EN European Norm Tests Part 25

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 1352: 1997; Determination of the static modulus of elasticity under compression of open structure autoclaved aerated concrete or lightweight aggregate concrete.
• EN 1353: 1997; Determination of moisture content of autoclaved aerated concrete.
• EN 1354: 1997; Determination of compressive strength of open structure lightweight aggregate concrete.
• EN 1354:2005; Determination of compressive strength of open structure lightweight aggregate concrete.
• EN 1355: 1997; Determination of creep strains under compression of autoclaved aerated concrete or open structure lightweight aggregate concrete.
• EN 1356: 1997; Performance test for prefabricated reinforced components of autoclaved aerated concrete or open-structured lightweight aggregate concrete under transverse load.
• EN 1360: 1997; Rubber hoses and hose assemblies for metered fuel delivery. Specification.
• EN 1360 : 2005 ; Rubber and plastic hoses and hose assemblies for metered fuel delivery systems. Specification.
• EN 1360 : 2013 ; Rubber and plastic hoses and hose assemblies for metered fuel delivery systems. Specification.
• EN 1361: 1997; Rubber hoses and hose assemblies for aviation fuel use. Specification.
• EN 1362: 1997; ID card systems. Device interface properties. Classes of device interfaces.
• EN 1363-1: 1999; Fire resistance tests. General Requirements
• EN 1363-1: 2012; Fire resistance tests. General Requirements
• EN 1363-2: 1999; Fire resistance tests. Alternative and additional procedures
• EN 1364-1: 1999; Fire resistance tests for non-load bearing elements. walls
• EN 1364-1: 2015; Fire resistance tests for non-load bearing elements. walls
• EN 1364-2: 1999; Fire resistance tests for non-load bearing elements. ceilings
• EN 1364-3: 2006; Fire resistance tests for non-load bearing elements. Curtain wall. Full configuration (complete assembly)
• EN 1364-3: 2014; Fire resistance tests for non-load bearing elements. Curtain wall. Full configuration (complete assembly)
• EN 1364-4:2007; Fire resistance tests for non-load bearing elements. Curtain wall. Part configuration
• EN 1364-4: 2014; Fire resistance tests for non-load bearing elements. Curtain wall. Part configuration
• EN 1365-1: 1999; Fire resistance tests for load bearing elements. walls
• EN 1365-1: 2012; Fire resistance tests for load bearing elements. walls
• EN 1365-2: 2000; Fire resistance tests for load bearing elements. Floors and roofs
• EN 1365-2: 2014; Fire resistance tests for load bearing elements. Floors and roofs
• EN 1365-3: 2000; Fire resistance tests for load bearing elements. beams
• EN 1365-4: 1999; Fire resistance tests for load bearing elements. columns
• EN 1366-1: 1999; Fire resistance tests for service installations. Fire resistance tests for service installations. channels
• EN 1366-1: 2014; Fire resistance tests for service installations. ventilation ducts
• EN 1366-2: 1999; Fire resistance tests for service installations. fire dampers
• EN 1366-2: 2015; Fire resistance tests for service installations. fire dampers
• EN 1366-3: 2009; Fire resistance tests for service installations. penetration seals
• EN 1366-4 : 2006+A1 : 2010 ; Fire resistance tests for service installations. linear joint seals
• EN 1366-5: 2010; Fire resistance tests for service installations. Service channels and miles
• EN 1366-9 : 2008 ; Fire resistance tests for service installations. Single chamber smoke evacuation ducts
• EN 1366-10: 2011; Fire resistance tests for service installations. smoke control dampers
• EN 1366-12: 2014; Fire resistance tests for service installations. Non-mechanical fire barrier for ventilation ducts
• EN 1367-1 : 2000 ; Tests for thermal and weathering properties of aggregates. Determination of resistance to freezing and thawing
• EN 1367-1: 2007; Tests for thermal and weathering properties of aggregates. Determination of resistance to freezing and thawing
• EN 1367-2: 1998; Tests for thermal and weathering properties of aggregates. Magnesium sulfate test
• EN 1367-2: 2009; Tests for thermal and weathering properties of aggregates. Magnesium sulfate test
• EN 1367-3: 2001; Tests for thermal and weathering properties of aggregates. Boiling test for Sonnenbrand basalt
• EN 1367-4: 1998; Tests for thermal and weathering properties of aggregates. Determination of drying shrinkage
• EN 1367-4: 2008; Tests for thermal and weathering properties of aggregates. Determination of drying shrinkage
• EN 1367-5: 2011; Tests for thermal and weathering properties of aggregates. Determination of resistance to thermal shock
• EN 1367-6: 2008; Tests for thermal and weathering properties of aggregates. Determination of resistance to freezing and thawing in the presence of salt (NaCl)
• EN 1367-7: 2014; Tests for thermal and weathering properties of aggregates. Determination of resistance to freezing and thawing of lightweight aggregates
• EN 1367-8: 2014; Tests for thermal and weathering properties of aggregates. Determination of Resistance to Fragmentation of Lightweight Aggregates
• EN 1370: 1997; founder. Surface roughness inspection with visual tactile comparators.
• EN 1370: 2011; founder. Examination of the surface condition.
• EN 1371-1: 1997; founder. Liquid penetrating examination. Sand, gravity mold and low pressure die castings
• EN 1371-1: 2011; founder. Liquid penetrant test. Sand, gravity mold and low pressure die castings
• EN 1371-2: 1998; founder. Liquid penetrating examination. Investment breakdowns
• EN 1371-2: 2015; founder. Liquid penetrant test. Investment breakdowns
• EN 1372: 2000; Adhesives. Test method for adhesives for floor and wall coverings. Peel test.
• EN 1372: 2015; Adhesives. Test method for adhesives for floor and wall coverings. Peel test.
• EN 1373: 2000; Adhesives. Test method for adhesives for floor and wall coverings. Shear test.
• EN 1373: 2015; Adhesives. Test method for adhesives for floor and wall coverings. Shear test.
• EN 1374 : 2000+A1 : 2010 ; Agricultural machinery. Silos fixed unloaders for round silos. Safety.
• EN 1376: 1997; Foodstuffs. Determination of saccharin in table top sweetener preparations. Spectrometric method.
• EN 1377: 1997; Foodstuffs. Determination of acesulfame K in table top sweetener preparations. Spectrometric method.
• EN 1378: 1997; Foodstuffs. Determination of aspartame in table top sweetener preparations. High performance liquid chromatography method.
• EN 1379: 1997; Foodstuffs. Determination of cyclamate and saccharin in liquid table top sweetener preparations. High performance liquid chromatography method.
• EN 1380: 1999; wooden structures. Test methods. Load bearing spiked connections.
• EN 1380 : 2009 ; wooden structures. Test methods. Load bearing nails, screws, dowels and bolts.
• EN 1381: 1999; wooden structures. Test methods. Load bearing stapled connections.
• EN 1381: 2016; wooden structures. Test methods. Load bearing stapled connections.
• EN 1382: 1999; wooden structures. Test methods. Tensile capacity of wooden fasteners.
• EN 1382: 2016; Wooden Structures. Test methods. Tensile capacity of wooden fasteners.
• EN 1383: 1999; wooden structures. Test methods. Tensile strength of wooden fasteners.
• EN 1383: 2016; wooden structures. Test methods. Pull the resistance of the wooden fasteners.
• EN 1384: 1997; Helmet specifications for equestrian activities.
• EN 1385: 1998; Helmets for canoeing and water sports.
• EN 1385: 2012; Helmets for canoeing and white water sports.
• EN 1386 : 2007 ; Aluminum and aluminum alloys. Back plate. Features
• EN 1387: 1997; Machine readable cards. Health applications. cards. General features.
• EN 1388-1: 1996; Materials and articles that come into contact with foodstuffs. silicate surfaces. Determination of lead and cadmium release from ceramic ware
• EN 1388-2: 1996; Materials and articles that come into contact with foodstuffs. silicate surfaces. Determination of lead and cadmium release from silicate surfaces other than ceramic ware
• EN 1390: 2006; Wood preservatives. Determination of eradicant effect against Hylotrupes bajulus (Linnaeus) larvae. Laboratory method.
• EN 1391: 1998; Adhesives for leather and shoe materials. A method for assessing the bondability of materials. Minimum requirements and material classification.
• EN 1392: 1998; Adhesives for leather and shoe materials. Solvent-based and dispersion adhesives. Test methods for measuring bond strength under specified conditions.
• EN 1392: 2006; Adhesives for leather and shoe materials. Solvent-based and dispersion adhesives. Testing bond strength under specified conditions.
• EN 1393: 1997; Plastic piping systems. Glass reinforced thermoset plastic (GRP) pipes. Determination of initial longitudinal tensile properties.
• EN 1394: 1997; Plastic piping systems. Glass reinforced thermoset plastic (GRP) pipes. Determination of the first apparent circumferential tensile strength.
• EN 1395-1: 2007; Thermal spray. Acceptance inspection of thermal spray equipment. General Requirements
• EN 1395-2: 2007; Thermal spray. Acceptance inspection of thermal spray equipment. Flame spray including HVOF
• EN 1395-3: 2007; Thermal spray. Acceptance inspection of thermal spray equipment. arc spray
• EN 1395-4:2007; Thermal spray. Acceptance inspection of thermal spray equipment. plasma spray
• EN 1395-5: 2007; Thermal spray. Acceptance inspection of thermal spray equipment. Plasma spraying in rooms
• EN 1395-6:2007; Thermal spray. Acceptance inspection of thermal spray equipment. manipulator systems
• EN 1395-7:2007; Thermal spray. Acceptance inspection of thermal spray equipment. Powder feeding system
• EN 1395: 1996; Thermal spray. Acceptance inspection of thermal spray equipment.
• EN 1396: 1997; Aluminum and aluminum alloys. Coil coated sheet and strip for general applications. Features
• EN 1396: 2007; Aluminum and aluminum alloys. Coil coated sheet and strip for general applications. Features
• EN 1396: 2015; Aluminum and aluminum alloys. Coil coated sheet and strip for general applications. Features
• EN 1397: 1999; heat exchangers. Hydronic room fan coil units. Test procedures to determine performance.
• EN 1397: 2015; heat exchangers. Hydronic room fan coil units. Test procedures to determine performance.
• EN 1399: 1998; Flexible floor coverings. Determination of resistance to moldy and burning cigarettes.
• EN 1400 : 2013+A1 : 2014 ; Child use and care articles. Pacifiers for babies and toddlers. Security requirements and test methods.
• EN 1401-1: 1998; Plastic piping systems for pressure-free underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U). Specifications for pipes, fittings and system

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.