EN European Norm Tests Part 69

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 12764 : 2004+A1 : 2008 ; Sanitary appliances. Specification for whirlpool baths.
• EN 12765: 2016; Classification of thermosetting wood adhesives for non-structural applications.
• EN 12766-1 : 2000 ; Test methods for petroleum and its products. Petroleum products and used oils. Identification of PCBs and related products. Separation and identification of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD)
• EN 12767: 2000; Passive safety of support structures for road equipment. Requirements and test methods.
• EN 12767 : 2007 ; Passive safety of support structures for road equipment. Requirements, classification and test methods.
• EN 12770: 2000; Shoes. Test methods for outsoles. Wear resistance.
• EN 12771: 2000; Shoes. Test methods for outsoles. Tear power.
• EN 12772: 2000; Shoes. Test methods for outsoles. Dimensional stability.
• EN 12773: 2000; Shoes. Test methods for outsoles. Needle tear strength.
• EN 12774: 2000; Shoes. Test methods for outsoles. Determination of split tear strength and delamination resistance.
• EN 12775 : 2001 ; Solid wood panels. Classification and terminology.
• EN 12779 : 2004+A1 : 2009 ; The safety of woodworking machinery. Fixed installation chip and dust extraction systems. Safety-related performances and safety requirements.
• EN 12779 : 2015 ; The safety of woodworking machinery. Fixed installation chip and dust extraction systems. Security requirements.
• EN 12781: 2001; Wall coverings Specifications for cork panels.
• EN 12782: 2000; Shoes. Test methods for insoles. Resistance to seam tearing.
• EN 12784 : 2000 ; Shoes. Test methods for all shoes. Thermal insulation.
• EN 12785: 2000; Shoes. Test methods for all shoes. Heel attachment.
• EN 12786: 1999; Machinery safety. Guide to the preparation of vibration clauses of safety standards.
• EN 12786 : 2013 ; Machinery safety. Requirements for the preparation of vibration articles of safety standards.
• EN 12788 : 2005 ; Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of flexural strength.
• EN 12790: 2009; Child use and care articles. Recumbent bassinets.
• EN 12791: 2005; Chemical disinfectants and antiseptics. Surgical hand disinfection. Test method and requirement (phase 2/step 2).
• EN 12791: 2016; Chemical disinfectants and antiseptics. Surgical hand disinfection. Test method and requirements (stage 2, step 2).
• EN 12794: 2005; Precast concrete products. Foundation stacks.
• EN 12797: 2000; Soldering. Destructive testing of soldered connections.
• EN 12798 : 1999 ; Transport quality system. Road, rail and inland sea transport. Additional quality system requirements to BS EN ISO 9002 for the transport of dangerous goods with regard to safety.
• EN 12798 : 2007 ; Transport quality management system. Road rail and inland navigation transport. Additional quality management system requirements to EN ISO 9001 for the transport of safety hazardous materials.
• EN 12799: 2000; Soldering. Non-destructive testing of brazed joints.
• EN 12800: 2000; Shoes. Test methods for insoles. Dimensional stability.
• EN 12801: 2000; Shoes. Test methods for insoles, lining and inner socks. Sweating resistance.
• EN 12802: 2000; Road marking materials. Laboratory methods for identification.
• EN 12802: 2011; Road marking materials. Laboratory methods for identification.
• EN 12803: 2000; Shoes. Test methods for outsoles. Tensile strength and elongation.
• EN 12807: 2009; LPG equipment and accessories. Portable refillable brazed steel cylinders for liquefied petroleum gas (LPG). Design and construction.
• EN 12808-1: 1999; Adhesives and grouts for tiles. Determination of chemical resistance of reaction resin mortars
• EN 12808-1 : 2008 ; Mortars for tiles. Determination of chemical resistance of reaction resin mortars
• EN 12808-2: 2008; Mortars for tiles. Determination of resistance to wear
• EN 12808-3: 2008; Mortars for tiles. Determination of bending and compressive strength
• EN 12808-4: 2009; Mortars for tiles. shrinkage determination
• EN 12808-5: 2008; Mortars for tiles. Determination of water absorption
• EN 12811-4: 2013; Temporary work equipment. Protection fans for piers. Performance requirements and product design
• EN 12812 : 2008 ; Pattern. Performance requirements and overall design.
• EN 12814-1 : 2000 ; Testing of welded joints of thermoplastic semi-finished products. bending test
• EN 12814-2 : 2000 ; Testing of welded joints of thermoplastic semi-finished products. tensile test
• EN 12814-3: 2000; Testing of welded joints of thermoplastic semi-finished products. tensile creep test
• EN 12814-3: 2014; Testing of welded joints in thermoplastic semi-finished products. tensile creep test
• EN 12814-6 : 2000 ; Testing of welded joints of thermoplastic semi-finished products. Low temperature tensile test
• EN 12816: 2001; Portable refillable steel and aluminum LPG cylinders. to destroy.
• EN 12816 : 2010 ; LPG equipment and accessories. Portable refillable LPG cylinders. to destroy.
• EN 12817 : 2010 ; LPG equipment and accessories. Inspection and requalification of LPG tanks up to and including 13 m$u3;
• EN 12819 : 2009 ; LPG equipment and accessories. Inspection and requalification of LPG tanks larger than 13 m$u3;
• EN 12821: 2000; Foodstuffs. Determination of vitamin D by high performance liquid chromatography. Measurement of cholecalciferol (D$d3) and ergocalciferol (D$d2).
• EN 12821: 2009; Foodstuffs. Determination of vitamin D by high performance liquid chromatography. Measurement of cholecalciferol (D3) or ergocalciferol (D2).
• EN 12822: 2000; Foodstuffs. Determination of vitamin E by high performance liquid chromatography. Measurement of $Ga-, $Gb-, $Gg- and $Gd-tocopherols.
• EN 12822: 2014; Foodstuffs. Determination of vitamin E by high performance liquid chromatography. $Ga-, $Gb-, $Gg- and $Gd-tocopherol measurement.
• EN 12823-1 : 2000 ; Foodstuffs. Determination of vitamin A by high performance liquid chromatography. Measurement of all-trans-retinol and 13-cis-retinol
• EN 12823-1: 2014; Foodstuffs. Determination of vitamin A by high performance liquid chromatography. All-E-retinol and 13-Z-retinol measurement
• EN 12823-2: 2000; Foodstuffs. Determination of vitamin A by high performance liquid chromatography. $GB-carotene measurement
• EN 12824: 1998; Microbiology of food and animal feed. Horizontal method for detection of Salmonella.
• EN 12826: 2000; Shoes. Test methods for lining and inner socks. Static friction.
• EN 12827 : 1999 ; Inland navigation vessels. Connections for the transfer of diesel oil.
• EN 12828 : 2012+A1 : 2014 ; Heating systems in buildings. Design for water-based heating systems.
• EN 12829: 1998; Surfactants. Preparation of water with known calcium hardness.
• EN 12829: 2011; Surfactants. Preparation of waters with known calcium and magnesium hardness.
• EN 12830: 1999; Temperature recorders for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream. Tests, performance and compliance.
• EN 12832: 1999; Characterization of sludges. Use and disposal of sludge. Vocabulary.
• EN 12838: 2000; Plants and equipment for liquefied natural gas. Compliance tests of LNG sampling systems.
• EN 12839: 2012; Precast concrete products. Elements for fences.
• EN 12840: 2001; Safety of machine tools. Manually controlled turning machines with or without automatic control.
• EN 12841 : 2006 ; Personal fall protection equipment. Rope access systems. Rope setting devices.
• EN 12842: 2000; Ductile iron fittings for PVC-U or PE piping systems. Requirements and test methods.
• EN 12842: 2012; Ductile iron fittings for PVC-U or PE piping systems. Requirements and test methods.
• EN 12844: 1998; Zinc and zinc alloys. Castings. Features
• EN 12845: 2015; Fixed fire extinguishing systems. Automatic sprinkler systems. Design, installation and maintenance.
• EN 12846-1: 2011; Bitumen and bituminous binders. Determination of flow time with flow viscometer. Bituminous emulsions
• EN 12846-2: 2011; Bitumen and bituminous binders. Determination of flow time with flow viscometer. Cut-back and fluxed bituminous binders
• EN 12847: 2009; Bitumen and bituminous binders. Determination of slump tendency of bituminous emulsions.
• EN 12848: 2009; Bitumen and bituminous binders. Determination of the mixing stability of bituminous emulsions with cement.
• EN 12849 : 2009 ; Bitumen and bituminous binders. Determination of penetration power of bituminous emulsions.
• EN 12850 : 2009 ; Bitumen and bituminous binders. Determination of pH value of bituminous emulsions.
• EN 12851 : 2005+A1 : 2010 ; Food processing machinery. Catering attachments for machines with an auxiliary drive hub. Safety and hygiene requirements.
• EN 12856: 1999; Foodstuffs. Determination of acesulfame-K, aspartame and saccharin. High performance liquid chromatographic method.
• EN 12857 : 1999 ; Foodstuffs. Cyclamate determination. High performance liquid chromatographic method.
• EN 12858 : 1999 ; Paper. Print and business paper. Constant stationery requirements.
• EN 12859 : 2008 ; Gypsum blocks. Definitions, requirements and test methods.
• EN 12859 : 2011 ; Gypsum blocks. Definitions, requirements and test methods.
• EN 12862: 2000; Portable gas cylinders. Specification for the design and construction of refillable portable welded aluminum alloy gas cylinders.
• EN 12865: 2001; Hygrothermal performance of building components and building elements. Determination of the resistance of exterior wall systems to heavy rain under pulsed air pressure.
• EN 12868: 1999; Child use and care articles. Methods for determining the release of N-nitrosamines and N-nitrosatable substances from elastomer or rubber pacifiers and pacifiers.
• EN 12871 : 2010 ; Wood based panels. Performance characteristics and requirements for load bearing plates for use on floors, walls and roofs.
• EN 12871: 2013; Wood based panels. Determination of the performance characteristics of load-bearing panels used in floors, roofs and walls.
• EN 12873-1: 2014; The impact of materials on water intended for human consumption. Impact due to migration. Test method for factory-made products made from or containing organic or vitreous (porcelain/glassy enamel) materials
• EN 12873-2: 2005; The impact of materials on water intended for human consumption. Impact due to migration. Test method for non-metallic and cement-free field applied materials
• EN 12873-3: 2006; The impact of materials on water intended for human consumption. Impact due to migration. Test method for ion exchange and adsorbent resins
• EN 12873-4: 2006; The impact of materials on water intended for human consumption. Impact due to migration. Test method for water treatment membranes
• EN 12874: 2001; Flame arresters. Performance requirements, test methods and usage limits.
• EN 12875-1: 2005; Mechanical dishwashing resistance of dishes. Reference test method for domestic products
• EN 12875-4: 2006; Mechanical dishwashing resistance of dishes. Rapid test for domestic ceramic products
• EN 12875-5: 2006; Mechanical dishwashing resistance of dishes. Rapid test for ceramic dinnerware
• EN 12876: 2009; Chemicals used in the treatment of water intended for human consumption. Oxygen.

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.