EN European Norm Tests Part 93

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 15413 : 2011 ; Solid recovered fuels. Methods for preparation of test sample from laboratory sample.
• EN 15414-3: 2011; Solid recovered fuels. Determination of moisture content using the oven drying method. Moisture in the general analysis sample
• EN 15415-1: 2011; Solid recovered fuels. Determination of particle size distribution. Sieving method for small size particles
• EN 15415-2: 2012; Solid recovered fuels. Determination of particle size distribution. Maximum predicted length method for large particles (manual)
• EN 15415-3: 2012; Solid recovered fuels. Determination of particle size distribution. Image analysis method for large particles
• EN 15416-2: 2007; Adhesives for load-bearing wooden structures other than phenolic and aminoplastic. Test methods. Static load testing of multiple bond line specimens in compression cutting
• EN 15416-3 : 2007+A1 : 2010 ; Adhesives for load-bearing wooden structures other than phenolic and aminoplastic. Test methods . Creep deformation test in cyclic climatic conditions with specimens loaded with bending shears
• EN 15416-4: 2006; Adhesives for load-bearing wooden structures other than phenolic and aminoplastic. Test methods. Determination of open assembly time for one-component polyurethane adhesives
• EN 15416-5: 2006; Adhesives for load-bearing wooden structures other than phenolic and aminoplastic. Test methods. Determination of conventional pressing time
• EN 15417 : 2006 ; Gas fired central heating boilers. Special requirements for condensing boilers with a rated heat input greater than 70 kW but not exceeding 1000 kW.
• EN 15420 : 2010 ; Gas fired central heating boilers. Type C boilers with a rated heat input exceeding 70 kW but not exceeding 1000 kW.
• EN 15421: 2007; Packaging. Flexible aluminum pipes. Determination of adhesion of interior and exterior protective varnishes.
• EN 15422: 2008; Precast concrete products. Properties of glass fibers for reinforcement of mortars and concretes.
• EN 15423 : 2008 ; Ventilation for buildings. Fire prevention for air distribution systems in buildings.
• EN 15424 : 2007 ; Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for the development, verification and routine control of a sterilization process for medical devices.
• EN 15425 : 2008 ; Adhesives. One-component polyurethane for load-bearing wooden structures. Classification and performance requirements.
• EN 15426 : 2007 ; Candles. Specification for institutionalization behavior.
• EN 15427 : 2008+A1 : 2010 ; Railway applications. Wheel/rail friction management. Flange lubrication.
• EN 15428 : 2007 ; Soil improvers and growing medium. Determination of particle size distribution.
• EN 15429-2: 2012; Sweepers. Performance requirements and test methods
• EN 15429-3: 2015; Sweepers. Efficiency of particulate matter collection. Testing and Evaluation
• EN 15429-4: 2015; Sweepers. Symbols for operator controls and other displays
• EN 15430-1 : 2007+A1 : 2011 ; Winter and road service area maintenance equipment. Data collection and transmission. Vehicle data collection
• EN 15430-1 : 2015 ; Winter and road service area maintenance equipment. Data collection and transmission. In-vehicle data collection
• EN 15431 : 2008 ; Winter and road service area maintenance equipment. Power system and related controls. Interchangeability and performance requirements.
• EN 15432-1: 2011; Winter and road service area maintenance equipment. Front mounted equipment. Fixed front mounting plates
• EN 15432-2: 2013; Winter and road service area maintenance equipment. Front mounted equipment. Interchangeability in lifting systems
• EN 15432: 2008; Winter and road service area maintenance equipment. Front mounted equipment. interchangeability.
• EN 15433-1 : 2007 ; Transport loads. Measurement and evaluation of dynamic mechanical loads. General Requirements
• EN 15433-2: 2007; Transport loads. Measurement and evaluation of dynamic mechanical loads. Data collection and general requirements for measuring equipment
• EN 15433-3 : 2007 ; Transport loads. Measurement and evaluation of dynamic mechanical loads. Data editing for data validity check and evaluation
• EN 15433-4: 2007; Transport loads. Measurement and evaluation of dynamic mechanical loads. Data evaluation
• EN 15433-5 : 2007 ; Transport loads. Measurement and evaluation of dynamic mechanical loads. Derivation of test specifications
• EN 15433-6 : 2007 ; Transport loads. Measurement and evaluation of dynamic mechanical loads. Automatic recording systems to measure random shocks during transport monitoring
• EN 15433-6: 2016; Transport loads. Measurement and evaluation of dynamic-mechanical loads. Automatic recording systems to measure random shocks during transport monitoring
• EN 15434 : 2006+A1 : 2010 ; Glass in the building. Product standard for structural and/or ultraviolet resistant sealant (for use with structural sealant glass and/or insulating glass units with exposed gaskets).
• EN 15435 : 2008 ; Precast concrete products. Normal weight and lightweight concrete formwork blocks. Product features and performance.
• EN 15436-1 : 2008 ; Road service area maintenance equipment. terminology
• EN 15436-2: 2008; Road service area maintenance equipment. Performance evaluation
• EN 15436-4: 2009; Road service area maintenance equipment. Receipt of machines by users
• EN 15437-1 : 2009 ; Railway applications. Axle box condition monitoring. Interface and design requirements. Rail side equipment and wagon axle box
• EN 15437-2: 2012; Railway applications. Axle box condition monitoring. Interface and design requirements. Performance and design requirements of embedded systems for temperature monitoring
• EN 15440 : 2011 ; Solid recovered fuels. Methods for determination of biomass content.
• EN 15442: 2011; Solid recovered fuels. Sampling methods.
• EN 15443: 2011; Solid recovered fuels. Laboratory sample preparation methods.
• EN 15445 : 2008 ; Fugitive and widespread emissions concerning industrial sectors. Qualification of fugitive dust sources by inverse dispersion modeling.
• EN 15446: 2008; Fugitive and widespread emissions concerning industrial sectors. Measurement of fugitive steam emission from equipment and pipe leaks.
• EN 15450 : 2007 ; Heating systems in buildings. Design of heat pump heating systems.
• EN 15451 : 2008 ; Fertilizers. Determination of chelating agents. Determination of EDDHSA chelated iron by ion pair chromatography.
• EN 15452: 2008; Fertilizers. Determination of chelating agents. Determination of o,p-EDDHA chelated iron by reverse phase HPLC.
• EN 15456 : 2008 ; Heating boilers. Electric power consumption for heat generators. System limits. Measurements
• EN 15457 : 2007 ; Paints and varnishes. Laboratory method for testing the efficacy of film preservatives in an antifungal coating.
• EN 15457 : 2014 ; Paints and varnishes. Laboratory method for testing the efficacy of film preservatives in an antifungal coating.
• EN 15458 : 2007 ; Paints and varnishes. Laboratory method for testing the effectiveness of film protectors in a coating against algae.
• EN 15458 : 2014 ; Paints and varnishes. Laboratory method for testing the effectiveness of film protectors in a coating against algae.
• EN 15459 : 2007 ; Energy performance of buildings. Economic evaluation procedure for energy systems in buildings.
• EN 15460: 2007; water quality. Guide standard for the study of macrophytes in lakes.
• EN 15461 : 2008+A1 : 2010 ; Railway applications. Noise emission. Characterization of dynamic properties of track selections for noise measurements.
• EN 15466-1: 2009; Primers for cold and hot applied joint sealants. homogeneity determination
• EN 15466-2: 2009; Primers for cold and hot applied joint sealants. Determination of resistance to alkali
• EN 15466-3: 2009; Primers for cold and hot applied joint sealants. Determination of solid content and evaporation behavior of volatile substances
• EN 15467: 2014; Food processing machinery. Fish puffing and filleting machines. Safety and hygiene requirements.
• EN 15468 : 2007 ; Laminate floor coverings. Elements with a directly applied print and a resin surface layer. Specifications, requirements and test methods.
• EN 15468 : 2016 ; Laminate floor coverings. Elements with a directly applied print and a resin surface layer. Specifications, requirements and test methods.
• EN 15469 : 2007 ; Petroleum products. Test method for free water in liquefied petroleum gas by visual inspection.
• EN 15470 : 2007 ; Liquefied petroleum gases. Determination of dissolved residues. High temperature gas chromatographic method.
• EN 15471 : 2007 ; Liquefied petroleum gases. Determination of dissolved residues. High temperature gravimetric method.
• EN 15475 : 2009 ; Fertilizers. Determination of ammonia nitrogen.
• EN 15476: 2009; Fertilizers. Determination of nitric and ammonia nitrogen according to Devarda.
• EN 15477 : 2009 ; Fertilizers. Determination of water-soluble potassium content.
• EN 15478 : 2009 ; Fertilizers. Determination of total nitrogen in urea.
• EN 15479 : 2009 ; Fertilizers. Spectrophotometric determination of biurea in urea.
• EN 15482 : 2007 ; Chemicals used to treat water intended for human consumption. Sodium permanganate.
• EN 15482 : 2012 ; Chemicals used to treat water intended for human consumption. Sodium permanganate.
• EN 15483 : 2008 ; Ambient air quality. Near-ground atmospheric measurements with FTIR spectroscopy.
• EN 15484 : 2007 ; Ethanol as a mixing ingredient for gasoline. Determination of inorganic chloride. Potentiometric method.
• EN 15485: 2007; Ethanol as a mixing ingredient for gasoline. Determination of sulfur content. Wavelength dispersion X-ray fluorescence spectrometric method.
• EN 15486 : 2007 ; Ethanol as a mixing ingredient for gasoline. Determination of sulfur content. Ultraviolet fluorescence method.
• EN 15487 : 2007 ; Ethanol as a mixing ingredient for gasoline. Determination of phosphorus content. Ammonium molybdate spectrometric method.
• EN 15488 : 2007 ; Ethanol as a mixing ingredient for gasoline. Determination of copper content. Graphite furnace atomic absorption spectrometric method.
• EN 15489 : 2007 ; Ethanol as a mixing ingredient for gasoline. Determination of water content. Karl Fischer coulometric titration method.
• EN 15490: 2007; Ethanol as a mixing ingredient for gasoline. Determination of pHe.
• EN 15491 : 2007 ; Ethanol as a mixing ingredient for gasoline. Determination of total acidity. Color indicator titration method.
• EN 15492 : 2008 ; Ethanol as a mixing ingredient for gasoline. Determination of inorganic chloride and sulfate content. Ion chromatographic method.
• EN 15492 : 2012 ; Ethanol as a mixing ingredient for gasoline. Determination of inorganic chloride and sulfate content. Ion chromatographic method.
• EN 15495 : 2007 ; Non-destructive testing. acoustic emission. Inspection of metallic pressure equipment during proof testing. Zone location of AE sources.
• EN 15496 : 2008 ; Loops. Requirements and test methods for loop locks.
• EN 15497: 2014; Solid wood with structural finger joints. Performance requirements and minimum production requirements.
• EN 15498 : 2008 ; Precast concrete products. Wood chip concrete formwork blocks. Product features and performance.
• EN 15500 : 2008 ; Control for heating, ventilation and air conditioning applications. Electronic individual zone control equipment.
• EN 15501: 2013; Thermal insulation products for building equipment and industrial facilities. Expanded perlite (EP) and exfoliated vermiculite (EV) products were produced at the factory. Specification.
• EN 15501: 2015; Thermal insulation products for building equipment and industrial facilities. Expanded perlite (EP) and exfoliated vermiculite (EV) products were produced at the factory. Specification.
• EN 15502-1 : 2012+A1 : 2015 ; Gas fired boilers. General requirements and tests
• EN 15502-2-1: 2012; Gas fired central heating boilers. Special standard for type C devices and type B1000, B2 and B3 devices with a rated heat input not exceeding 5 kW
• EN 15502-2-2: 2014; Gas fired central heating boilers. Special standard for B1 type devices
• EN 15503 : 2009+A2 : 2015 ; Garden equipment. Garden blowers, vacuum cleaners and blower/vacuums. Safety.
• EN 15505 : 2008 ; Foodstuffs. Determination of trace elements. Determination of sodium and magnesium by flame atomic absorption spectrometry (AAS) after microwave digestion.
• EN 15507: 2008; Packaging. Transport packaging for dangerous goods. Comparative material testing of polyethylene grades.
• EN 15509: 2007; Road transport and traffic telematics. Electronic fee collection. Interoperability application profile for DSRC.
• EN 15509: 2014; Electronic fee collection. Interoperability application profile for DSRC.

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.