fieldbus intrinsically safe concept (FISCO)
• EN 60079-28 : 2007 ; explosive atmospheres. Protection of equipment and transmission systems using optical radiation
• EN 60079-28 : 2015 ; explosive atmospheres. Protection of equipment and transmission systems using optical radiation
• EN 60079-31 : 2009 ; explosive atmospheres. Equipment dust ignition protection with “t” housing
• EN 60079-31 : 2014 ; explosive atmospheres. Equipment dust ignition protection with “t” housing
• EN 60079-30-2 : 2007 ; explosive atmospheres. Electric resistance trace heating. Application guide for design, installation and maintenance
• EN 60079-32-2 : 2015 ; explosive atmospheres. Electrostatic hazards. tests
• EN 60079-35-1 : 2011 ; explosive atmospheres. Caplights for use in Fireamp sensitive mines. General Requirements. Construction and testing of explosion risk
• EN 60079-35-2: 2012; explosive atmospheres. Caplights for use in Fireamp sensitive mines. Other performance and security issues
• EN 60079-20-1 : 2010 ; explosive atmospheres. Material properties for gas and vapor classification. Test methods and data
• EN 60079-29-1 : 2007 ; explosive atmospheres. Gas detectors. Performance requirements of detectors for flammable gases
• EN 60079-30-1 : 2007 ; explosive atmospheres. Electric resistance trace heating. General and test requirements
• EN 60079-29-2 : 2007 ; explosive atmospheres. Gas detectors. Selection, installation, use and maintenance of flammable gas and oxygen detectors
• EN 60079-29-2 : 2015 ; explosive atmospheres. Gas detectors. Selection, installation, use and maintenance of flammable gas and oxygen detectors
• EN 60079-29-3: 2014; explosive atmospheres. Gas detectors. Guidance on the functional safety of fixed gas detection systems
• EN 60079-29-4 : 2010 ; explosive atmospheres. Gas detectors. Performance requirements of open path detectors for flammable gases
• EN 60079-10-1 : 2009 ; explosive atmospheres. Classification of fields. explosive gas environments
• EN 60079-10-1 : 2015 ; explosive atmospheres. Classification of fields. explosive gas environments
• EN 60079-10-2: 2009; explosive atmospheres. Classification of fields. Combustible dust environments
• EN 60079-10-2 : 2015 ; explosive atmospheres. Classification of fields. explosive dust environments
• EN 60081 : 1994 ; Characteristics of tubular fluorescent lamps for general lighting service.
• EN 60081 : 1998+A5 : 2013 ; Double capped fluorescent lamps. Performance characteristics.
• EN 60085 : 2008 ; Electrical insulation. Thermal evaluation and assignment.
• EN 60086-2: 2007; Primary batteries. Physical and electrical properties
• EN 60086-2: 2011; Primary batteries. Physical and electrical properties
• EN 60086-2: 2016; Primary batteries. Physical and electrical properties
• EN 60086-4: 1996; Primary batteries. Safety standard for lithium batteries
• EN 60086-4:2007; Primary batteries. Safety of lithium batteries
• EN 60086-4: 2015; Primary batteries. Safety of lithium batteries
• EN 60086-5: 2001; Primary batteries. Safety of batteries with aqueous electrolytes
• EN 60086-5: 2005; Primary batteries. Safety of batteries with aqueous electrolytes
• EN 60086-5: 2011; Primary batteries. Safety of batteries with aqueous electrolytes
• EN 60086-5: 2016; Primary batteries. Safety of batteries with aqueous electrolytes
• EN 60092-507 : 2000 ; Electrical installation on ships. cruise boat
• EN 60092-507: 2015; Electrical installation on ships. small ships
• EN 60094-1 : 1994 ; Magnetic tape sound recording and reproduction systems. Specification for general terms and requirements
• EN 60094-2 : 1994 ; Magnetic tape sound recording and reproduction systems. calibration tapes
• EN 60094-2 : 1996 ; Magnetic tape sound recording and reproduction systems. calibration tapes
• EN 60094-3: 1997; Magnetic tape sound recording and reproduction systems. Methods of measuring the properties of recording and reproduction equipment for sound on magnetic tape
• EN 60094-4: 1994; Magnetic tape sound recording and reproduction systems. Mechanical magnetic tape properties
• EN 60094-5 : 1994 ; Magnetic tape sound recording and reproduction systems. Specification for electrical magnetic tape properties
• EN 60094-7 : 1994 ; Magnetic tape sound recording and reproduction systems. Cassette specifications for commercial tape recordings and home use
• EN 60095-1 : 1993 ; Lead acid starter batteries. General requirements and test methods
• EN 60095-2: 1993; Lead acid starter batteries. Dimensions of batteries and dimensions and marking of terminals
• EN 60095-4: 1993; Lead acid starter batteries. Battery dimensions for heavy commercial vehicles
• EN 60097: 1993; Specification for grid systems for printed circuits.
• EN 60099-1 : 1994 ; Surge arresters. Non-linear resistance type surge arresters for AC systems
• EN 60099-4 : 1993 ; Surge arresters. Gapless metal oxide surge arresters for AC systems
• EN 60099-4 : 2014 ; Surge arresters. Gapless metal oxide surge arresters for AC systems
• EN 60099-5: 1997; Surge arresters. Selection and application recommendations
• EN 60099-5: 2013; Surge arresters. Selection and application recommendations
• EN 60099-8 : 2011 ; Surge arresters. Metal oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of ac systems above 1 kV
• EN 60099-9: 2014; Surge arresters. Gapless metal oxide surge arresters for HVDC converter stations
• EN 60107-1: 1997; Measurement methods in receivers for broadcast television transmission. General Reviews. Measurements on screens at radio and video frequencies
• EN 60107-5: 1999; Measurement methods in receivers for broadcast television transmission. Electrical measurements on multi-channel audio television receivers using the NICAM two-channel digital audio system
• EN 60107-7: 1997; Measurement methods in receivers for broadcast television transmission. HDTV screens
• EN 60107-8: 1997; Measurement methods in receivers for broadcast television transmission. Measurements on D2-MAC/package equipment
• EN 60110-1: 1998; Power capacitors for induction heating installations. general
• EN 60115-1 : 2011+A11 : 2015 ; Fixed resistors for use in electronic equipment. General specification
• EN 60115-2: 2015; Fixed resistors for use in electronic equipment. Section properties : Leaded fixed low power film resistors
• EN 60115-8: 2012; Fixed resistors for use in electronic equipment. Section properties. Fixed surface mount resistors
• EN 60115-8-1 : 2015 ; Fixed resistors for use in electronic equipment. Blank detail feature Fixed surface mount (SMD) low power film resistors for general electronic equipment, classification level G
• EN 60118-0: 1993; Hearing aids. Methods for measuring electroacoustic properties
• EN 60118-0: 2015; Electroacoustic. Hearing aids. Measurement of performance characteristics of hearing aids
• EN 60118-1: 1995; Hearing aids. Hearing aids with induction receiver coil input
• EN 60118-2: 1996; Hearing aids. Methods for measuring electroacoustic properties of hearing aids with automatic gain control circuits
• EN 60118-4: 1998; Hearing aids. Magnetic field strength in audio frequency induction loops for hearing aids
• EN 60118-4: 2006; Electroacoustic. Hearing aids. Induction loop systems for hearing aids. magnetic field strength
• EN 60118-4: 2015; Electroacoustic. Hearing aids. Induction loop systems for hearing aids. System performance requirements
• EN 60118-6 : 1999 (Edition 2); Hearing aids. Characteristics of electrical input circuits for hearing aids
• EN 60118-6: 1999; Hearing aids. Characteristics of electrical input circuits for hearing aids
• EN 60118-7: 1993; Hearing aids. Methods for measuring performance characteristics of hearing aids for quality inspection on delivery
• EN 60118-7: 2005; Electroacoustic. Hearing aids. Measuring the performance characteristics of hearing aids for the purpose of manufacturing, supply and delivery quality assurance
• EN 60118-8: 2005; Electroacoustic. Hearing aids. Methods of measuring performance characteristics of hearing aids under simulated in situ operating conditions
• EN 60118-12: 1997; Hearing aids. Dimensions of electrical connector systems
• EN 60118-13: 1998; Hearing aids. Electromagnetic compatibility (EMC). product standard
• EN 60118-13: 2005; Electroacoustic. Hearing aids. Electromagnetic compatibility (EMC)
• EN 60118-13: 2011; Electroacoustic. Hearing aids. Electromagnetic compatibility (EMC)
• EN 60118-14: 1998; Hearing aids. Features of a digital interface device
• EN 60118-15: 2012; Electroacoustic. Hearing aids. Methods for characterizing signal processing in hearing aids with a speech-like signal
• EN 60122-3: 2010; Quartz crystal units of evaluated quality. Standard trunks and lead connections
• EN 60127-1 : 2006+A2 : 2015 ; Miniature fuses. Definitions for miniature fuses and general requirements for miniature fuses
• EN 60127-3: 1996; Miniature fuses. Specifications for sub-miniature fuse links
• EN 60127-3: 2015; Miniature fuses. Sub-miniature fuse links
• EN 60127-4: 1998; Miniature fuses. Universal modular fuse links (UMF)
• EN 60127-4 : 2005+A2 : 2013 ; Miniature fuses. Universal modular fuse links (UMF). Through hole and surface mount types
• EN 60127-6: 1994; Miniature fuses. Fuse holders for miniature cartridge fuse links
• EN 60127-6: 2014; Miniature fuses. Fuse holders for miniature fuse links
• EN 60127-7: 2013; Miniature fuses. Miniature fuse links for special applications
• EN 60127-7: 2016; Miniature fuses. Miniature fuse links for special applications
• EN 60129: 1994; Technical specifications for alternating current disconnectors and earthing switches.
• EN 60130-9: 1997; Connectors for frequencies below 3 MHz. Circular connectors for radio and related audio equipment
• EN 60130-9: 2001; Connectors for frequencies below 3 MHz. Circular connectors for radio and related audio equipment
• EN 60130-9: 2011; Connectors for frequencies below 3 MHz. Circular connectors for radio and related audio equipment
• EN 60130-17: 1999; Connectors for frequencies below 3 MHz. Detail specifications of interconnect devices allowing versatile pairing for use with rechargeable batteries
• EN 60137: 1996; Insulated bushings for alternating voltages above 1 kV.
• EN 60137 : 2008 ; Insulated bushings for alternating voltages above 1000 V.

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.