EN European Norm Tests Part 88

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 14908-3: 2014; Open Data Communication in Building Automation, Controls and Building Management. Control Network Protocol. Powerline Channel Specification
• EN 14908-4: 2006; Open data communication in building automation, controls and building management. Control network protocol. IP communication
• EN 14908-4: 2014; Open Data Communication in Building Automation, Controls and Building Management. Control Network Protocol. IP Communication
• EN 14908-5: 2009; Open data communication in building automation, controls and building management application guide. Control network protocol. application
• EN 14908-6: 2010; Open data communication in building automation, controls and building management. Control network protocol. Application elements
• EN 14908-6: 2014; Open Data Communication in Building Automation, Controls and Building Management. Control Network Protocol. Application elements
• EN 14909: 2006; Flexible sheets for waterproofing. Plastic and rubber moisture resistant courses. Definitions and properties.
• EN 14909: 2012; Flexible sheets for waterproofing. Plastic and rubber moisture resistant courses. Definitions and properties.
• EN 14910 : 2007+A1 : 2009 ; Garden equipment. Trimmers powered by a walk-behind internal combustion engine. Safety.
• EN 14912 : 2005 ; LPG equipment and accessories. Inspection and maintenance of LPG cylinder valves during periodic inspection of cylinders.
• EN 14912 : 2015 ; LPG equipment and accessories. Inspection and maintenance of LPG cylinder valves during periodic inspection of cylinders.
• EN 14913 : 2005 ; LPG equipment and accessories. Portable refillable welded steel cylinders for liquefied petroleum gas (LPG). Alternative design and construction. Control procedure before, during and after filling.
• EN 14914 : 2005 ; LPG equipment and accessories. Portable refillable welded steel cylinders for liquefied petroleum gas (LPG). Alternative design and construction. Periodic examination.
• EN 14915 : 2006 ; Solid wood paneling and veneer. Specifications, conformity assessment and marking.
• EN 14915 : 2013 ; Solid wood paneling and veneer. Specifications, conformity assessment and marking.
• EN 14916 : 2005 ; Homemade saucepan. Graphic symbols (pictograms).
• EN 14917 : 2009+A1 : 2012 ; Metal bellows expansion joints for pressure applications.
• EN 14918 : 2009 ; Solid biofuels. Determination of calorific value.
• EN 14930 : 2007+A1 : 2009 ; Agricultural and forestry machinery and garden equipment. Pedestrian controlled and handheld machines. Determination of accessibility of hot surfaces.
• EN 14931 : 2006 ; Pressure vessels for human use (PVHO). Multi-native pressure chambers for hyperbaric therapy. Performance, security requirements and testing.
• EN 14932: 2006; Plastics. Stretch thermoplastic films for wrapping bales. Requirements and test methods.
• EN 14933: 2007; Thermal insulation and lightweight fillers for civil engineering applications. Factory made products from expanded polystyrene (EPS). Specification.
• EN 14934 : 2007 ; Thermal insulation and lightweight fillers for civil engineering applications. Factory-made products from extruded polystyrene foam (XPS). Specification.
• EN 14935: 2006; Copper and copper alloys. Determination of impurities in pure copper. ETA-AAS method.
• EN 14936-1: 2006; Copper and copper alloys. Determination of aluminum content. titrimetric method
• EN 14936-2: 2006; Copper and copper alloys. Determination of aluminum content. FAAS method
• EN 14937-1: 2006; Copper and copper alloys. Determination of antimony content. spectrophotometric method
• EN 14937-2: 2006; Copper and copper alloys. Determination of antimony content. FAAS method
• EN 14938-2: 2010; Copper and copper alloys. Determination of bismuth content. Flame atomic absorption spectrometric method (FAAS)
• EN 14939 : 2006 ; Copper and copper alloys. Determination of beryllium content. FAAS Method.
• EN 14940-2: 2006; Copper and copper alloys. Determination of chromium content. FAAS method
• EN 14941: 2006; Copper and copper alloys. Determination of cobalt content. FAAS method.
• EN 14942-2: 2006; Copper and copper alloys. Determination of arsenic content. FAAS method
• EN 14943 : 2005 ; Transport services. Logistics. Glossary of Terms.
• EN 14944-1: 2006; The effect of cementitious products on water for human consumption. Test methods. Effect of cementitious products produced in the factory on organoleptic parameters
• EN 14944-3: 2007; The effect of cementitious products on water for human consumption. Test methods. Migration of substances from factory-made cementitious products
• EN 14945 : 2005 ; Refractory products and materials. Spectrometric determination of chromium (VI) before and after use in chromium-containing refractories.
• EN 14951 : 2006 ; Solid hardwood paneling and veneer. Machined profile elements.
• EN 14952 : 2005 ; Surfaces for sports fields. Determination of water absorption of unbound minerals.
• EN 14953 : 2005 ; Surfaces for sports fields. Determination of the thickness of unbound mineral surfaces for outdoor sports fields.
• EN 14954 : 2005 ; Surfaces for sports fields. Determination of hardness of natural grass and unbound mineral surfaces for outdoor sports fields.
• EN 14955 : 2005 ; Surfaces for sports fields. Determination of the composition and particle shape of unbound mineral surfaces for outdoor sports fields.
• EN 14956 : 2005 ; Surfaces for sports fields. Determination of water content of unbound mineral surfaces for outdoor sports fields.
• EN 14957 : 2006+A1 : 2010 ; Food processing machinery. Conveyor dishwashers. Safety and hygiene requirements.
• EN 14958 : 2006+A1 : 2009 ; Food processing machinery. Flour and semolina grinding and processing machines. Safety and hygiene requirements.
• EN 14959 : 2006 ; Tap the fasteners and close. Determination of resistance to wear after washing.
• EN 14960: 2006; Inflatable playground equipment. Security requirements and test methods.
• EN 14960: 2013; Inflatable playground equipment. Security requirements and test methods.
• EN 14961-1 : 2010 ; Solid biofuels. Fuel properties and classes. General Requirements
• EN 14961-2: 2011; Solid biofuels. Fuel properties and classes. Wood pellets for non-industrial use
• EN 14961-3: 2011; Solid biofuels. Fuel properties and classes. Wood briquettes for non-industrial use
• EN 14961-4: 2011; Solid biofuels. Fuel properties and classes. Chips for non-industrial use
• EN 14961-5: 2011; Solid biofuels. Fuel properties and classes. Firewood for non-industrial use
• EN 14961-6: 2012; Solid biofuels. Fuel properties and classes. Non-woody pellets for non-industrial use
• EN 14962: 2006; water quality. Guidance on the scope and selection of fish sampling methods.
• EN 14963: 2006; Roof coverings. Continuous skylights made of plastic with or without feet. Classification, requirements and test methods.
• EN 14964 : 2006 ; Rigid substrates for discontinuous roofs. Definitions and properties.
• EN 14967 : 2006 ; Flexible sheets for waterproofing. Bitumen moisture resistant courses. Definitions and properties.
• EN 14968 : 2006 ; Semantics for groundwater data exchange.
• EN 14969 : 2006 ; Railway applications. To watch. Qualification system for railway line contractors.
• EN 14970 : 2006 ; Textile. Knitting factories. Determination of loop length and yarn linear density in weft knitted fabrics.
• EN 14971 : 2006 ; Textile. Knitting factories. Determination of the number of loops per unit length and unit area.
• EN 14973 : 2006+A1 : 2008 ; Conveyor belts for use in underground installations. Electrical and flammability safety requirements.
• EN 14973: 2015; Conveyor belts for use in underground installations. Electrical and flammability safety requirements.
• EN 14974 : 2006+A1 : 2010 ; Facilities for users of wheeled sports equipment. Security requirements and test methods.
• EN 14975 : 2006+A1 : 2010 ; Roof ladders. Requirements, marking and testing.
• EN 14976 : 2005 ; Textile. Bed upholstery. Specification and test methods.
• EN 14977 : 2006 ; Copper and copper alloys. Determination of tensile stress. 5% ammonia test.
• EN 14978 : 2006 ; Laminate floor coverings. Acrylic-based surface-layered, electron-beam cured elements. Specifications, requirements and test methods.
• EN 14978 : 2016 ; Laminate floor coverings. Acrylic-based surface-layered, electron-beam cured elements. Specifications, requirements and test methods.
• EN 14979 : 2006 ; Packaging. Flexible plastic/metal laminate pipes. Dimensions and tolerances of the nozzle S 13 ;
• EN 14981 : 2006 ; Surfactants. Determination of high boiling point solvent content in liquid detergents by GLC.
• EN 14982 : 2006+A1 : 2010 ; Plastic pipe and duct systems. Thermoplastic shafts or risers for inspection rooms and manholes. Determination of ring stiffness.
• EN 14983: 2007; Explosion prevention and protection in underground mines. Equipment and protective systems for Fireamp drainage.
• EN 14984 : 2006 ; Lime materials. Determination of product effect on soil pH. Soil incubation method.
• EN 14984 : 2016 ; Lime materials. Determination of product effect on soil pH. Soil incubation method.
• EN 14986 : 2007 ; Design of fans operating in potentially explosive atmospheres.
• EN 14987 : 2006 ; Plastics. Evaluation of disposable in wastewater treatment plants. Test chart for final acceptance and specifications.
• EN 14988-1 : 2006+A1 : 2012 ; Children's highchairs. Security requirements
• EN 14988-2 : 2006+A1 : 2012 ; Children's highchairs. Test methods
• EN 14989-1 : 2007 ; chimneys. Requirements and test methods for metal chimneys and material-independent air supply ducts for room-tight heating applications. Vertical air/flue terminals for C6 type devices
• EN 14989-2: 2007; chimneys. Requirements and test methods for metal chimneys and material-independent air supply ducts for room-tight heating applications. Chimney and air supply ducts for room-tight devices
• EN 14991: 2007; Precast concrete products. Basic items.
• EN 14992 : 2007+A1 : 2012 ; Precast concrete products. Wall elements.
• EN 14995 : 2006 ; Plastics. Evaluation of compostability. Test scheme and features.
• EN 14996 : 2006 ; water quality. Guidance on ensuring the quality of biological and ecological assessments in the aquatic environment.
• EN 14997 : 2015 ; Characterization of waste. Penetration behavior test. Effect of pH on leaching with continuous pH control.
• EN 14998 : 2005 ; Derivatives from coal pyrolysis. Coal tar based oils: fluxing oils. Specifications and test methods.
• EN 15000: 2008; Safety of industrial trucks. Self-propelled variable-access trucks. Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters.
• EN 15001-1: 2009; Gas infrastructure. Gas installation piping with operating pressure higher than 0,5 bar for industrial installations and 5 bar for industrial and non-industrial installations. Detailed functional requirements for design, material, construction, inspection and testing
• EN 15001-2 : 2008 ; Gas infrastructure. Gas installation piping with operating pressure higher than 0,5 bar for industrial installations and 5 bar for industrial and non-industrial installations. Detailed functional requirements for commissioning, operation and maintenance
• EN 15002: 2006; Characterization of waste. Preparation of test sections from laboratory sample.
• EN 15002: 2015; Characterization of waste. Preparation of test sections from laboratory sample.
• EN 15004-1 : 2008 ; Fixed fire extinguishing systems. Gas extinguishing systems. Design, installation and maintenance
• EN 15004-2: 2008; Fixed fire extinguishing systems. Gas extinguishing systems. Physical properties and system design of gas extinguishing systems for FK-5-1-12 extinguisher
• EN 15004-3 : 2008 ; Fixed fire extinguishing systems. Gas extinguishing systems. Physical properties and system design of gaseous extinguishing systems for HCFC Mixture A extinguisher
• EN 15004-4 : 2008 ; Fixed fire extinguishing systems. Gas extinguishing systems. Physical properties and system design of gas extinguishing systems for HFC 125 extinguisher
• EN 15004-5 : 2008 ; Fixed fire extinguishing systems. Gas extinguishing systems. Physical properties and system design of gaseous extinguishing systems for HFC 227ea extinguisher
• EN 15004-6 : 2008 ; Fixed fire extinguishing systems. Gas extinguishing systems. Physical properties and system design of gas extinguishing systems for HFC 23 extinguisher
• EN 15004-7 : 2008 ; Fixed fire extinguishing systems. Gas extinguishing systems. Physical properties and system design of gas extinguishing systems for IG-01 extinguisher

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.