EN European Norm Tests Part 120

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 60143-1: 1993; Series capacitors for power systems. General. Performance, testing and rating. Security requirements. Installation guide
• EN 60143-1 : 2004 ; Series capacitors for power systems. general
• EN 60143-1 : 2015 ; Series capacitors for power systems. general
• EN 60143-2: 1995; Series capacitors for power systems. Protective equipment for series capacitor banks
• EN 60143-2: 2013; Series capacitors for power systems. Protective equipment for series capacitor banks
• EN 60143-3: 1998; Series capacitors for power systems. Internal fuses
• EN 60143-3: 2015; Series capacitors for power systems. Internal fuses
• EN 60143-4: 2010; Series capacitors for power systems. Thyristor controlled series capacitors
• EN 60146-2: 2000; Semiconductor converters. General requirements and line commutated converters. Self-commutating semiconductor converters, including direct dc converters
• EN 60146-1-1: 1993; Semiconductor converters. General requirements and line commutated converters. Characteristics of the basic requirements
• EN 60146-1-1: 2010; Semiconductor converters. General requirements and line commutated converters. Indication of basic requirements
• EN 60146-1-3: 1993; Semiconductor converters. General requirements and line commutated converters. Transformers and reactors
• EN 60153-1: 2016; Hollow metallic waveguides. General requirements and measurement methods
• EN 60153-2: 2016; Hollow metallic waveguides. Related specifications for ordinary rectangular waveguides
• EN 60154-1: 1996; Flanges for waveguides. General Requirements
• EN 60154-1: 2016; Flanges for waveguides. General Requirements
• EN 60154-2: 1997; Flanges for waveguides. Related specifications for flanges for ordinary rectangular waveguides
• EN 60154-2: 2016; Flanges for waveguides. Related specifications for flanges for ordinary rectangular waveguides
• EN 60156: 1996; Insulating fluids. Determination of breakdown voltage at power frequency. Test method.
• EN 60168: 1995; Tests on internal and external post insulators made of ceramic material or glass for systems with a rated voltage higher than 1000 V.
• EN 60169-21: 1997; Radio frequency connectors. Two types of radio frequency connectors with an inner diameter of 9,5 mm (0,374 inch) outer conductor and different screw coupling versions. Characteristic impedance 50 ohms (types SC-A and SC-B)
• EN 60169-23 : 1994 ; Radio frequency connectors. Outer conductor Pin and socket connector for use with 3,5 mm rigid precision coaxial lines with an inner diameter of 0,1378 mm (3,5 inch)
• EN 60169-24 : 1994 ; Radio frequency connectors. Screw-coupled radio frequency coaxial connectors (Type F) typically for use in 75 ohm cable distribution systems
• EN 60169-25 : 1994 ; Radio frequency connectors. Two pole screw (13,56L-0.534 UNEF) coupled connectors (TWHN Type) for use with twin inner conductor shielded balanced cables with 9 mm (20 inch) outer conductor inner diameter
• EN 60172 : 1994+A2 : 2010 ; Test procedure for determining the temperature index of enameled winding wires.
• EN 60182-2: 1991; Basic dimensions of winding wires. Specification for maximum overall diameters of enamel coated round winding wires
• EN 60191-3: 2000; Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of integrated circuits
• EN 60191-4: 2000; Mechanical standardization of semiconductor devices. Classification by coding system and package outline formats for semiconductor device packages
• EN 60191-4: 2014; Mechanical standardization of semiconductor devices. Classification by coding system and package outline formats for semiconductor device packages
• EN 60191-6: 2004; Mechanical standardization of semiconductor devices. General guidelines for the preparation of outline drawings of surface mount semiconductor device packages
• EN 60191-6: 2009; Mechanical standardization of semiconductor devices. General guidelines for the preparation of outline drawings of surface mount semiconductor device packages
• EN 60191-6-3: 2001; Mechanical standardization of semiconductor devices. General guidelines for the preparation of outline drawings of surface mount semiconductor device packages. Measurement methods for pack sizes of quad flat packs (QFP)
• EN 60191-6-12: 2011; Mechanical standardization of semiconductor devices. General guidelines for the preparation of outline drawings of surface mount semiconductor device packages. Design guidelines for fine pitch terrain grid array (FLGA)
• EN 60191-6-13:2007; Mechanical standardization of semiconductor devices. Design guide of open top type sockets for fine pitch ball grid array and fine pitch black grid array (FBGA/FLGA)
• EN 60191-6-13: 2016; Mechanical standardization of semiconductor devices. Design guide of open-top type sockets for Fine Pitch Ball Grid Array (FBGA) and Fine Pitch Black Grid Array (FLGA)
• EN 60191-6-16 : 2007 ; Mechanical standardization of semiconductor devices. Glossary of semiconductor tests and combustible sockets for BGA, LGA, FBGA and FLGA
• EN 60191-6-17: 2011; Mechanical standardization of semiconductor devices. General guidelines for the preparation of outline drawings of surface mount semiconductor device packages. Design guide for stacked packages. Fine pitch ball grid array and fine pitch black grid array (P-PFBGA and P-PFLGA)
• EN 60191-6-18 : 2010 ; Mechanical standardization of semiconductor devices. General guidelines for the preparation of outline drawings of surface mount semiconductor device packages. Design guide for ball grid array (BGA)
• EN 60191-6-19: 2010; Mechanical standardization of semiconductor devices. Measuring methods of high temperature package skew and maximum allowable skewness
• EN 60191-6-20: 2010; Mechanical standardization of semiconductor devices. General guidelines for the preparation of outline drawings of surface mount semiconductor device packages. Measurement methods for package sizes of small outline J-lead packages (SOJ)
• EN 60191-6-21 : 2010 ; Mechanical standardization of semiconductor devices. General guidelines for the preparation of outline drawings of surface mount semiconductor device packages. Measurement methods for package sizes of small outline packages (SOP)
• EN 60191-6-22 : 2013 ; Mechanical standardization of semiconductor devices. General guidelines for the preparation of outline drawings of surface mount semiconductor device packages. Design guide for semiconductor packages Silicon Fine-Gap Ball Grid Array and Silicon Fine-Gap Black Grid Array (S-FBGA and S-FLGA)
• EN 60192 : 1993 ; Characteristics of low pressure sodium vapor lamps.
• EN 60193 : 1999 ; Hydraulic turbines, storage pumps and pump turbines. Model acceptance tests.
• EN 60194 : 2006 ; Printed board design, manufacture and assembly. Terms and definitions.
• EN 60195: 2016; Measurement method of current noise generated in fixed resistors.
• EN 60204-1: 1993; Machinery safety. Electrical equipment of machines. Specifications for general requirements
• EN 60204-1: 1998; Machinery safety. Electrical equipment of machines. General Requirements
• EN 60204-1 : 2006+A1 : 2009 ; Machinery safety. Electrical equipment of machines. General Requirements
• EN 60204-11: 2000; Machinery safety. Electrical equipment of machines. Requirements for HV equipment for voltages above 1000 V ac or 1500 V dc and not exceeding 36 kV
• EN 60204-31: 1998; Machinery safety. Electrical equipment of machines. Special safety and EMC requirements for sewing machines, units and systems
• EN 60204-31: 2013; Machinery safety. Electrical equipment of machines. Special safety and EMC requirements for sewing machines, units and systems
• EN 60204-32: 1998; Machinery safety. Electrical equipment of machines. Requirements for lifting machines
• EN 60204-32: 2008; Machinery safety. Electrical equipment of machines. Requirements for lifting machines
• EN 60204-33: 2011; Machinery safety. Electrical equipment of machines. Requirements for semiconductor manufacturing equipment
• EN 60204-3-1 : 1992 ; Machinery safety. Electrical equipment of machines. Special requirements for sewing machines, units and systems
• EN 60205 : 2006+A1 : 2009 ; Calculation of effective parameters of magnetic track parts.
• EN 60212: 2011; Standard conditions of use before and during testing of solid electrical insulating materials.
• EN 60214-1: 2014; Tap changers. Performance requirements and test methods
• EN 60215: 1996; Safety requirements for radio transmitting equipment.
• EN 60216-1: 2013; Electrical insulating materials. Thermal endurance properties. Aging procedures and evaluation of test results
• EN 60216-2: 2005; Electrical insulating materials. Thermal endurance properties. Determination of thermal resistance properties of electrical insulation materials. Test criteria selection
• EN 60216-3: 2006; Electrical insulating materials. Thermal endurance properties. Instructions for calculating thermal endurance characteristics
• EN 60216-5: 2008; Electrical insulating materials. Thermal endurance properties. Determination of the relative thermal endurance index (RTE) of an insulating material
• EN 60216-6: 2006; Electrical insulating materials. Thermal endurance properties. Determination of thermal endurance indices (TI and RTE) of an insulation material using the fixed time frame method
• EN 60216-8: 2013; Electrical insulating materials. Thermal endurance properties. Instructions for calculating thermal endurance characteristics using simplified procedures
• EN 60216-3-2: 1995; Guidance for the determination of thermal endurance properties of electrical insulating materials. Instructions for calculating thermal endurance characteristics. Calculations for missing data: Proving test results, including time to median endpoint (equal test groups)
• EN 60216-4-1: 2006; Electrical insulating materials. Thermal endurance properties. aging furnaces
• EN 60216-4-2: 2001; Guidance for the determination of thermal endurance properties of electrical insulating materials. Electrical insulating materials. Thermal endurance properties. Precision furnaces for use up to 300^DC
• EN 60229 : 2008 ; Electric cables. Tests on extruded outer sheaths with a special protective function.
• EN 60238 : 1992 ; Specifications for Edison screw sockets.
• EN 60238 : 1996 ; Specifications for Edison screw sockets.
• EN 60239: 1997; Nominal dimensions of cylindrical machined graphite electrodes with threaded sockets and nipples for use in electric arc furnaces.
• EN 60239: 2005; Graphite electrodes for electric arc furnaces. Dimensions and designation.
• EN 60240-1 : 1994 ; Characteristics of electric infrared emitters for industrial heating. shortwave infrared emitters
• EN 60243-1: 1998; Test methods for the electrical strength of solid insulating materials. Tests at power frequencies
• EN 60243-1 : 2013 ; Electrical strength of insulating materials. Test methods. Tests at power frequencies
• EN 60243-2: 2014; Electrical strength of insulating materials. Test methods. Additional requirements for tests using direct voltage
• EN 60243-3: 1994; Test methods for the electrical strength of solid insulating materials. Additional requirements for impact tests
• EN 60243-3: 2014; Electrical strength of insulating materials. Test methods. Additional requirements for 1,2/50 $GM s impulse tests
• EN 60244-1 : 2000 ; Measurement methods for radio transmitters. General specifications for broadcast transmitters
• EN 60244-5: 1995; Measurement methods for radio transmitters. Performance characteristics of television transmitters
• EN 60244-8: 1995; Measurement methods for radio transmitters. Performance characteristics of vestigial sideband demodulators used for testing television transmitters and transponders
• EN 60244-9: 1995; Measurement methods for radio transmitters. Performance specifications for television transmitters
• EN 60244-10: 1993; Measurement methods for radio transmitters. Measurement methods for television transmitters and streamers using insertion test signals
• EN 60244-11: 1993; Measurement methods for radio transmitters. Transponders for FM audio broadcasting
• EN 60244-13 : 1993 ; Measurement methods for radio transmitters. Performance specifications for FM audio broadcasting
• EN 60244-14: 1997; Measurement methods for radio transmitters. External intermodulation products caused by two or more transmitters using the same or adjacent antennas
• EN 60244-15 : 2000 ; Measurement methods for radio transmitters. Amplitude modulated transmitters for audio broadcasting
• EN 60244-12-1 : 1994 ; Measurement methods for radio transmitters. A guide to preparing explanatory brochures for transmitters and transponders for audio and television broadcasting. Features to be specified
• EN 60244-12-2 : 1994 ; Measurement methods for radio transmitters. A guide to preparing explanatory brochures for transmitters and transponders for audio and television broadcasting. Specification pages
• EN 60249-1 : 1993 ; Basic materials for printed circuits. Basic materials for printed circuits. Test methods
• EN 60249-2-1 : 1994 ; Specifications for phenolic cellulose paper copper clad laminated sheet, high electrical quality
• EN 60249-2-2 : 1994 ; Specifications, economic quality for phenolic cellulose paper copper clad laminated sheet
• EN 60249-2-3 : 1994 ; Features Metal-clad base materials for printed circuit boards. Copper plated base material. Specification for epoxide cellulose paper, copper-clad laminated sheet with defined flammability (vertical burning test)
• EN 60249-2-4 : 1994 ; Specifications for Epoxide woven glass fabric copper clad laminated sheet, general purpose quality
• EN 60249-2-5 : 1994 ; Features Specification No. 5 ; Epoxide woven glass cloth copper clad laminated sheet, defined flammability (vertical burning test)
• EN 60249-2-6 : 1994 ; Features Specification No.6; Phenolic cellulose paper copper-clad laminated sheet, defined flammability (horizontal burning test)
• EN 60249-2-7 : 1994 ; Features Specification No.7; Phenolic cellulose paper, copper-clad laminated sheet, defined flammability (vertical burning test)
• EN 60249-2-8 : 1995 ; Specifications Specification for flexible copper-clad polyester (PETP) film

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.