EN European Norm Tests Part 7

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 433: 1994; Flexible floor coverings. Determination of the indentation remaining after static loading.
• EN 434 : 1994 ; Flexible floor coverings. Dimensional stability and curl determination after heat exposure.
• EN 435: 1994; Flexible floor coverings. Determination of flexibility.
• EN 436: 1994; Flexible floor coverings. Determination of density.
• EN 437: 1994; Specification for test gases, test pressures and instrument categories for gas appliances.
• EN 438-1: 1991; Decorative high-pressure laminates (HPL) sheets based on thermosetting resins. Features
• EN 438-1: 2005; High pressure decorative laminates (HPL). Sheets (often called laminates) based on thermosetting resins. Introduction and general information
• EN 438-1: 2016; High pressure decorative laminates (HPL). Sheets (often called laminates) based on thermosetting resins. Introduction and general information
• EN 438-2: 1991; Decorative high-pressure laminates (HPL) sheets based on thermosetting resins. determination of features
• EN 438-2: 2005; High pressure decorative laminates (HPL). Sheets (often called laminates) based on thermosetting resins. determination of features
• EN 438-2: 2016; High pressure decorative laminates (HPL). Sheets (often called laminates) based on thermosetting resins. determination of features
• EN 438-3: 2005; High pressure decorative laminates (HPL). Sheets (often called laminates) based on thermosetting resins. Classification and specifications for laminates thinner than 2 mm for bonding to supporting substrates
• EN 438-3: 2016; High pressure decorative laminates (HPL). Sheets (often called laminates) based on thermosetting resins. Classification and specifications for laminates thinner than 2 mm for bonding to supporting substrates
• EN 438-4: 2005; High pressure decorative laminates (HPL). Sheets (often called laminates) based on thermosetting resins. Classification and specifications for compact laminates 2 mm thick and larger
• EN 438-4: 2016; High pressure decorative laminates (HPL). Sheets (often called laminates) based on thermosetting resins. Classification and specifications for compact laminates 2 mm thick and larger
• EN 438-5: 2005; High pressure decorative laminates (HPL). Sheets (often called laminates) based on thermosetting resins. Classification and specifications for flooring grade laminates less than 2 mm thick for bonding to supporting surfaces
• EN 438-5: 2016; High pressure decorative laminates (HPL). Sheets (often called laminates) based on thermosetting resins. Classification and specifications for flooring grade laminates less than 2 mm thick for bonding to supporting surfaces
• EN 438-6: 2005; Decorative high-pressure laminates (HPL) sheets based on thermosetting resins. Classification and specifications for outer class compact laminates of 2 mm and thicker
• EN 438-6: 2016; High pressure decorative laminates (HPL). Sheets (often called laminates) based on thermosetting resins. Classification and specifications for exterior compact laminates of 2 mm and thicker
• EN 438-7: 2005; High pressure decorative laminates (HPL). Sheets (often called laminates) based on thermosetting resins. Compact laminate and HPL composite panels for interior and exterior wall and ceiling cladding
• EN 438-8: 2009; High pressure decorative laminates (HPL). Sheets (often called laminates) based on thermosetting resins. Classification and specifications for design laminates
• EN 438-9 : 2010+A1 : 2013 ; High pressure decorative laminates (HPL). Sheets based on thermosetting resins (often called Laminates). Classification and specifications for alternative core laminates
• EN 439: 1994; Welding consumables. Shielding gases for arc welding and cutting.
• EN 440: 1995; Welding consumables. Wire electrodes and deposits for gas shielded metal arc welding of unalloyed and fine grain steels. classification
• EN 441-1: 1995; Refrigerated display cases. Terms and definitions
• EN 441-2: 1995; Refrigerated display cases. General mechanical and physical requirements
• EN 441-3: 1995; Refrigerated display cases. Linear dimensions, areas and volumes
• EN 441-4: 1995; Refrigerated display cases. General test conditions
• EN 441-5: 1996; Refrigerated display cases. temperature test
• EN 441-6: 1995; Refrigerated display cases. Classification by temperature
• EN 441-7: 1995; Refrigerated display cases. defrost test
• EN 441-8: 1995; Refrigerated display cases. water vapor condensation test
• EN 441-9: 1995; Refrigerated display cases. Electrical energy consumption test
• EN 441-10: 1995; Refrigerated display cases. Absence of smell and taste test
• EN 441-11: 1995; Refrigerated display cases. Installation, maintenance and user manual
• EN 441-12: 1997; Refrigerated display cases. Measuring the heat output rate of the cabinets when the condensing unit is away from the cabinet
• EN 442-1: 1996; Technical specifications for radiators and convectors. Technical specifications and requirements
• EN 442-1: 2014; Radiators and convectors. Technical specifications and requirements
• EN 442-2: 1997; Technical specifications for radiators and convectors. Test methods and grading
• EN 442-2: 2014; Radiators and convectors. Test methods and grading
• EN 442-3: 1997; Technical specifications for radiators and convectors. Evaluation of eligibility
• EN 443 : 2008 ; Helmets for fire fighting in buildings and other structures.
• EN 444 : 1994 ; Non-destructive testing. General principles for radiographic examination of metallic materials with X and gamma rays.
• EN 445: 1997; Mortar for pre-tensioning of tendons. Test methods.
• EN 445: 2007; Mortar for pre-tensioning of tendons. Test methods.
• EN 446: 1997; Mortar for pre-tensioning of tendons. Grouting operations.
• EN 446: 2007; Mortar for pre-tensioning of tendons. Grouting operations.
• EN 447: 1997; Mortar for pre-tensioning of tendons. Specification for joint mortar.
• EN 447: 2007; Mortar for pre-tensioning of tendons. Basic requirements.
• EN 448: 1995; Pre-insulated bonded pipe systems for underground hot water networks. Fittings of steel service pipes, polyurethane thermal insulation and outer coating of high density polyethylene.
• EN 448: 2009; District heating pipes. Pre-insulated connected pipe systems for directly buried hot water networks. Assembling assemblies of steel service pipes, polyurethane thermal insulation and polyethylene outer coating.
• EN 448: 2015; District heating pipes. Pre-insulated connected pipe systems for directly buried hot water networks. Assembling assemblies of steel service pipes, polyurethane thermal insulation and polyethylene outer coating.
• EN 449: 1997; Specification for special liquefied petroleum gas devices. Domestic flueless space heaters (including radiative catalytic combustion heaters).
• EN 450-1 : 2005+A1 : 2007 ; Fly ash for concrete. Definition, features and eligibility criteria
• EN 450-1: 2012; Fly ash for concrete. Definition, features and eligibility criteria
• EN 450-2: 2005; Fly ash for concrete. conformity assessment
• EN 450: 1995; Fly ash for concrete. Definitions, requirements and quality control.
• EN 451-1: 1995; Fly ash testing method. Determination of free calcium oxide content
• EN 451-2: 1995; Fly ash testing method. Fineness determination by wet sieving
• EN 452: 1996; Change bodies. Replace the bodies of Class A. Dimensions and general requirements.
• EN 453 : 2000+A1 : 2009 ; Food processing machinery. Dough mixers. Safety and hygiene requirements.
• EN 453: 2014; Food processing machinery. Dough mixers. Safety and hygiene requirements.
• EN 454 : 2000+A1 : 2009 ; Food processing machinery. Planetary mixers. Safety and hygiene requirements.
• EN 454: 2014; Food processing machinery. Planetary mixers. Safety and hygiene requirements.
• EN 455-1 : 1994 ; Disposable medical gloves. Specification for getting rid of holes
• EN 455-2: 1995; Disposable medical gloves. Specification for physical properties
• EN 455-2 : 2000 ; Disposable medical gloves. Requirements and tests for physical properties
• EN 455-2 : 2009+A2 : 2013 ; Disposable medical gloves. Requirements and tests for physical properties
• EN 455-2 : 2015 ; Disposable medical gloves. Requirements and tests for physical properties
• EN 455-3 : 2000 ; Disposable medical gloves. Requirements and tests for biological evaluation
• EN 455-3 : 2006 ; Disposable medical gloves. Requirements and tests for biological evaluation
• EN 455-3 : 2015 ; Disposable medical gloves. Requirements and tests for biological evaluation
• EN 455-4: 2009; Disposable medical gloves. Requirements and tests for determining shelf life
• EN 456: 1991; Method for determining the flash point of paints, varnishes and related products by the rapid equilibrium method.
• EN 457 : 1992 ; Machinery safety. Auditory distress signals. General requirements, design and testing.
• EN 458 : 1994 ; Hearing protectors. Recommendations for selection, use, care and maintenance. Guidance document.
• EN 458 : 2016 ; Hearing protectors. Recommendations for selection, use, care and maintenance. Guidance document.
• EN 459-1 : 2010 ; The building is lime. Definitions, features and eligibility criteria
• EN 459-1 : 2015 ; The building is lime. Definitions, features and eligibility criteria
• EN 460: 1994; Durability of wood and wood-based products. Natural durability of solid wood. Guidance on durability requirements for wood to be used in hazard classes.
• EN 461: 1999; Specification for special liquefied petroleum gas devices. Flueless, non-domestic space heaters not exceeding 10 kW.
• EN 462-1 : 1994 ; Non-destructive testing. Image quality of radiographs. Image quality indicators (cable type). Determining the image quality value
• EN 462-2 : 1994 ; Non-destructive testing. Image quality of radiographs. Image quality indicators (step/hole type). Determining the image quality value
• EN 462-3: 1997; Non-destructive testing. Image quality of radiographs. Image quality classes for ferrous metals
• EN 462-4: 1995; Non-destructive testing. Image quality of radiographs. Experimental evaluation of image quality values ​​and image quality tables
• EN 462-5: 1996; Non-destructive testing. Image quality of radiographs. Image quality indicators (duplex wire type), determination of image sharpness value
• EN 463: 1995; Protective clothing. Protection against liquid chemicals. Test method. Determination of resistance to penetration by a jet of liquid (jet test).
• EN 464 : 1994 ; Protective clothing. Protection against liquid and gaseous chemicals, including liquid aerosols and solid particles. Test method. Determination of tightness of gas-tight suits (Internal Pressure Test).
• EN 465: 1995; Protective clothing. Protection against liquid chemicals. Performance requirements (type 4 equipment) for chemical protective clothing with spray-tight connections between different parts of the suit.
• EN 466-1: 1995; Protective clothing. Protection against liquid chemicals. Performance requirements for chemical protective clothing with liquid-tight connections between different parts of the suit (type 3 equipment)
• EN 467: 1995; Protective clothing. Protection against liquid chemicals. Performance requirements for clothing providing protection to parts of the body.
• EN 468: 1995; Protective clothing for use against liquid chemicals. Test method. Determination of resistance to penetration by spraying (Spray Test).
• EN 469: 1995; Protective clothing for firefighters. Requirements and test methods for protective clothing for fire fighting.
• EN 469 : 2005 ; Protective clothing for firefighters. Performance requirements for protective clothing for firefighting.
• EN 469 : 2014 ; Protective clothing for firefighters. Performance requirements for protective clothing for firefighting.
• EN 470-1: 1995; Protective clothing for use in welding and similar operations. General Requirements
• EN 471: 1994; Specification for high-visibility warning clothing.
• EN 473: 1993; General principles for the qualification and certification of NDT personnel.
• EN 473:2000; Non-destructive testing. Qualification and certification of NDT personnel l. General Principles.
• EN 473: 2008; Non-destructive testing. Qualification and certification of NDT personnel. General Principles.

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.