EN European Norm Tests Part 42

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 2997-014: 2016; Aviation series. Connectors, electrical, circular, threaded ring coupled, fireproof or non-fireproof, operating temperatures -65 ^DC to 175 ^DC continuous, 200 ^DC continuous, 260 ^DC peak. Square flange seat with integrated accessories. product standard
• EN 2997-015 : 2011 ; Aviation series. Connectors, electrical, circular, threaded ring coupled, fireproof or non-fireproof, operating temperatures -65^DC to 175^DC continuous, 200^DC continuous, 260^DC peak. Housing with clamping nut with integrated accessories. product standard
• EN 2997-016 : 2010 ; Aviation series. Connectors, electrical, circular, threaded ring coupled, fireproof or non-fireproof, operating temperatures -65^DC to 175^DC continuous, 200^DC continuous, 260^DC peak. Plug with integrated accessories. product standard
• EN 2998: 1996; Washers, flat, of heat-resistant steel, passivated.
• EN 3004: 1997; Nuts, self-locking, MJ threads, of heat-resistant steel FE-PA2601 (A286). Classification : 1100 MPa (at ambient temperature)/650^DC. Technical specification.
• EN 3005: 2004; Aviation series. Nuts, self-locking, MJ threads, heat resistant nickel base alloy NI-PH1302 (Waspaloy), silver plated or unplated. Classification : 1210 MPa (at ambient temperature) / 730^DC. Technical specification.
• EN 3006: 1994; Bolts, hex head, embossed shank, long thread, heat resistant steel FE-PA92HT (A286). Classification : 900 MPa (at ambient temperature)/650^DC.
• EN 3007: 1996; Bolts, hex head, embossed shank, long thread, heat resistant steel FE-PA92HT (A286), silver plated. Classification : 900 MPa (at ambient temperature)/650^DC.
• EN 3008: 1998; Bolts, hex head, embossed shank, long thread, heat resistant nickel base alloy NI-P100HT (Inconel 718). Classification : 1275 MPa (at ambient temperature)/650^DC.
• EN 3009: 1998; Bolts, hex head, embossed shank, long thread, heat resistant nickel base alloy NI-P100HT (Inconel 718), silver plated. classification 1275 MPa (at ambient temperature)/650^DC.
• EN 3010: 1998; Bolts, hex head, embossed shank, long thread, heat resistant nickel base alloy NI-P101HT (Waspaloy). Classification : 1210 MPa (at ambient temperature)/730^DC.
• EN 3011: 1998; Bolts, hex head, embossed shank, long thread, heat resistant nickel base alloy NI-P101HT (Waspaloy), silver plated. Classification : 1210 MPa (at ambient temperature)/730 ^DC.
• EN 3012: 1996; Nuts, two hexagonal, self-locking, heat-resistant nickel-based alloy NI-P101HT (Waspaloy). Classification : 1210 MPa (at ambient temperature)/730^DC.
• EN 3013: 1996; Nuts, two hexagonal, self-locking, heat resistant nickel-based alloy NI-P101HT (Waspaloy), silver plated. Classification : 1210 MPa (at ambient temperature)/730^DC.
• EN 3014 : 2015 ; Aviation series. Shaft nuts, self-locking, serrated, heat resistant steel FE-PA2601 (A286). Classification : 1 100 MPa (at ambient temperature) / 650 ^DC.
• EN 3015 : 2015 ; Aviation series. Shaft nuts, self-locking, serrated, heat resistant steel FE-PA2601 (A286), silver plated. Classification : 1 100 MPa (at ambient temperature) / 650 ^DC.
• EN 3016 : 2008 ; Aviation series. The washers are countersunk, the load is spreading. Heat resistant steel.
• EN 3017 : 2008 ; Aviation series. Stamps, coating/packaging. Heat resistant steel.
• EN 3019 : 2008 ; Aviation series. Self-locking plate nuts, floating, two-lug, heat-resistant steel FE-PA92HT (A286). Classification : 1100 MPa (at ambient temperature)/650 ^DC.
• EN 3020: 2008; Aviation series. Self-locking plate nuts, floating, two-lug, heat resistant steel FE-PA92HT (A286), silver plated. Classification : 1100 MPa (at ambient temperature)/650 ^DC.
• EN 3026: 1994; Test method for dry film lubricants. Corrosion test on steel samples.
• EN 3027: 1994; Test method for dry film lubricants. Salt spray test.
• EN 3030: 1994; Test method for dry film lubricants. Solids content.
• EN 3032: 1994; Test method for dry film lubricants. Thickness measurement.
• EN 3033 : 2008 ; Aviation series. Nuts, self-locking, hexagonal with fixed washer, heat-resistant steel FE-PA2601 (A286), uncoated. Classification : 1100 MPa/425^DC.
• EN 3034: 2009; Aviation series. Nuts, self-locking, hex with fixed washer. Made of heat resistant steel FE-PA92HT (A286), silver plated. Classification: 1100 MPa/425 ^DC .
• EN 3035: 1997; Screws, 100$0D countersunk normal head, offset cruciform recess, close tolerance regular shank, short thread, alloy steel, cadmium plated. Classification : 1100 MPa (at ambient temperature)/235^DC.
• EN 3037: 1997; Screws, round head, offset cruciform recess, close tolerance normal shank, short thread, titanium alloy, anodized, MoS$d2 lubricated. Classification : 1100 MPa (at ambient temperature)/315^DC.
• EN 3038: 1997; Screws, round head, offset cruciform recess, close tolerance normal shank, short thread, of heat and corrosion resistant steel, passivated. Classification : 1100 MPa (at ambient temperature)/425^DC.
• EN 3042: 1992; Quality assurance. EN aviation products. Qualification procedure.
• EN 3043 : 2008 ; Aviation series. Fasteners, external thread, heat-resistant steel FE PA92HT (A286). Classification : 900 MPa/650 ^DC, optional production method. Technical specification.
• EN 3044: 1998; Mounting holes for bits, screw thread, helical coil, self-locking. Design standard.
• EN 3045: 1994; Bearings, body rolling. Rigid single row ball bearings in steel. Diameter series 0 and 2 ; Reduced space category. Dimensions and loads.
• EN 3046: 1994; Bearings, body rolling. Steel, cadmium coated rigid single row ball bearings. Diameter series 0 and 2 ; Reduced space category. Dimensions and loads.
• EN 3047: 1994; Bearings, body rolling. Rigid single row ball bearings in corrosion resistant steel. Diameter series 0 and 2 ; Reduced space category. Dimensions and loads.
• EN 3048: 1992; Bearings spherical plain of corrosion-resistant steel with self-lubricating lining. Light series. High loads at ambient temperature. Dimensions and loads.
• EN 3049: 1998; O-rings made of fluorocarbon rubber (FKM), low compression set. Hardness 80 IRHD.
• EN 3050: 1998; O-rings made of fluorocarbon rubber (FKM), low compression set. Technical specification.
• EN 3052 : 1994 ; Bolts, normal hex head, close tolerance normal shank, short thread, heat and corrosion resistant steel, passivated. Classification : 1100 MPa (at ambient temperature)/425^DC.
• EN 3052 : 2009 ; Aviation series. Bolts, normal hex head, close tolerance normal shank, short thread, heat and corrosion resistant steel, passivated. Classification : 1100 MPa (at ambient temperature) / 425 ^DC.
• EN 3053: 1994; Bearings, body rolling. Single row spherical roller bearings in steel. Dimensions and loads.
• EN 3054 : 1994 ; Bearings, body rolling. Single row spherical roller bearings in cadmium-plated steel. Dimensions and loads.
• EN 3055 : 1994 ; Bearings, body rolling. Single row spherical roller bearings in corrosion resistant steel. Dimensions and loads.
• EN 3056: 1994; Bearings, body rolling. Rigid double row ball bearings in steel. Dimensions and loads.
• EN 3057 : 1994 ; Bearings, body rolling. Steel, cadmium-plated rigid double-row ball bearings. Dimensions and loads.
• EN 3058 : 1994 ; Bearings, body rolling. Rigid double-row ball bearings in corrosion-resistant steel. Dimensions and loads.
• EN 3059: 2007; Aviation series. Bearings, body rolling. Rigid single-row ball bearings in steel with flanged alignment housings, cadmium-plated. Dimensions and loads.
• EN 3060: 2007; Aviation series. Bearings, body rolling. Rigid single row ball bearings in cadmium-plated steel with cadmium-plated flanged alignment housings. Dimensions and loads.
• EN 3061: 2007; Aviation series. Bearings, body rolling. Rigid single-row ball bearings in corrosion-resistant steel with flanged alignment housings. Dimensions and loads.
• EN 3063: 1994; Bolts, double hex head, close tolerance shank, medium length thread, heat resistant nickel base alloy NI-P101HT (Waspaloy). Classification : 1210 MPa (at ambient temperature)/730^DC.
• EN 3064: 1996; Shaft nuts, self-locking, knurled. Installation procedure.
• EN 3065: 1996; Mounting holes for self-locking, knurled shank nuts. Design standard.
• EN 3079: 2006; 28000$8D0′ pipe connection up to 30 kPa. Adapters. Metric series. Technical specification.
• EN 3080: 2006; Aviation series. Titanium alloy pipe coupling 8$0D30′. Tees, shrunken, branch with pressure wire nut.
• EN 3102: 2013; Aviation series. Sealing materials. Test methods. Determination of low temperature flexibility.
• EN 3112 : 1995 ; Bolts, normal hex head, head thread, alloy steel, cadmium plated. Classification : 900 MPa (at ambient temperature)/235^DC.
• EN 3114-001: 2006; Aviation series. Test method. Microstructure of ($Ga + $Gb) titanium alloy forged products. General Requirements
• EN 3114-002: 2007; Aviation series. Test method. Microstructure of ($Ga + $Gb) titanium alloy forged products. Microstructure of bars, profiles, forging stock and forgings
• EN 3114-003: 2006; Aviation series. Test method. Microstructure of ($Ga + $Gb) titanium alloy forged products. Microstructure of the plate
• EN 3114-004: 2006; Aviation series. Test method. Microstructure of ($Ga + $Gb) titanium alloy forged products. Microstructure of the sheet for superplastic forming
• EN 3115: 2009; Aviation series. Aluminum alloy 7050-T73 ; Wire for solid rivets. D 3L 10mm.
• EN 3120 : 2012 ; Aviation series. Titanium alloy TI-P64003 ; It is cold worked and stress relieved. Seamless pipe for pressure systems. 4mm 3LD 3L 51mm. 690 MPa $3L Rm $3L 1 030 MPa.
• EN 3135: 1996; Rivets, solid, universal head, corrosion resistant steel FE-PA11, passivated, inch base series.
• EN 3136: 1996; Rivets, solid, universal head, corrosion resistant steel FE-PA92HT, passivated, inch base series.
• EN 3141: 1996; Rivets, solid, universal head, heat resistant nickel base alloy NI-P11, cadmium plated, inch base series.
• EN 3142: 1996; Rivets, solid, universal head, heat resistant nickel base alloy NI-P11, inch base series.
• EN 3148 : 2008 ; Aviation series. Shaft nuts, self-locking, flanged. Installation procedure.
• EN 3149: 1997; Shaft nut. Installation holes, 60$0D forged, flanges. Design standard.
• EN 3150: 1995; Pins, shoulder, headless, of heat resistant nickel base alloy NI-P100HT (Inconel 718).
• EN 3151: 1995; Anchors, flat, heat resistant nickel-based alloy NI-P100HT (Inconel 718).
• EN 3152: 2004; Aviation series. Nuts, self-locking, MJ threads, of heat-resistant steel FE-PA2601 (A286), silver-plated or uncoated. Classification : 1100 MPa (at ambient temperature)/425^DC. Technical specification.
• EN 3155-001: 2009; Aviation series. Electrical contacts used in fasteners. Technical specification
• EN 3155-001: 2016; Aviation series. Electrical contacts used in fasteners. Technical specification
• EN 3155-002: 2006; Aviation series. Electrical contacts used in fasteners. List and use of contacts
• EN 3155-002: 2011; Aviation series. Electrical contacts used in fasteners. List and use of contacts
• EN 3155-003:2005; Aviation series. Electrical contacts used in fasteners. Contacts, electric, female, type A, crimp, class S. product standard
• EN 3155-004: 2007; Aviation series. Electrical contacts used in fasteners. Contacts, electrical, male, type A, crimp, class T. Product standard
• EN 3155-005: 2006; Aviation series. Electrical contacts used in fasteners. Contacts, electric, female, type A, crimp, class T. product standard
• EN 3155-008: 2005; Aviation series. Electrical contacts used in fasteners. Contacts, electrical, male, type A, crimp, class S. product standard
• EN 3155-009: 2006; Electrical contacts used in fasteners. Contacts, electric, female, type A, crimp, class S. product standard
• EN 3155-009: 2009; Aviation series. Electrical contacts used in fasteners. Contacts, electric, female, type A, crimp, class S. product standard
• EN 3155-012: 2006; Aviation series. Electrical contacts used in fasteners. Contacts, electrical, triaxial, size 8, male, type D, solder, class R. Product standard
• EN 3155-013: 2006; Aviation series. Electrical contacts used in fasteners. Contacts, electrical, triaxial, size 8, female, type D, solder, class R. Product standard
• EN 3155-014: 2006; Aviation series. Electrical contacts used in fasteners. Contacts, electrical, male, type A, crimp, class S. product standard
• EN 3155-015: 2006; Aviation series. Electrical contacts used in fasteners. Contacts, electric, female, type A, crimp, class S. product standard
• EN 3155-016: 2006; Aviation series. Electrical contacts used in fasteners. Contacts, electrical, male, type A, crimp, class S. product standard
• EN 3155-017: 2006; Aviation series. Electrical contacts used in fasteners. Contacts, electrical, relay base, female, type A, crimp, class P. Product standard
• EN 3155-018: 2005; Aviation series. Electrical contacts used in fasteners. Contacts, electrical, male, type A, crimp, class S. product standard
• EN 3155-019: 2005; Aviation series. Electrical contacts used in fasteners. Contacts, electric, female, type A, crimp, class S. product standard
• EN 3155-022: 2006; Aviation series. Electrical contacts used in fasteners. Contacts, electrical, rectangular, male, type A, crimp, class R. Product standard
• EN 3155-023: 2006; Aviation series. Electrical contacts used in fasteners. Contacts, electrical, rectangular, female, type A, crimp, class R. Product standard
• EN 3155-024: 2006; Aviation series. Electrical contacts used in fasteners. Contacts, electrical, triaxial, size 8, male, type D, crimp, class S. Product standard
• EN 3155-025: 2006; Aviation series. Electrical contacts used in fasteners. Contacts, electrical, triaxial, size 8, female, type D, crimp, class S. Product standard
• EN 3155-026: 2006; Aviation series. Electrical contacts used in fasteners. Contacts, electrical, male, type A, crimp, class R. product standard
• EN 3155-026: 2010; Aviation series. Electrical contacts used in fasteners. Contacts, electrical, male, type A, crimp, class R. product standard
• EN 3155-027: 2006; Aviation series. Electrical contacts used in fasteners. Contacts, electrical, female, type A, crimp, class R. Product standard
• EN 3155-027: 2015; Aviation series. Electrical contacts used in fasteners. Contacts, electrical, female, type A, crimp, class R. Product standard
• EN 3155-028: 2006; Aviation series. Electrical contacts used in fasteners. Contacts, electrical, coaxial, shielded, size 16, male, type D, crimp, class R. Product standard
• EN 3155-029:2007; Aviation series. Electrical contacts used in fasteners. Contacts, electrical, coaxial, shielded, size 16, female, type D, crimp, class R. Product standard
• EN 3155-030: 2006; Aviation series. Electrical contacts used in fasteners. Contacts, electrical, coaxial, shielded, size 12, male, type D, crimp, class R. Product standard

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.