EN European Norm Tests Part 146

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 61191-4: 1999; Printed board assemblies. Section properties. Requirements for terminal soldered assemblies
• EN 61191-6: 2010; Printed board assemblies. Evaluation criteria and measurement methods for gaps in soldered joints of BGA and LGA
• EN 61192-5: 2007; Labor requirements for brazed electrical assemblies. Rework, replacement and repair of soldered electronics
• EN 61193-2: 2007; Quality assessment systems. Selection and use of sampling plans for inspection of electronic components and packages
• EN 61193-3: 2013; Quality assessment systems. Selection and use of sampling plans for printed cardboard and laminate end product and in-process inspection
• EN 61194: 1996; Characteristic parameters of stand-alone photovoltaic (PV) systems.
• EN 61195 : 1994 ; Double capped fluorescent lamps. Security features.
• EN 61195 : 1999+A2 : 2015 ; Double capped fluorescent lamps. Security features.
• EN 61196-2: 1997; Radio frequency cables. Features.. Semi-rigid radio frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation. section properties
• EN 61196-3: 1999; Radio frequency cables. Features Cross-section specifications for coaxial cables for local area networks
• EN 61196-10: 2016; Coaxial communication cables. Cross-section properties for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric
• EN 61196-3-2: 1998; Radio frequency cables. Features Coaxial cables for digital communication in horizontal ground wiring. Detail specification for coaxial cables with solid dielectric for local area networks with a reach of 185 m and up to 10 Mb/s
• EN 61196-3-3: 1998; Radio frequency cables. Features Coaxial cables for digital communication in horizontal ground wiring. Detail specification for coaxial cables with foamed dielectric for local area networks with a reach of 185 m and up to 10 Mb/s
• EN 61196-10-1: 2014; Coaxial communication cables. Blank detail specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric
• EN 61197: 1996; Insulating fluids. Linear flame propagation. Test method using glass fiber tape.
• EN 61198 : 1994 ; Mineral insulating oils. Methods for the determination of 2-furfural and related compounds.
• EN 61199 : 1994 ; Single cover fluorescent lamps. Security features.
• EN 61199 : 2000 ; Single cover fluorescent lamps. Security features.
• EN 61199 : 2011+A2 : 2015 ; Single cover fluorescent lamps. Security features.
• EN 61202-1: 2000; Fiber optic insulators. General specification
• EN 61202-1: 2009; Fiber optic interconnect devices and passive components. Fiber optic insulators. General specification
• EN 61203: 1995; Synthetic organic esters for electrical purposes. Guide to the maintenance of transformer esters in equipment.
• EN 61204-3: 2001; Low voltage power supplies, dc output. Electromagnetic compatibility (EMC)
• EN 61204-7: 2006; Low voltage power supplies, dc output. Security requirements
• EN 61204: 1995; Low voltage power supply devices, dc output. Performance characteristics and security requirements.
• EN 61205 : 1994 ; Ultrasonic properties. Dental descaling systems. Measurement and declaration of output characteristics.
• EN 61206: 1995; Ultrasonic. Continuous wave Doppler systems. Test procedures.
• EN 61207-1 : 1994 ; Statement of the performance of gas analyzers. general
• EN 61207-1 : 2010 ; Statement of the performance of gas analyzers. general
• EN 61207-2: 1994; Statement of the performance of gas analyzers. Oxygen in gas (using high temperature electrochemical sensors)
• EN 61207-6: 1994; Statement of the performance of gas analyzers. photometric analyzers
• EN 61207-6: 2015; Statement of the performance of gas analyzers. photometric analyzers
• EN 61207-7: 2013; Statement of the performance of gas analyzers. Tunable semiconductor laser gas analyzers
• EN 61209 : 1999 ; Marine navigation and radiocommunication equipment and systems. Integrated bridge systems (IBS). Operational and performance requirements, test methods and required test results.
• EN 61210 : 1995 ; Connecting devices. Straight quick-connect terminations for electrical copper conductors. Security requirements.
• EN 61210 : 2010 ; Connecting devices. Straight quick-connect terminations for electrical copper conductors. Security requirements.
• EN 61211 : 2005 ; Insulators of ceramic material or glass for overhead lines with a rated voltage greater than 1000 V. Impact puncture test in air.
• EN 61212-1: 1996; Industrial rigid round laminated pipes and rods based on thermosetting resins for electrical purposes. General Requirements
• EN 61212-1: 2006; Insulation materials. Industrial rigid round laminated pipes and rods based on thermosetting resins for electrical purposes. Definitions, definitions and general requirements
• EN 61212-2: 1996; Industrial rigid round laminated pipes and rods based on thermosetting resins for electrical purposes. test methods
• EN 61212-2: 2006; Insulation materials. Industrial rigid round laminated pipes and rods based on thermosetting resins for electrical purposes. test methods
• EN 61212-3-1: 1996; Industrial rigid round laminated pipes and rods based on thermosetting resins for electrical purposes. Specifications for individual materials. Round laminated rolled pipes
• EN 61212-3-1: 2006; Insulation materials. Industrial rigid round laminated pipes and rods based on thermosetting resins for electrical purposes. Specifications for individual materials
• EN 61212-3-1: 2013; Insulation materials. Industrial rigid round laminated pipes and rods based on thermosetting resins for electrical purposes. Specifications for individual materials. Page 1: Round laminated rolled pipes
• EN 61212-3-2: 1996; Industrial rigid round laminated pipes and rods based on thermosetting resins for electrical purposes. Specifications for individual materials. Round laminated molded pipes
• EN 61212-3-2: 2006; Insulation materials. Industrial rigid round laminated pipes and rods based on thermosetting resins for electrical purposes. Specifications for individual materials
• EN 61212-3-2: 2013; Insulation materials. Industrial rigid round laminated pipes and rods based on thermosetting resins for electrical purposes. Specifications for individual materials. Page 2: Round laminated molded pipes
• EN 61212-3-3: 1996; Industrial rigid round laminated pipes and rods based on thermosetting resins for electrical purposes. Specifications for individual materials. Round laminated molded bars
• EN 61212-3-3: 2006; Insulation materials. Industrial rigid round laminated pipes and rods based on thermosetting resins for electrical purposes. Specifications for individual materials
• EN 61213 : 1994 ; Analogue audio recording on videotape. magnetization polarity.
• EN 61215-1-1: 2016; Terrestrial photovoltaic (PV) modules. Design qualification and type approval. Special requirements for testing crystalline silicon photovoltaic (PV) modules
• EN 61215 : 1995 ; Crystalline silicon terrestrial photovoltaic (PV) modules. Design qualification and type approval.
• EN 61215 : 2005 ; Crystalline silicon terrestrial photovoltaic (PV) modules. Design qualification and type approval.
• EN 61217 : 1996+A2 : 2008 ; Radiotherapy equipment. Coordinates, movements and scales.
• EN 61217 : 2012 ; Radiotherapy equipment. Coordinates, movements and scales.
• EN 61219 : 1994 ; Live work. Grounding or grounding and short-circuiting equipment that uses a lance as a short-circuit device. Spear grounding.
• EN 61220: 1995; Ultrasonic. fields. A guide to the measurement and characterization of ultrasonic fields produced by medical ultrasonic equipment using hydrophones in the frequency range 0 MHz to 5 MHz.
• EN 61221: 1996; Petroleum products and lubricants. Triaryl phosphate ester turbine control fluids (ISO-L-TCD category). Features
• EN 61223-2-4: 1995; Evaluation and routine testing in medical imaging departments. Stability tests. Method for hard copy cameras
• EN 61223-2-5: 1995; Evaluation and routine testing in medical imaging departments. Stability tests. Method for image display devices
• EN 61223-2-6: 1995; Evaluation and routine testing in medical imaging departments. Stability tests. X-ray equipment method for computed tomography
• EN 61223-2-6: 2007; Evaluation and routine testing in medical imaging departments. Stability tests. Imaging performance of computed tomography X-ray equipment
• EN 61223-3-1: 1999; Evaluation and routine testing in medical imaging departments. Acceptance tests
• EN 61223-3-2: 1997; Evaluation and routine testing in medical imaging departments. Acceptance tests
• EN 61223-3-2: 2008; Evaluation and routine testing in medical imaging departments. Acceptance tests. Imaging performance of mammographic X-ray equipment
• EN 61223-3-3: 1997; Evaluation and routine testing in medical imaging departments. Acceptance tests
• EN 61226: 2010; Nuclear power plants. Instrumentation and control important for safety. Classification of instrumentation and control functions.
• EN 61227: 2016; Nuclear power plants. control rooms. Operator controls.
• EN 61228: 1995; A method of measuring and determining the UV radiation of ultraviolet lamps used for sun tanning.
• EN 61228 : 2008 ; Fluorescent ultraviolet lamps used for tanning. Measurement and specification method.
• EN 61229: 1996; Hard protective covers for live operation in AC installations.
• EN 61230: 1996; Live work. Portable equipment for grounding or grounding and short circuit.
• EN 61230: 2008; Live work. Portable equipment for grounding or grounding and short circuit.
• EN 61231 : 2010+A1 : 2013 ; International lamp coding system (ILCOS).
• EN 61232: 1997; Aluminum-clad steel wires for electrical purposes.
• EN 61234-1 : 1994 ; Test method for hydrolytic stability of electrical insulating materials. Test method for hydrolytic stability of electrical insulating materials. plastic films
• EN 61234-2: 1998; Test method for hydrolytic stability of electrical insulating materials. Molded thermosets
• EN 61235 : 1995 ; Live work. Insulating hollow pipes for electrical purposes.
• EN 61236 : 1995 ; Saddles, post clamps (bar clamps) and accessories for live work.
• EN 61236: 2011; Live work. Saddles, stick grips and accessories.
• EN 61237-1 : 1994 ; Publish video recorders. Measurement methods. Mechanical measurements
• EN 61237-2: 1995; Publish video recorders. Measurement methods. Electrical measurements of analog composite video signals
• EN 61237-3: 1995; Publish video recorders. Measurement methods. Electrical measurements for analog component video signals
• EN 61237-4: 1998; Publish video recorders. Measurement methods. Analog audio performance measurements
• EN 61240: 2012; Piezoelectric devices. Preparation of outline drawings of surface mounted devices (SMD) for frequency control and selection. General rules.
• EN 61241-0: 2006; Electrical devices for use in environments with combustible dust. General Requirements
• EN 61241-1 : 2004 ; Electrical devices for use in environments with combustible dust. Protection with “tD” enclosures
• EN 61241-4: 2006; Electrical devices for use in environments with combustible dust. Protection type “pD”
• EN 61241-11 : 2006 ; Electrical devices for use in environments with combustible dust. Protection with intrinsic safety "iD"
• EN 61241-17:2005; Electrical devices for use in environments with combustible dust. Inspection and maintenance of electrical installations in hazardous areas (except mines)
• EN 61241-2-2: 1996; Electrical devices for use in environments with combustible dust. Test methods. Method for determining the electrical resistance of dust in layers
• EN 61242 : 1997+A2 : 2016 ; Electrical accessories. Cable reels for household and similar purposes.
• EN 61243-1: 1998; Live work. voltage detectors. Capacitive type to be used for voltages exceeding 1 kV ac
• EN 61243-1 : 2005+A1 : 2010 ; Live work. voltage detectors. Capacitive type to be used for voltages exceeding 1 kV ac
• EN 61243-2: 1998; Live work. voltage detectors. Resistive type to be used for 1 kV to 36 kV ac voltages
• EN 61243-3: 1999; Live work. voltage detectors. Bipolar low voltage type
• EN 61243-3: 2010; Live work. voltage detectors. Bipolar low voltage type
• EN 61243-3: 2014; Live work. voltage detectors. Bipolar low voltage type
• EN 61248-1: 1997; Transformers and inductors for use in electronic and telecommunications equipment. General specification
• EN 61248-2: 1997; Transformers and inductors for use in electronic and telecommunications equipment. Section specifications for signal transformers based on the capacity approval procedure

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.