EN European Norm Tests Part 21

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 1096-2: 2012; Glass in the building. Coated glass. Requirements and test methods for A, B and S class coatings
• EN 1096-3: 2001; Glass in the building. Coated glass. Requirements and test methods for C and D class coatings
• EN 1096-3: 2012; Glass in the building. Coated glass. Requirements and test methods for C and D class coatings
• EN 1096-5: 2016; Glass in the building. Coated glass. Test method and classification for self-cleaning performance of coated glass surfaces
• EN 1097-1: 1996; Tests for mechanical and physical properties of aggregates. Determination of resistance to wear (micro-Deval)
• EN 1097-1: 2011; Tests for mechanical and physical properties of aggregates. Determination of resistance to wear (micro-Deval)
• EN 1097-2: 1998; Tests for mechanical and physical properties of aggregates. Methods for determining resistance to fragmentation
• EN 1097-2: 2010; Tests for mechanical and physical properties of aggregates. Methods for determining resistance to fragmentation
• EN 1097-3: 1998; Tests for mechanical and physical properties of aggregates. Determination of loose bulk density and voids
• EN 1097-4: 1999; Tests for mechanical and physical properties of aggregates. Determination of dry compacted fill voids
• EN 1097-4: 2008; Tests for mechanical and physical properties of aggregates. Determination of dry compacted fill voids
• EN 1097-5: 1999; Tests for mechanical and physical properties of aggregates. Determination of water content by drying in a ventilated oven
• EN 1097-5: 2008; Tests for mechanical and physical properties of aggregates. Determination of water content by drying in a ventilated oven
• EN 1097-6: 2013; Tests for mechanical and physical properties of aggregates. Determination of particle density and water absorption
• EN 1097-7: 1999; Tests for mechanical and physical properties of aggregates. Determination of the particle density of the filler. pycnometer method
• EN 1097-7 : 2008 ; Tests for mechanical and physical properties of aggregates. Determination of the particle density of the filler. pycnometer method
• EN 1097-8: 2000; Tests for mechanical and physical properties of aggregates. Determination of polished stone value
• EN 1097-8: 2009; Tests for mechanical and physical properties of aggregates. Determination of polished stone value
• EN 1097-9: 1998; Tests for mechanical and physical properties of aggregates. Determination of the resistance to wear of studded tires. Scandinavian test
• EN 1097-9: 2014; Tests for mechanical and physical properties of aggregates. Determination of the resistance to wear of studded tires. Scandinavian test
• EN 1097-10: 2014; Tests for mechanical and physical properties of aggregates. Determination of water absorption height
• EN 1097-11: 2013; Tests for mechanical and physical properties of aggregates. Determination of compressibility and limited compressive strength of lightweight aggregates
• EN 1101: 1996; Textiles and textile products. Burning behavior. Curtains and curtains. Detailed procedure for determining the flammability of vertically oriented samples (small flame).
• EN 1102: 1996; Textiles and textile products. Burning behavior. Curtains and curtains. Detailed procedure for determining the flame spread of vertically oriented samples.
• EN 1102: 2016; Textiles and textile products. Burning behavior. Curtains and curtains. Detailed procedure for determining the flame spread of vertically oriented samples.
• EN 1103: 1996; Textile. Burning behavior. Fabrics for clothing. Detailed procedure for determining the burning behavior of fabrics for clothing.
• EN 1103: 2005; Textile. Fabrics for clothing. Detailed procedure for determining combustion behavior.
• EN 1104: 1996; Paper and cardboard intended for contact with foodstuffs. Determination of transfer of antimicrobial components.
• EN 1104: 2005; Paper and cardboard intended for contact with foodstuffs. Determination of transfer of antimicrobial components.
• EN 1106: 2001; Manually operated taps for gas appliances.
• EN 1106: 2010; Manually operated taps for gas appliances.
• EN 1107-1: 2000; Flexible sheets for waterproofing. Determination of dimensional stability. bitumen sheets for roof waterproofing
• EN 1107-2: 2001; Flexible sheets for waterproofing. Determination of dimensional stability. Plastic and rubber sheets for roof waterproofing
• EN 1108 : 2000 ; Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of form stability under cyclic temperature changes.
• EN 1109: 2000; Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of flexibility at low temperature.
• EN 1109: 2013; Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of flexibility at low temperature.
• EN 1110 : 2000 ; Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of flow resistance at high temperature.
• EN 1110 : 2010 ; Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of flow resistance at high temperature.
• EN 1111: 1999; Sanitary faucet. Thermostatic mixing valves (PN 10). General technical specification.
• EN 1112: 1997; (PN 10) shower outlets for sanitary fittings.
• EN 1112 : 2008 ; Sanitary faucet. Shower outlets for sanitary taps for type 1 and type 2 water supply systems; General technical specification.
• EN 1113 : 2008+A1 : 2011 ; Sanitary faucet. Shower hoses for sanitary taps for type 1 and type 2 water supply systems; General technical specification.
• EN 1113 : 2015 ; Sanitary faucet. Shower hoses for sanitary taps for type 1 and type 2 water supply systems; General technical specification.
• EN 1114-1: 1997; Rubber and plastic machinery. Extruders and extrusion lines. Safety requirements for extruders
• EN 1114-1: 2011; Plastic and rubber machinery. Extruders and extrusion lines. Safety requirements for extruders
• EN 1114-2 : 1998+A1 : 2008 ; Plastic and rubber machinery. Extruders and extrusion lines. Safety requirements for die faced pelletizers
• EN 1114-3 : 2001+A1 : 2008 ; Plastic and rubber machinery. Extruders and extrusion lines. Safety requirements for shipping
• EN 1116: 1996; Kitchen furniture. Compatible dimensions for kitchen furniture and kitchen appliances.
• EN 1117 : 1999 ; heat exchangers. Liquid cooled refrigerant condensers. Test methods to determine performance.
• EN 1118: 1999; heat exchangers. Liquid chillers with refrigerant cooling. Test methods to determine performance.
• EN 1119: 1996; Plastic piping systems. Connections for glass reinforced thermosetting plastic (GRP) pipes and fittings. Test methods for tightness and resistance to damage of flexible and reduced articulated joints.
• EN 1119: 2009; Plastic piping systems. Connections for glass reinforced thermosetting plastic (GRP) pipes and fittings. Test methods for tightness and resistance to damage of non-stress-resistant flexible joints with elastomeric sealing elements.
• EN 1120: 1996; Plastic piping systems. Glass reinforced thermoset plastic (GRP) pipes and fittings. Determination of resistance to chemical attack from inside a deflected section.
• EN 1121 : 2000 ; Doors. Behavior between two different climates. Test method.
• EN 1122: 2001; Plastics. Cadmium determination. Wet separation method.
• EN 1123-1: 1999; Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes for wastewater systems, with bells and sockets. Requirements, tests, quality control
• EN 1123-2: 1999; Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes for wastewater systems, with bells and sockets. Dimensions
• EN 1123-2 : 2006+A1 : 2007 ; Pipes and fittings made of longitudinally welded hot-dip galvanized steel pipe with spouts and sockets for wastewater systems. Dimensions
• EN 1124-1 : 1999 ; Longitudinally welded stainless steel pipes and fittings for waste water systems, with bell and socket. Requirements, tests, quality control
• EN 1124-2: 1999; Longitudinally welded stainless steel pipes and fittings for waste water systems, with bell and socket. System S. Dimensions
• EN 1124-2: 2007; Longitudinally welded stainless steel pipes and fittings for waste water systems, with bell and socket. System S; dimensions
• EN 1124-2: 2014; Longitudinally welded stainless steel pipes and fittings for waste water systems, with bell and socket. System S, forms and dimensions
• EN 1124-3: 1999; Longitudinally welded stainless steel pipes and fittings for waste water systems, with bell and socket. System X. Dimensions
• EN 1124-3: 2008; Longitudinally welded stainless steel pipes and fittings for waste water systems, with bell and socket. System X. Dimensions
• EN 1124-4: 2005; Longitudinally welded stainless steel pipes and fittings for waste water systems, with bell and socket. Components for vacuum drainage systems and drainage systems on ships
• EN 1124-4: 2013; Bell and socket pipes and fittings of longitudinally welded stainless steel pipes for wastewater systems. Components for vacuum drainage systems and drainage systems on ships
• EN 1125: 1997; Building equipment. Panic exit devices operated by a horizontal bar. Requirements and test methods.
• EN 1125 : 2008 ; Building equipment. Panic exit devices operated by a horizontal bar for use on escape routes. Requirements and test methods.
• EN 1127-1: 1998; explosive atmospheres. Explosion prevention and protection. Basic concepts and methodology
• EN 1127-1: 2007; explosive atmospheres. Explosion prevention and protection. Basic concepts and methodology
• EN 1127-1: 2011; explosive atmospheres. Explosion prevention and protection. Basic concepts and methodology
• EN 1127-2: 2014; explosive atmospheres. Explosion prevention and protection. Basic concepts and methodology for mining
• EN 1128: 1996; Cement-bonded particle boards. Determination of hard body impact resistance.
• EN 1129-1: 1995; Furniture. Folding beds. Security requirements and tests. Security requirements
• EN 1129-2: 1995; Furniture. Folding beds. Security requirements and tests. Test methods
• EN 1130-1: 1997; Furniture. Cribs and bassinets for home use. Security requirements
• EN 1130-2: 1996; Furniture. Cribs and bassinets for home use. Test methods
• EN 1131: 1995; Method for determining the relative density of fruit and vegetable juices.
• EN 1132: 1995; Method of determining the pH value of fruit and vegetable juices.
• EN 1133: 1995; Method for determining the formol number of fruit and vegetable juices.
• EN 1134 : 1994 ; Method for determining sodium, potassium, calcium and magnesium contents of fruit and vegetable juices by atomic absorption spectrometry.
• EN 1135: 1995; Fruit and vegetable juices. Method for determination of ash.
• EN 1136: 1995; The method of determining the phosphorus content of fruit and vegetable juices: spectrometric method.
• EN 1137: 1995; Method for determining the citric acid (citrate) content of fruit and vegetable juices: NADH spectrometric method.
• EN 1138: 1995; Enzymatic determination of L-malic acid (L-malate) content of fruit and vegetable juices. NADH spectrometric method.
• EN 1139: 1995; Method for determining the dD-isocitric acid content of fruit and vegetable juices. NADPH spectrometric method.
• EN 1140: 1995; Method for determining the dD-glucose and dD-fructose content of fruit and vegetable juices. NADPH spectrometric method.
• EN 1141: 1995; Method for determination of proline content in fruit and vegetable juices: spectrometric method.
• EN 1142: 1995; Method for determining the sulfate content of fruit and vegetable juices.
• EN 1143-1: 1997; Secure storage units. Requirements, classification and test methods for burglar resistance. Safes, vault doors and safes
• EN 1143-1 : 2005+A1 : 2009 ; Secure storage units. Requirements, classification and test methods for burglar resistance. Safes, ATM safes, vault doors and vault rooms
• EN 1143-1: 2012; Secure storage units. Requirements, classification and test methods for burglar resistance. Safes, ATM safes, vault doors and vault rooms
• EN 1143-2: 2014; Secure storage units. Requirements, classification and test methods for burglar resistance. deposit systems
• EN 1146: 2005; Respiratory protective devices. Self-contained open circuit compressed air breathing apparatus with a hood for escape. Requirements, testing, marking.
• EN 1148: 1999; heat exchangers. Water-to-water heat exchangers for district heating. Test procedures for generating performance data.
• EN 1149-1: 1996; Protective clothing. Electrostatic properties. Surface resistance (test methods and requirements)
• EN 1149-1: 2006; Protective clothing. Electrostatic properties. Test method for measurement of surface resistance
• EN 1149-2: 1997; Protective clothing. Electrostatic properties. Test method for measuring electrical resistance through a material (vertical resistance)
• EN 1149-5: 2008; Protective clothing. Electrostatic properties. Material performance and design requirements
• EN 1150 : 1999 ; Protective clothing. Visibility clothing for non-professional use. Test methods and requirements.

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.