EN European Norm Tests Part 58

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 10246-4 : 2000 ; Non-destructive testing of steel pipes. Automatic full circumferential magnetic transducer/flux leakage testing of seamless ferromagnetic steel pipes for detection of transverse defects
• EN 10246-5: 2000; Non-destructive testing of steel pipes. Automatic full circumferential magnetic transducer/flux leakage test of seamless and welded (except submerged arc welded) ferromagnetic steel pipes for detection of longitudinal defects
• EN 10246-6 : 2000 ; Non-destructive testing of steel pipes. Automatic full circumferential ultrasonic testing of seamless steel pipes for detection of transverse defects
• EN 10246-7: 1996; Non-destructive testing of steel pipes. Automatic full circumferential ultrasonic testing of seamless and welded (except submerged arc welded) steel pipes for detection of longitudinal defects
• EN 10246-7: 2005; Non-destructive testing of steel pipes. Automatic full circumferential ultrasonic testing of seamless and welded (except submerged arc welded) pipes for detection of longitudinal defects
• EN 10246-8 : 2000 ; Non-destructive testing of steel pipes. Automatic ultrasonic testing of the weld seam of electrically welded steel pipes for detection of longitudinal defects
• EN 10246-9 : 2000 ; Non-destructive testing of steel pipes. Automatic ultrasonic testing of the weld seam of submerged arc welded steel pipes for detection of longitudinal and/or transverse defects
• EN 10246-10 : 2000 ; Non-destructive testing of steel pipes. Radiographic testing of the weld seam of automatic fusion arc welded steel pipes for detection of defects
• EN 10246-11: 2000; Non-destructive testing of steel pipes. Liquid penetrant testing of seamless and welded steel pipes for detection of surface defects
• EN 10246-12 : 2000 ; Non-destructive testing of steel pipes. Magnetic particle inspection of seamless and welded ferromagnetic steel pipes for detection of surface defects
• EN 10246-13 : 2000 ; Non-destructive testing of steel pipes. Automatic full circumferential ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel pipes
• EN 10246-14 : 2000 ; Non-destructive testing of steel pipes. Automatic ultrasonic testing of seamless and welded (except submerged arc welded) steel pipes for detection of layered defects
• EN 10246-15 : 2000 ; Non-destructive testing of steel pipes. Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel pipes for detection of laminar defects
• EN 10246-16 : 2000 ; Non-destructive testing of steel pipes. Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel pipes for detection of layered defects
• EN 10246-17 : 2000 ; Non-destructive testing of steel pipes. Ultrasonic testing of pipe ends of seamless and welded steel pipes for detection of laminar defects
• EN 10246-18 : 2000 ; Non-destructive testing of steel pipes. Magnetic particle inspection of pipe ends of seamless and welded ferromagnetic steel pipes for detection of laminar defects
• EN 10247 : 2007 ; Micrographic investigation of non-metallic inclusion content of steels using standard pictures.
• EN 10248-1 : 1996 ; Hot rolled sheet stacking of non-alloy steels. Technical delivery conditions
• EN 10248-2: 1996; Hot rolled sheet stacking of non-alloy steels. Shape and size tolerances
• EN 10249-1 : 1996 ; Cold-formed sheet stacking of non-alloy steels. Technical delivery conditions
• EN 10249-2: 1996; Cold-formed sheet stacking of non-alloy steels. Shape and size tolerances
• EN 10250-1: 1999; Open steel forgings for general engineering purposes. General Requirements
• EN 10250-2: 2000; Open steel forgings for general engineering purposes. Non-alloy grade and special steels
• EN 10250-3: 2000; Open steel forgings for general engineering purposes. Alloy special steels
• EN 10250-4: 2000; Open steel forgings for general engineering purposes. stainless steels
• EN 10251: 1997; magnetic materials. Methods for determining the geometrical properties of electric steel sheet and strip.
• EN 10251: 2015; magnetic materials. Methods for determining the geometrical properties of electric steel sheet and strip.
• EN 10252: 1997; magnetic materials. Methods of measuring magnetic properties of magnetic steel sheet and strip at medium frequencies.
• EN 10253-1: 1999; Butt weld pipe fittings. Forged carbon steel for general use and without special inspection requirements
• EN 10253-2: 2007; Butt weld pipe fittings. Non-alloy and ferritic alloy steels with special inspection requirements
• EN 10253-3: 2008; Butt weld pipe fittings. Forged austenitic and austenitic-ferritic (duplex) stainless steels without special inspection requirements
• EN 10253-4: 2008; Butt weld pipe fittings. Forged austenitic and austenitic-ferritic (duplex) stainless steels with special inspection requirements
• EN 10254 : 1999 ; Steel closed die forging. General technical delivery conditions.
• EN 10256: 2000; Non-destructive testing of steel pipes. Qualification and competence of level 1 and level 2 non-destructive testing personnel.
• EN 10257-1: 1998; Zinc or zinc alloy coated unalloyed steel wire for armoring power cables or telecommunication cables. land cables
• EN 10257-1: 2011; Zinc or zinc alloy coated unalloyed steel wire for armoring power cables or telecommunication cables. land cables
• EN 10257-2: 1998; Zinc or zinc alloy coated unalloyed steel wire for armoring power cables or telecommunication cables. Submarine cables
• EN 10257-2: 2011; Zinc or zinc alloy coated unalloyed steel wire for armoring power cables or telecommunication cables. Submarine cables
• EN 10258: 1997; Cold rolled stainless steel narrow strip and cut lengths. Size and shape tolerances.
• EN 10259: 1997; Cold rolled stainless and heat resistant steel wide strip and sheet/plate. Size and shape tolerances.
• EN 10264-1: 2012; Steel wire and wire products. Steel wire for ropes. General Requirements
• EN 10264-2: 2012; Steel wire and wire products. Steel wire for ropes. Cold drawn unalloyed steel wire for ropes for general applications
• EN 10264-3: 2012; Steel wire and wire products. Steel wire for ropes. Round and shaped non-alloy steel wire for high-duty applications
• EN 10264-4: 2012; Steel wire and wire products. Steel wire for ropes. stainless steel wire
• EN 10265: 1996; magnetic materials. Specification for steel sheet and strip with specified mechanical properties and magnetic permeability.
• EN 10267: 1998; Ferritic-perlitic steels for precipitation hardening from hot working temperatures.
• EN 10268: 1999; Cold rolled flat products of high yield strength micro-alloy steels for cold forming. General delivery conditions.
• EN 10268 : 2006+A1 : 2013 ; Cold rolled steel flat products with high yield strength for cold forming. Technical delivery conditions.
• EN 10269 : 1999+A1 : 2006 ; Steels and nickel alloys for fasteners with specified high and/or low temperature properties.
• EN 10269: 2013; Steels and nickel alloys for fasteners with specified high and/or low temperature properties.
• EN 10270-1: 2001; Steel wire for mechanical springs. Patented cold drawn unalloyed spring steel wire
• EN 10270-1: 2011; Steel wire for mechanical springs. Patented cold drawn unalloyed spring steel wire
• EN 10270-2: 2011; Steel wire for mechanical springs. Oil-hardened and tempered spring steel wire
• EN 10270-3: 2001; Steel wire for mechanical springs. stainless spring steel wire
• EN 10270-3: 2011; Steel wire for mechanical springs. stainless spring steel wire
• EN 10271: 1999; Steel flat products electrolytically coated with zinc-nickel (ZN). Technical delivery conditions.
• EN 10272: 2000; Pressure stainless steel rods.
• EN 10272: 2007; Pressure stainless steel rods.
• EN 10272: 2016; Pressure stainless steel rods.
• EN 10273: 2000; Pressure-purpose hot-rolled weldable steel bars with specified high-temperature properties.
• EN 10273: 2007; Pressure-purpose hot-rolled weldable steel bars with specified high-temperature properties.
• EN 10273: 2016; Pressure-purpose hot-rolled weldable steel bars with specified high-temperature properties.
• EN 10274: 1999; Metallic materials. Drop weight tear test.
• EN 10275 : 1999 ; Metallic materials. Tube ring hydraulic pressure test.
• EN 10276-1: 2000; Chemical analysis of ferrous materials. Oxygen determination in steel and iron. Sampling and preparation of steel samples for oxygen determination
• EN 10277-1: 1999; Bright steel products. Technical delivery conditions. general
• EN 10277-1: 2008; Bright steel products. Technical delivery conditions. general
• EN 10277-2: 1999; Bright steel products. Technical delivery conditions. General engineering steels
• EN 10277-2: 2008; Bright steel products. Technical delivery conditions. General engineering steels
• EN 10277-3: 1999; Bright steel products. Technical delivery conditions. Free cutting steels
• EN 10277-3: 2008; Bright steel products. Technical delivery conditions. Free cutting steels
• EN 10277-4: 1999; Bright steel products. Technical delivery conditions. Hardening steels
• EN 10277-4: 2008; Bright steel products. Technical delivery conditions. Hardening steels
• EN 10277-5: 1999; Bright steel products. Technical delivery conditions. Steels for quenching and tempering
• EN 10277-5: 2008; Bright steel products. Technical delivery conditions. Steels for quenching and tempering
• EN 10278: 1999; Dimensions and tolerances of bright steel products.
• EN 10279: 2000; Hot rolled steel channels. Shape, size and mass tolerances.
• EN 10280 : 2001+A1 : 2007 ; magnetic materials. Methods of measuring magnetic properties of electrical plate and strip by means of a single plate tester.
• EN 10282: 2001; magnetic materials. Test method for determining the surface insulation resistance of electrical board and strip.
• EN 10284: 2000; Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems.
• EN 10291: 2000; Metallic materials. Uniaxial creep test in tension. Test methods.
• EN 10292: 2000; Continuous hot dip coated strip and steel sheets with higher yield strength for cold forming. Technical delivery conditions.
• EN 10292: 2007; Continuous hot-dip coated strip and steel sheet with high yield strength for cold forming. Technical delivery conditions.
• EN 10293: 2005; Steel castings for general engineering uses.
• EN 10293: 2015; Steel castings. Steel castings for general engineering uses.
• EN 10294-1 : 2005 ; Hollow rods for processing. Technical delivery conditions. Unalloyed and alloyed steels
• EN 10294-2: 2012; Hollow rods for processing. Technical delivery conditions. Stainless steels with specified machinability properties
• EN 10296-2: 2005; Welded circular steel pipes for mechanical and general engineering purposes. Technical delivery conditions. Stainless steel
• EN 10297-2: 2005; Seamless circular steel pipes for mechanical and general engineering purposes. Technical delivery conditions. Stainless steel
• EN 10298 : 2005 ; Steel pipes and fittings for onshore and offshore pipelines. Inner lining with cement mortar.
• EN 10300: 2005; Steel pipes and fittings for onshore and offshore pipelines. Bituminous hot-applied materials for exterior cladding.
• EN 10302: 2008; Creep resistant steels, nickel and cobalt alloys.
• EN 10303: 2015; Thin magnetic steel strip and sheet for use at medium frequencies.
• EN 10305-1: 2010; Steel pipes for precision applications. Technical delivery conditions. Seamless cold drawn tubes
• EN 10305-1: 2016; Steel pipes for precision applications. Technical delivery conditions. Seamless cold drawn tubes
• EN 10305-2: 2016; Steel pipes for precision applications. Technical delivery conditions. Welded cold drawn pipes
• EN 10305-3: 2016; Steel pipes for precision applications. Technical delivery conditions. Welded cold sized pipes
• EN 10305-4: 2011; Steel pipes for precision applications. Technical delivery conditions. Seamless cold drawn tubes for hydraulic and pneumatic power systems
• EN 10305-4: 2016; Steel pipes for precision applications. Technical delivery conditions. Seamless cold drawn tubes for hydraulic and pneumatic power systems
• EN 10305-5: 2016; Steel pipes for precision applications. Technical delivery. Welded cold size square and rectangular pipes

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.