EN European Norm Tests Part 60

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 12051 : 2000 ; Building equipment. Door and window bolts. Requirements and test methods.
• EN 12055: 1998; Liquid chiller packages and heat pumps with electrically driven compressors. Cooling mode. Definitions, tests and requirements.
• EN 12056-1 : 2000 ; Gravity drainage systems inside buildings. General and performance requirements
• EN 12056-2: 2000; Gravity drainage systems inside buildings. Plumbing, layout and calculation
• EN 12056-3: 2000; Gravity drainage systems inside buildings. Roof drainage, its layout and calculation
• EN 12056-4: 2000; Gravity drainage systems inside buildings. Waste water lifting plants. Layout and calculation
• EN 12056-5: 2000; Gravity drainage systems inside buildings. Installation and testing, operating, maintenance and operating instructions
• EN 12057 : 2004 ; Natural stone products. Modular tiles. requirements.
• EN 12057 : 2015 ; Natural stone products. Modular tiles. requirements.
• EN 12058 : 2004 ; Natural stone products. Slabs for floors and stairs. requirements.
• EN 12058 : 2015 ; Natural stone products. Slabs for floors and stairs. requirements.
• EN 12059 : 2008+A1 : 2011 ; Natural stone products. Dimensional stonework. requirements.
• EN 12060: 1998; Zinc and zinc alloys. Sampling method. Features
• EN 12061 : 1999 ; Plastic piping systems. Thermoplastic fittings. Test method for impact resistance.
• EN 12062: 1998; Non-destructive testing of welds. General rules for metallic materials.
• EN 12063 : 1999 ; Execution of special geotechnical works. Sheet pile walls.
• EN 12065: 1998; Plants and equipment for liquefied natural gas. Testing of foam concentrates designed for medium and high expansion foam production and extinguishing powders used in liquefied natural gas fires.
• EN 12066: 1998; Plants and equipment for liquefied natural gas. Testing of insulation linings for liquefied natural gas filling areas.
• EN 12067-1 : 1999 ; Gas/air ratio controls for gas burners and gas appliances. pneumatic types
• EN 12068 : 1999 ; cathodic protection. External organic coatings for corrosion protection of buried or submerged steel pipelines used in conjunction with cathodic protection. Tapes and shrinkable materials.
• EN 12070: 2000; Welding consumables. Wire electrodes, wires and rods for arc welding of creep resistant steels. classification
• EN 12071 : 2000 ; Welding consumables. Tubular electrodes for gas shielded metal arc welding of creep resistant steels. classification
• EN 12072 : 2000 ; Welding consumables. Wire electrodes, wires and rods for arc welding of stainless and heat-resistant steels. classification
• EN 12073: 2000; Welding consumables. Tubular cored electrodes for metal arc welding with or without gas shielding of stainless and refractory steels. classification
• EN 12074 : 2000 ; Welding consumables. Quality requirements for the manufacture, supply and distribution of consumables for welding and related processes.
• EN 12077-2 : 1998+A1 : 2008 ; Crane safety. Health and safety requirements. Limiting and indicating devices
• EN 12078: 1998; Zero regulators for gas burners and gas appliances.
• EN 12079-1 : 2006 ; Offshore containers and associated lifting sets. Offshore containers. Design, manufacture and branding
• EN 12079-2: 2006; Offshore containers and associated lifting sets. Lifting kits. Design, manufacture and branding
• EN 12079-3: 2006; Offshore containers and associated lifting sets. Periodic inspection, inspection and testing
• EN 12079 : 1999 ; Offshore containers. Design, construction, testing, inspection and marking.
• EN 12080: 1998; Railway applications. axle boxes. bearings.
• EN 12080 : 2007+A1 : 2010 ; Railway applications. axle boxes. bearings.
• EN 12081: 1998; Railway applications. axle boxes. Lubricating greases.
• EN 12081 : 2007+A1 : 2010 ; Railway applications. axle boxes. Lubricating greases.
• EN 12082: 1998; Railway applications. axle boxes. Performance testing.
• EN 12082 : 2007+A1 : 2010 ; Railway applications. axle boxes. Performance testing.
• EN 12083: 1998; Respiratory protective devices. Filters with breathing tube, (non-mask-mounted filters). Particulate filters, gas filters and combined filters. Requirements, testing, marking.
• EN 12084 : 2001 ; Non-destructive testing. Eddy current test. General principles and guidelines.
• EN 12085 : 1997 ; Thermal insulation products for building applications. Determination of linear dimensions of test samples.
• EN 12085 : 2013 ; Thermal insulation products for building applications. Determination of linear dimensions of test samples.
• EN 12086: 1997; Thermal insulation products for building applications. Determination of water vapor permeability properties.
• EN 12086: 2013; Thermal insulation products for building applications. Determination of water vapor permeability properties.
• EN 12087: 1997; Thermal insulation products for building applications. Determination of long-term water absorption by immersion.
• EN 12087: 2013; Thermal insulation products for building applications. Determination of long-term water absorption by immersion.
• EN 12088: 1997; Thermal insulation products for building applications. Determination of long-term water absorption by diffusion.
• EN 12088: 2013; Thermal insulation products for building applications. Determination of long-term water absorption by diffusion.
• EN 12089: 1997; Thermal insulation products for building applications. Determination of bending behavior.
• EN 12089: 2013; Thermal insulation products for building applications. Determination of bending behavior.
• EN 12090: 1997; Thermal insulation products for building applications. Determination of cutting behavior.
• EN 12090: 2013; Thermal insulation products for building applications. Determination of cutting behavior.
• EN 12091: 1997; Thermal insulation products for building applications. Determination of freeze-thaw resistance.
• EN 12091: 2013; Thermal insulation products for building applications. Determination of freeze-thaw resistance.
• EN 12094-5: 2001; Fixed fire extinguishing systems. Components for gas extinguishing systems. Requirements and test methods for high and low pressure selector valves and their actuators for CO2 systems
• EN 12094-5: 2006; Fixed fire extinguishing systems. Components for gas extinguishing systems. Requirements and test methods for high and low pressure selector valves and their actuators
• EN 12094-6: 2001; Fixed fire extinguishing systems. Components for gas extinguishing systems. Requirements and test methods for non-electrical disconnecting devices for CO2 systems
• EN 12094-6: 2006; Fixed fire extinguishing systems. Components for gas extinguishing systems. Requirements and test methods for non-electrical trip devices
• EN 12094-7: 2001; Fixed fire extinguishing systems. Components for gas extinguishing systems. Requirements and test methods for nozzles for CO2 systems
• EN 12094-8: 1998; Fixed fire extinguishing systems. Components for gas extinguishing systems. Requirements and test methods for flexible connectors for CO$d2 ​​systems
• EN 12094-8: 2006; Fixed fire extinguishing systems. Components for gas extinguishing systems. Requirements and test methods for connectors
• EN 12094-13: 2001; Fixed fire extinguishing systems. Components for gas extinguishing systems. Requirements and test methods for check valves and check valves
• EN 12095 : 1997 ; Plastic piping systems. Brackets for rainwater piping systems. Test method for bracket strength.
• EN 12096: 1997; Mechanical vibration. Declaration and verification of vibration emission values.
• EN 12097 : 2006 ; Ventilation for buildings. Requirements for duct system components to facilitate maintenance of duct systems.
• EN 12098-1 : 2013 ; Controls for heating systems. Control equipment for hot water heating systems
• EN 12098-3: 2013; Controls for heating systems. Control equipment for electric heating systems
• EN 12098-4: 2005; Controls for heating systems. Optimal start-stop control equipment for electrical systems
• EN 12098-5 : 2005 ; Controls for heating systems. Start-stop programmers for heating systems
• EN 12099: 1997; Plastic piping systems. Polyethylene pipe materials and components. Determination of volatile content.
• EN 12100: 1998; Plastic piping systems. Polyethylene (PE) valves. Test method for resistance to bending between supports.
• EN 12101-1 : 2005+A1 : 2006 ; Smoke and heat control systems. Specifications for smoke barriers
• EN 12101-3: 2015; Smoke and heat control systems. Technical specifications for electric smoke and temperature controlled ventilators (Fans)
• EN 12101-6: 2005; Smoke and heat control systems. Specifications for pressure difference systems. kits
• EN 12101-7: 2011; Smoke and heat control systems. smoke duct sections
• EN 12101-8: 2011; Smoke and heat control systems. smoke control dampers
• EN 12101-10: 2005; Smoke and heat control systems. power supplies
• EN 12102: 2008; Air conditioners, liquid cooling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling. Measurement of airborne noise. Determination of sound power level.
• EN 12102: 2013; Air conditioners, liquid cooling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling. Measurement of airborne noise. Determination of sound power level.
• EN 12103: 1999; Flexible floor coverings. Agglomerated cork substrates. Specification.
• EN 12105: 1998; Flexible floor coverings. Determination of moisture content of agglomerated cork.
• EN 12106: 1998; Plastic piping systems. Polyethylene (PE) pipes. Test method for resistance to internal pressure after tightening.
• EN 12107: 1998; Plastic piping systems. Injection molded thermoplastic fittings, valves and ancillary equipment. Determination of long-term hydrostatic strength of thermoplastic materials for injection molding of pipe components.
• EN 12110: 2014; Tunneling machines. Air locks. Security requirements.
• EN 12111: 2014; Tunneling machines. Road headers and permanent miners. Security requirements.
• EN 12114: 2000; Thermal performance of buildings. Air permeability of building elements and building elements. Laboratory test methods.
• EN 12115 : 2000 ; Rubber and thermoplastic hoses and hose assemblies for liquid or gaseous chemicals. Specification.
• EN 12115 : 2011 ; Rubber and thermoplastic hoses and hose assemblies for liquid or gaseous chemicals. Specification.
• EN 12117: 1998; Plastic piping systems. Fittings, valves and auxiliary parts. Determination of gas flow rate/pressure drop relationships.
• EN 12118: 1998; Plastic piping systems. Determination of moisture content in thermoplastics by coulometry.
• EN 12119: 1997; Plastic piping systems. Polyethylene (PE) valves. Test method for resistance to thermal cycling.
• EN 12120 : 1999 ; Chemicals used in the treatment of water intended for human consumption. Sodium hydrogen sulfide.
• EN 12120 : 2005 ; Chemicals used in the treatment of water intended for human consumption. Sodium hydrogen sulfide.
• EN 12120 : 2012 ; Chemicals used in the treatment of water intended for human consumption. Sodium hydrogen sulfide.
• EN 12121 : 1999 ; Chemicals used to treat water intended for human consumption. Sodium disulfide.
• EN 12121 : 2005 ; Chemicals used to treat water intended for human consumption. Sodium disulfide.
• EN 12121 : 2012 ; Chemicals used to treat water intended for human consumption. Sodium disulfide.
• EN 12122 : 1999 ; Chemicals used in the treatment of water intended for human consumption. Ammonia solution.
• EN 12122 : 2005 ; Chemicals used in the treatment of water intended for human consumption. Ammonia solution.
• EN 12123 : 1999 ; Chemicals used to treat water intended for human consumption. Ammonium sulfate.
• EN 12123 : 2005 ; Chemicals used to treat water intended for human consumption. Ammonium sulfate.

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.