EN European Norm Tests Part 148

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 61285 : 1995 ; Industrial process control. Security of analyzer homes.
• EN 61285 : 2004 ; Industrial process control. Security of analyzer homes.
• EN 61285 : 2015 ; Industrial process control. Security of analyzer homes.
• EN 61286: 1996; Information Technology. Coded graphic character set for use in the preparation of documents and information exchange used in electrotechnology.
• EN 61287-1: 2006; Railway applications. Power converters installed on ship's wagons. Features and test methods
• EN 61287-1: 2014; Railway applications. Power converters installed on ship's wagons. Features and test methods
• EN 61290-1: 2015; Optical amplifiers. Test methods. Power and gain parameters
• EN 61290-3: 2008; Optical amplifiers. Test methods. Noise figure parameters
• EN 61290-1-1: 2006; Optical amplifiers. Test methods. Power and gain parameters
• EN 61290-1-1 : 2015 ; Optical amplifiers. Test methods. Power and gain parameters. Optical spectrum analyzer method
• EN 61290-1-2: 1998; Optical fiber amplifiers. Basic features. Test methods for gain parameters. Electrical spectrum analyzer
• EN 61290-1-2: 2005; Optical amplifiers. Test methods. Power and gain parameters
• EN 61290-1-3: 1998; Optical fiber amplifiers. Basic spectrum analyzers. optical power meter
• EN 61290-1-3: 2005; Optical amplifiers. Test methods. Power and gain parameters. Optical power meter method
• EN 61290-1-3: 2015; Optical amplifiers. Test methods. Power and gain parameters. Optical power meter method
• EN 61290-2-1: 1998; Optical fiber amplifiers. Basic features. Test methods for optical power parameters. optical spectrum analyzer
• EN 61290-2-2: 1998; Optical fiber amplifiers. Basic features. Test methods for optical power parameters. Electrical spectrum analyzer
• EN 61290-2-3: 1998; Optical fiber amplifiers. Basic features. Test methods for optical power parameters. optical power meter
• EN 61290-3-2: 2008; Optical amplifiers. Test methods. Noise figure parameters. Electrical spectrum analyzer method
• EN 61290-3-3: 2014; Optical amplifiers. Test methods. Noise figure parameters. Ratio of signal strength to total ASE power
• EN 61290-4-1: 2011; Optical amplifiers. Test methods. Gain temporary parameters. Two wavelength method
• EN 61290-4-2: 2011; Optical amplifiers. Test methods. Gain temporary parameters. Broadband welding method
• EN 61290-4-3 : 2015 ; Optical amplifiers. Test methods. Power transient parameters. Single channel optical amplifiers in output power control
• EN 61290-5-1: 2006; Optical amplifiers. Test methods. Reflection parameters. Optical spectrum analyzer method
• EN 61290-6-1: 1998; Optical fiber amplifiers. Basic features. Test methods for pump leakage parameters. optical multiplexer
• EN 61290-7-1: 1998; Optical fiber amplifiers. Basic features. Test methods for out-of-band insertion losses. Filtered optical power meter
• EN 61290-7-1 : 2007 ; Optical amplifiers. Test methods. Out-of-band insertion losses. Filtered optical power meter method
• EN 61290-10-1 : 2009 ; Optical amplifiers. Test methods. Multi-channel parameters. Pulse method using optical switch and optical spectrum analyzer
• EN 61290-10-2: 2008; Optical amplifiers. Test methods. Multi-channel parameters. Pulse method using a gated optical spectrum analyzer
• EN 61290-10-4: 2007; Optical amplifiers. Test methods. Multi-channel parameters. Interpolated source extraction method using an optical spectrum analyzer
• EN 61290-10-5: 2014; Optical amplifiers. Test methods. Multi-channel parameters. Distributed Raman amplifier gain and noise figure
• EN 61290-11-1 : 2008 ; Optical amplifiers. Test methods. Polarization mode distribution parameter. Jones matrix self-analysis (JME)
• EN 61290-11-2: 2005; Optical amplifiers. Test methods. Polarization mode distribution parameter
• EN 61291-1: 1998; Optical fiber amplifiers. General specification
• EN 61291-1 : 2006 ; Optical amplifiers. General specification
• EN 61291-1 : 2012 ; Optical amplifiers. General specification
• EN 61291-2: 2001; Optical fiber amplifiers. Digital applications. Performance specification template
• EN 61291-2: 2007; Optical amplifiers. Digital applications. Performance specification template
• EN 61291-2: 2012; Optical amplifiers. Digital applications. Performance specification template
• EN 61291-2: 2016; Optical amplifiers. Single channel applications. Performance specification template
• EN 61291-4: 2008; Optical amplifiers. Multi-channel applications. Performance specification template
• EN 61291-4: 2012; Optical amplifiers. Multi-channel applications. Performance specification template
• EN 61291-6-1 : 2008 ; Optical amplifiers. Interfaces. instruction set
• EN 61293 : 1995 ; Marking of electrical equipment with ratings on electrical supply. Security requirements.
• EN 61297: 1996; Industrial process control systems. Classification of adaptive controllers for evaluation purposes.
• EN 61298-1: 1996; Process measurement and control devices. General methods and procedures for evaluating performance. General Evaluations
• EN 61298-1: 2008; Process measurement and control devices. General methods and procedures for evaluating performance. General Evaluations
• EN 61298-2: 1996; Process measurement and control devices. General methods and procedures for evaluating performance. Tests under reference conditions
• EN 61298-2: 2008; Process measurement and control devices. General methods and procedures for evaluating performance. Tests under reference conditions
• EN 61298-3: 1998; Process measurement and control devices. General methods and procedures for evaluating performance. Tests for the effects of potency amounts
• EN 61298-3: 2008; Process measurement and control devices. General methods and procedures for evaluating performance. Tests for the effects of potency amounts
• EN 61298-4: 1996; Process measurement and control devices. General methods and procedures for evaluating performance. Evaluation report content
• EN 61298-4: 2008; Process measurement and control devices. General methods and procedures for evaluating performance. Evaluation report content
• EN 61300-1: 1997; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. General and guidance
• EN 61300-1: 2011; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. General and guidance
• EN 61300-1: 2016; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. General and guidance
• EN 61300-2-1: 1997; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. Vibration (sinusoidal)
• EN 61300-2-1: 2009; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. Vibration (sinusoidal)
• EN 61300-2-2: 1997; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. mating endurance
• EN 61300-2-2: 2008; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. mating endurance
• EN 61300-2-3: 1997; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. tests. Static shear load
• EN 61300-2-4: 1997; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. fiber/cable holding
• EN 61300-2-5: 1997; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. tests. torsion/twist
• EN 61300-2-5: 2011; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. torsion
• EN 61300-2-6: 1997; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. Tensile strength of coupling mechanism
• EN 61300-2-6: 2011; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. Tensile strength of coupling mechanism
• EN 61300-2-7: 1997; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. bending moment
• EN 61300-2-7: 2013; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. bending moment
• EN 61300-2-8: 1997; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. Bump
• EN 61300-2-9: 1997; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. Shock
• EN 61300-2-9: 2010; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. Shock
• EN 61300-2-10: 1997; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. crush resistance
• EN 61300-2-10: 2012; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. crush resistance
• EN 61300-2-11: 1997; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. axial compression
• EN 61300-2-11: 2013; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. axial compression
• EN 61300-2-12 : 1997 ; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. Coup
• EN 61300-2-12 : 2005 ; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. Coup
• EN 61300-2-12 : 2009 ; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. Coup
• EN 61300-2-13 : 1997 ; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. Acceleration
• EN 61300-2-14 : 1997 ; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. Maximum input power
• EN 61300-2-14 : 2006 ; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. Optical power handling and damage threshold characterization
• EN 61300-2-14 : 2013 ; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. high optical power
• EN 61300-2-15 : 1997 ; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. Torque force of coupling mechanisms
• EN 61300-2-15 : 2008 ; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. Torque force of coupling mechanism
• EN 61300-2-16 : 1997 ; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. mold growth
• EN 61300-2-16 : 2006 ; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests
• EN 61300-2-17 : 1997 ; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. tests. Cold
• EN 61300-2-17: 2011; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. Cold
• EN 61300-2-18 : 1997 ; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. Dry hot. high temperature resistance
• EN 61300-2-18 : 2005 ; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. Dry hot. high temperature resistance
• EN 61300-2-19: 1997; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. moist heat (steady state)
• EN 61300-2-19 : 2005 ; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests
• EN 61300-2-19: 2013; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. moist heat (steady state)
• EN 61300-2-20: 1997; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. climate order
• EN 61300-2-21: 1997; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. Composite temperature-humidity cyclic test
• EN 61300-2-21 : 2010 ; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. Compound temperature/humidity cyclic testing
• EN 61300-2-22: 1997; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. Temperature change
• EN 61300-2-22: 2007; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. Temperature change
• EN 61300-2-23: 1997; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. Sealing for pressureless covers of fiber optic devices
• EN 61300-2-23: 2011; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. tests. Sealing for pressureless covers of fiber optic devices

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.