EN European Norm Tests Part 162

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 62321-4: 2014; Determination of certain substances in electrotechnical products. Mercury in polymers, metals and electronics with CV-AAS, CV-AFS, ICP-OES and ICP-MS
• EN 62321-5: 2014; Determination of certain substances in electrotechnical products. Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals with AAS, AFS, ICP-OES and ICP-MS
• EN 62321-6: 2015; Determination of certain substances in electrotechnical products. Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography-mass spectrometry (GC-MS)
• EN 62321-3-1: 2014; Determination of certain substances in electrotechnical products. Scanning. Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry
• EN 62321-3-2: 2014; Determination of certain substances in electrotechnical products. Scanning. Total bromine in polymers and electronics by combustion. Ion Chromatography
• EN 62321-7-1 : 2015 ; Determination of certain substances in electrotechnical products. Determination of the presence of hexavalent chromium (Cr(VI)) in colorless and colored corrosion-protected coatings on metals by colorimetric method
• EN 62321: 2009; Electrotechnical products. Determination of the levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers).
• EN 62323: 2005; Dimensions of half-pot cores made of ferrite for inductive proximity switches.
• EN 62325-301: 2014; Energy market communication framework. Common Information Model for Markets (CIM) extensions
• EN 62325-351: 2013; Energy market communication framework. CIM Europe market model change profile
• EN 62325-351: 2016; Energy market communication framework. CIM Europe market model change profile
• EN 62325-450: 2013; Energy market communication framework. Profile and context modeling rules
• EN 62325-451-1 : 2013 ; Energy market communication framework. Approval business process and contextual model for the CIM European market
• EN 62325-451-2: 2014; Energy market communication framework. Timing business process and contextual model for the CIM European market
• EN 62325-451-3: 2014; Energy market communication framework. Contextual models for the transmission capacity allocation business process (open or closed auction) and the European market
• EN 62325-451-4 : 2015 ; Energy market communication framework. Mediation and mediation business process, contextual and assembly models for the European market
• EN 62325-451-5 : 2015 ; Energy market communication framework. Problem notification and status request business processes, contextual and assembly models for the European market
• EN 62325-451-6: 2016; Energy market communication framework. Publication of information about the market, contextual and assembly models for the European style market
• EN 62326-4: 1997; Printed boards. Rigid multi-layer printed boards with inter-layer connections. section properties
• EN 62326-20: 2016; Printed boards. Printed circuit boards for high-brightness LEDs
• EN 62326-4-1: 1997; Printed boards. Rigid multi-layer printed boards with inter-layer connections. Section properties. Ability detail specification. Performance levels, A, B and C
• EN 62327 : 2011 ; Radiation protection instrumentation. Hand-held instruments for the detection and identification of radionuclides and display of the ambient dose equivalent ratio from photon radiation.
• EN 62328-1: 2005; Multimedia home server systems. Changeable volume/file structure customization for broadcast receivers. General description and architecture
• EN 62328-2: 2005; Multimedia home server systems. Changeable volume/file structure customization for broadcast receivers. General record structure
• EN 62329-1: 2006; Heat shrink molded shapes. Definitions and general requirements
• EN 62329-2: 2006; Heat shrink molded shapes. test methods
• EN 62329-3-100: 2010; Heat shrink molded shapes. Specification requirements for shape dimensions, material requirements, and compatibility performance. Heat shrink molded shape sizes
• EN 62329-3-101: 2010; Heat shrink molded shapes. Specification requirements for shape dimensions, material requirements, and compatibility performance. Heat shrink molded shapes, polyolefin, semi-rigid, limited fire hazard, material requirements and system performance
• EN 62329-3-102: 2010; Heat shrink molded shapes. Specification requirements for shape dimensions, material requirements, and compatibility performance. Heat shrink elastomeric molded shapes, semi-rigid, material requirements and system performance
• EN 62333-1: 2006; Noise suppression board for digital devices and equipment. Definitions and general features
• EN 62333-2 : 2006+A1 : 2015 ; Noise suppression board for digital devices and equipment. Measurement methods
• EN 62333-3: 2010; Noise suppression board for digital devices and equipment. Characterization of noise suppression page parameters
• EN 62337 : 2007 ; Commissioning of electrical, instrumentation and control systems in the process industry. Specific stages and milestones.
• EN 62337 : 2012 ; Commissioning of electrical, instrumentation and control systems in the process industry. Specific stages and milestones.
• EN 62339-1 : 2007 ; Modular component interfaces for surface mount fluid delivery components. elastomeric seals
• EN 62340: 2010; Nuclear power plants. Instrumentation and control systems important to safety. Requirements for dealing with common cause failure (CCF).
• EN 62341-1-1: 2009; Organic light-emitting diode (OLED) displays. General features
• EN 62341-5-2: 2013; Organic light-emitting diode (OLED) displays. Mechanical endurance test methods
• EN 62341-5-3: 2013; Organic Light Emitting Diode (OLED) displays. Image bonding and lifetime measurement methods
• EN 62341-6-1: 2011; Organic light-emitting diode (OLED) displays. Measurement methods of optical and electro-optical parameters
• EN 62341-6-2: 2012; Organic light-emitting diode (OLED) displays. Measurement methods of visual quality and media performance
• EN 62341-6-3: 2012; Organic light-emitting diode (OLED) displays. Image quality measurement methods
• EN 62343-1: 2016; Dynamic modules. Performance standards. General conditions
• EN 62343-2: 2011; Dynamic modules. Reliability qualification
• EN 62343-2: 2014; Dynamic modules. Reliability qualification
• EN 62343-1-2: 2008; Dynamic modules. Performance standards. Braided dynamic chromatic dispersion stabilizer (Category C) for use in controlled environments
• EN 62343-1-3: 2013; Dynamic modules. Performance standards. Dynamic gain slope equalizer (disconnected)
• EN 62343-3-1: 2010; Dynamic modules. Performance specification templates. Dynamic channel equalizers
• EN 62343-3-1: 2016; Dynamic modules. Performance specification templates. Dynamic channel equalizers
• EN 62343-3-2: 2016; Dynamic modules. Performance specification templates. optical channel monitor
• EN 62343-3-3: 2014; Dynamic modules. Performance specification templates. Wavelength selector switches
• EN 62343-4-1: 2016; Dynamic modules. Software and hardware interface. 1 x 9 wavelength selector switch
• EN 62343-5-1: 2009; Dynamic modules. Test methods. Dynamic gain slope equalizer. Response time measurement
• EN 62343-5-1 : 2015 ; Dynamic modules. Test methods. Dynamic gain slope equalizer. Gain slope settling time measurement
• EN 62345: 2005; ID format for 50 mm magneto-optical disc system.
• EN 62347 : 2007 ; Guidance on system reliability specifications.
• EN 62351-3: 2014; Power systems management and related information exchange. Data and communication security. Network and system security. Profiles including TCP/IP
• EN 62353 : 2008 ; Medical electrical equipment. Repetitive testing and testing after repair of medical electrical equipment.
• EN 62353 : 2014 ; Medical electrical equipment. Repetitive testing and testing after repair of medical electrical equipment.
• EN 62356-1: 2004; Video recording. 12,65 mm TYPE D-11 format. tape recording
• EN 62356-2: 2004; Video recording. 12,65mm type D-11 format. Image compression and streaming
• EN 62356-3: 2004; Video recording. 12,65mm type D-11 format. Data replication over SDTI
• EN 62358 : 2013 ; Ferrite cores. Standard inductance factor and tolerance for hollow cores.
• EN 62359 : 2005 ; Ultrasonic. Field characterization. Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields.
• EN 62359 : 2011 ; Ultrasonic. Field characterization. Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields.
• EN 62361-2: 2013; Power systems management and related information exchange. Long-term interoperability. End-to-end quality codes for inspection control and data acquisition (SCADA)
• EN 62361-100: 2016; Power systems management and related information exchange. Long-term interoperability. From CIM profiles to XML schema mapping
• EN 62363: 2011; Radiation protection instrumentation. Portable photon pollution meters and monitors.
• EN 62364: 2013; Hydraulic machines. A guide to dealing with hydro-erosive erosion in Kaplan, Francis and Pelton turbines.
• EN 62365: 2005; Digital audio. Digital input-output interface. Digital audio transmission over asynchronous transfer mode (ATM) networks.
• EN 62365: 2009; Digital audio. Digital input-output interface. Digital audio transmission over asynchronous transfer mode (ATM) networks.
• EN 62366-1: 2015; Medical devices. Application of usability engineering to medical devices
• EN 62366 : 2008+A1 : 2015 ; Medical devices. Application of usability engineering to medical devices.
• EN 62368-1: 2014; Audio/video, information and communication technology equipment. Security requirements
• EN 62369-1: 2009; Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in a variety of applications in the 0 GHz to 300 GHz frequency range. Areas produced by devices used for electronic goods surveillance, radio frequency identification and similar systems
• EN 62373: 2006; Bias temperature stability test for metal oxide, semiconductor, field effect transistors (MOSFET).
• EN 62374-1: 2010; Semiconductor devices. Time dependent dielectric degradation (TDDB) test for intermetallic layers
• EN 62374: 2007; Semiconductor devices. Time dependent dielectric breakdown (TDDB) testing for gate dielectric films.
• EN 62375: 2004; Video systems (625/50 stages). Video and accompanying data using vertical spacing. Analogue interface.
• EN 62376 : 2011 ; Marine navigation and radiocommunication equipment and systems. Electronic mapping system (ECS). Operational and performance requirements, test methods and required test results.
• EN 62379-1 : 2007 ; Common control interface for networked digital audio and video products. general
• EN 62379-2: 2009; Common control interface for networked digital audio and video products. Sound
• EN 62379-3: 2015; Common control interface for networked digital audio and video products. Video
• EN 62379-7 : 2015 ; Common control interface for networked digital audio and video products. measurements
• EN 62379-5-1: 2014; Common control interface for networked digital audio and video products. Transmission over networks. general
• EN 62379-5-2: 2014; Common control interface for networked digital audio and video products. Transmission over networks. Signaling (TA4)
• EN 62381 : 2007 ; Automation systems in the process industry. Factory acceptance testing (FAT), site acceptance testing (SAT), and site integration testing (SIT).
• EN 62381: 2012; Automation systems in the process industry. Factory acceptance test (FAT), field acceptance test (SAT) and field integration test (SIT).
• EN 62382: 2007; Electrical and instrumentation loop control.
• EN 62382: 2013; Control systems in the process industry. Electrical and instrumentation loop control.
• EN 62384 : 2006+A1 : 2009 ; Electronic control gear powered by DC or AC for LED modules. Performance requirements.
• EN 62386-101: 2009; Digital addressable lighting interface. General Requirements. system
• EN 62386-101: 2014; Digital addressable lighting interface. General Requirements. System components
• EN 62386-102: 2009; Digital addressable lighting interface. General Requirements. control gear
• EN 62386-102: 2014; Digital addressable lighting interface. General Requirements. control gear
• EN 62386-103: 2014; Digital addressable lighting interface. General Requirements. control tools
• EN 62386-201 : 2009 ; Digital addressable lighting interface. Special requirements for the control gear. Fluorescent lamps (device type 0)
• EN 62386-201 : 2015 ; Digital addressable lighting interface. Special requirements for the control gear. Fluorescent lamps (device type 0)
• EN 62386-202: 2009; Digital addressable lighting interface. Special requirements for the control gear. Independent emergency lighting (device type 1)
• EN 62386-203: 2009; Digital addressable lighting interface. Special requirements for the control gear. Discharge lamps (excluding fluorescent lamps) (device type 2)

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.