EN European Norm Tests Part 62

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 12209: 2016; Building equipment. Mechanically actuated locks and locking plates. Requirements and test methods.
• EN 12210 : 2000 ; Windows and doors. Resistance to wind load. classification
• EN 12210 : 2016 ; Windows and doors. Resistance to wind load. classification
• EN 12211: 2000; Windows and doors. Resistance to wind load. Test method.
• EN 12211: 2016; Windows and doors. Resistance to wind load. Test method.
• EN 12213: 1999; Cryogenic vessels. Performance evaluation methods of thermal insulation.
• EN 12218 : 1999 ; Rail systems to support medical equipment.
• EN 12219: 2000; Doors. Climatic influences. Requirements and classification.
• EN 12220: 1998; Ventilation for buildings. Channel work. Dimensions of circular flanges for general ventilation.
• EN 12221-1 : 2000 ; Replacement units for domestic use. Security requirements
• EN 12221-1 : 2008+A1 : 2013 ; Child use and care articles. Replacement units for domestic use. Security requirements
• EN 12221-2: 2000; Replacement units for domestic use. Test methods
• EN 12221-2 : 2008+A1 : 2013 ; Child use and care articles. Replacement units for domestic use. Test methods
• EN 12222: 1997; Shoes. Standard atmospheres for conditioning and testing shoes and footwear components.
• EN 12223: 2000; Non-destructive testing. Ultrasonic examination. Specifications for calibration block No.1;
• EN 12226: 2012; Geosynthetics. General tests for evaluation after endurance testing.
• EN 12227-1: 1999; Playgrounds for domestic use. Security requirements
• EN 12227 : 2010 ; Playgrounds for domestic use. Security requirements and test methods.
• EN 12228: 2013; Surfaces for sports fields. Determination of joint strength of synthetic surfaces.
• EN 12229: 2000; Surfaces for sports fields. Procedure for the preparation of synthetic turf and textile parts.
• EN 12229 : 2007 ; Surfaces for sports fields. Procedure for preparation of synthetic turf and needle punch test pieces.
• EN 12229 : 2014 ; Surfaces for sports fields. Procedure for preparation of synthetic turf and needle punch test pieces.
• EN 12234 : 2013 ; Surfaces for sports fields. Determination of ball rolling behavior.
• EN 12235: 2013; Surfaces for sports fields. Determination of vertical ball behavior.
• EN 12240: 1997; Tap the fasteners and close. Determine the overall and effective widths of the bands and the effective width of a flap.
• EN 12241: 2000; Tap the fasteners and close. Closing method before washing and drying or dry cleaning.
• EN 12242: 2000; Tap the fasteners and close. Determination of peel strength.
• EN 12243: 2000; Tap the fasteners and close. Determination of dimensional change in washing, drying and dry cleaning.
• EN 12244-1: 1998; Direct gas-fired washing machines with a rated heat input not exceeding 20 kW. Safety
• EN 12244-2: 1998; Direct gas-fired washing machines with a rated heat input not exceeding 20 kW. Rational use of energy
• EN 12245 : 2009+A1 : 2011 ; Portable gas cylinders. Fully wound composite cylinders.
• EN 12246: 1999; Quality classification of timber used in pallets and packaging.
• EN 12248: 1999; Sawn timber used in industrial packaging. Permissible deviations and preferred dimensions.
• EN 12249 : 1999 ; Sawn timber used in pallets. Permissible deviations and guidelines for dimensions.
• EN 12252: 2000; Equipping liquefied petroleum gas (LPG) road tankers.
• EN 12252 : 2005+A1 : 2008 ; LPG equipment and accessories. Equipping LPG road tankers.
• EN 12252: 2012; LPG equipment and accessories. Equipping LPG road tankers.
• EN 12252: 2014; LPG equipment and accessories. Equipping LPG road tankers.
• EN 12254 : 1998+A2 : 2008 ; Screens for laser workplaces. Security requirements and tests.
• EN 12254 : 2010 ; Screens for laser workplaces. Security requirements and tests.
• EN 12255-5: 1999; Waste water treatment plants. Lagooning processes
• EN 12255-10: 2001; Waste water treatment plants. Security policies
• EN 12255-11: 2001; Waste water treatment plants. General data required
• EN 12255-16:2005; Waste water treatment plants. Physical (mechanical) filtration
• EN 12256: 1998; Plastic piping systems. Thermoplastic fittings. Test method for mechanical strength or flexibility of manufactured fittings.
• EN 12258-1: 1998; Aluminum and aluminum alloys. Terms and definitions. general terms
• EN 12258-1: 2012; Aluminum and aluminum alloys. Terms and definitions. general terms
• EN 12258-2: 2004; Aluminum and aluminum alloys. Terms and definitions. Chemical analysis
• EN 12258-4: 2004; Aluminum and aluminum alloys. Terms and definitions. Remnants of the aluminum industry
• EN 12259-1 : 1999 ; Fixed fire extinguishing systems. Components for sprinklers and water spray systems. sprinkler
• EN 12259-2: 1999; Fixed fire extinguishing systems. Components for sprinklers and water spray systems. Wet alarm valve groups
• EN 12259-3: 2000; Fixed fire extinguishing systems. Components for sprinklers and water spray systems. Dry alarm valve assemblies
• EN 12259-4: 2000; Fixed fire extinguishing systems. Components for sprinklers and water spray systems. Water engine alarms
• EN 12262: 1999; Rotodynamic pumps. Technical documents. Terms, delivery range, order.
• EN 12263: 1999; Refrigeration systems and heat pumps. Safety switching devices to limit pressure. Requirements and tests.
• EN 12264 : 2005 ; Health informatics. Category structures for concept systems.
• EN 12266-1: 2012; Industrial valves. Testing of metallic valves. Pressure tests, test procedures and acceptance criteria. Mandatory requirements
• EN 12266-2: 2012; Industrial valves. Testing metallic valves . Tests, test procedures and acceptance criteria. additional requirements
• EN 12268: 2014; Food processing machinery. Band saw machines. Safety and hygiene requirements.
• EN 12269-1 : 2000 ; Determination of the bond behavior between reinforcing steel and autoclaved aerated concrete by “beam test”. short term test
• EN 12269-2: 2010; Determination of the bond behavior between reinforcing steel and autoclaved aerated concrete by beam test. long-term testing
• EN 12270: 1998; Mountaineering equipment. Wedges. Security requirements and test methods.
• EN 12270: 2013; Mountaineering equipment. Wedges. Security requirements and test methods.
• EN 12274-7:2005; Slurry surface coating. Test methods. Shaking abrasion test
• EN 12274-8:2005; Slurry surface coating. Test methods. Visual assessment of defects
• EN 12275: 1998; Mountaineering equipment. connectors. Security requirements and test methods.
• EN 12275: 2013; Mountaineering equipment. connectors. Security requirements and test methods.
• EN 12276: 1999; Mountaineering equipment. Friction anchors. Security requirements and test methods.
• EN 12276: 2013; Mountaineering equipment. Friction anchors. Security requirements and test methods.
• EN 12277: 1998; Mountaineering equipment. harness Safety requirements and test methods.
• EN 12277:2007; Mountaineering equipment. harness Safety requirements and test methods.
• EN 12277: 2015; Mountaineering equipment. harness Safety requirements and test methods.
• EN 12278: 1998; Mountaineering equipment. Pulleys. Security requirements and test methods.
• EN 12278: 2007; Mountaineering equipment. Pulleys. Security requirements and test methods.
• EN 12279 : 2000 ; Gas supply systems. Installations that regulate gas pressure in service lines. functional requirements.
• EN 12280-1: 1998; Rubber or plastic coated fabrics. Accelerated aging tests. thermal aging
• EN 12285-2: 2005; Workshop made steel tanks. Horizontal cylindrical single wall and double wall tanks for aboveground storage of flammable and non-flammable water polluting liquids
• EN 12286: 1999; In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Presentation of reference measurement procedures.
• EN 12287: 1999; In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Description of reference materials.
• EN 12288: 2010; Industrial valves. Copper alloy gate valves.
• EN 12289: 2005; Advanced technical ceramics. Mechanical properties of ceramic composites at ambient temperature. Determination of in-plane cutting properties.
• EN 12290: 2005; Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of compression properties.
• EN 12293: 2000; Plastic piping systems. Thermoplastic pipes and fittings for hot and cold water. Test method for resistance to temperature cycling of mounted assemblies.
• EN 12294: 2000; Plastic piping systems. Hot and cold water systems. Test method for sealing under vacuum.
• EN 12295: 2000; Plastic piping systems. Thermoplastic pipes and related fittings for hot and cold water. Test method for resistance of joints to pressure cycling.
• EN 12296: 1998; Biotechnology. Equipment. Guidance on testing procedures for cleanability.
• EN 12297: 1998; Biotechnology. Equipment. Guidance on testing procedures for sterilizability.
• EN 12298: 1998; Biotechnology. Equipment. Guidance on testing procedures for sealing.
• EN 12299: 2009; Railway applications. Driving comfort for passengers. Quantification and consideration.
• EN 12300: 1999; Cryogenic vessels. Cleaning for cryogenic service.
• EN 12301 : 2000+A1 : 2008 ; Plastic and rubber machinery. Calendars. Security requirements.
• EN 12305: 1998; Biotechnology. Modified organisms for application in the environment. Guidelines for sampling strategies for the deliberate release of genetically modified plants.
• EN 12306: 1998; Biotechnology. Guideline for quality control of diagnostic kits used in agriculture, plant and animal pests and disease control and environmental contamination.
• EN 12307: 1998; Biotechnology. Large-scale process and production. Guidance for good practice, procedures, training and control for staff.
• EN 12308: 1998; Plants and equipment for LNG. Compliance testing of gaskets designed for flanged connections used in LNG pipes.
• EN 12309-1 : 2000 ; Gas-operated absorption and adsorption air conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW. Safety
• EN 12309-1: 2014; Gas-fired sorption devices for heating and/or cooling with a net heat input not exceeding 70 kW. Terms and definitions
• EN 12309-2: 2000; Gas-operated absorption and adsorption air conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW. Rational use of energy
• EN 12309-2: 2015; Gas-fired sorption devices for heating and/or cooling with a net heat input not exceeding 70 kW. Safety
• EN 12309-3: 2014; Gas-fired sorption devices for heating and/or cooling with a net heat input not exceeding 70 kW. Test conditions

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.