EN European Norm Tests Part 117

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 60034-1 : 1995 ; Rotary electric machines. Rating and performance
• EN 60034-1 : 1998 ; Rotary electric machines. Rating and performance
• EN 60034-1 : 2004 ; Rotary electric machines. Rating and performance
• EN 60034-1 : 2010 ; Rotary electric machines. Rating and performance
• EN 60034-2 : 1999 ; Rotary electric machines. Methods for determining losses and efficiency of electrical machines returning from tests (excluding machines for traction vehicles)
• EN 60034-3: 1996; Rotary electric machines. Special requirements for turbine type synchronous machines
• EN 60034-3: 2005; Rotary electric machines. Special requirements for cylindrical rotor synchronous machines
• EN 60034-3 : 2008 ; Rotary electric machines. Special requirements for synchronous generators driven by steam turbines or combustion gas turbines
• EN 60034-4: 1995; Rotary electric machines. Methods for determining synchronous machine quantities from tests
• EN 60034-4: 2008; Rotary electric machines. Methods for determining synchronous machine quantities from tests
• EN 60034-6 : 1994 ; Rotary electric machines.. Cooling Methods (IC Code)
• EN 60034-7: 1993; Rotary electric machines. Classification of building types and assembly regulations (IM Code)
• EN 60034-8 : 2007+A1 : 2014 ; Rotary electric machines. Terminal markings and direction of rotation
• EN 60034-9 : 1994 ; Rotary electric machines. Noise limits
• EN 60034-9 : 1998 ; Rotary electric machines. Noise limits
• EN 60034-9 : 2005 ; Rotary electric machines. Noise limits
• EN 60034-11: 2004; Rotary electric machines. thermal protection
• EN 60034-12: 1996; Rotary electric machines. Starting performance of single-speed three-phase cage induction motors for voltages up to and including 690 V, 50 Hz
• EN 60034-14: 1998; Rotary electric machines. Mechanical vibration of some machines with shaft heights of 56 mm and higher. Measurement, evaluation and limits of vibration
• EN 60034-15 : 1996 ; Rotary electric machines. Impulse voltage withstand levels of rotating ac machines with form-wound stator coils
• EN 60034-15 : 2009 ; Rotary electric machines. Impulse voltage withstand levels of form-wound stator coils for rotating ac machines
• EN 60034-19: 2014; Rotary electric machines. Specific test methods for DC machines on conventional and rectifier fed consumables
• EN 60034-22: 1998; Rotary electric machines. AC generators for reciprocating internal combustion (RIC) engine driven generator sets
• EN 60034-26: 2006; Rotary electric machines. Effects of unbalanced voltages on the performance of three-phase cage induction motors
• EN 60034-28 : 2007 ; Rotary electric machines. Test methods to quantify equivalent circuit diagrams for three-phase low-voltage cage asynchronous motors
• EN 60034-28 : 2013 ; Rotary electric machines. Test methods to quantify equivalent circuit diagrams for three-phase low-voltage cage asynchronous motors
• EN 60034-29: 2008; Rotary electric machines. Equivalent loading and superposition techniques. Indirect test to determine temperature rise
• EN 60034-30: 2009; Rotary electric machines. Efficiency classes of single-speed, three-phase, cage asynchronous motors (IE code)
• EN 60034-16-1: 1996; Rotary electric machines. Excitation systems for synchronous machines. Definitions
• EN 60034-16-1: 2011; Rotary electric machines. Excitation systems for synchronous machines. Definitions
• EN 60034-18-1 : 1994 ; Rotary electric machines. Functional evaluation of insulation systems. general rules
• EN 60034-18-1 : 2010 ; Rotary electric machines. Functional evaluation of insulation systems. general rules
• EN 60034-30-1: 2014; Rotary electric machines. Efficiency classes of line-operated AC motors (IE code)
• EN 60034-2-1: 2007; Rotary electric machines. Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
• EN 60034-2-1: 2014; Rotary electric machines. Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
• EN 60034-2-2: 2010; Rotary electric machines. Special methods for determining the individual losses of large machines from tests. Appendix to IEC 60034-2-1
• EN 60034-27-3: 2016; Rotary electric machines. Measurement of dielectric loss factor in stator winding insulation of rotating electrical machines
• EN 60034-18-21 : 1994 ; Rotary electric machines. Functional evaluation of insulation systems. Test procedures for wire wound coils. Thermal evaluation and classification.
• EN 60034-18-21: 2013; Rotary electric machines. Functional evaluation of insulation systems. Test procedures for wire wound coils. Thermal evaluation and classification
• EN 60034-18-22: 2001; Rotary electric machines. Functional evaluation of insulation systems. Test procedures for wire wound coils. Classification of modifications and insulation component substitutions
• EN 60034-18-31 : 1994 ; Rotary electric machines. Functional evaluation of insulation systems. Test procedures for form-wound wraps. Thermal evaluation and classification of insulation systems used in machines, including 50 MVA and 15 KV
• EN 60034-18-31 : 2012 ; Rotary electric machines. Functional evaluation of insulation systems. Test procedures for form-wound wraps. Thermal evaluation and classification of insulation systems used in rotating machines
• EN 60034-18-32: 2010; Rotary electric machines. Functional evaluation of insulation systems. Test procedures for form-wound wraps. Evaluation by electrical endurance
• EN 60034-18-34 : 2012 ; Rotary electric machines. Functional evaluation of insulation systems. Test procedures for form-wound wraps. Evaluation of the thermomechanical durability of insulation systems
• EN 60034-18-41: 2014; Rotary electric machines. Non-partial discharge electrical insulation systems (Type I) used in rotating electrical machines powered by voltage converters. Proficiency and quality control tests
• EN 60041: 1995; Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump turbines.
• EN 60044-1 : 1999 ; Instrument transformers. current transformers
• EN 60044-2: 1999; Instrument transformers. Inductive voltage transformers
• EN 60044-6: 1999; Instrument transformers. Requirements for protective current transformers for transient performance
• EN 60044-7 : 2000 ; Instrument transformers. Electronic voltage transformers
• EN 60045-1: 1993; Steam turbine buying guide. Steam turbine buying guide
• EN 60051-1 : 1999 ; Direct-acting analog electrical measuring instruments and accessories. Definitions and general requirements common to all parts
• EN 60060-1 : 2010 ; High voltage testing techniques. General definitions and test requirements
• EN 60060-2: 1995; High voltage testing techniques. measuring systems
• EN 60060-2: 2011; High voltage testing techniques. measuring systems
• EN 60060-3: 2006; High voltage testing techniques. Definitions and requirements for on-site testing
• EN 60061-1: 1993; Features for lamp covers and holders, along with indicators for interchangeability and safety checking. lamp covers
• EN 60061-1 : 1993+A53 : 2015 ; Lamp covers and holders with indicators for interchangeability and safety checking. lamp covers
• EN 60061-2: 1993; Features for lamp covers and holders, along with indicators for interchangeability and safety checking. sockets
• EN 60061-2 : 1993+A50 : 2015 ; Lamp covers and holders with indicators for interchangeability and safety checking. sockets
• EN 60061-3: 1993; Features for lamp covers and holders, along with indicators for interchangeability and safety checking. indicators
• EN 60061-3 : 1993+A51 : 2015 ; Lamp covers and holders with indicators for interchangeability and safety checking. indicators
• EN 60061-4 : 1992+A14 : 2011 ; Lamp covers and holders with indicators for interchangeability and safety checking. Guidelines and general information
• EN 60062 : 1994 ; Marking codes for resistors and capacitors.
• EN 60062 : 2005 ; Marking codes for resistors and capacitors.
• EN 60062 : 2016 ; Marking codes for resistors and capacitors.
• EN 60063: 2015; The preferred series of numbers for resistors and capacitors.
• EN 60064 : 1995+A5 : 2009 ; Tungsten filament lamps for household and similar general lighting purposes. Performance requirements.
• EN 60065: 1994; Safety requirements for electrically powered electronics and related devices for household and similar general use.
• EN 60065: 1998; Audio, video and similar electronic devices. Security requirements.
• EN 60065: 2014; Audio, video and similar electronic devices. Security requirements.
• EN 60068-1 : 1995 ; Environmental test. General and guidance
• EN 60068-1 : 2014 ; Environmental test. General and guidance
• EN 60068-4: 1996; Environmental test. Information for specification authors. Test summaries
• EN 60068-2-1: 1993; Environmental test. Test methods. Tests A. Cold
• EN 60068-2-1 : 2007 ; Environmental test. tests. Test A. Cold
• EN 60068-2-2 : 1993 ; Environmental test. Test methods. Tests B. Dry heat
• EN 60068-2-2 : 2007 ; Environmental test. tests. Test B. Dry heat
• EN 60068-2-5 : 2000 ; Environmental test. Test methods. Test No. Simulated solar radiation at ground level
• EN 60068-2-5: 2011; Environmental test. tests. Test No. Guidance for simulated solar radiation and solar radiation testing at ground level
• EN 60068-2-6: 1996; Environmental test. Test methods. Test the fc. Vibration (sinusoidal)
• EN 60068-2-6 : 2008 ; Environmental test. tests. Test the fc. Vibration (sinusoidal)
• EN 60068-2-7 : 1993 ; Environmental test. Test methods. Test ga and routing. acceleration, steady state
• EN 60068-2-9 : 2000 ; Environmental test. Test methods. tests. Guide to solar radiation testing
• EN 60068-2-10 : 2005 ; Environmental test. tests. Test J and guidance : Mold growth
• EN 60068-2-11 : 1999 ; Environmental test. Test methods. tests. Test the KA. salt fog
• EN 60068-2-13 : 1999 ; Environmental test. Test methods. tests. Test M. Low air pressure
• EN 60068-2-14 : 2000 ; Environmental test. Test methods. N test. temperature change
• EN 60068-2-14 : 2009 ; Environmental test. tests. N test. temperature change
• EN 60068-2-17 : 1995 ; Environmental test. Test methods. Test Q. Sealing
• EN 60068-2-18 : 2001 ; Environmental test. Test methods. R and guidance tests. Guilty
• EN 60068-2-20 : 2008 ; Environmental test. tests. Test T. Test methods for solderability of tipped devices and resistance to soldering heat
• EN 60068-2-21: 1997; Environmental test. Test methods. Test U. Robustness of terminations and integrated mounting devices
• EN 60068-2-21: 1999; Environmental test. Test methods. Test U. Robustness of terminations and integrated mounting devices
• EN 60068-2-21 : 2006 ; Environmental test. tests. Test U : Stability of terminations and integrated mounting devices
• EN 60068-2-27 : 1993 ; Environmental test. Test methods. Environmental testing procedures. tests. Take EA and guidance test. Shock
• EN 60068-2-27 : 2009 ; Environmental test. tests. Take EA and guidance test. Shock
• EN 60068-2-29 : 1993 ; Environmental test. Test methods. Environmental testing procedures. tests. Take the eb and guidance test. Bump
• EN 60068-3-1 : 1999 ; Environmental test. Guidance. Cold and dry heat tests
• EN 60068-3-1: 2011; Environmental test. Supporting documentation and guidance. Cold and dry heat tests

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.