EN European Norm Tests Part 72

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 13025-3: 2005; Packaging. Light gauge metal containers. Round steel and tin containers with removable hood (open hood) with nominal capacities of 20000 ml, 25000 ml and 30000 ml
• EN 13025: 2000; Packaging. Light metal packaging. Nominal filling volumes for round cylindrical and conical general use metal containers up to 40000 ml.
• EN 13026: 2001; Packaging. Light metal packaging. Nominal filling volumes for non-round, cylindrical and conical general use metal containers up to 30 000 ml.
• EN 13027: 2001; Packaging. Light metal packaging. Open top round cans defined by their rated gross lidded capacity.
• EN 13028: 2001; Packaging. Light metal packaging. Open top round cans for beverage products with or without gas, defined by their nominal filling volume.
• EN 13029: 2001; Packaging. Light metal packaging. Openings for snap-on plastic covers.
• EN 13029: 2009; Packaging. Light metal packaging. Openings for snap-on plastic covers.
• EN 13032-1 : 2004+A1 : 2012 ; Light and illumination. Measurement and presentation of photometric data of lamps and fixtures. Measurement and file format
• EN 13032-2: 2004; Light and illumination. Measurement and presentation of photometric data of lamps and fixtures. Data presentation for indoor and outdoor workplaces
• EN 13032-3: 2007; Measurement and presentation of photometric data of lamps and fixtures. Presentation of data for emergency lighting of workplaces
• EN 13032-4: 2015; Light and illumination. Measurement and presentation of photometric data of lamps and fixtures. LED lamps, modules and luminaires
• EN 13034 : 2005+A1 : 2009 ; Protective clothing against liquid chemicals. Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment).
• EN 13035-1: 2008; Machines and plants for the production, processing and processing of flat glass. Security requirements. Storage, handling and transportation equipment within the factory
• EN 13035-2: 2008; Machines and plants for the production, processing and processing of flat glass. Security requirements. Storage, handling and transportation equipment outside the factory
• EN 13035-5 : 2006+A1 : 2009 ; Machines and plants for the production, processing and processing of flat glass. Security requirements. Machines and plants for stacking and stacking
• EN 13035-6 : 2006+A1 : 2009 ; Machines and plants for the production, processing and processing of flat glass. Security requirements. machines for escape
• EN 13035-7 : 2006+A1 : 2009 ; Machines and plants for the production, processing and processing of flat glass. Security requirements. Cutting machines for laminated glass
• EN 13035-9 : 2006+A1 : 2010 ; Machines and plants for the production, processing and processing of flat glass. Security requirements. Washing facilities
• EN 13035-11 : 2006+A1 : 2010 ; Machines and plants for the production, processing and processing of flat glass. Security requirements. drilling machines
• EN 13036-1: 2010; Road and airport surface features. Test methods. Measurement of coating surface macrotexture depth using a volumetric patch technique
• EN 13036-4: 2011; Road and airport surface features. Test methods . Method of measuring the slip/slip resistance of a surface: Pendulum test
• EN 13036-6: 2008; Road and airport surface features. Test methods. Measurement of transverse and longitudinal profiles in the uniformity and mega tissue wavelength ranges
• EN 13036-8 : 2008 ; Road and airport surface features. Test methods. Determination of transverse unevenness indices
• EN 13037: 2000; Soil improvers and growing medium. pH determination.
• EN 13037: 2011; Soil improvers and growing medium. pH determination.
• EN 13038: 2000; Soil improvers and growing medium. Determination of electrical conductivity.
• EN 13038: 2011; Soil improvers and growing medium. Determination of electrical conductivity.
• EN 13039: 2000; Soil improvers and growing medium. Organic matter content and ash determination.
• EN 13039: 2011; Soil improvers and growing medium. Organic matter content and ash determination.
• EN 13040: 2000; Soil improvers and growing medium. Sample preparation for chemical and physical testing, determination of dry matter content, moisture content and compacted bulk density in the laboratory.
• EN 13040: 2007; Soil improvers and growing medium. Sample preparation for chemical and physical testing, determination of dry matter content, moisture content and compacted bulk density in the laboratory.
• EN 13041: 2000; Soil improvers and growing medium. Determination of physical properties. Dry bulk density, air volume, water volume, shrinkage value and total pore area.
• EN 13041: 2011; Soil improvers and growing medium. Determination of physical properties. Dry bulk density, air volume, water volume, shrinkage value and total pore area.
• EN 13042-1 : 2007+A1 : 2009 ; Machines and plants for the production, processing and processing of hollow glass. Security requirements. gob feeder
• EN 13042-3 : 2007+A1 : 2009 ; Machines and plants for the production, processing and processing of hollow glass. Security requirements. Business Machines
• EN 13043: 2013; Bituminous mixes and aggregates for surface treatment for roads, airports and other trafficked areas.
• EN 13044-1: 2011; Intermodal Loading Units. Marking. Identification marks
• EN 13044-2: 2011; Intermodal loading units. Marking. Markings of clearing bodies associated with railway operation
• EN 13044-3: 2011; Intermodal Loading Units. Marking. Signs of semi-trailers related to rail operation
• EN 13044: 2001; Change bodies. Coding, identification and marking.
• EN 13045: 2000; Packaging. Flexible cylindrical plastic pipes. Dimensions and tolerances.
• EN 13045: 2009; Packaging. Flexible cylindrical plastic pipes. Dimensions and tolerances.
• EN 13046: 2000; Packaging. Flexible cylindrical metallic pipes. Dimensions and tolerances.
• EN 13047: 2000; Packaging. Flexible conical metal pipes. Dimensions and tolerances.
• EN 13048: 2000; Packaging. Flexible aluminum pipes. Inner lacquer film thickness measurement method.
• EN 13048: 2009; Packaging. Flexible aluminum pipes. Inner lacquer film thickness measurement method.
• EN 13050: 2011; Curtain wall. waterproof Laboratory test under dynamic air pressure and water spray condition.
• EN 13053 : 2006+A1 : 2011 ; Ventilation for buildings. Air handling units. Rating and performance for units, components and divisions.
• EN 13054: 2001; Packaging. Complete, filled transport packages. Test methods for determining the center of gravity of a package.
• EN 13056: 2000; Inland navigation vessels. Stairs with an inclination angle of 30 degrees to 0L 45 degrees. Requirements, types.
• EN 13061: 2009; Protective clothing. Shin guards for association football players. Requirements and test methods.
• EN 13063-1: 2005; chimneys. Clay/ceramic chimney lined system chimneys. Requirements and test methods for soot fire resistance
• EN 13063-2: 2005; chimneys. Clay/ceramic chimney lined system chimneys. Requirements and test methods under wet conditions
• EN 13063-3: 2007; chimneys. Clay/ceramic chimney lined system chimneys. Requirements and test methods for flue system chimneys
• EN 13067: 2012; Plastic welding personnel. Welders' qualification test. Thermoplastic welded assemblies.
• EN 13068-1 : 2000 ; Non-destructive testing. Radioscopic tests. Quantitative measurement of imaging properties
• EN 13068-2: 2000; Non-destructive testing. Radioscopic tests. Checking the long-term stability of imaging devices
• EN 13069 : 2005 ; chimneys. Clay/ceramic exterior walls for system chimneys. Requirements and test methods.
• EN 13071-1:2008; Fixed waste containers up to 5000 l, raised from the top and emptied from the bottom. General Requirements
• EN 13071-2 : 2008+A1 : 2013 ; Fixed waste containers up to 5 000 l, raised from the top and emptied from the bottom. Additional requirements for underground or partially underground systems
• EN 13071-3: 2011; Fixed waste containers up to 5000 l, raised from the top and emptied from the bottom. Recommended uninstall links
• EN 13073: 2001; Shoes. Test methods for all shoes. water resistance.
• EN 13074-1: 2011; Bitumen and bituminous binders. Binder recovery from bituminous emulsion or cut-back or fluxed bituminous binders. Recovery by evaporation
• EN 13074-2: 2011; Bitumen and bituminous binders. Binder recovery from bituminous emulsion or cut-back or fluxed bituminous binders. Stabilization after recovery by evaporation
• EN 13075-1: 2009; Bitumen and bituminous binders. Determination of fracture behavior. Determination of breakage value of cationic bitumen emulsions, mineral filling method
• EN 13075-1: 2016; Bitumen and bituminous binders. Determination of fracture behavior. Determination of breakage value of cationic bitumen emulsions, mineral filling method
• EN 13075-2: 2009; Bitumen and bituminous binders. Determination of fracture behavior. Determination of fine powder mixing times of cationic bituminous emulsions
• EN 13075-2: 2016; Bitumen and bituminous binders. Determination of fracture behavior. Determination of fine powder mixing times of cationic bituminous emulsions
• EN 13077 : 2008 ; Devices that prevent pollution by backflow of drinking water. Air gap (unlimited) with non-circular overflow. Family A. Type B.
• EN 13081: 2001; Tanks for the transport of dangerous goods. Service equipment for tanks. Vapor collection adapter and coupler.
• EN 13081 : 2008+A1 : 2012 ; Tanks for the transport of dangerous goods. Service equipment for tanks. Vapor collection adapter and coupler.
• EN 13082: 2001; Tanks for the transport of dangerous goods. Service equipment for tanks. Steam transfer valve.
• EN 13082 : 2008+A1 : 2012 ; Tanks for the transport of dangerous goods. Service equipment for tanks. Steam transfer valve.
• EN 13083: 2001; Tanks for the transport of dangerous goods. Service equipment for tanks. Adapter for bottom loading and unloading.
• EN 13083 : 2008+A1 : 2013 ; Tanks for the transport of dangerous goods. Service equipment for tanks. Adapter for bottom loading and unloading.
• EN 13084-1: 2007; Independent chimneys. General Requirements
• EN 13084-2: 2007; Independent chimneys. concrete chimneys
• EN 13084-4: 2005; Independent chimneys. Brick liners. Design and implementation
• EN 13084-5: 2005; Independent chimneys. Material for brick linings. Product features
• EN 13084-6: 2004; Independent chimneys. Steel liners. Design and implementation
• EN 13084-7:2005; Independent chimneys. Product features of cylindrical steel fabrications used in single-walled steel chimneys and steel liners
• EN 13084-7: 2012; Independent chimneys. Product features of cylindrical steel fabrications used in single-walled steel chimneys and steel liners
• EN 13084-8:2005; Independent industrial chimneys. Design and implementation of mast construction with satellite components
• EN 13085: 2001; Wall coverings Specification for cork rolls.
• EN 13087-1 : 2000 ; Protective helmets. Test methods. Conditions and conditioning
• EN 13087-2: 2000; Protective helmets. Test methods. shock absorption
• EN 13087-2: 2012; Protective helmets. Test methods. shock absorption
• EN 13087-3: 2000; Protective helmets. Test methods. Penetration resistance
• EN 13087-4: 2000; Protective helmets. Test methods. Retention system effectiveness
• EN 13087-4: 2012; Protective helmets. Test methods. Retention system effectiveness
• EN 13087-5: 2012; Protective helmets. Test methods. Retention system strength
• EN 13087-6: 2000; Protective helmets. Test methods. Field of view
• EN 13087-6: 2012; Protective helmets. Test methods. Field of view
• EN 13087-7: 2000; Protective helmets. Test methods. flame resistance
• EN 13087-10: 2012; Protective helmets. Test methods. Resistance to radiant heat
• EN 13088: 2001; Finished products stuffed with feathers and down. Method for determining the total mass of a filled product and the mass of the filling.
• EN 13089: 1999; Mountaineering equipment. Ice tools. Security requirements and test methods.
• EN 13089 : 2011+A1 : 2015 ; Mountaineering equipment. Ice tools. Security requirements and test methods.
• EN 13091: 2000; Biotechnology. Performance criteria for filter elements and filtration devices.
• EN 13092: 2000; Biotechnology. Guidance on sampling and vaccination procedures.

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.