EN European Norm Tests Part 159

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 62044-2: 2005; Cores made of soft magnetic materials. Measurement methods. Magnetic properties at low excitation level
• EN 62047-1: 2006; Semiconductor devices. Micro-electromechanical devices. Terms and definitions
• EN 62047-1: 2016; Semiconductor devices. Micro-electromechanical devices. Terms and definitions
• EN 62047-2: 2006; Semiconductor devices. Micro-electromechanical devices. Tensile test method of thin film materials
• EN 62047-3: 2006; Semiconductor devices. Micro-electromechanical devices. Thin film standard test piece for tensile testing
• EN 62047-4: 2010; Semiconductor devices. Micro-electromechanical devices. General specification for MEMS
• EN 62047-5: 2011; Semiconductor devices. Micro-electromechanical devices. RF MEMS switches
• EN 62047-6: 2010; Semiconductor devices. Micro-electromechanical devices. Axial fatigue test methods of thin film materials
• EN 62047-7: 2011; Semiconductor devices. Micro-electromechanical devices. MEMS BAW filter and duplexer for radio frequency control and selection
• EN 62047-8: 2011; Semiconductor devices. Micro-electromechanical devices. Strip bending test method for measuring the tensile property of thin films
• EN 62047-9: 2011; Semiconductor devices. Micro-electromechanical devices. Wafer-to-wafer bond strength measurement for MEMS
• EN 62047-10: 2011; Semiconductor devices. Micro-electromechanical devices. Micro column compression test for MEMS materials
• EN 62047-11: 2013; Semiconductor devices. Micro-electromechanical devices. Test method for linear thermal expansion coefficients of individual materials for micro-electromechanical systems
• EN 62047-12: 2011; Semiconductor devices. Micro-electromechanical devices. Bending fatigue test method of thin film materials using resonance vibration of MEMS structures
• EN 62047-13 : 2012 ; Semiconductor devices. Micro-electromechanical devices. Bending and shear type test methods for measuring bond strength for MEMS structures
• EN 62047-14 : 2012 ; Semiconductor devices. Micro-electromechanical devices. Forming limit measurement method of metallic film materials
• EN 62047-16 : 2015 ; Semiconductor devices. Micro-electromechanical devices. Test methods for determining residual stresses of MEMS films. Wafer curvature and cantilever beam deflection methods
• EN 62047-18 : 2013 ; Semiconductor devices. Micro-electromechanical devices. Bending test methods of thin film materials
• EN 62047-19: 2013; Semiconductor devices. Micro-electromechanical devices. electronic compasses
• EN 62047-20: 2014; Semiconductor devices. Micro-electromechanical devices. gyroscopes
• EN 62047-21: 2014; Semiconductor devices. Micro-electromechanical devices. Test method for Poisson's ratio of thin-film MEMS materials
• EN 62047-22: 2014; Semiconductor devices. Micro-electromechanical devices. Electromechanical tensile test method for conductive thin films on flexible substrates
• EN 62047-25: 2016; Semiconductor devices. Micro-electromechanical devices. Silicone-based MEMS manufacturing technology. Tensile-compression and shear strength measurement method of micro bonding area
• EN 62047-26: 2016; Semiconductor devices. Micro-electromechanical devices. Description and measurement methods for micro trench and needle structures
• EN 62052-21: 2004; Electrical measuring equipment (ac). General requirements, tests and test conditions. Tariff and load control equipment
• EN 62052-31: 2016; Electrical measuring equipment (AC). General requirements, tests and test conditions. Product safety requirements and testing
• EN 62053-24: 2015; Electrical measuring equipment (ac). Special requirements. Static counters for reactive energy at fundamental frequency (classes 0,5 S, 1 S and 1)
• EN 62053-31: 1999; Electrical measuring equipment (ac). Special requirements. Pulse output devices for electromechanical and electronic meters (two-wire only)
• EN 62053-52: 2005; Electrical measuring equipment (AC). Special requirements. symbols
• EN 62053-61: 1999; Electrical measuring equipment (ac). Special requirements. Power consumption and voltage requirements
• EN 62055-31 : 2005 ; Electricity measurement. Paying system. Special requirements. Static payment meters for active energy (class 1 and 2)
• EN 62056-47: 2007; Electricity measurement. Data exchange for meter reading, tariff and load control. COSEM transport layers for IPv4 networks
• EN 62056-53: 2007; Electricity measurement. Data exchange for meter reading, tariff and load control. COSEM application layer
• EN 62056-61: 2007; Electricity measurement. Data exchange for meter reading, tariff and load control. object identification system (OBIS)
• EN 62056-62: 2007; Electricity measurement. Data exchange for meter reading, tariff and load control. interface classes
• EN 62056-3-1: 2014; Electrical measurement data exchange. DLMS/COSEM package. Use of local area networks on twisted pair with carrier signaling
• EN 62056-4-7: 2016; Electrical measurement data exchange. DLMS/COSEM package. DLMS/COSEM transport layer for IP networks
• EN 62056-5-3: 2014; Electrical measurement data exchange. DLMS/COSEM package. DLMS/COSEM application layer
• EN 62056-6-1: 2013; Electrical measurement data exchange. DLMS/COSEM package. Object Identification System (OBIS)
• EN 62056-6-1: 2016; Electrical measurement data exchange. DLMS/COSEM package. Object Identification System (OBIS)
• EN 62056-6-2: 2013; Electrical measurement data exchange. DLMS/COSEM package. COSEM interface classes
• EN 62056-7-5: 2016; Electrical measurement data exchange. DLMS/COSEM package. Local data transmission profiles for Local Area Networks (LN)
• EN 62056-7-6: 2013; Electrical measurement data exchange. DLMS/COSEM package. 3-layer, connection-oriented HDLC-based communication profile
• EN 62056-8-3: 2013; Electrical measurement data exchange. DLMS/COSEM package. Communication profile for PLC S-FSK neighbor networks
• EN 62056-9-7: 2013; Electrical measurement data exchange. DLMS/COSEM package. Communication profile for TCP-UDP/IP networks
• EN 62056-1-0 : 2015 ; Electrical measurement data exchange. DLMS/COSEM package. Intelligent measurement standardization framework
• EN 62058-11 : 2010 ; Electrical measuring equipment (ac). Acceptance inspection. General acceptance inspection methods
• EN 62058-21 : 2010 ; Electrical measuring equipment (ac). Acceptance inspection. Special requirements for electromechanical meters for active energy (classes 0,5, 1 and 2 and indexes of classes A and B)
• EN 62058-31 : 2010 ; Electrical measuring equipment (ac). Acceptance inspection. Special requirements for static meters for active energy (classes 0,2 S, 0,5 S, 1 and 2 and class indexes A, B and C)
• EN 62059-41: 2006; Electrical measuring equipment. Reliability Reliability estimate
• EN 62059-32-1 : 2012 ; Electrical measuring equipment. Reliability durability Testing the stability of metrological properties by applying elevated temperature
• EN 62059-31-1:2008; Electrical measuring equipment. Reliability Accelerated reliability testing. high temperature and humidity
• EN 62061 : 2005+A2 : 2015 ; Machinery safety. Functional safety of safety-related electrical, electronic and programmable electronic control systems.
• EN 62065: 2014; Marine navigation and radiocommunication equipment and systems. Tracking control systems. Operational and performance requirements, test methods and required test results.
• EN 62068: 2013; Electrical insulation materials and systems. General method for evaluating electrical endurance under repetitive voltage pulses.
• EN 62071-1 : 2006 ; A helical scan compressed digital videocassette system using 6,35mm magnetic tape. Format D-7 ; VTR features
• EN 62071-2: 2006; A helical scan compressed digital videocassette system using 6,35mm magnetic tape. Format D-7 ; Compression format
• EN 62071-3: 2006; A helical scan compressed digital videocassette system using 6,35mm magnetic tape. Format D-7 ; Data stream format
• EN 62074-1: 2009; Fiber optic interconnect devices and passive components. Fiber optic WDM devices. General specification
• EN 62074-1: 2014; Fiber optic interconnect devices and passive components. Fiber optic WDM devices. General specification
• EN 62075 : 2008 ; Audio/video, information and communication technology equipment. Environmentally friendly design.
• EN 62075 : 2012 ; Audio/video, information and communication technology equipment. Environmentally friendly design.
• EN 62076: 2006; Industrial electrical heating installations. Test methods for induction channel and induction crucible furnaces.
• EN 62077 : 2010 ; Fiber optic interconnect devices and passive components. Fiber optic circulators. General specification.
• EN 62077 : 2016 ; Fiber optic interconnect devices and passive components. Fiber optic circulators. General specification.
• EN 62080 : 2009+A2 : 2015 ; Audible signaling devices for household and similar purposes.
• EN 62083: 2001; Medical electrical equipment. Requirements for the safety of radiotherapy treatment planning systems.
• EN 62083: 2009; Medical electrical equipment. Requirements for the safety of radiotherapy treatment planning systems.
• EN 62087-1: 2016; Audio, video and related equipment. Determination of power consumption. general
• EN 62087-3: 2016; Audio, video and related equipment. Determination of power consumption. television sets
• EN 62087-4: 2016; Audio, video and related equipment. Determination of power consumption. video recording equipment
• EN 62087-5: 2016; Audio, video and related equipment. Determination of power consumption. Set-top boxes (STB)
• EN 62087-6: 2015; Audio, video and related equipment. Determination of power consumption. audio equipment
• EN 62087: 2003; Measurement methods for power consumption of audio, video and related equipment.
• EN 62087: 2009; Measurement methods for power consumption of audio, video and related equipment.
• EN 62087: 2012; Measurement methods for power consumption of audio, video and related equipment.
• EN 62093: 2005; System balance components for photovoltaic systems. Design competence natural environments.
• EN 62097: 2009; Hydraulic machines, radial and axial. Performance conversion method from model to prototype.
• EN 62105: 2002; Digital audio broadcasting system. Features of the receiver data interface (RDI).
• EN 62106: 2009; Radio data system (RDS) specifications for VHF/FM audio broadcasting in the frequency range 87,5 MHz to 108,0 MHz.
• EN 62106: 2015; Radio data system (RDS) specifications for VHF/FM audio broadcasting in the frequency range 87,5 MHz to 108,0 MHz.
• EN 62108 : 2008 ; Concentrator photovoltaic (CPV) modules and assemblies. Design qualification and type approval.
• EN 62109-1: 2010; Safety of power converters for use in photovoltaic power systems. General Requirements
• EN 62109-2: 2011; Safety of power converters for use in photovoltaic power systems. Special requirements for inverters
• EN 62110: 2009; Electric and magnetic field levels produced by AC power systems. Measurement procedures for public exposure.
• EN 62116 : 2011 ; Test procedure of island formation prevention measures for grid-tied photovoltaic inverters.
• EN 62116: 2014; Utility-connected photovoltaic inverters. Test procedure of islanding prevention measures.
• EN 62124: 2005; Photovoltaic (PV) stand-alone systems. Design Verification.
• EN 62127-1 : 2007+A1 : 2013 ; Ultrasonic. Hydrophones. Measurement and characterization of medical ultrasonic fields up to 40 MHz
• EN 62127-2 : 2007+A1 : 2013 ; Ultrasonic. Hydrophones. Calibration for ultrasonic fields up to 40 MHz
• EN 62127-3 : 2007+A1 : 2013 ; Ultrasonic. Hydrophones. Characteristics of hydrophones for ultrasonic fields up to 40 MHz
• EN 62129-1: 2016; Calibration of wavelength/optical frequency measuring devices. Optical spectrum analyzers
• EN 62129-2: 2011; Calibration of wavelength/optical frequency measuring devices. Michelson interferometer single wavelength meter
• EN 62129: 2006; Calibration of optical spectrum analyzers.
• EN 62132-1: 2006; Integrated circuits. Measurement of electromagnetic immunity, 150 kHz - 1 GHz. General terms and definitions
• EN 62132-1: 2016; Integrated circuits. Measurement of electromagnetic immunity. General terms and definitions
• EN 62132-2: 2011; Integrated circuits. Measurement of electromagnetic immunity. Measurement of radiated immunity. TEM cell and broadband TEM cell method
• EN 62132-3: 2007; Integrated circuits. Measurement of electromagnetic immunity, 150 kHz - 1 GHz. Bulk current injection (BCI) method
• EN 62132-4: 2006; Integrated circuits. Measurement of electromagnetic immunity. 150 kHz to 1 GHz. Direct RF power injection method
• EN 62132-5: 2006; Integrated circuits. Measurement of electromagnetic immunity, 150 kHz - 1 GHz. Bench Faraday cage method
• EN 62132-8: 2012; Integrated circuits. Measurement of electromagnetic immunity. Measurement of radiated immunity. IC strip method
• EN 62133: 2013; Secondary cells and batteries containing alkaline or other non-acid electrolytes. Safety requirements for portable sealed secondary cells and batteries made from them for use in portable applications.
• EN 62134-1: 2009; Fiber optic interconnect devices and passive components. Fiber optic covers. General specification
• EN 62135-1 : 2008 ; Resistance welding equipment. Safety requirements for design, manufacture and installation
• EN 62135-1 : 2015 ; Resistance welding equipment. Safety requirements for design, manufacture and installation
• EN 62135-2: 2008; Resistance welding equipment. Electromagnetic compatibility (EMC) requirements
• EN 62135-2: 2015; Resistance welding equipment. Electromagnetic compatibility (EMC) requirements
• EN 62137-3: 2012; Electronic assembly technology. Selection guide of environmental and durability test methods for solder joints
• EN 62137-4: 2014; Electronic assembly technology. Durability test methods for solder connection of field array type package surface mount devices
• EN 62137-1-1: 2007; Surface mount technology. Environmental and durability test methods for surface mount solder joint. tensile strength test
• EN 62137-1-2: 2007; Surface mount technology. Environmental and durability test methods for surface mount solder joint. Shear strength test
• EN 62137-1-3: 2009; Surface mount technology. Environmental and durability test methods for surface mount solder joint. cyclic drop test
• EN 62137-1-4: 2009; Surface mount technology. Environmental and durability test methods for surface mount solder joint. cyclic bending test
• EN 62137-1-5: 2009; Surface mount technology. Environmental and durability test methods for surface mounted solder joints. Mechanical shear fatigue test
• EN 62141: 2006; A helical scan digital videotape recording format that uses 12,65 mm magnetic tape and includes MPEG-4 compression. Type the D-16 format.
• EN 62146-1 : 2014+A1 : 2016 ; Rating capacitors for high voltage alternating current circuit breakers. general
• EN 62148-2: 2011; Fiber optic active components and devices. Package and interface standards. SFF 10-pin transceivers
• EN 62148-3: 2011; Fiber optic active components and devices. Package and interface standards. SFF 20-pin transceivers
• EN 62148-11 : 2009 ; Fiber optic active components and devices. Package and interface standards. 14-pin active device modules
• EN 62148-15 : 2010 ; Fiber optic active components and devices. Package and interface standards. Laser packages emitting discrete vertical cavity surface
• EN 62148-15 : 2014 ; Fiber optic active components and devices. Package and interface standards. Laser packages emitting discrete vertical cavity surface
• EN 62148-17: 2014; Fiber optic active components and devices. Package and interface standards. Transmitter and receiver components with dual coaxial RF connectors
• EN 62148-18 : 2015 ; Fiber optic active components and devices. Package and interface standards. 40 Gbit/s serial transmitter and receiver components for use with LC connector interface
• EN 62149-1: 2012; Fiber optic active components and devices. Performance standards. General and guidance
• EN 62149-2: 2009; Fiber optic active components and devices. Performance standards. Laser devices emitting 850 nm discrete vertical cavity surface
• EN 62149-2: 2014; Fiber optic active components and devices. Performance standards. Laser devices emitting 850 nm discrete vertical cavity surface
• EN 62149-3: 2014; Fiber optic active components and devices. Performance standards. Laser diode transmitters integrated in the modulator for 2,5 Gbit/s to 40 Gbit/s fiber optic transmission systems
• EN 62149-4: 2010; Fiber optic active components and devices. Performance standards. 1300 nm fiber optic transceivers for Gigabit Ethernet application
• EN 62149-5: 2011; Fiber optic active components and devices. Performance standards. ATM-PON transceivers with LD driver and CDR ICs
• EN 62149-7: 2012; Fiber optic active components and devices. Performance standards. Surface emitting laser devices with 1310 nm separate vertical gaps
• EN 62149-8: 2014; Fiber optic active components and devices. Performance standards. Seeded reflective semiconductor optical amplifier devices
• EN 62149-9: 2014; Fiber optic active components and devices. Performance standards. Seeded reflective semiconductor optical amplifier transceivers
• EN 62150-1 : 2005 ; Fiber optic active components and devices. Test and measurement procedures. General and guidance
• EN 62150-2: 2004; Fiber optic active components and devices. Test and measurement procedures. ATM-PON transceivers
• EN 62150-2: 2011; Fiber optic active components and devices. Test and measurement procedures. ATM-PON transceivers
• EN 62150-3: 2012; Fiber optic active components and devices. Test and measurement procedures. Optical power variation caused by mechanical deterioration at optical sockets and transceiver interfaces
• EN 62150-3: 2015; Fiber optic active components and devices. Test and measurement procedures. Optical power variation caused by mechanical deterioration at optical sockets and transceiver interfaces
• EN 62153-4-7 : 2006 ; Metallic communication cables test methods. Electromagnetic compatibility (EMC). Test method for measuring transfer impedance and shielding or coupling attenuation. tube method
• EN 62153-4-7: 2016; Metallic communication cable test methods. Electromagnetic compatibility (EMC). Test method for measuring transfer impedance Z$dT and shielding attenuation a$ds or coupling attenuation a$dc up to and above 3 GHz. Triaxial tube in tube method
• EN 62194: 2005; A method for evaluating the thermal performance of enclosures.
• EN 62196-1 : 2012+A12 : 2014 ; Plugs, sockets, vehicle connectors and vehicle jacks. Conductive charging of electric vehicles. General Requirements
• EN 62196-1: 2014; Plugs, sockets, vehicle connectors and vehicle jacks. Conductive charging of electric vehicles. General Requirements
• EN 62196-2 : 2012+A12 : 2014 ; Plugs, sockets, vehicle connectors and vehicle jacks. Conductive charging of electric vehicles. Dimensional compatibility and interchangeability requirements for AC pin and contact tube accessories
• EN 62196-3: 2014; Plugs, sockets, vehicle connectors and vehicle jacks. Conductive charging of electric vehicles. Dimensional compatibility and interchangeability requirements for vehicle couplers with DC and ac/dc pin and contact tube
• EN 62197-1 : 2006 ; Connectors for electronic equipment. Quality assessment requirements. General specification
• EN 62198: 2014; Risk management in projects. Application guidelines.
• EN 62208: 2011; Empty enclosures for low voltage switchgear and control gear. General Requirements.
• EN 62209-1: 2006; Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices. Human models, instrumentation and procedures. Procedure for determining the specific absorption rate (SAR) for handheld devices used near the ear (frequency range 300 MHz to 3 GHz)
• EN 62209-1: 2016; Measurement procedure for the assessment of the specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices. Devices used close to the ear (frequency range from 300 MHz to 6 GHz)
• EN 62209-2: 2010; Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices. Human models, instrumentation and procedures. Procedure for determining the specific absorption rate (SAR) for wireless communication devices used near the human body (frequency range of 30 MHz to 6 GHz)
• EN 62215-3: 2013; Integrated circuits. Measurement of impulse immunity. Asynchronous temporary injection method
• EN 62216: 2011; Digital terrestrial television receivers for the DVB-T system.
• EN 62217 : 2006 ; Polymeric insulators for indoor and outdoor use with a rated voltage of more than 1000 V. General definitions, test methods and acceptance criteria.
• EN 62217 : 2013 ; Polymeric HV insulators for indoor and outdoor use. General definitions, test methods and acceptance criteria.
• EN 62220-1-1 : 2015 ; Medical electrical equipment. Features of digital x-ray imaging devices. Determination of detective quantum efficiency. Detectors used in radiographic imaging
• EN 62220-1-2: 2007; Medical electrical equipment. Features of digital X-ray imaging devices. Determination of detective quantum efficiency. Detectors used in mammography
• EN 62220-1-3: 2008; Medical electrical equipment. Features of digital X-ray imaging devices. Determination of detective quantum efficiency. Detectors used in dynamic imaging
• EN 62223: 2009; Insulators. Glossary of terms and definitions.
• EN 62226-1: 2005; Exposure to electric or magnetic fields in the low and medium frequency range. Methods for calculating the current density and internal electric field induced in the human body. general
• EN 62226-2-1: 2005; Exposure to electric or magnetic fields in the low and medium frequency range. Methods for calculating current density and internal electric field induced in the human body. exposure to magnetic fields
• EN 62226-3-1: 2007; Exposure to electric or magnetic fields in the low and medium frequency range. Methods for calculating the current density and internal electric field induced in the human body. Exposure to electric fields. Analytical and 2D numerical models
• EN 62227 : 2008+A1 : 2013 ; Multimedia home server systems. Digital rights authorization code.
• EN 62230 : 2007+A1 : 2014 ; Electric cables. Spark test method.
• EN 62231-1: 2016; Composite station post insulators for substations with AC voltages from 1000 V to 245 kV. Dimensional, mechanical and electrical properties
• EN 62231: 2007; Composite station post insulators for substations with ac voltages greater than 245 V up to 1000 kV. Definitions, test methods and acceptance criteria.
• EN 62233 : 2008 ; Measurement methods for electromagnetic fields of household appliances and similar devices in relation to human exposure.
• EN 62237 : 2005 ; Live work. Insulating hoses with fittings for use with hydraulic tools and equipment.
• EN 62244: 2011; Radiation protection instrumentation. Radiation monitors installed for the detection of radioactive and special nuclear materials at national borders.
• EN 62246-2: 2008; Reed contact units. Heavy duty reed switches
• EN 62246-1-1: 2013; Reed switches. General specification. Quality assessment
• EN 62253: 2011; Photovoltaic pumping systems. Design competence and performance measures.
• EN 62256 : 2008 ; Hydraulic turbines, storage pumps and pump turbines. Rehabilitation and performance improvement.
• EN 62258-1 : 2005 ; Semiconductor mold products. Requirements for supply and use
• EN 62258-1 : 2010 ; Semiconductor mold products. Supply and use
• EN 62258-2: 2005; Semiconductor mold products. Exchange data formats
• EN 62258-2: 2011; Semiconductor mold products. Exchange data formats
• EN 62258-5: 2006; Semiconductor mold products. Information requirements for electrical simulation
• EN 62258-6: 2006; Semiconductor mold products. Information requirements for thermal simulation
• EN 62261-1 : 2006 ; Television metadata. Metadata dictionary structure
• EN 62261-2: 2006; TV METADATA. Data encoding protocol using key-length-value
• EN 62262: 2002; Degrees of protection against external mechanical impacts provided by electrical equipment enclosures (IK code).
• EN 62264-1 : 2008 ; Enterprise control system integration. Models and terminology
• EN 62264-1 : 2013 ; Enterprise control system integration. Models and terminology
• EN 62264-2: 2008; Enterprise control system integration. Object model properties
• EN 62264-2 : 2013 ; Enterprise control system integration. Objects and attributes for enterprise control system integration
• EN 62264-3: 2007; Enterprise control system integration. Activity models of manufacturing operations management
• EN 62264-4: 2016; Enterprise control system integration. Object model attributes for manufacturing operations management integration
• EN 62264-5: 2012; Enterprise system integration. Business-to-production processes
• EN 62264-5: 2016; Enterprise control system integration. Business-to-production processes
• EN 62267: 2009; Railway applications. Automated inner city guided transport (AUGT). Security requirements.
• EN 62271-1 : 2008+A1 : 2011 ; High voltage switchgear and control gear. Common features
• EN 62271-3: 2006; High voltage switchgear and control gear. Digital interfaces based on IEC 61850
• EN 62271-3: 2015; High voltage switchgear and control gear. Digital interfaces based on IEC 61850
• EN 62271-4: 2013; High voltage switchgear and control gear. Processing procedures for sulfur hexafluoride (SF$d6) and its mixtures
• EN 62271-100 : 2009+A1 : 2012 ; High voltage switchgear and control equipment . Alternating current circuit breakers
• EN 62271-101 : 2006+A1 : 2010 ; High voltage switchgear and control gear. synthetic test
• EN 62271-101 : 2013 ; High voltage switchgear and control gear. synthetic test
• EN 62271-103 : 2011 ; High voltage switchgear and control gear. Switches for rated voltages from 1 kV to 52 kV and inclusive
• EN 62271-104 : 2009 ; High voltage switchgear and control gear. Alternating current switches for rated voltages of 52 kV and above
• EN 62271-104 : 2015 ; High voltage switchgear and control gear. Alternating current switches for rated voltages higher than 52 kV

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.