EN European Norm Tests Part 29

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 1606: 1997; Thermal insulation products for building applications. Determination of compressive creep.
• EN 1606: 2013; Thermal insulation products for building applications. Determination of compressive creep.
• EN 1607: 1997; Thermal insulation products for building applications. Determination of the tensile strength perpendicular to the faces.
• EN 1607: 2013; Thermal insulation products for building applications. Determination of the tensile strength perpendicular to the faces.
• EN 1608: 1997; Thermal insulation products for building applications. Determination of tensile strength parallel to surfaces.
• EN 1608: 2013; Thermal insulation products for building applications. Determination of tensile strength parallel to surfaces.
• EN 1609: 1997; Thermal insulation products for building applications. Determination of dimensional short-term water absorption by partial immersion.
• EN 1609: 2013; Thermal insulation products for building applications. Determination of short-term water absorption by partial immersion.
• EN 1610: 1998; Sewer and sewer construction and testing.
• EN 1610: 2015; Sewer and sewer construction and testing.
• EN 1611-1 : 2000 ; Timber. Appearance classification of softwoods. European spruces, firs, pines and Douglas firs
• EN 1612-1 : 1997+A1 : 2008 ; Plastic and rubber machinery. Reaction molding machines. Safety requirements for measuring and mixing units
• EN 1612-2 : 2000+A1 : 2008 ; Plastic and rubber machinery. Reaction molding machines. Safety requirements for a reaction molding plant
• EN 1614 : 2006 ; Health informatics. Representation of proprietary species in laboratory medicine.
• EN 1617: 1997; Disposable sterile drainage catheters and accessory devices.
• EN 1618: 1997; Catheters other than intravenous catheters. Test methods for common properties.
• EN 1619: 1997; Biotechnology. Large-scale process and production. General requirements for management and organization for strain relief procedures.
• EN 1620: 1997; Biotechnology. Large-scale process and production. Facility construction according to the degree of danger.
• EN 1621-1: 1998; Protective clothing of motorcyclists against mechanical impacts. Requirements and test methods for impact protectors
• EN 1621-1 : 2012 ; Protective clothing of motorcyclists against mechanical impacts. Motorcyclists limb joint impact protectors. Requirements and test methods
• EN 1621-2: 2014; Protective clothing of motorcyclists against mechanical impacts. Back protectors for motorcyclists. Requirements and test methods
• EN 1621-4 : 2013 ; Protective clothing of motorcyclists against mechanical impacts. Inflatable protectors for motorcyclists. Requirements and test methods
• EN 1622: 1998; Water analysis. Determination of threshold odor number (TON) and threshold flavor number (TFN).
• EN 1622 : 2006 ; water quality. Determination of threshold odor number (TON) and threshold flavor number (TFN).
• EN 1624 : 1999 ; Textiles and textile products. Combustion behavior of industrial and technical textiles. Procedure for determining the flame spread of vertically oriented samples.
• EN 1625: 1999; Textiles and textile products. Combustion behavior of industrial and technical textiles. The procedure for determining the flammability of vertically oriented samples.
• EN 1626 : 1999 ; Cryogenic vessels. Valves for cryogenic service.
• EN 1626 : 2008 ; Cryogenic vessels. Valves for cryogenic service.
• EN 1627 : 2011 ; Pedestrian door sets, windows, curtain walls, grilles and shutters. Burglar resistance. Requirements and classification.
• EN 1628 : 2011+A1 : 2015 ; Pedestrian door sets, windows, curtain walls, grilles and shutters. Burglar resistance. Test method for determining resistance under static loading.
• EN 1629 : 2011+A1 : 2015 ; Pedestrian door sets, windows, curtain walls, grilles and shutters. Burglar resistance. Test method for determining resistance under dynamic loading.
• EN 1630 : 2011+A1 : 2015 ; Pedestrian door sets, windows, curtain walls, grilles and shutters. Burglar resistance. Test method for determining resistance to manual theft attempts.
• EN 1634-1 : 2000 ; Fire resistance tests for door and shutter assemblies. Fire doors and shutters
• EN 1634-1 : 2008 ; Fire resistance and smoke control tests for door, shutter and swing window assemblies and building hardware elements. Fire resistance tests for doors, shutters and openable windows
• EN 1634-1: 2014; Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware. Fire resistance testing for door and shutter assemblies and openable windows
• EN 1634-2 : 2008 ; Fire resistance and smoke control tests for door, shutter and swing window assemblies and building hardware elements. Fire resistance characterization test for elements of building equipment
• EN 1634-3: 2004; Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware. Smoke control test for door and shutter assemblies
• EN 1635: 1998; Barcoding. Test features. Barcode symbols.
• EN 1637 : 1999 ; Lightweight conveyor belts. Test methods for the measurement of electrical resistances.
• EN 1638: 1997; Plastic piping systems. Glass reinforced thermoset plastic (GRP) pipes. Test method for the effects of cyclic internal pressure.
• EN 1639: 1997; dentistry Medical devices for dentistry. instruments.
• EN 1639: 2009; dentistry Medical devices for dentistry. instruments.
• EN 1640: 1997; dentistry Medical devices for dentistry. Equipment.
• EN 1640: 2009; dentistry Medical devices for dentistry. Equipment.
• EN 1641: 1997; dentistry Medical devices for dentistry. Materials.
• EN 1641: 2009; dentistry Medical devices for dentistry. Materials.
• EN 1642: 1997; dentistry Medical devices for dentistry. Dental implants.
• EN 1642: 2009; dentistry Medical devices for dentistry. Dental implants.
• EN 1642: 2011; dentistry Medical devices for dentistry. Dental implants.
• EN 1643: 2000; Valve verification systems for gas burners and automatic shut-off valves for gas appliances.
• EN 1643: 2014; Safety and control devices for gas burners and gas appliances. Valve proving systems for automatic shut-off valves.
• EN 1644-2: 2000; Test methods for non-woven compresses for medical use. Finished compresses
• EN 1645-1: 1999; Accommodation tools. Caravans. Health and safety residency requirements
• EN 1645-1 : 2004+A1 : 2008 ; Accommodation tools. Caravans. Health and safety residency requirements
• EN 1645-1: 2012; Accommodation tools. Caravans. Health and safety residency requirements
• EN 1645-2: 1999; Accommodation tools. Caravans. User loads
• EN 1645-2: 2008; Accommodation tools. Caravans. User load
• EN 1646-1 : 1999 ; Accommodation tools. Motor caravans. Health and safety residency requirements
• EN 1646-1 : 2004+A1 : 2008 ; Accommodation tools. Motor caravans. Health and safety residency requirements
• EN 1646-1 : 2012 ; Accommodation tools. Motor caravans. Health and safety residency requirements
• EN 1646-2: 1999; Accommodation tools. Motor caravans. User loads
• EN 1646-2: 2008; Accommodation tools. Motor caravans. User load
• EN 1647 : 1999 ; Accommodation tools. Caravan holiday homes. Health and safety residency requirements.
• EN 1647 : 2004+A1 : 2008 ; Accommodation tools. Caravan holiday homes. Health and safety residency requirements.
• EN 1647 : 2012 ; Accommodation tools. Caravan holiday homes. Health and safety residency requirements.
• EN 1648-1: 1998; Accommodation tools. 12 V direct current extra low voltage electrical installations. caravans
• EN 1648-1: 2004; Accommodation tools. 12 V direct current extra low voltage electrical installations. caravans
• EN 1648-1: 2012; Accommodation tools. 12 V direct current extra low voltage electrical installations. caravans
• EN 1648-2: 1998; Accommodation tools. 12 V direct current extra low voltage electrical installations. motorhomes
• EN 1648-2: 2005; Accommodation tools. 12 V direct current extra low voltage electrical installations. motorhomes
• EN 1648-2: 2012; Accommodation tools. 12 V direct current extra low voltage electrical installations. motorhomes
• EN 1650: 1998; Chemical disinfectants and antiseptics. Quantitative suspension testing for the evaluation of the fungicidal efficacy of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas. Test method and requirements (stage 2, step 1).
• EN 1650 : 2008+A1 : 2013 ; Chemical disinfectants and antiseptics. Quantitative suspension testing for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas. Test method and requirements (stage 2, step 1).
• EN 1651 : 1999 ; Paragliding equipment. harness Safety requirements and strength tests.
• EN 1652: 1998; Copper and copper alloys. General purpose sheet, plate, strip and circles.
• EN 1653: 1998; Copper and copper alloys. Plates, plates and circles for boilers, pressure vessels and hot water storage units.
• EN 1654: 1998; Copper and copper alloys. Ribbon for springs and connectors.
• EN 1655: 1997; Copper and copper alloys. Declarations of conformity.
• EN 1656: 2000; Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants used in the veterinary field. Test method and requirements (phase 2/step 1).
• EN 1656: 2009; Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary field. Test method and requirements (stage 2, step 1).
• EN 1657:2000; Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of fungicidal efficacy of chemical disinfectants and antiseptics used in the veterinary field. Test method and requirements (phase 2/step 1).
• EN 1657 : 2005 ; Chemical disinfectants and antiseptics. Quantitative suspension testing for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary field. Test method and requirements (stage 2, step 1).
• EN 1657 : 2016 ; Chemical disinfectants and antiseptics. Quantitative suspension testing for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary field. Test method and requirements (stage 2, step 1).
• EN 1658: 1997; Requirements for marking in vitro diagnostic instruments.
• EN 1659: 1997; In vitro diagnostic systems. Culture medium for microbiology. Terms and definitions.
• EN 1663: 1998; Dominant torque type hex nuts with flange (non-metal end).
• EN 1664: 1998; All-metal hex nuts with flange, current torque type.
• EN 1666: 1998; Torque type hex nuts available with flange (non-metallic end) with metric fine thread.
• EN 1667: 1998; All-metal hex nuts with metric fine pitch thread flange, current torque type.
• EN 1668: 1997; Welding consumables. Rods, wires and deposits for tungsten inert gas welding of unalloyed and fine grain steels. classification
• EN 1669: 1997; Aluminum and aluminum alloys. Test methods. Ear test for sheet and strip.
• EN 1670: 1998; Building equipment. corrosion resistance. Requirements and test methods.
• EN 1670: 2007; Building equipment. corrosion resistance. Requirements and test methods.
• EN 1671: 1997; Pressure sewer systems outside buildings.
• EN 1672-1: 2014; Food processing machinery. Basic concepts. Security requirements
• EN 1672-2: 1997; Food processing machinery. Basic concepts. hygiene requirements
• EN 1672-2 : 2005+A1 : 2009 ; Food processing machinery. Basic concepts. hygiene requirements
• EN 1674 : 2015 ; Food processing machinery. Dough rolling machines. Safety and hygiene requirements.
• EN 1676: 1997; Aluminum and aluminum alloys. Alloy ingots for remelting. Features
• EN 1676: 2010; Aluminum and aluminum alloys. Alloy ingots for remelting. Features

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.