EN European Norm Tests Part 28

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 1538: 2000; Execution of special geotechnical works. diaphragm walls.
• EN 1538 : 2010+A1 : 2015 ; Execution of special geotechnical works. diaphragm walls.
• EN 1539: 2000; Dryers and ovens where combustible materials are released. Security requirements.
• EN 1539 : 2009 ; Dryers and ovens where combustible materials are released Safety requirements.
• EN 1539: 2015; Dryers and ovens where combustible materials are released. Security requirements.
• EN 1541: 1997; Paper and cardboard intended for contact with foodstuffs. Determination of formaldehyde in an aqueous extract.
• EN 1541: 1998; Paper and cardboard intended for contact with foodstuffs. Determination of formaldehyde in an aqueous extract.
• EN 1542 : 1999 ; Products and systems for the protection and repair of concrete structures. Test methods. Measuring bond strength by tensile.
• EN 1543: 1998; Products and systems for the protection and repair of concrete structures. Test methods. Determination of tensile strength development for polymers.
• EN 1544 : 2006 ; Products and systems for the protection and repair of concrete structures. Test methods. Determination of creep under continuous tensile load for synthetic resin products (PC) for anchoring reinforcing bars.
• EN 1545-1: 2005; ID card systems. Surface handling applications. Basic data types, generic code lists, and general data items
• EN 1545-1 : 2015 ; ID card systems. Surface handling applications. Basic data types, generic code lists, and general data items
• EN 1545-2: 2005; ID card systems. Surface handling applications. Data items and code lists related to transport and travel payments
• EN 1545-2: 2015; ID card systems. Surface handling applications. Data items and code lists related to transport and travel payments
• EN 1546-1 : 1999 ; ID card systems. Cross-industry electronic bag. Definitions, concepts and structures
• EN 1546-2: 2000; ID card systems. Cross-industry electronic bag. Security architecture
• EN 1546-3: 2000; ID card systems. Cross-industry electronic bag. Data items and exchanges
• EN 1546-4: 1999; ID card systems. Cross-industry electronic bag. data objects
• EN 1547 : 2001+A1 : 2009 ; Industrial heat treatment equipment. Noise test code for industrial heat treatment equipment, including auxiliary handling equipment.
• EN 1548 : 2007 ; Flexible sheets for waterproofing. Plastic and rubber sheets for roof waterproofing. Bitumen exposure method.
• EN 1550 : 1997+A1 : 2008 ; Machine tool safety. Safety requirements for the design and construction of work holding chucks.
• EN 1551: 2000; Safety of industrial trucks. Self-propelled trucks over 10 000 kg.
• EN 1553: 2000; Agricultural machinery. Agricultural self-propelled mounted, semi-mounted and trailed machines. Common security requirements.
• EN 1555-1 : 2010 ; Plastic piping systems for the supply of gaseous fuels. Polyethylene (PE). general
• EN 1555-2: 2010; Plastic piping systems for the supply of gaseous fuels. Polyethylene (PE). piping
• EN 1555-3 : 2010+A1 : 2012 ; Plastic piping systems for the supply of gaseous fuels. Polyethylene (PE). Fittings
• EN 1555-4: 2011; Plastic piping systems for the supply of gaseous fuels. Polyethylene (PE). valves
• EN 1555-5 : 2010 ; Plastic piping systems for the supply of gaseous fuels. Polyethylene (PE). Suitability of the system for its purpose
• EN 1557: 1997; Surfactants. Colorimetric characterization of optically clear colored liquids (products) in conduction as $iX, $iY, $iZ tristimulus values.
• EN 1559-1: 1997; founder. Technical delivery conditions. general
• EN 1559-1: 2011; founder. Technical delivery conditions. general
• EN 1559-2: 2000; founder. Technical delivery conditions. Additional requirements for steel castings
• EN 1559-2: 2014; founder. Technical delivery conditions. Additional requirements for steel castings
• EN 1559-3: 1997; founder. Technical delivery conditions. Additional requirements for iron castings
• EN 1559-3: 2011; founder. Technical delivery conditions. Additional requirements for iron castings
• EN 1559-4: 1999; founder. Technical delivery conditions. Additional requirements for aluminum alloy castings
• EN 1559-4: 2015; founder. Technical delivery conditions. Additional requirements for aluminum alloy castings
• EN 1559-5: 1998; founder. Technical delivery conditions. Additional requirements for magnesium alloy castings
• EN 1559-6: 1999; founder. Technical delivery conditions. Additional requirements for zinc alloy castings
• EN 1560: 1997; founder. Designation system for cast iron. Material symbols and material numbers.
• EN 1560: 2011; founder. Designation system for cast iron. Material symbols and material numbers.
• EN 1564: 2011; founder. Ausferritic spheroidal graphite cast irons.
• EN 1565-1: 2000; Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene copolymer blends (SAN + PVC). Specifications for pipes, fittings and system
• EN 1566-1 : 2000 ; Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C). Specifications for pipes, fittings and system
• EN 1567 : 1999 ; Building valves. Water pressure reducing valves and combined water reducing valves. Requirements and tests.
• EN 1568-1 : 2000 ; firefighting environment. Foam concentrates. Properties of medium expansion foam concentrates for surface application to immiscible liquids
• EN 1568-1 : 2008 ; firefighting environment. Foam concentrates. Properties of medium expansion foam concentrates for surface application to immiscible liquids
• EN 1568-2: 2000; firefighting environment. Foam concentrates. Properties of high expansion foam concentrates for surface application to immiscible liquids
• EN 1568-2: 2008; firefighting environment. Foam concentrates. Properties of high expansion foam concentrates for surface application to immiscible liquids
• EN 1568-3: 2000; firefighting environment. Foam concentrates. Characteristics of low expansion foam concentrates for surface application to immiscible liquids
• EN 1568-3: 2008; firefighting environment. Foam concentrates. Characteristics of low expansion foam concentrates for surface application to immiscible liquids
• EN 1568-4: 2000; firefighting environment. Foam concentrates. Characteristics of low expansion foam concentrates for surface application to water-miscible liquids
• EN 1568-4: 2008; firefighting environment. Foam concentrates. Characteristics of low expansion foam concentrates for surface application to water-miscible liquids
• EN 1569: 1999; Surfaces for sports fields. Determination of behavior under rolling load.
• EN 1570-1 : 2011+A1 : 2014 ; Safety requirements for lift tables. Lift tables serving two fixed landings
• EN 1570-2: 2016; Safety requirements for lift tables. Lift tables serving more than 0,15 fixed scaffoldings of a building for lifting loads whose vertical travel speed does not exceed 2 m/s
• EN 1570 : 1998+A2 : 2009 ; Safety requirements for lift tables.
• EN 1572: 1997; Barcoding. Unique identifier for transport units.
• EN 1573: 1997; Barcoding. Multi-sector transport label.
• EN 1574: 1996; EDI. Message. Bayplan/stacking plan full and empty places (BAPLIE).
• EN 1575 : 1996 ; EDI. Message. Bypass/stacking plan total number message (BAPLTE).
• EN 1578: 1996; EDI. Message. Customs declaration message (CUSDEC).
• EN 1580: 1996; EDI. Message. Routing and consolidation summary message (IFCSUM).
• EN 1581: 1996; EDI. Message. Arrival notification message (IFTMAN).
• EN 1582: 1996; EDI. Message. Reservation confirmation message (IFTMBC).
• EN 1583: 1996; EDI. Message. Company reservation message (IFTMBF).
• EN 1584: 1996; EDI. Message. Temporary reservation message (IFTMBP).
• EN 1585: 1996; EDI. Message. Instruction contract status message (IFTMCS).
• EN 1586: 1996; EDI. Message. Message instruction (IFTMIN).
• EN 1587: 1996; EDI. Message. Payroll deductions advisory message (PAYDUC).
• EN 1590: 1996; EDI. Message. Remittance advisory message (REMADV).
• EN 1591-1 : 2013 ; Flanges and joints. Design guidelines for gasketed circular flange connections. Calculation
• EN 1591-2: 2008; Flanges and joints. Design guidelines for gasketed circular flange connections. Gasket parameters
• EN 1591-4: 2013; Flanges and joints. Qualification of personnel qualification in the assembly of bolted connections of critical service pressure systems
• EN 1592-1: 1998; Aluminum and aluminum alloys. HF seam welded pipes. Technical conditions for inspection and delivery
• EN 1592-2: 1998; Aluminum and aluminum alloys. HF seam welded pipes. Mechanical properties
• EN 1592-3: 1998; Aluminum and aluminum alloys. HF seam welded pipes. Dimension and form tolerances for circular pipes
• EN 1592-4: 1998; Aluminum and aluminum alloys. HF seam welded pipes. Dimension and form tolerances for square, rectangular and shaped pipes
• EN 1593 : 1999 ; Non-destructive testing. Leak test. Bubble emission techniques.
• EN 1594: 2000; Gas supply systems. Pipelines for a maximum working pressure of over 16 bar. functional requirements.
• EN 1594: 2009; Gas supply systems. Pipelines for a maximum working pressure of over 16 bar. functional requirements.
• EN 1594 : 2013 ; Gas infrastructure. Pipelines for a maximum working pressure of over 16 bar. functional requirements.
• EN 1596: 1998; Specification for special liquefied petroleum gas devices. Mobile and portable outdoor forced convection direct-fired air heaters.
• EN 1597-1 : 1997 ; Welding consumables. Test methods. Test piece for all welded metal test specimens in steel, nickel and nickel alloys
• EN 1597-2: 1997; Welding consumables. Test methods. Test piece preparation for one-run and two-run technical test specimens on steel
• EN 1597-3: 1997; Welding consumables. Test methods. Test of positional capacity of welding consumables in a fillet weld
• EN 1598: 1998; Health and safety in welding and related processes. Transparent welding curtains, strips and screens for arc welding processes.
• EN 1598: 2011; Health and safety in welding and related processes. Transparent welding curtains, strips and screens for arc welding processes.
• EN 1599: 1997; Welding consumables. Covered electrodes for manual metal arc welding of creep resistant steels. classification
• EN 1600: 1997; Welding consumables. Covered electrodes for manual metal arc welding of stainless and refractory steels. classification
• EN 1601: 1997; Test methods for petroleum and its products. Liquid petroleum products. Unleaded gasoline. Determination of organic oxygenated compounds and organically bound total oxygen content by gas chromatography (O-FID).
• EN 1601: 2014; Liquid petroleum products. Unleaded gasoline. Determination of organic oxygenated compounds and organically bound total oxygen content by gas chromatography (O-FID).
• EN 1602: 1997; Thermal insulation products for building applications. Determination of apparent density.
• EN 1602: 2013; Thermal insulation products for building applications. Determination of apparent density.
• EN 1603: 1997; Thermal insulation products for building applications. Determination of dimensional stability under constant normal laboratory conditions (23^DC/50% RH).
• EN 1603: 2013; Thermal insulation products for building applications. Determination of dimensional stability under constant normal laboratory conditions (23^DC/50% RH).
• EN 1604: 1996; Thermal insulation products for building applications. Determination of dimensional stability at specified temperature and humidity conditions.
• EN 1604: 2013; Thermal insulation products for building applications. Determination of dimensional stability at specified temperature and humidity conditions.
• EN 1605: 1997; Thermal insulation products for building applications. Determination of deformation under specified pressure load and temperature conditions.
• EN 1605: 2013; Thermal insulation products for building applications. Determination of deformation under specified pressure load and temperature conditions.

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.