EN European Norm Tests Part 63

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 12309-4: 2014; Gas-fired sorption devices for heating and/or cooling with a net heat input not exceeding 70 kW. Test methods
• EN 12309-5: 2014; Gas-fired sorption devices for heating and/or cooling with a net heat input not exceeding 70 kW. Requirements
• EN 12309-6: 2014; Gas-fired sorption devices for heating and/or cooling with a net heat input not exceeding 70 kW. Calculation of seasonal performances
• EN 12309-7: 2014; Gas-fired sorption devices for heating and/or cooling with a net heat input not exceeding 70 kW. Special provisions for hybrid devices
• EN 12310-1 : 2000 ; Flexible sheets for waterproofing. Determination of tear resistance (nail handle). bitumen sheets for roof waterproofing
• EN 12311-1 : 2000 ; Flexible sheets for waterproofing. Determination of tensile properties. bitumen sheets for roof waterproofing
• EN 12311-2: 2010; Flexible sheets for waterproofing. Determination of tensile properties. Plastic and rubber sheets for roof waterproofing
• EN 12311-2: 2013; Flexible sheets for waterproofing. Determination of tensile properties. Plastic and rubber sheets for roof waterproofing
• EN 12312-1 : 2013 ; Aircraft ground support equipment. specific requirements. passenger stairs
• EN 12312-2: 2014; Aircraft ground support equipment. specific requirements. catering vehicles
• EN 12312-4: 2014; Aircraft ground support equipment. specific requirements. passenger boarding bridges
• EN 12312-5 : 2005+A1 : 2009 ; Aircraft ground support equipment. specific requirements. aircraft refueling equipment
• EN 12312-7 : 2005+A1 : 2009 ; Aircraft ground support equipment. specific requirements. aircraft motion equipment
• EN 12312-8 : 2005+A1 : 2009 ; Aircraft ground support equipment. specific requirements. Maintenance ladders and platforms
• EN 12312-9 : 2005+A1 : 2009 ; Aircraft ground support equipment. specific requirements. Container/Pallet loaders
• EN 12312-9 : 2013 ; Aircraft ground support equipment. specific requirements. Container/Pallet loaders
• EN 12312-10 : 2005+A1 : 2009 ; Aircraft ground support equipment. specific requirements. Container/Pallet transfer carriers
• EN 12312-11: 2005; Aircraft ground support equipment. specific requirements. Container/pallet dolly and freeload trailers
• EN 12312-14 : 2006+A1 : 2009 ; Aircraft ground support equipment. specific requirements. Disabled / incapacitated passenger boarding vehicles
• EN 12312-14: 2014; Aircraft ground support equipment. specific requirements. Disabled / incapacitated passenger boarding vehicles
• EN 12312-15 : 2006+A1 : 2009 ; Aircraft ground support equipment. specific requirements. Luggage and equipment tractors
• EN 12312-16 : 2005+A1 : 2009 ; Aircraft ground support equipment. specific requirements. Air actuation equipment
• EN 12312-18 : 2005+A1 : 2009 ; Aircraft ground support equipment. specific requirements. Nitrogen or Oxygen units
• EN 12312-19 : 2005+A1 : 2009 ; Aircraft ground support equipment. specific requirements. Aircraft jacks, axle jacks and hydraulic tail struts
• EN 12312-20 : 2005+A1 : 2009 ; Aircraft ground support equipment. specific requirements. electric earth power units
• EN 12316-1: 2000; Flexible sheets for waterproofing. Determination of peel resistance of joints. bitumen sheets for roof waterproofing
• EN 12316-2: 2013; Flexible sheets for waterproofing. Determination of peel resistance of joints. Plastic and rubber sheets for roof waterproofing
• EN 12317-1 : 2000 ; Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of the slip resistance of joints
• EN 12317-2: 2010; Flexible sheets for waterproofing. Determination of the slip resistance of joints. Plastic and rubber sheets for roof waterproofing
• EN 12320: 2001; Building equipment. Padlocks and padlock assemblies. Requirements and test methods.
• EN 12320: 2012; Building equipment. Padlocks and padlock assemblies. Requirements and test methods.
• EN 12322: 1999; In vitro diagnostic medical devices. Culture medium for microbiology. Performance criteria for culture medium.
• EN 12323: 1998; Barcoding. Symbology features. "Code 16K".
• EN 12323: 2005; AIDC technologies. Symbology features. Code 16K.
• EN 12324-1: 1999; Irrigation techniques. Roller machine systems. Size series
• EN 12324-2: 1999; Irrigation techniques. Roller machine systems. Characteristics of polyethylene pipes for reel machines
• EN 12324-3: 1999; Irrigation techniques. Roller machine systems. Presentation of technical specifications
• EN 12324-4: 1999; Irrigation techniques. Roller machine systems. Check the user requirements list
• EN 12325-1 : 1999 ; Irrigation techniques. Center pivot and movable side systems. Presentation of technical specifications
• EN 12325-2: 1999; Irrigation techniques. Center pivot and movable side systems. Minimum performance and specifications
• EN 12325-3: 1999; Irrigation techniques. Center pivot and movable side systems. Terminology and classification
• EN 12326-1: 2014; Slate and stone for discontinuous roofing and exterior cladding. Specifications for slate and carbonate slate
• EN 12326-2: 2000; Slate and stone products for discontinuous roofing and cladding. test methods
• EN 12326-2: 2011; Slate and stone for discontinuous roofing and exterior cladding. Test methods for slate and carbonate slate
• EN 12327 : 2000 ; Gas supply systems. Pressure testing, commissioning and deactivation procedures. functional requirements.
• EN 12327 : 2012 ; Gas infrastructure. Pressure testing, commissioning and deactivation procedures. functional requirements.
• EN 12329: 2000; Corrosion protection of metals. Additional treated electrodeposited zinc coatings on iron or steel.
• EN 12330 : 2000 ; Corrosion protection of metals. Electrodeposited cadmium coatings on iron or steel.
• EN 12331 : 2003+A2 : 2010 ; Food processing machinery. Meat grinders. Safety and hygiene requirements.
• EN 12331 : 2015 ; Food processing machinery. Meat grinders. Safety and hygiene requirements.
• EN 12332-1: 1999; Rubber or plastic coated fabrics. Determination of the bursting force. steel ball method
• EN 12334: 2001; Industrial valves. Cast iron check valves.
• EN 12336 : 2005+A1 : 2008 ; Tunneling machines. Shield machines, push drilling machines, auger drilling machines, lining assembly equipment. Security requirements.
• EN 12337-1 : 2000 ; Glass in the building. Chemically strengthened soda lime silicate glass. Definition and explanation
• EN 12338: 1998; water quality. Mercury determination. Consolidation methods.
• EN 12341: 1999; Air quality. Determination of the PM10 fraction of suspended particulate matter. Reference method and field test procedure to demonstrate reference equivalence of measurement methods.
• EN 12341: 2014; Ambient atmosphere. Standard gravimetric measurement method for determining the mass concentration of suspended particulate matter PM$d1$d0 or PM$d2$d,$d5.
• EN 12342 : 1998+A1 : 2009 ; Breathing tubes intended for use with anesthetic apparatus and ventilators.
• EN 12345: 1999; Source. Multilingual terms for source links with images.
• EN 12346: 1999; Gymnastics equipment. Wall bars, lattice ladders and climbing frames. Security requirements and test methods.
• EN 12347: 1998; Biotechnology. Performance criteria for steam sterilizers and autoclaves.
• EN 12348 : 2000+A1 : 2009 ; Core drilling machines on the stand. Safety.
• EN 12350-4: 2000; Testing of fresh concrete. degree of compressibility
• EN 12350-4: 2009; Testing of fresh concrete. degree of compressibility
• EN 12350-7 : 2000 ; Testing of fresh concrete. air content. Pressure methods
• EN 12350-7 : 2009 ; Testing of fresh concrete. air content. Pressure methods
• EN 12350-8: 2010; Testing of fresh concrete. Self compacting concrete. slump flow test
• EN 12350-9 : 2010 ; Testing of fresh concrete. Self compacting concrete. V-funnel test
• EN 12350-10: 2010; Testing of fresh concrete. Self compacting concrete. L box test
• EN 12350-11: 2010; Testing of fresh concrete. Self compacting concrete. Sieve separation test
• EN 12350-12: 2010; Testing of fresh concrete. Self compacting concrete. J-ring test
• EN 12351 : 1999 ; Industrial valves. Protective caps for flanged valves.
• EN 12351 : 2010 ; Industrial valves. Protective caps for flanged valves.
• EN 12352 : 2000 ; traffic control equipment. Warning and safety light devices.
• EN 12352 : 2006 ; traffic control equipment. Warning and safety light devices.
• EN 12353: 2000; Chemical disinfectants and antiseptics. Conservation of microbial strains used for determination of bactericidal and fungicidal activity.
• EN 12353 : 2006 ; Chemical disinfectants and antiseptics. Conservation of test organisms used for determination of bactericidal, sporicidal and fungicidal activity.
• EN 12353 : 2013 ; Chemical disinfectants and antiseptics. Conservation of test organisms used for the determination of bactericidal (including Legionella), mycobactericidal, sporicidal, fungicidal and virucidal (including bacteriophages) activity.
• EN 12354-1 : 2000 ; Building acoustics. Estimation of acoustic performance in buildings from the performance of the elements. Airborne sound insulation between rooms
• EN 12354-2: 2000; Building acoustics. Estimation of acoustic performance in buildings from the performance of the elements. Impact sound insulation between rooms
• EN 12354-3: 2000; Building acoustics. Estimation of acoustic performance in buildings from the performance of the elements. Airborne sound insulation against external sound
• EN 12354-5: 2009; Building acoustics. Estimation of the acoustic performance of the building from the performance of the elements. Noise levels due to service equipment
• EN 12369-1: 2001; Wood based panels. Characteristic values ​​for structural design. OSB, particle boards and fire boards
• EN 12369-2: 2011; Wood based panels. Characteristic values ​​for structural design. plywood
• EN 12369-3: 2008; Wood based panels. Characteristic values ​​for structural design. solid wood panels
• EN 12370: 1999; Natural stone testing methods. Determination of resistance to salt crystallization.
• EN 12371 : 2010 ; Natural stone testing methods. Determination of frost resistance.
• EN 12372: 1999; Natural stone testing methods. Determination of flexural strength under concentrated load.
• EN 12372: 2006; Natural stone testing methods. Determination of flexural strength under concentrated load.
• EN 12373-2: 1999; Aluminum and aluminum alloys. Anodized. Determination of mass per unit area (surface density) of anodic oxidation coatings. gravimetric method
• EN 12373-3: 1999; Aluminum and aluminum alloys. Anodized. Thickness determination of anodic oxidation coatings. Non-destructive measurement with a split beam microscope
• EN 12373-4: 1998; Aluminum and aluminum alloys. Anodized. Estimation of loss of absorbing power of anodic oxidation coatings after pre-sealing by acid treatment paint spot test
• EN 12373-5: 1999; Aluminum and aluminum alloys. Anodized. Evaluation of the quality of sealed anodic oxidation coatings by acceptance measurement
• EN 12373-6: 1999; Aluminum and aluminum alloys. Anodized. Evaluation of the quality of sealed anodic oxidation coatings by measuring the mass loss after immersion in a phosphoric acid/chromic acid solution without prior acid treatment
• EN 12373-7: 1999; Aluminum and aluminum alloys. Anodized. Evaluation of the quality of sealed anodic oxidation coatings by measuring the mass loss after pre-acid treatment in a phosphoric acid/chromic acid solution
• EN 12373-7: 2002; Aluminum and aluminum alloys. Anodized. Evaluation of the quality of sealed anodic oxidation coatings by measuring the mass loss after pre-acid treatment in a phosphoric acid/chromic acid solution
• EN 12373-8: 1999; Aluminum and aluminum alloys. Anodized. Determination of comparative fastness of colored anodic oxidation coatings to ultraviolet light and heat
• EN 12373-9 : 1999 ; Aluminum and aluminum alloys. Anodized. Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear tester
• EN 12373-10: 1999; Aluminum and aluminum alloys. Anodized. Measurement of the average specific wear resistance of anodic oxidation coatings using an abrasive jet tester
• EN 12373-11: 2001; Aluminum and aluminum alloys. Anodized. Measurement of specular reflection and specular gloss of anodic oxidation coatings at angles 20^D, 45^D, 60^D and 85^D

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.