EN European Norm Tests Part 68

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 12697-11: 2012; Bituminous mixtures. Test methods for hot mix asphalt. Determination of affinity between aggregate and bitumen
• EN 12697-12 : 2008 ; Bituminous mixtures. Test methods for hot mix asphalt. Determination of water sensitivity of bituminous samples
• EN 12697-16: 2016; Bituminous mixtures. Test methods. Wear caused by studded tires
• EN 12697-19: 2012; Bituminous mixtures. Test methods for hot mix asphalt. Permeability of the sample
• EN 12697-20: 2012; Bituminous mixtures. Test methods for hot mix asphalt. Indent (CY) using cube or cylindrical samples
• EN 12697-21: 2012; Bituminous mixtures. Test methods for hot mix asphalt. Indent using plate samples
• EN 12697-24 : 2012 ; Bituminous mixtures. Test methods for hot mix asphalt. resistance to fatigue
• EN 12697-25 : 2005 ; Bituminous mixtures. Test methods for hot mix asphalt. cyclic compression test
• EN 12697-25: 2016; Bituminous mixtures. Test methods. cyclic compression test
• EN 12697-26: 2012; Bituminous mixtures. Test methods for hot mix asphalt. Hardness
• EN 12697-27: 2001; Bituminous mixtures. Test methods for hot mix asphalt. Sampling
• EN 12697-28: 2001; Bituminous mixtures. Test methods for hot mix asphalt. Preparation of samples for determination of binder content, water content and grading
• EN 12697-30: 2012; Bituminous mixtures. Test methods for hot mix asphalt. Sample preparation with impact compactor
• EN 12697-31 : 2007 ; Bituminous mixtures. Test methods for hot mix asphalt. Sample preparation with rotary compactor
• EN 12697-34 : 2012 ; Bituminous mixtures. Test methods for hot mix asphalt. Marshall test
• EN 12697-35: 2016; Bituminous mixtures. Test methods. laboratory mixing
• EN 12697-39: 2012; Bituminous mixtures. Test methods for hot mix asphalt. Binder content with ignition
• EN 12697-40 : 2005 ; Bituminous mixtures. Test methods for hot mix asphalt. On-site drainability
• EN 12697-40 : 2012 ; Bituminous mixtures. Test methods for hot mix asphalt. On-site drainability
• EN 12697-41: 2005; Bituminous mixtures. Test methods for hot mix asphalt. Resistance to de-icing liquids
• EN 12697-41: 2013; Bituminous mixtures. Test methods for hot mix asphalt. Resistance to de-icing liquids
• EN 12697-42: 2005; Bituminous mixtures. Test methods for hot mix asphalt. Amount of coarse foreign matter in reclaimed asphalt
• EN 12697-42: 2012; Bituminous mixtures. Test methods for hot mix asphalt. The amount of foreign matter in the recycled asphalt
• EN 12697-43 : 2005 ; Bituminous mixtures. Test methods for hot mix asphalt. fuel resistance
• EN 12697-43 : 2014 ; Bituminous mixtures. Test methods for hot mix asphalt. fuel resistance
• EN 12697-44: 2010; Bituminous mixtures. Test methods for hot mix asphalt. Crack propagation by semi-circular bending test
• EN 12697-45: 2012; Bituminous mixtures. Test methods for hot mix asphalt. Saturation Aging Tensile Hardness (SATS) conditioning test
• EN 12697-46: 2012; Bituminous mixtures. Test methods for hot mix asphalt. Low temperature cracking and properties by uniaxial tensile tests
• EN 12697-47: 2010; Bituminous mixtures. Test methods for hot mix asphalt. Determination of ash content of natural asphalts
• EN 12697-49: 2014; Bituminous mixtures. Test methods for hot mix asphalt. Determination of friction after polishing
• EN 12698-1:2007; Chemical analysis of nitride bonded silicon carbide refractories. chemical methods
• EN 12698-2: 2007; Chemical analysis of nitride bonded silicon carbide refractories. XRD methods
• EN 12699: 2001; Execution of special geotechnical works. Relocation stacks.
• EN 12699: 2015; Execution of special geotechnical works. Relocation stacks.
• EN 12702: 2000; Adhesives for paper and cardboard, packaging and disposable sanitary products. Determination of the blocking behavior of potentially adhesive layers.
• EN 12703: 1999; Adhesives for paper and cardboard, packaging and disposable sanitary products. Determination of low temperature flexibility or cold crack temperature.
• EN 12703: 2012; Adhesives for paper and cardboard, packaging and disposable sanitary products. Determination of low temperature flexibility or cold crack temperature.
• EN 12703: 2016; Adhesives for paper and cardboard, packaging and disposable sanitary products. Determination of low temperature flexibility or cold crack temperature.
• EN 12704: 2000; Adhesives for paper and cardboard, packaging and disposable sanitary products. Determination of foam formation for aqueous adhesives.
• EN 12704: 2012; Adhesives for paper and cardboard, packaging and disposable sanitary products. Determination of foam formation for aqueous adhesives.
• EN 12704: 2016; Adhesives for paper and cardboard, packaging and disposable sanitary products. Determination of foam formation for aqueous adhesives.
• EN 12705: 2000; Adhesives for leather and shoe materials. Determination of color change by migration of white or brightly colored leather surfaces.
• EN 12705: 2011; Adhesives for leather and shoe materials. Determination of color change by migration of white or brightly colored leather surfaces.
• EN 12706:2000; Adhesives. Test methods for hydraulic ground leveling and/or leveling compounds. Determination of flow properties.
• EN 12707: 2000; Plastic drums. Removable head (tight-headed) drums with rated capacities of 210 l, 220 l and 225 l.
• EN 12707: 2009; Plastic drums. Removable head (tight-head) drums with rated capacities of 210 l and 225 l.
• EN 12708: 2000; Plug/plug closure systems for plastic containers with nominal capacities from 20 l to 225 l.
• EN 12709: 2000; Plastic drums. Drums of circular cross-section with removable head (tight-headed) with a nominal capacity of 20 l to 120 l.
• EN 12710: 2000; Fibreboard drums. Removable head (open head) drums with closure ring, nominal capacity from 15 l to 250 l.
• EN 12710: 2006; Fibreboard drums. Removable head (open head) drums with closure ring, nominal capacity from 15 l to 250 l.
• EN 12711: 2000; Steel drums. Removable head (tight-headed) drums with a minimum total capacity of 230 l.
• EN 12712 : 2000 ; Plastic drums. Cans with nominal capacities from 800 l to 1200 l for optimum use of pallet sizes 1000 mm x 1200 mm, 1140 mm x 1140 mm and 20 mm x 60 mm.
• EN 12713: 2000; Screw cap closure systems for plastic containers with nominal capacities from 20 L to 60 L.
• EN 12714: 2000; Plastic drums. Removable head (open head) drums with a nominal capacity of 25 L to 220 L.
• EN 12714: 2009; Plastic drums. Removable head (open head) drums with a nominal capacity of 25 L to 60 L.
• EN 12715 : 2000 ; Execution of special geotechnical works. Grouting.
• EN 12717 : 2001+A1 : 2009 ; Safety of machine tools. Drilling machines.
• EN 12720: 1997; Furniture. Evaluation of surface resistance to cold liquids.
• EN 12720 : 2009+A1 : 2013 ; Furniture. Evaluation of surface resistance to cold liquids.
• EN 12721: 1997; Furniture. Evaluation of surface resistance to wet heat.
• EN 12721 : 2009+A1 : 2013 ; Furniture. Evaluation of surface resistance to wet heat.
• EN 12722: 1997; Furniture. Evaluation of surface resistance to dry heat.
• EN 12722 : 2009+A1 : 2013 ; Furniture. Evaluation of surface resistance to dry heat.
• EN 12723: 2000; Liquid pumps. General requirements for pumps and installations. Definitions, quantities, letter symbols and units.
• EN 12726: 2000; Packaging. Cork mouth polish with 18,5 mm hole diameter for corks and tamper evident pods.
• EN 12727: 2016; Furniture. Row seating. Safety, strength and endurance requirements.
• EN 12728: 2000; Surfactants. Determination of foaming power. Perforated disc beating method.
• EN 12730: 2001; Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to static loading.
• EN 12730: 2015; Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to static loading.
• EN 12732: 2000; Gas supply systems. Welding of steel pipes. functional requirements.
• EN 12732 : 2013+A1 : 2014 ; Gas infrastructure. Welding of steel pipes. functional requirements.
• EN 12734: 2000; Irrigation techniques. Quick connect pipes for mobile irrigation source. Technical specifications and tests.
• EN 12735-1: 2010; Copper and copper alloys. Seamless, round copper pipes for air conditioning and refrigeration. Pipes for piping systems
• EN 12735-1: 2016; Copper and copper alloys. Seamless, round pipes for air conditioning and refrigeration. Pipes for piping systems
• EN 12735-2: 2010; Copper and copper alloys. Seamless, round copper pipes for air conditioning and refrigeration. Pipes for equipment
• EN 12735-2: 2016; Copper and copper alloys. Seamless, round pipes for air conditioning and refrigeration. Pipes for equipment
• EN 12738: 1999; Biotechnology. Laboratories for research, development and analysis. Guideline for the preservation of animals vaccinated with microorganisms in experiments.
• EN 12740: 1999; Biotechnology. Laboratories for research, development and analysis. Guidance for the treatment, deactivation and testing of waste.
• EN 12741: 1999; Biotechnology. Laboratories for research, development and analysis. Guidance for biotechnology laboratory operations.
• EN 12742: 1999; Fruit and vegetable juices. Determination of free amino acid content. Liquid chromatographic method.
• EN 12743: 1999; Shoes. Test methods for outsoles. Compression energy.
• EN 12744: 1999; Shoes. Test methods for insoles. Delamination resistance.
• EN 12745: 1999; Shoes. Test methods for insoles. Pin holding power.
• EN 12746: 2000; Shoes. Test methods for insoles and insoles. Water absorption and desorption.
• EN 12747: 1999; Shoes. Test methods for insoles. Wear resistance.
• EN 12748 : 1999 ; Shoes. Test methods for outer soles, inner soles, linings and inner socks. Water soluble content.
• EN 12750 : 2013 ; The safety of woodworking machinery. Four-sided molding machines.
• EN 12751 : 1999 ; Textile. Sampling of fibers, yarns and fabrics for testing.
• EN 12752-1 : 1999 ; Gas-fired type B tumble dryers with a rated heat input not exceeding 20 kW. Safety
• EN 12752-2: 1999; Gas-fired type B tumble dryers with a rated heat input not exceeding 20 kW. Rational use of energy
• EN 12753 : 2005+A1 : 2010 ; Thermal cleaning systems for exhaust gas from surface treatment equipment. Security requirements.
• EN 12755 : 2000 ; Portable gas cylinders. Filling conditions for acetylene bundles.
• EN 12756: 2001; Mechanical seals. Basic dimensions, identification and material codes.
• EN 12757-1 : 2005+A1 : 2010 ; Mixing machines for coating materials. Security requirements. Mixing machines for use in vehicle repair
• EN 12758 : 2011 ; Glass in the building. Glass and airborne sound insulation. Product descriptions and determination of features.
• EN 12760: 1999; valves. Socket weld ends for steel valves.
• EN 12760: 2016; Industrial valves. Socket weld ends for steel valves.
• EN 12761-1 : 2001 ; Agricultural and forestry machinery. Sprayers and liquid fertilizer dispensers. Environmental protection. general
• EN 12761-2: 2001; Agricultural and forestry machinery. Sprayers and liquid fertilizer dispensers. Environmental protection. Field sprayers
• EN 12761-3: 2001; Agricultural and forestry machinery. Sprayers and liquid fertilizer dispensers. Environmental protection. Air assisted sprayers for shrub and tree crops

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.