EN European Norm Tests Part 18

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 939: 2016; Chemicals used in the treatment of water intended for human consumption. Hydrochloric acid.
• EN 940: 1997; The safety of woodworking machinery. Combined woodworking machines.
• EN 940 : 2009+A1 : 2012 ; The safety of woodworking machinery. Combined woodworking machines.
• EN 941: 1996; Aluminum and aluminum alloys. Flat and flat stock for general applications. Features
• EN 941: 2014; Aluminum and aluminum alloys. Flat and flat stock for the manufacture of general applications. Features
• EN 942: 1996; Timber in joinery. General classification of wood quality.
• EN 943-1 : 2015 ; Protective clothing against hazardous solid, liquid and gaseous chemicals, including liquid and solid aerosols. Performance requirements for type 1 (gas-tight) chemical protective clothing
• EN 947: 1999; Hinged or revolving doors. Determination of resistance to vertical load.
• EN 948: 1999; Hinged or revolving doors. Determination of resistance to static torsion.
• EN 949 : 1999 ; Windows and curtain walls, doors, shutters and shutters. Determination of resistance to soft and heavy body impacts for doors.
• EN 950 : 1999 ; Door leaves. Determination of resistance to hard object impact.
• EN 951: 1999; Door leaves. Height, width, thickness and squareness measurement method.
• EN 952: 1999; Door leaves. General and local plain. Measurement method.
• EN 953 : 1997+A1 : 2009 ; Machinery safety. guards. General requirements for the design and construction of fixed and mobile guards.
• EN 954-1: 1997; Machinery safety. Safety-related parts of control systems. General principles for design
• EN 955-2: 1995; Chemical analysis of refractory products. Products containing silica and/or alumina (wet method)
• EN 957-1: 1997; Fixed training equipment. General safety requirements and test methods
• EN 957-1: 2005; Fixed training equipment. General safety requirements and test methods
• EN 957-2: 1997; Fixed training equipment. Strength training equipment. Additional specific security requirements and test methods
• EN 957-4: 1997; Fixed training equipment. Strength training benches. Additional specific security requirements and test methods
• EN 957-4 : 2006+A1 : 2010 ; Fixed training equipment. Strength training benches, additional special safety requirements and test methods
• EN 957-5: 1997; Fixed training equipment. Pedal crank training equipment. Additional specific security requirements and test methods
• EN 957-5: 2009; Fixed training equipment. Stationary exercise bikes and upper body crank training equipment, additional special safety requirements and test methods
• EN 957-6 : 2010+A1 : 2014 ; Fixed training equipment. Treadmills, additional special safety requirements and test methods
• EN 957-7: 1999; Fixed training equipment. Rowing machines, additional special safety requirements and test methods
• EN 957-8: 1998; Fixed training equipment. Steppers, stair climbers and climbers. Additional specific security requirements and test methods
• EN 957-10: 2005; Fixed training equipment. Fixed-wheel or free-wheel exercise bikes, additional special safety requirements and test methods
• EN 958: 1997; Mountaineering equipment. Energy absorbing systems for use in climbing Klettersteig (via ferrata). Security requirements and test methods.
• EN 958 : 2006+A1 : 2010 ; Mountaineering equipment. Energy absorbing systems for use in climbing Klettersteig (via ferrata). Security requirements and test methods.
• EN 959: 1997; Mountaineering equipment. Rock anchors. Security requirements and test methods.
• EN 959: 2007; Mountaineering equipment. Rock anchors. Security requirements and test methods.
• EN 960: 1995; Head forms for use in testing protective helmets.
• EN 960: 2006; Head forms for use in testing protective helmets.
• EN 961: 1996; Gas welding equipment. Manifold regulators for welding, cutting and similar operations up to 200 bar.
• EN 962: 1997; Portable gas cylinders. Valve protection caps and valve guards for industrial and medical gas cylinders. Design, construction and testing.
• EN 963: 1995; Geotextile and geotextile related products. Sampling and preparation of test samples.
• EN 964-1 : 1995 ; Geotextile and geotextile related products. Thickness determination at specified pressures. single layers
• EN 965: 1995; Geotextile and geotextile related products. Determination of mass per unit area.
• EN 969: 1996; Features of ductile iron pipes, fittings, accessories and their connections for gas pipelines. Requirements and test methods.
• EN 969: 2009; Ductile iron pipes, fittings, accessories and their connections for gas pipelines. Requirements and test methods.
• EN 971-1: 1996; Paints and varnishes. Terms and definitions for coating materials. general terms
• EN 972 : 1998+A1 : 2010 ; Tannery machines. Piston cylinder machines. Security requirements.
• EN 973: 2009; Chemicals used in the treatment of water intended for human consumption. Sodium chloride for regeneration of ion exchangers.
• EN 974: 1997; Chemicals used in the treatment of water intended for human consumption. Phosphoric acid.
• EN 975-1: 1996; Timber. Appearance classification of hardwoods. oak and beech
• EN 975-1: 2009; Timber. Appearance classification of hardwoods. oak and beech
• EN 975-2: 2004; Timber. Appearance classification of hardwoods. Poplar
• EN 976-1: 1997; Underground tanks of glass reinforced plastics (GRP). Horizontal cylindrical tanks for the unpressurized storage of liquid petroleum-based fuels. Requirements and test methods for single wall tanks
• EN 976-2: 1997; Underground tanks of glass reinforced plastics (GRP). Horizontal cylindrical tanks for the unpressurized storage of liquid petroleum-based fuels. Transport, handling, storage and assembly of single wall tanks
• EN 977: 1998; Underground tanks of glass reinforced plastics (GRP). Method of unilateral exposure to liquids.
• EN 978: 1997; Underground tanks of glass reinforced plastics (GRP). Determination of factor $Ga and factor $Gb.
• EN 980: 1997; Graphic symbols for use in labeling medical devices.
• EN 980 : 2008 ; Symbols to be used in the labeling of medical devices.
• EN 981 : 1996+A1 : 2008 ; Machinery safety. Auditory and visual distress and information signals system.
• EN 982 : 1996+A1 : 2008 ; Machinery safety. Safety requirements for fluid power systems and components. Hydraulic.
• EN 983 : 1996+A1 : 2008 ; Machinery safety. Safety requirements for fluid power systems and components. Pneumatic.
• EN 984: 1995; Determination of the mass per unit area of ​​the use surface of needled floor coverings.
• EN 986: 1995; Textile floor coverings. Tile. Determination of dimensional changes and out-of-plane distortion with the effect of changing water and temperature conditions.
• EN 986: 2005; Textile floor coverings. Tile. Determination of dimensional changes and out-of-plane distortion with the effect of changing water and temperature conditions.
• EN 988: 1997; Zinc and zinc alloys. Specification for rolled flat products for building.
• EN 989: 1996; Determination of bonding behavior between reinforcing bars and autoclaved aerated concrete by 'push' test.
• EN 990: 1996; Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and open-structured lightweight aggregate concrete.
• EN 991: 1996; Determination of the dimensions of prefabricated reinforced components made of autoclaved aerated concrete or open-structured lightweight aggregate concrete.
• EN 992: 1996; Determination of dry density of light aggregate concrete with open structure.
• EN 993-1: 1995; Test methods for densely shaped refractory products. Determination of bulk density, apparent porosity and actual porosity
• EN 993-2: 1995; Test methods for densely shaped refractory products. Determination of true density
• EN 993-3: 1997; Test methods for densely shaped refractory products. Test methods for carbon containing refractories
• EN 993-4: 1995; Test methods for densely shaped refractory products. Determination of permeability to gases
• EN 993-5: 2000; Test methods for densely shaped refractory products. Determination of cold breaking strength
• EN 993-6: 1995; Test methods for densely shaped refractory products. Determination of tear modulus at ambient temperature
• EN 993-7: 2000; Test methods for densely shaped refractory products. Determination of the tear modulus at high temperatures
• EN 993-8: 1997; Test methods for densely shaped refractory products. Determination of refractoriness under load
• EN 993-9: 1997; Test methods for densely shaped refractory products. Determination of creep in compression
• EN 993-10: 1998; Test methods for densely shaped refractory products. Determination of permanent change in dimensions on heating
• EN 993-11: 2007; Test methods for densely shaped refractory products. Determination of resistance to thermal shock
• EN 993-13 : 1995 ; Test methods for densely shaped refractory products. Features of pyrometric reference cones for laboratory use
• EN 993-14: 1998; Test methods for densely shaped refractory products. Determination of thermal conductivity by hot wire (cross array) method
• EN 993-15: 1998; Test methods for densely shaped refractory products. Determination of thermal conductivity by hot wire (parallel) method
• EN 993-15 : 2005 ; Test methods for densely shaped refractory products. Determination of thermal conductivity by hot wire (parallel) method
• EN 993-16: 1995; Test methods for densely shaped refractory products. Determination of sulfuric acid resistance
• EN 993-17: 1999; Test methods for densely shaped refractory products. Determination of bulk density of granular materials by vacuum mercury method
• EN 994: 1996; Textile floor coverings. Determination of the side lengths, squareness and flatness of tiles.
• EN 994: 2012; Textile floor coverings. Determination of the side lengths, squareness and flatness of tiles.
• EN 995: 1996; Textile floor coverings. Evaluation of the creep of supports.
• EN 996 : 1995+A3 : 2009 ; Pile equipment. Security requirements.
• EN 997 : 2012+A1 : 2015 ; WC pans and WC pans with integrated flushing.
• EN 998-1 : 2010 ; Mortar specification for masonry. Render and plaster mortar
• EN 998-1 : 2016 ; Mortar specification for masonry. Render and plaster mortar
• EN 998-2: 2010; Mortar specification for masonry. wall mortar
• EN 998-2: 2016; Mortar specification for masonry. wall mortar
• EN 999 : 1998+A1 : 2008 ; Machinery safety. Positioning of protective equipment according to the approach velocities of parts of the human body.
• EN 1001-1:2005; Durability of wood and wood-based products. terminology. List of equivalent terms
• EN 1001-2: 2005; Durability of wood and wood-based products. terminology. Vocabulary
• EN 1004: 2004; Mobile access and work towers made of prefabricated elements. Materials, dimensions, design loads, safety and performance requirements.
• EN 1005-4 : 2005+A1 : 2008 ; Machinery safety. Human physical performance. Evaluation of working postures and movements related to machines
• EN 1005-5: 2007; Machinery safety. Human physical performance. Risk assessment for high frequency repetitive processing
• EN 1006: 2009; Advanced technical ceramics. Monolithic ceramics. Guidance on the selection of test pieces for the evaluation of properties.
• EN 1007-4: 2004; Advanced technical ceramics. Ceramic composites. Test methods for supplements. Determination of tensile properties of filaments at ambient temperature
• EN 1007-5: 2010; Advanced technical ceramics. Ceramic composites. Test methods for supplements. Determination of tensile strength and tensile stress distribution of filaments up to rupture in a multifilament draw at ambient temperature
• EN 1007-6: 2007; Advanced technical ceramics. Ceramic composites. Test methods for supplements. Determination of tensile properties of filaments at high temperature

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.