EN European Norm Tests Part 34

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 1976 : 1998 ; Copper and copper alloys. Bulk unprocessed copper products.
• EN 1976 : 2012 ; Copper and copper alloys. Bulk unprocessed copper products.
• EN 1977 : 1998 ; Copper and copper alloys. Copper drawing stock (wire rod).
• EN 1977 : 2013 ; Copper and copper alloys. Copper drawing stock (wire rod).
• EN 1979 : 1999 ; Plastic pipe and duct systems. Pipes with thermoplastic spiral-shaped structural walls. Determination of the tensile strength of a seam.
• EN 1982 : 1999 ; Copper and copper alloys. Ingots and castings.
• EN 1982 : 2008 ; Copper and copper alloys. Ingots and castings.
• EN 1985 : 1999 ; Walking Aids. General requirements and test methods.
• EN 1986-1: 1997; Electric road vehicles. Measurement of energy performances. pure electric vehicles
• EN 1987-1: 1997; Electric road vehicles. Special requirements for security. Energy storage on board
• EN 1987-2: 1997; Electric road vehicles. Special requirements for security. Functional safety tools and protection against malfunctions
• EN 1987-3: 1998; Electric road vehicles. Special requirements for security. Protecting users against electrical hazards
• EN 1988-1: 1998; Foodstuffs. Sulphite determination. Optimized Monier-Williams method
• EN 1988-2: 1998; Foodstuffs. Sulphite determination. enzymatic method
• EN 1989 : 2000 ; Thermoplastic piping systems. Joints for buried non-pressurized sewer applications. Test method for long-term sealing performance of thermoplastic elastomer (TPE) gasketed joints by estimating the sealing pressure.
• EN 1991-3: 2006; Eurocode 1 ; Actions on structures. Actions triggered by cranes and machinery
• EN 1991-4: 2006; Eurocode 1 ; Actions on structures. Silos and tanks
• EN 1991-1-4 : 2005+A1 : 2010 ; Eurocode 1 ; Actions on structures. General actions
• EN 1991-1-6: 2005; Eurocode 1 ; Actions on structures. General actions. Actions during execution
• EN 1991-1-7 : 2006+A1 : 2014 ; Eurocode 1 ; Actions on structures. General actions
• EN 1992-2: 2005; Eurocode 2 ; Design of concrete structures. Concrete bridges. Design and detailing rules
• EN 1992-3: 2006; Eurocode 2 ; Design of concrete structures. Fluid retaining and containing structures
• EN 1992-1-1 : 2004+A1 : 2014 ; Eurocode 2: Design of concrete structures. General rules and rules for buildings
• EN 1992-1-2: 2004; Eurocode 2 ; Design of concrete structures. general rules
• EN 1993-2: 2006; Eurocode 3 ; Design of steel structures. steel bridges
• EN 1993-5: 2007; Eurocode 3 ; Design of steel structures. stake
• EN 1993-6: 2007; Eurocode 3 ; Design of steel structures. crane support structures
• EN 1993-1-1 : 2005+A1 : 2014 ; Eurocode 3 ; Design of steel structures. General rules and rules for buildings
• EN 1993-1-2: 2005; Eurocode 3 ; Design of steel structures. general rules
• EN 1993-1-3: 2006; Eurocode 3 ; Design of steel structures. general rules
• EN 1993-1-4 : 2006+A1 : 2015 ; Eurocode 3 ; Design of steel structures. General rules. Supplementary rules for stainless steels
• EN 1993-1-5: 2006; Eurocode 3 ; Design of steel structures. cladding structural elements
• EN 1993-1-6:2007; Eurocode 3 ; Design of steel structures. Strength and Stability of Shell Structures
• EN 1993-1-7:2007; Eurocode 3 ; Design of steel structures. Clad structures subjected to out-of-plane loading
• EN 1993-1-8:2005; Eurocode 3 ; Design of steel structures. Design of joints
• EN 1993-1-9:2005; Eurocode 3 ; Design of steel structures. burnout
• EN 1993-1-10:2005; Eurocode 3 ; Design of steel structures. Material toughness and properties throughout the thickness
• EN 1993-1-11: 2006; Eurocode 3 ; Design of steel structures. Design of structures with tension components
• EN 1993-1-12:2007; Eurocode 3 ; Design of steel structures. Additional rules for the extension of EN 1993 to steel grades S 700
• EN 1993-3-1: 2006; Eurocode 3 ; Design of steel structures. Towers, pillars and chimneys
• EN 1993-3-2: 2006; Eurocode 3 ; Design of steel structures. Towers, pillars and chimneys
• EN 1993-4-1:2007; Eurocode 3 ; Design of steel structures. silos
• EN 1993-4-2:2007; Eurocode 3 ; Design of steel structures. tanks
• EN 1993-4-3:2007; Eurocode 3 ; Design of steel structures. pipelines
• EN 1994-2: 2005; Eurocode 4 ; Design of composite steel and concrete structures. General rules and guidelines for bridges
• EN 1994-1-1:2004; Eurocode 4 ; Design of composite steel and concrete structures. General rules and rules for buildings
• EN 1994-1-2 : 2005+A1 : 2014 ; Eurocode 4 ; Design of composite steel and concrete structures. General rules. Structural fire design
• EN 1996-2: 2006; Eurocode 6 ; Design of masonry structures. Design issues, material selection and masonry application
• EN 1996-3: 2006; Eurocode 6 ; Design of masonry structures. Simplified calculation methods for unreinforced masonry structures
• EN 1996-1-1 : 2005+A1 : 2012 ; Eurocode 6 ; Design of masonry structures. General rules for reinforced and unreinforced masonry structures
• EN 1996-1-2: 2005; Eurocode 6 ; Design of masonry structures. General rules. Structural fire design
• EN 1997-1 : 2004+A1 : 2013 ; Eurocode 7 ; Geotechnical design. general rules
• EN 1997-2: 2007; Eurocode 7 ; Geotechnical design. Ground survey and testing
• EN 1998-1 : 2004+A1 : 2013 ; Eurocode 8 : Design of earthquake resistant structures . General rules, seismic actions and rules for buildings
• EN 1998-2 : 2005+A2 : 2011 ; Eurocode 8 ; Design of earthquake resistant structures. bridges
• EN 1998-3: 2005; Eurocode 8 ; Design of earthquake resistant structures. Evaluation and retrofitting of buildings
• EN 1998-4: 2006; Eurocode 8 ; Design of earthquake resistant structures. Silos, tanks and pipelines
• EN 1998-5: 2004; Eurocode 8 ; Design of earthquake resistant structures. Foundations, retaining structures and geotechnical considerations
• EN 1998-6:2005; Eurocode 8 ; Design of earthquake resistant structures. Towers, pillars and chimneys
• EN 1999-1-1 : 2007+A2 : 2013 ; Eurocode 9 : Design of aluminum structures. General structural rules
• EN 1999-1-2: 2007; Eurocode 9 ; Design of aluminum structures. Structural fire design
• EN 1999-1-3 : 2007+A1 : 2011 ; Eurocode 9 ; Design of aluminum structures. structures susceptible to fatigue
• EN 1999-1-4 : 2007+A1 : 2011 ; Eurocode 9 ; Design of aluminum structures. cold formed structural cladding
• EN 1999-1-5:2007; Eurocode 9 ; Design of aluminum structures. shell structures
• EN 2000 : 1992 ; Quality assurance. EN aviation products. Approval of the manufacturers' quality system.
• EN 2002-1: 2005; Aviation series. Metallic materials. Test methods. Tensile test at ambient temperature
• EN 2002-2: 2005; Aviation series. Metallic materials. Test methods. High temperature tensile test
• EN 2002-005 : 2007 ; Aviation series. Test methods for metallic materials. Continuous creep and stress-rupture testing
• EN 2003-009:2007; Aviation series. Test methods. Titanium and titanium alloys. Determination of surface contamination
• EN 2003-010: 2007; Aviation series. Titanium and titanium alloys. Test methods. Sampling for determination of hydrogen content
• EN 2004-1: 1993; Test methods for aluminum and aluminum alloy products. Determination of electrical conductivity of wrought aluminum alloys
• EN 2004-5: 1993; Test methods for aluminum and aluminum alloy products. Determination of coating thickness and copper diffusion of coated semi-finished products
• EN 2009 : 1992 ; bearings. Rigid, single row ball bearings with housing rolling in series 8 and 9 with steel diameter; Dimensions and loads.
• EN 2011: 1989; Specifications for bearings. Rigid single row ball bearings with housing rolling in corrosion resistant steel diameter series 8 and 9; Dimensions and loads.
• EN 2012 : 1989 ; Specifications for bearings – rigid, single row ball bearings with housing rolling in steel diameter series 0 and 2; Dimensions and loads.
• EN 2014: 1989; Specifications for bearings. Rigid single row ball bearings with housing rolling in corrosion resistant steel diameter series 0 and 2; Dimensions and loads.
• EN 2015 : 1989 ; Specifications for bearings – double row, steel diameter self-aligning ball bearings in series 2 with housing rolling; Dimensions and loads.
• TR 2017 : 1989 ; Specifications for the bearings – double row self-aligning ball bearings with housing rolling in corrosion resistant steel diameter series 2; Dimensions and loads.
• EN 2018 : 1989 ; Specifications for bearings – single row, spherical roller bearings in steel diameter series 3 and 4 with housing rolling; Dimensions and loads.
• EN 2020 : 1989 ; Specifications for bearings – single row spherical roller bearings with housing rolling made of corrosion resistant steel diameter series 3 and 4; Dimensions and loads.
• EN 2022 : 1990 ; Specifications for bearings, spherical plain of corrosion-resistant steel with self-lubricating lining. Light series. Dimensions and loads.
• EN 2023: 1989; Specifications for bearings – spherical plain in corrosion-resistant steel with self-lubricating lining. regular series. Dimensions and loads.
• EN 2030: 2013; Aviation series. Steel X105CrMo17 (1;3544). Hardened and tempered. bars. 3L 150mm.
• EN 2032-001: 2014; Aviation series. Metallic materials. traditional designation
• EN 2032-2: 1994; Metallic materials. Coding of the metallurgical state in the delivery state
• EN 2043: 2013; Aviation series. Metallic materials. General requirements for semi-finished product qualification (except forging and casting).
• EN 2063: 1992; Casing bearings. Technical specification.
• EN 2064 : 1992 ; Bearings spherical plain of corrosion-resistant steel with self-lubricating lining. Technical specification.
• EN 2067: 1996; The rod ends with self-aligning ball bearings. Technical specification.
• EN 2068: 1996; Self-lubricating spherical bearing rod ends. Technical specification.
• EN 2070-4: 1991; Specification for aluminum and aluminum alloy forged products. Technical specification. tube for structures
• EN 2070-5: 1991; Specification for aluminum and aluminum alloy forged products. Technical specification. tube used under pressure
• EN 2070-6: 1991; Specification for aluminum and aluminum alloy forged products. Technical specification. rivet wire
• EN 2070-7: 1991; Specification for aluminum and aluminum alloy forged products. Technical specification. tattoo stock
• EN 2072: 1994; Aluminum alloy AL-P1050A-H14 ; Sheet and strip 0,4 mm 3L and 3L 6 mm.
• EN 2072 : 2005 ; Aviation series. Aluminum AL-P1050A. H14; Sheet and strip. 0,4mm 3L and 3L 6mm.
• EN 2076-1: 1991; Aluminum and magnesium alloy ingots and castings. Technical specification. General Requirements
• EN 2076-2: 1991; Aluminum and magnesium alloy ingots and castings. Technical specification. Ingots for remelting
• EN 2076-3: 1991; Aluminum and magnesium alloy ingots and castings. Technical specification. Pre-production and production castings
• EN 2078 : 1993 ; Metallic materials. Production schedule. Inspection schedule. Inspection and test report. Description and rules of use.

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.