EN European Norm Tests Part 15

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 806-3: 2006; Specifications for installations inside buildings carrying water for human consumption. Pipe sizing. Simplified method
• EN 806-4: 2010; Specifications for installations inside buildings carrying water for human consumption. Setup
• EN 806-5: 2012; Specifications for installations inside buildings carrying water for human consumption. Operation and maintenance
• EN 809 : 1998+A1 : 2009 ; Pumps and pump units for liquids. Common security requirements.
• EN 810: 1997; Dehumidifiers with electrically operated compressors. Rating tests, marking, operational requirements and technical data sheet.
• EN 811: 1997; Machinery safety. Safety distances to prevent lower limbs from reaching dangerous areas.
• EN 813: 1997; Personal protective equipment to prevent falls from height. Sit down, harness.
• EN 813 : 2008 ; Personal fall protection equipment. Sit down, harness.
• EN 814-2: 1997; Air conditioners and heat pumps with electrically operated compressors. Cooling mode. Tests and requirements for marking
• EN 814-3: 1997; Air conditioners and heat pumps with electrically operated compressors. Cooling mode. Requirements
• EN 815 : 1996+A2 : 2008 ; Safety of unarmoured tunnel boring machines and barless shaft drilling machines for rock.
• EN 816: 1997; Sanitary faucet. Automatic shut-off valves PN 10 ;
• EN 817: 1998; Sanitary faucet. Mechanical mixers (PN 10). General technical specifications.
• EN 817 : 2008 ; Sanitary faucet. Mechanical mixing valves (PN 10). General technical specifications.
• EN 818-1 : 1996+A1 : 2008 ; Short link chain for lifting. Safety . General admission conditions
• EN 818-2 : 1996+A1 : 2008 ; Short link chain for lifting. Safety. Medium tolerance chain for chain slings. 8th grade
• EN 818-3 : 1999+A1 : 2008 ; Short link chain for lifting. Safety. Medium tolerance chain for chain slings. 4th grade
• EN 818-4 : 1996+A1 : 2008 ; Short link chain for lifting. Safety . Chain slings – Grade 8
• EN 818-5 : 1999+A1 : 2008 ; Short link chain for lifting. Safety . Chain slings – Grade 4
• EN 818-6 : 2000+A1 : 2008 ; Short link chain for lifting. Safety. Chain slings. Specification for use and maintenance information to be provided by the manufacturer
• EN 820-4: 2009; Advanced technical ceramics. Thermomechanical properties of monolithic ceramics. Determination of flexural creep deformation at high temperatures
• EN 820-5: 2009; Advanced technical ceramics. Thermomechanical properties of monolithic ceramics. Determination of elastic modulus at high temperatures
• EN 821-1: 1995; Advanced technical ceramics. Monolithic ceramics. Thermo-physical properties. Determination of thermal expansion
• EN 821-2: 1997; Advanced technical ceramics. Monolithic ceramics. Thermo-physical properties. Determination of thermal dissipation by laser flash (or heat pulse) method
• EN 821-3: 2005; Advanced technical ceramics. Monolithic ceramics. Thermo-physical properties. Determination of specific heat capacity
• EN 822: 1995; Thermal insulation products for building applications. Determination of length and width.
• EN 822: 2013; Thermal insulation products for building applications. Determination of length and width.
• EN 823: 1995; Thermal insulation products for building applications. Determination of thickness.
• EN 823: 2013; Thermal insulation products for building applications. Determination of thickness.
• EN 824: 1995; Thermal insulation products for building applications. Squareness determination.
• EN 824: 2013; Thermal insulation products for building applications. Squareness determination.
• EN 825: 1995; Thermal insulation products for building applications. Flatness determination.
• EN 825: 2013; Thermal insulation products for building applications. Flatness determination.
• EN 826: 1996; Thermal insulation products for building applications. Determination of compression behavior.
• EN 826: 2013; Thermal insulation products for building applications. Determination of compression behavior.
• EN 827: 1995; Adhesives. Determination of conventional solids content and constant mass solids content.
• EN 827: 2005; Adhesives. Determination of conventional solids content and constant mass solids content.
• EN 828: 1998; Adhesives. Wettability Determination of solid surface by measuring contact angle and critical surface tension.
• EN 828: 2013; Adhesives. Wettability Determination of solid surface by measuring contact angle and surface free energy.
• EN 829: 1997; In vitro diagnostic systems. Transport packages for medical and biological samples. Requirements, tests.
• EN 832: 2000; Thermal performance of buildings. Calculation of energy use for heating. Residential constructions.
• EN 834: 1995; Heat cost allocators for determining the consumption of room heating radiators. Electrical energy powered devices.
• EN 834: 2013; Heat cost allocators for determining the consumption of room heating radiators. Electrical energy powered devices.
• EN 835: 1995; Heat cost allocators for determining the consumption of room heating radiators. Devices that are not a source of electrical energy according to the evaporation principle.
• EN 836 : 1997+A4 : 2011 ; Garden equipment. Electric lawnmowers. Safety.
• EN 837-1: 1998; Pressure gauges. Bourdon tube pressure gauges. Dimensions, metrology, requirements and tests
• EN 837-2: 1998; Pressure gauges. Selection and installation recommendations for pressure gauges
• EN 837-3: 1998; Pressure gauges. Diaphragm and capsule pressure gauges. Dimensions, metrology, requirements and tests
• EN 838: 1996; Workplace environments. Common samplers for the determination of gases and vapors. Requirements and test methods.
• EN 839: 2014; Wood preservatives. Determination of its protective efficacy against wood-destroying basidiomycetes. Application by surface treatment.
• EN 840-1: 2012; Mobile waste and recycling containers. 400-wheel containers with a capacity of up to 2 l for dredgers. Dimensions and design
• EN 840-2: 1997; Mobile waste containers. Four-wheel, flat-top/lidded containers with capacities from 500 l to 1200 l, for trunnion and/or dredge lifting devices. Dimensions and design
• EN 840-2: 2012; Mobile waste and recycling containers. 1300-wheel containers with a capacity of up to 4 l, with flat tops/lids for trunnion and/or dredge lifting devices. Dimensions and design
• EN 840-3: 1997; Mobile waste containers. Four-wheel containers from 770 l to 1300 l with dome lids for trunnion and/or dredge lifting devices. Dimensions and design
• EN 840-3: 2012; Mobile waste and recycling containers. 1300-wheel containers with a capacity of up to 4 l, with dome lid/lid for trunnion and/or dredge lifting devices. Dimensions and design
• EN 840-4: 2012; Mobile waste and recycling containers. 1-wheel containers with a capacity of up to 700 4 l with/with flat lids for wide trunnion or BG- and/or wide dredgers. Dimensions and design
• EN 840-5: 2012; Mobile waste and recycling containers. Performance requirements and test methods
• EN 840-6: 1997; Mobile waste containers. Safety and health requirements
• EN 840-6: 2012; Mobile waste and recycling containers. Safety and health requirements
• EN 841: 1996; Barcoding. Symbology features. Format description.
• EN 842 : 1996+A1 : 2008 ; Machinery safety. Visual distress signals. General requirements, design and testing.
• EN 843-1: 1995; Advanced technical ceramics. Monolithic ceramics. Mechanical properties at room temperature. determination of bending strength
• EN 843-1 : 2006 ; Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature. determination of bending strength
• EN 843-2: 2006; Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature. Determination of Young's modulus, shear modulus and Poisson's ratio
• EN 843-3: 2005; Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature. Determination of subcritical crack growth parameters from constant stress ratio flexural strength tests
• EN 843-4: 2005; Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature. Vickers, Knoop and Rockwell superficial hardness
• EN 843-5: 2006; Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature. statistical analysis
• EN 843-6: 2009; Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature. Guidance for fractographic research
• EN 843-7 : 2010 ; Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature. C-ring tests
• EN 843-8 : 2010 ; Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature. Guidelines for performing evidence tests
• EN 844-1: 1995; Round and sawn timber. terminology. General terms common to round timber and sawn timber
• EN 844-2: 1997; Round and sawn timber. terminology. General terms for round timber
• EN 844-3: 1995; Round and sawn timber. terminology. General terms for sawn timber
• EN 844-4: 1997; Round and sawn timber. terminology. Terms related to moisture content
• EN 844-5: 1997; Round and sawn timber. terminology. Terms related to round timber dimensions
• EN 844-6: 1997; Round and sawn timber. terminology. Terms for sawn timber dimensions
• EN 844-7: 1997; Round and sawn timber. terminology. Terms related to the anatomical structure of wood
• EN 844-8: 1997; Round and sawn timber. terminology. Terms related to the characteristics of round timber
• EN 844-9: 1997; Round and sawn timber. terminology. Terms related to the properties of sawn timber
• EN 844-10: 1998; Round and sawn timber. terminology. Terms related to blemish and fungal attack
• EN 844-11: 1998; Round and sawn timber. terminology. Terms related to degradation by insects
• EN 844-12: 2001; Round and sawn timber. terminology. Additional terms and general
• EN 845-1 : 2013+A1 : 2016 ; Characteristics of auxiliary components for masonry. Wall ties, tethers, hangers and brackets
• EN 845-2 : 2013+A1 : 2016 ; Characteristics of auxiliary components for masonry. lintels
• EN 845-3 : 2013+A1 : 2016 ; Characteristics of auxiliary components for masonry. Mattress joint reinforcement made of steel mesh
• EN 846-2: 2000; Test methods for auxiliary components for masonry. Determination of adhesion strength of prefabricated bed joint reinforcement in mortared joints
• EN 846-3: 2000; Test methods for auxiliary components for masonry. Determination of shear load capacity of welds in prefabricated bed joint reinforcement
• EN 846-5: 2000; Test methods for auxiliary components for masonry. Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (coupling test)
• EN 846-5: 2012; Test methods for auxiliary components for masonry. Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (coupling test)
• EN 846-6: 2000; Test methods for auxiliary components for masonry. Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single-ended test)
• EN 846-6: 2012; Test methods for auxiliary components for masonry. Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single-ended test)
• EN 846-7 : 2000 ; Test methods for auxiliary components for masonry. Determination of shear load capacity and load displacement characteristics of shear ties and shear ties (coupling test for grout joint connection)
• EN 846-7: 2012; Test methods for auxiliary components for masonry. Determination of shear load capacity and load displacement characteristics of shear ties and shear ties (coupling test for grout joint connections)
• EN 846-8 : 2000 ; Test methods for auxiliary components for masonry. Determination of load capacity and load deflection characteristics of beam hangers
• EN 846-9 : 2000 ; Test methods for auxiliary components for masonry. Determination of bending strength and shear resistance of lintels
• EN 846-9 : 2016 ; Test methods for auxiliary components for masonry. Determination of bending strength and shear resistance of lintels
• EN 846-10: 2000; Test methods for auxiliary components for masonry. Determination of the load capacity and load deflection characteristics of consoles
• EN 846-11: 2000; Test methods for auxiliary components for masonry. Determination of the dimensions and bow of the lintels
• EN 846-14: 2012; Test methods for auxiliary components for masonry. Determination of the initial shear strength between the prefabricated part of the composite lintels and the wall above it
• EN 847-1: 1997; Tools for woodworking. Security requirements. Milling tools and circular saw blades

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.