EN European Norm Tests Part 128

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 60512-23-7 : 2005 ; Connectors for electronic equipment. Tests and measurements. Scanning and filtering tests. Try 23g. Effective transfer impedance of connectors
• EN 60512-25-7: 2005; Connectors for electronic equipment. Tests and measurements. Try 25g. Impedance, reflection coefficient and voltage standing wave ratio (VSWR)
• EN 60512-8-1 : 2010 ; Connectors for electronic equipment. Tests and measurements. Static load tests (fixed connectors). Try 8a. Static load, transverse
• EN 60512-8-2: 2011; Connectors for electronic equipment. Tests and measurements. Static load tests (fixed connectors). Try 8b. Static load, axial
• EN 60512-8-3: 2011; Connectors for electronic equipment. Tests and measurements. Static load tests (fixed connectors). Try 8c. Operating lever stability
• EN 60512-15-8: 1997; Electromechanical components for electronic equipment. Basic test procedures and measurement methods. Mechanical tests on contacts and terminations. Try for 15 hours. Contact holding system resistance to tool application
• EN 60512-16-8 : 2008 ; Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. 16h test. Efficiency of insulated coupling (crimp connections)
• EN 60512-9-1 : 2010 ; Connectors for electronic equipment. Tests and measurements. Endurance tests. Try 9a. mechanical work
• EN 60512-9-2 : 2012 ; Connectors for electronic equipment. Tests and measurements. Endurance tests. Test 9b. electric charge and temperature
• EN 60512-9-3 : 2006 ; Connectors for electronic equipment. Tests and measurements. Endurance tests. Try 9c. Mechanical operation with electrical load (locking/disconnecting)
• EN 60512-9-3 : 2011 ; Connectors for electronic equipment. Tests and measurements. Endurance tests. Try 9c. Mechanical operation with electrical load (locking/disconnecting)
• EN 60512-9-4: 2011; Connectors for electronic equipment. Tests and measurements. Endurance tests. Test 9d. Contact holding system and durability of seals (maintenance, aging)
• EN 60512-9-5 : 2010 ; Connectors for electronic equipment. Tests and measurements. Endurance tests. Test 9e. Current loading, cyclic
• EN 60512-16-9 : 2008 ; Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Try 16i. Earthing contact spring holding force
• EN 60512-25-9 : 2008 ; Connectors for electronic equipment. Tests and measurements. Signal integrity tests. Test the 25i. alien entanglement
• EN 60512-10-4: 1997; Connectors for electronic equipment. Tests and measurements. Impact tests (free components), static load tests (fixed components), endurance tests and overload tests. Try 10d. Electrical overload (connectors)
• EN 60512-11-1 : 1999 ; Electromechanical components for electronic equipment. Basic test procedures and measurement methods. Climate tests. Try 11a. climate order
• EN 60512-11-7: 1997; Connectors for electronic equipment. Tests and measurements. Climate tests. Try 11g. Flowing mixed gas corrosion test
• EN 60512-11-8 : 1999 ; Electromechanical components for electronic equipment. Basic test procedures and measurement methods. Climate tests. Test 11h. sand and dust
• EN 60512-11-14 : 1997 ; Connectors for electronic equipment. Tests and measurements. Climate tests. Test 11p. Flowing single gas corrosion test
• EN 60512-16-11 : 2008 ; Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. 16k test. Stripping force, solderless wound connections
• EN 60512-12-1 : 2006 ; Connectors for electronic equipment. Tests and measurements. Soldering tests
• EN 60512-12-2 : 2006 ; Connectors for electronic equipment. Tests and measurements. Soldering tests. Try 12b. Solderability, wetting, soldering iron method
• EN 60512-12-3 : 2006 ; Connectors for electronic equipment. Tests and measurements. Soldering tests
• EN 60512-12-4 : 2006 ; Connectors for electronic equipment. Tests and measurements. Soldering tests. Try 12d. Soldering heat resistance, solder bath method
• EN 60512-12-5 : 2006 ; Connectors for electronic equipment. Tests and measurements. Soldering tests. Try 12e. Resistance to soldering heat, soldering iron method
• EN 60512-12-6: 1997; Electromechanical components for electronic equipment. Basic test procedures and measurement methods. Soldering tests. Test the 12f. Sealing against flux and cleaning solvents in machine soldering
• EN 60512-1-100 : 2006 ; Connectors for electronic equipment. Tests and measurements.. General
• EN 60512-1-100 : 2012 ; Connectors for electronic equipment. Tests and measurements. General. Applicable publications
• EN 60512-16-13 : 2008 ; Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16m. Unwound, solderless wound connections
• EN 60512-16-14 : 2008 ; Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16n. Bending strength, fixed male nails
• EN 60512-16-16 : 2008 ; Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Try 16p. Torsional strength, fixed male nails
• EN 60512-16-17 : 2008 ; Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Take the 16q test. Tensile and compressive strength, fixed male nails
• EN 60512-16-18 : 2008 ; Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Try the 16r. Deviation of contacts, simulation
• EN 60512-16-20: 1997; Electromechanical components for electronic equipment. Basic test procedures and measurement methods. Mechanical tests on contacts and terminations. Test 16t. Mechanical strength (wired termination of solderless connections)
• EN 60512-16-21 : 2012 ; Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test the 16u. Mustache test by application of external mechanical stresses
• EN 60512-26-100 : 2008+A1 : 2011 ; Connectors for electronic equipment. Tests and measurements. Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 Tests 26a - 26g
• EN 60512-27-100 : 2012 ; Connectors for electronic equipment. Tests and measurements. Signal integrity tests up to 60603 MHz on IEC 7-500 series connectors. Tests from 27a to 27g
• EN 60512-28-100 : 2013 ; Connectors for electronic equipment. Tests and measurements. Signal integrity tests up to 60603 MHz on IEC 7-61076 and IEC 3-1000 series connectors. Tests from 28a to 28g
• EN 60512-29-100 : 2015 ; Connectors for electronic equipment. Tests and measurements. Signal integrity tests up to 12 MHz on M500 style connectors. Tests from 29a to 29g
• EN 60512-99-001: 2012; Connectors for electronic equipment. Tests and measurements. Test program for connecting and disconnecting connectors under electrical load. Test 99a : Connectors used in twisted pair communication cables with remote power
• EN 60514: 1995; Acceptance inspection of class 2 alternating current watthour meters.
• EN 60517: 1997; Gas-insulated metal-enclosed switchgear for rated voltages of 72;5 kV and above.
• EN 60519-1 : 1993 ; Safety in electroheat installations. General Requirements
• EN 60519-1: 2011; Safety in electric heating installations. General Requirements
• EN 60519-1 : 2015 ; Safety in electro-heating and electromagnetic treatment installations. General Requirements
• EN 60519-2 : 1994 ; Safety in electroheat installations. Special requirements for resistive heating equipment
• EN 60519-2 : 2006 ; Safety in electroheat installations. Special requirements for resistive heating equipment
• EN 60519-3: 1996; Safety in electroheat installations. Special requirements for induction and conduction heating and induction melting plants
• EN 60519-3: 2005; Safety in electroheat installations. Special requirements for induction and conduction heating and induction melting plants
• EN 60519-4: 1997; Safety in electroheat installations. Special requirements for arc furnace installations
• EN 60519-4: 2006; Safety in electroheat installations. Special requirements for arc furnace installations
• EN 60519-4: 2013; Safety in electric heating installations. Special requirements for arc furnace installations
• EN 60519-6: 2011; Safety in electroheat installations. Features for safety in industrial microwave heating equipment
• EN 60519-7: 2009; Safety in electroheat installations. Special requirements for electron gun installations
• EN 60519-8 : 2005 ; Safety in electroheat installations. Special requirements for electro slag melting furnaces
• EN 60519-9: 1996; Safety in electroheat installations. Special requirements for high frequency dielectric heating installations
• EN 60519-9: 2005; Safety in electroheat installations. Special requirements for high frequency dielectric heating installations
• EN 60519-10 : 2005 ; Safety in electroheat installations. Special requirements for electrical resistance trace heating systems for industrial and commercial applications
• EN 60519-10: 2013; Safety in electric heating installations. Special requirements for electrical resistance trace heating systems for industrial and commercial applications
• EN 60519-11: 1997; Safety in electroheat installations. Special requirements for installations for electromagnetic mixing, transport or pouring of metal liquids
• EN 60519-11 : 2007 ; Safety in electroheat installations. Special requirements for installations using the effect of electromagnetic forces on liquid metals
• EN 60519-12: 2013; Safety in electric heating installations. Special requirements for infrared electric heating installations
• EN 60519-21: 1998; Safety in electroheat installations. Special requirements for resistive heating equipment. Heating and melting glass equipment
• EN 60519-21: 2009; Safety in electroheat installations. Special requirements for resistive heating equipment. Heating and melting glass equipment
• EN 60521: 1995; Class 0;5, 1 and 2 alternating current watthour meters.
• EN 60522 : 1999 ; Determination of permanent filtration of X-ray tube assemblies.
• EN 60526: 2004; High voltage cable plug and socket connections for medical X-ray equipment.
• EN 60529 : 1992+A2 : 2013 ; Degrees of protection (IP code) provided by enclosures.
• EN 60531 : 2000 ; Household electric thermal storage room heaters. Methods for measuring performance.
• EN 60534-1 : 1993 ; Industrial process control valves. Industrial process control valves. Control valve terminology and general considerations
• EN 60534-1 : 2005 ; Industrial process control valves. Control valve terminology and general considerations
• EN 60534-4: 2006; Industrial process control valves. Inspection and routine tests
• EN 60534-7 : 2010 ; Industrial process control valves. Control valve data sheet
• EN 60534-9 : 2007 ; Industrial process control valves. Test procedure for response measurements from step inputs
• EN 60534-2-1: 1999; Industrial process control valves. flow capacity. flow capacity. Sizing equations for fluid flow under established conditions
• EN 60534-2-1: 2011; Industrial process control valves. flow capacity. Sizing equations for fluid flow under established conditions
• EN 60534-2-2: 1993; Industrial process control valves. flow capacity. Sizing equations for compressible fluid flow under established conditions
• EN 60534-2-3: 1993; Industrial process control valves. flow capacity. Test procedures
• EN 60534-2-3: 1998; Industrial process control valves. flow capacity. Test procedures
• EN 60534-2-3: 2016; Industrial process control valves. flow capacity. Test procedures
• EN 60534-2-4: 2009; Industrial process control valves. flow capacity. Natural flow characteristics and range
• EN 60534-3-1 : 2000 ; Industrial process control valves. Dimensions. Face-to-face dimensions for flanged, two-way, ball-type, angled model control valves for flanged, two-way, globe, straight version and center-to-face dimensions
• EN 60534-3-3: 1998; Industrial process control valves. Dimensions. End-to-end dimensions for butt-welded, two-way, ball type, straight model control valves
• EN 60534-6-1: 1998; Industrial process control valves. Installation details for connecting positioners to control valves. Positioner mounting on linear actuators
• EN 60534-6-2: 2001; Industrial process control valves. Installation details for connecting positioners to control valves. Positioner mounting on rotary actuators
• EN 60534-8-1 : 2001 ; Industrial process control valves. Noise issues. Laboratory measurement of noise produced by aerodynamic flow through control valves
• EN 60534-8-1 : 2005 ; Industrial process control valves. Noise issues. Laboratory measurement of noise produced by aerodynamic flow through control valves
• EN 60534-8-2: 1993; Industrial process control valves. Noise issues. Laboratory measurement of noise produced by hydrodynamic flow through control valves
• EN 60534-8-2: 2011; Industrial process control valves. Noise issues. Laboratory measurement of noise produced by hydrodynamic flow through control valves
• EN 60534-8-3: 1996; Industrial process control valves. Noise issues. Control valve aerodynamic noise estimation method
• EN 60534-8-3: 2011; Industrial process control valves. Noise issues. Control valve aerodynamic noise estimation method
• EN 60534-8-4 : 1994 ; Industrial process control valves. Noise issues. Estimation of noise produced by hydrodynamic flow
• EN 60534-8-4: 2005; Industrial process control valves. Noise issues. Estimation of noise produced by hydrodynamic flow
• EN 60534-8-4 : 2015 ; Industrial process control valves. Noise issues. Estimation of noise produced by hydrodynamic flow
• EN 60539-1 : 2008 ; Directly heated negative temperature coefficient thermistors. General specification
• EN 60539-1 : 2016 ; Directly heated negative temperature coefficient thermistors. General specification
• EN 60544-1 : 1995 ; Electrical insulating materials. Determination of the effects of ionizing radiation. Radiation interaction and dosimetry
• EN 60544-1 : 2013 ; Electrical insulating materials. Determination of the effects of ionizing radiation. Radiation interaction and dosimetry
• EN 60544-2: 2012; Electrical insulating materials. Determination of the effects of ionizing radiation on insulating materials. Irradiation and test procedures

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.