EN European Norm Tests Part 13

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 726-3: 1996; ID card systems. Telecommunication. Integrated circuit(s) boards and terminals. Application-independent card requirements
• EN 726-4: 1995; ID card systems. Telecommunication. Integrated circuit(s) boards and terminals. Terminal requirements for the application independent card
• EN 726-5: 1999; ID card systems. Telecommunication. Integrated circuit(s) boards and terminals. Payment methods
• EN 726-6: 1996; ID card systems. Telecommunication. Integrated circuit(s) boards and terminals. Telecommunications features
• EN 726-7: 1999; ID card systems. Telecommunication. Integrated circuit(s) boards and terminals. Security module
• EN 727: 1995; Plastic pipe and duct systems. Thermoplastic pipes and fittings. Determination of the Vicat softening temperature (VST).
• EN 728: 1997; Plastic pipe and duct systems. Polyolefin pipes and fittings. Determination of oxidation induction time.
• EN 729-1: 1995; Quality requirements for welding. Fusion welding of metallic materials. Guidelines for selection and use
• EN 729-2: 1995; Quality requirements for welding. Fusion welding of metallic materials. Comprehensive quality requirements
• EN 729-3: 1995; Quality requirements for welding. Fusion welding of metallic materials. Standard quality requirements
• EN 729-4: 1995; Quality requirements for welding. Fusion welding of metallic materials. Basic quality requirements
• EN 730: 1995; Gas welding equipment. Equipment for gas welding, cutting and similar operations, safety devices for fuel gases and oxygen or compressed air. General specifications, requirements and tests.
• EN 731: 1996; Gas welding equipment. Air suction hand blow pipes. Features and tests.
• EN 732: 1999; Specifications for special liquefied petroleum gas devices. Absorption refrigerators.
• EN 733: 1995; End-suction centrifugal pumps, 10 bar with bearing bracket. Nominal mission point, main dimensions, naming system.
• EN 734: 1995; Side channel pumps PN 40 ; Nominal mission point, main dimensions, naming system.
• EN 735: 1995; Overall dimensions of rotodynamic pumps. tolerances.
• EN 736-1: 1995; valves. terminology. Description of valve types
• EN 736-2: 1997; valves. terminology. Description of valve components
• EN 736-2: 2016; valves. terminology. Description of valve components
• EN 737-2: 1998; Medical gas pipeline systems. Anesthetic scrubber disposal systems. Basic requirements
• EN 737-3: 2000; Medical gas pipeline systems. Pipelines for compressed medical gases and vacuum
• EN 737-4: 1998; Medical gas pipeline systems. Terminal units for anesthetic gas cleaning systems
• EN 738-1: 1997; Pressure regulators for use with medical gases. Pressure regulators and pressure regulators with flow meters
• EN 738-2: 1999; Pressure regulators for use with medical gases. Manifold and line pressure regulators
• EN 738-3: 1999; Pressure regulators for use with medical gases. Pressure regulators integrated with cylinder valves
• EN 738-4: 1999; Pressure regulators for use with medical gases. Low pressure regulators intended for inclusion in medical equipment
• EN 739: 1998; Low pressure hose assemblies for use with medical gases.
• EN 740: 1999; Anesthetic workstations and modules. Special requirements.
• EN 741 : 2000+A1 : 2010 ; Continuous handling equipment and systems. Safety requirements for systems and components for pneumatic conveying of bulk materials.
• EN 742: 1994; ID cards. ID-1 card. Location of contacts for cards and devices used in Europe.
• EN 743: 1995; Plastic pipe and duct systems. Thermoplastic pipes. Determination of longitudinal return.
• EN 744: 1996; Plastic pipe and duct systems. Thermoplastic pipes. Test method for resistance to external impacts using the 24-hour method.
• EN 745 : 1999+A1 : 2009 ; Agricultural machinery. Rotary mowers and Mowers. Safety.
• EN 746-1 : 1997+A1 : 2009 ; Industrial heat treatment equipment. Common safety requirements for industrial heat treatment equipment
• EN 746-2: 1997; Industrial heat treatment equipment. Safety requirements for combustion and fuel handling systems
• EN 746-2: 2010; Industrial heat treatment equipment. Safety requirements for combustion and fuel handling systems
• EN 746-3 : 1997+A1 : 2009 ; Industrial heat treatment equipment. Safety requirements for the production and use of atmospheric gases
• EN 746-4: 2000; Industrial heat treatment equipment. Special safety requirements for hot dip galvanizing heat treatment equipment
• EN 747-1: 1993; Furniture. Bunk beds for home use. Security requirements
• EN 747-1: 2007; Furniture. Bunk beds and high beds for home use. Safety, strength and endurance requirements
• EN 747-1 : 2012+A1 : 2015 ; Furniture. Bunk beds and high beds. Safety, strength and endurance requirements
• EN 747-2: 1993; Furniture. Bunk beds for home use. Test methods
• EN 747-2: 2007; Furniture. Bunk beds and high beds for home use. Test methods
• EN 747-2 : 2012+A1 : 2015 ; Furniture. Bunk beds and high beds. Test methods
• EN 748: 1996; playground equipment. Football goals. Functional and safety requirements, test methods.
• EN 748: 2013; playground equipment. Football goals. Functional and safety requirements, test methods.
• EN 749: 1996; playground equipment. Handball goals. Functional and safety requirements, test methods.
• EN 750: 1996; playground equipment. Hockey goals. Functional and safety requirements, test methods.
• EN 751-1: 1997; Sealing materials for metallic threaded connections in contact with 1st, 2nd and 3rd family gases and hot water. Anaerobic coupling compounds
• EN 751-2: 1997; Sealing materials for metallic threaded connections in contact with 1st, 2nd and 3rd family gases and hot water. Non-hardening joint compounds
• EN 751-3: 1997; Sealing materials for metallic threaded connections in contact with 1st, 2nd and 3rd family gases and hot water. Unsintered PTFE tapes
• EN 752-1: 1996; Drainage and sewer systems outside buildings. Generalizations and definitions
• EN 752-2: 1997; Drainage and sewer systems outside buildings. performance requirements
• EN 752-3: 1997; Drainage and sewer systems outside buildings. Planning
• EN 752-4: 1998; Drainage and sewer systems outside buildings. Hydraulic design and environmental considerations
• EN 752-5: 1998; Drainage and sewer systems outside buildings. Rehabilitation
• EN 752-6: 1998; Drainage and sewer systems outside buildings. pumping plants
• EN 752-7: 1998; Drainage and sewer systems outside buildings. Maintenance and operations
• EN 753-1: 1997; ID card systems. Intersector thin flexible cards. General specifications
• EN 753-2: 1997; ID card systems. Intersector thin flexible cards. magnetic recording technique
• EN 753-3: 1999; ID card systems. Intersector thin flexible cards. Test methods
• EN 754-1: 1997; Aluminum and aluminum alloys. Cold drawn bar/bar and tube. Technical conditions for inspection and delivery
• EN 754-1: 2008; Aluminum and aluminum alloys. Cold drawn bar/bar and tube. Technical conditions for inspection and delivery
• EN 754-1: 2016; Aluminum and aluminum alloys. Cold drawn bar/bar and tube. Technical conditions for inspection and delivery
• EN 754-2: 1997; Aluminum and aluminum alloys. Cold drawn bar/bar and tube. Mechanical properties
• EN 754-2: 2008; Aluminum and aluminum alloys. Cold drawn bar/bar and tube. Mechanical properties
• EN 754-2: 2013; Aluminum and aluminum alloys. Cold drawn bar/bar and tube. Mechanical properties
• EN 754-2: 2016; Aluminum and aluminum alloys. Cold drawn bar/bar and tube. Mechanical properties
• EN 754-3: 1996; Aluminum and aluminum alloys. Cold drawn bar/bar and tube. Round bars, size and form tolerances
• EN 754-3: 2008; Aluminum and aluminum alloys. Cold drawn bar/bar and tube. Round bars, size and form tolerances
• EN 754-4: 1996; Aluminum and aluminum alloys. Cold drawn bar/bar and tube. Square bars, dimensions and tolerances in form
• EN 754-4:2008; Aluminum and aluminum alloys. Cold drawn bar/bar and tube. Square bars, dimensions and tolerances in form
• EN 754-5: 1996; Aluminum and aluminum alloys. Cold drawn bar/bar and tube. Rectangular bars, size and form tolerances
• EN 754-5: 2008; Aluminum and aluminum alloys. Cold drawn bar/bar and tube. Rectangular bars, size and form tolerances
• EN 754-6: 1996; Aluminum and aluminum alloys. Cold drawn bar/bar and tube. Hexagonal bars, size and form tolerances
• EN 754-6: 2008; Aluminum and aluminum alloys. Cold drawn bar/bar and tube. Hexagonal bars, size and form tolerances
• EN 754-7: 1998; Aluminum and aluminum alloys. Cold drawn bar/bar and tube. Seamless pipes, size and form tolerances
• EN 754-7: 2008; Aluminum and aluminum alloys. Cold drawn bar/bar and tube. Seamless pipes, size and form tolerances
• EN 754-7: 2016; Aluminum and aluminum alloys. Cold drawn bar/bar and tube. Seamless pipes, size and form tolerances
• EN 754-8: 1998; Aluminum and aluminum alloys. Cold drawn bar/bar and tube. Port pipes, size and form tolerances
• EN 754-8: 2008; Aluminum and aluminum alloys. Cold drawn bar/bar and tube. Port pipes, size and form tolerances
• EN 754-8: 2016; Aluminum and aluminum alloys. Cold drawn bar/bar and tube. Port pipes, size and form tolerances
• EN 755-1: 1997; Aluminum and aluminum alloys. Extruded bar/bar, pipe and profiles. Technical conditions for inspection and delivery
• EN 755-1: 2008; Aluminum and aluminum alloys. Extruded bar/bar, pipe and profiles. Technical conditions for inspection and delivery
• EN 755-1: 2016; Aluminum and aluminum alloys. Extruded bar/bar, pipe and profiles. Technical conditions for inspection and delivery
• EN 755-2: 1997; Aluminum and aluminum alloys. Extruded bar/bar, pipe and profiles. Mechanical properties
• EN 755-2: 2008; Aluminum and aluminum alloys. Extruded bar/bar, pipe and profiles. Mechanical properties
• EN 755-2: 2013; Aluminum and aluminum alloys. Extruded bar/bar, pipe and profiles. Mechanical properties
• EN 755-2: 2016; Aluminum and aluminum alloys. Extruded bar/bar, pipe and profiles. Mechanical properties
• EN 755-3: 1996; Aluminum and aluminum alloys. Extruded bar/bar, pipe and profiles. Round bars, size and form tolerances
• EN 755-3: 2008; Aluminum and aluminum alloys. Extruded bar/bar, pipe and profiles. Round bars, size and form tolerances
• EN 755-4: 1996; Aluminum and aluminum alloys. Extruded bar/bar, pipe and profiles. Square bars, dimensions and tolerances in form
• EN 755-4: 2008; Aluminum and aluminum alloys. Extruded bar/bar, pipe and profiles. Square bars, dimensions and tolerances in form
• EN 755-5: 1996; Aluminum and aluminum alloys. Extruded bar/bar, pipe and profiles. Rectangular bars, size and form tolerances
• EN 755-5: 2008; Aluminum and aluminum alloys. Extruded bar/bar, pipe and profiles. Rectangular bars, size and form tolerances
• EN 755-6: 1996; Aluminum and aluminum alloys. Extruded bar/bar, pipe and profiles. Hexagonal bars, size and form tolerances
• EN 755-6: 2008; Aluminum and aluminum alloys. Extruded bar/bar, pipe and profiles. Hexagonal bars, size and form tolerances
• EN 755-7: 1998; Aluminum and aluminum alloys. Extruded bar/bar, pipe and profiles. Seamless pipes, size and form tolerances
• EN 755-7: 2008; Aluminum and aluminum alloys. Extruded bar/bar, pipe and profiles. Seamless pipes, size and form tolerances

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.