EN European Norm Tests Part 82

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 14278-1 : 2004 ; Textile. Determination of cotton fiber stickiness. Method using a manual thermodetection device
• EN 14279 : 2004+A1 : 2009 ; Laminated veneer lumber (LVL). Definitions, classification and properties.
• EN 14286 : 2007 ; Aluminum and aluminum alloys. Weldable rolled products for tanks for storage and transport of dangerous goods.
• EN 14286 : 2008 ; Aluminum and aluminum alloys. Weldable rolled products for tanks for storage and transport of dangerous goods.
• EN 14292 : 2005 ; Adhesives. Wood adhesives. Determination of static load resistance with increasing temperature.
• EN 14293: 2006; Adhesives. Adhesives for bonding the parquet to the subfloor. Test methods and minimum requirements.
• EN 14294: 2010; Adhesives for leather and shoe materials. Preparation of test pieces bonded by molding processes.
• EN 14296 : 2005 ; Sanitary appliances. Shared wash basins.
• EN 14298: 2004; Timber. Evaluation of drying quality.
• EN 14303 : 2009+A1 : 2013 ; Thermal insulation products for building equipment and industrial facilities. Factory made mineral wool (MW) products. Specification.
• EN 14303: 2015; Thermal insulation products for building equipment and industrial facilities. Factory made mineral wool (MW) products. Specification.
• EN 14304 : 2009+A1 : 2013 ; Thermal insulation products for building equipment and industrial facilities. Factory made flexible elastomeric foam (FEF) products. Specification.
• EN 14304 : 2015 ; Thermal insulation products for building equipment and industrial facilities. Factory made flexible elastomeric foam (FEF) products. Specification.
• EN 14305 : 2009+A1 : 2013 ; Thermal insulation products for building equipment and industrial facilities. Factory made cellular glass (CG) products. Specification.
• EN 14305: 2015; Thermal insulation products for building equipment and industrial facilities. Factory made cellular glass (CG) products. Specification.
• EN 14306 : 2009+A1 : 2013 ; Thermal insulation products for building equipment and industrial facilities. Factory made calcium silicate (CS) products. Specification.
• EN 14306: 2015; Thermal insulation products for building equipment and industrial facilities. Factory made calcium silicate (CS) products. Specification.
• EN 14307 : 2009+A1 : 2013 ; Thermal insulation products for building equipment and industrial facilities. Factory made extruded polystyrene foam (XPS) products. Specification.
• EN 14307: 2015; Thermal insulation products for building equipment and industrial facilities. Factory made extruded polystyrene foam (XPS) products. Specification.
• EN 14308 : 2009+A1 : 2013 ; Thermal insulation products for building equipment and industrial facilities. Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products. Specification.
• EN 14308: 2015; Thermal insulation products for building equipment and industrial facilities. Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products. Specification.
• EN 14309 : 2009+A1 : 2013 ; Thermal insulation products for building equipment and industrial facilities. Factory made products from expanded polystyrene (EPS). Specification.
• EN 14309: 2015; Thermal insulation products for building equipment and industrial facilities. Factory made products from expanded polystyrene (EPS). Specification.
• EN 14313 : 2009+A1 : 2013 ; Thermal insulation products for building equipment and industrial facilities. Factory made polyethylene foam (PEF) products. Specification.
• EN 14313: 2015; Thermal insulation products for building equipment and industrial facilities. Factory made polyethylene foam (PEF) products. Specification.
• EN 14314 : 2009+A1 : 2013 ; Thermal insulation products for building equipment and industrial facilities. Factory made phenolic foam (PF) products. Specification.
• EN 14314 : 2015 ; Thermal insulation products for building equipment and industrial facilities. Factory made phenolic foam (PF) products. Specification.
• EN 14315-1: 2013; Thermal insulation products for buildings. In-situ sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products. Specifications for rigid foam spray system prior to installation
• EN 14315-2: 2013; Thermal insulation products for buildings. In-situ sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products. Specifications for installed insulation products
• EN 14316-2: 2007; Thermal insulation products for buildings. In-situ thermal insulation consisting of expanded perlite (EP) products. Features for installed products
• EN 14317-2: 2007; Thermal insulation products for buildings. In-situ thermal insulation created from exfoliated vermiculite (EV) products. Features for installed products
• EN 14318-1: 2013; Thermal insulation products for buildings. In-situ dispersed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products. Specifications for rigid foam delivery system prior to installation
• EN 14318-2: 2013; Thermal insulation products for buildings. In-situ dispersed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products. Specifications for installed insulation products
• EN 14319-1 : 2013 ; Thermal insulation products for building equipment and industrial facilities. In-situ dispersed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products. Specifications for rigid foam delivery system prior to installation
• EN 14319-2: 2013; Thermal insulation products for building equipment and industrial facilities. In-situ dispersed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products. Specifications for installed insulation products
• EN 14320-1: 2013; Thermal insulation products for building equipment and industrial facilities. In-situ sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products. Specifications for rigid foam spray system prior to installation
• EN 14320-2: 2013; Thermal insulation products for building equipment and industrial facilities. In-situ sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products. Specifications for installed insulation products
• EN 14321-1:2005; Glass in the building. Thermally toughened alkaline earth silicate safety glass. Definition and explanation
• EN 14321-2: 2005; Glass in the building. Thermally toughened alkaline earth silicate safety glass. Conformity assessment/Product standard
• EN 14328 : 2005 ; Protective clothing. Gloves and sleeves that protect against cuts by electric knives. Requirements and test methods.
• EN 14334 : 2005 ; Inspection and testing of LPG road tankers.
• EN 14334: 2014; LPG equipment and accessories. Inspection and testing of LPG road tankers.
• EN 14336: 2004; Heating systems in buildings. Installation and commissioning of water-based heating systems.
• EN 14337 : 2005 ; Heating systems in buildings. Design and installation of direct electric room heating systems.
• EN 14342 : 2005+A1 : 2008 ; Wooden flooring. Specifications, conformity assessment and marking.
• EN 14342 : 2013 ; Wooden flooring and parquet. Specifications, conformity assessment and marking.
• EN 14343 : 2005 ; Rotary positive displacement pumps. Performance tests for acceptance.
• EN 14346: 2006; Characterization of waste. Calculation of dry matter by determining the dry residue or water content.
• EN 14347: 2005; Chemical disinfectants and antiseptics. Basic sporicidal activity. Test method and requirements (stage 1, step 1).
• EN 14348 : 2005 ; Chemical disinfectants and antiseptics. Quantitative suspension testing for the evaluation of mycobactericidal efficacy of chemical disinfectants in the medical field, including instrument disinfectants. Test methods and requirements (stage 2, step 1).
• EN 14349 : 2007 ; Chemical disinfectants and antiseptics. Quantitative surface testing for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary field on non-porous surfaces without mechanical action. Test method and requirements (stage 2, step 2).
• EN 14349 : 2012 ; Chemical disinfectants and antiseptics. Quantitative surface testing for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary field on non-porous surfaces without mechanical action. Test method and requirements (stage 2, step 2).
• EN 14351-1 : 2006+A2 : 2016 ; Windows and doors. Product standard, performance characteristics. Windows and exterior pedestrian doors
• EN 14353 : 2007+A1 : 2010 ; Metal beads and feature profiles for use with drywall. Definitions, requirements and test methods.
• EN 14354: 2004; Wood based panels. Wood veneer flooring.
• EN 14358 : 2006 ; wooden structures. Calculation of characteristic 5 percentiles and acceptance criteria for a sample.
• EN 14358: 2016; wooden structures. Calculation and verification of characteristic values.
• EN 14359 : 2006+A1 : 2010 ; Gas-charged accumulators for fluid power applications.
• EN 14362-1: 2012; Textile. Methods for the determination of certain aromatic amines derived from azo colorants. Detection of the use of certain azo colorants that can be accessed by removing and not removing the fibers
• EN 14362-3: 2012; Textile. Methods for the determination of certain aromatic amines derived from azo colorants. Detection of the use of certain azo colorants capable of releasing 4-aminoazobenzene
• EN 14363 : 2005 ; Railway applications. Tests for acceptance of rolling stock operating characteristics. Testing running behavior and stationary tests.
• EN 14363: 2016; Railway applications. Test and Simulation for acceptance of rolling stock operating characteristics. Employee Behavior and stationary tests.
• EN 14364 : 2006+A1 : 2008 ; Plastic piping systems for pressure or non-pressure drainage and sewerage. Glass reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Specifications for pipes, fittings and joints.
• EN 14364: 2013; Plastic piping systems for pressure or non-pressure drainage and sewerage. Glass reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Specifications for pipes, fittings and joints.
• EN 14367 : 2005 ; Uncontrollable backflow preventer with different pressure zones. Family C, type A.
• EN 14368: 2015; Products used in the treatment of water intended for human consumption. Limestone coated with manganese dioxide.
• EN 14369: 2015; Products used in the treatment of water intended for human consumption. Iron coated granular activated alumina.
• EN 14375: 2003; Child resistant, non-resealable packaging for pharmaceutical products. Requirements and tests.
• EN 14375: 2016; Child resistant, non-resealable packaging for pharmaceutical products. Requirements and tests.
• EN 14382 : 2005+A1 : 2009 ; Safety devices for gas pressure regulation stations and installations. Gas safety shut-off devices for inlet pressures up to 100 bar.
• EN 14383-1 : 2006 ; Prevention of crime. Urban planning and building design. Definition of specific terms
• EN 14388 : 2005 ; Devices that reduce road traffic noise. Features
• EN 14388 : 2015 ; Devices that reduce road traffic noise. Features
• EN 14389-1 : 2007 ; Devices that reduce road traffic noise. Long-term performance evaluation procedures. acoustic properties
• EN 14389-1 : 2015 ; Devices that reduce road traffic noise. Long-term performance evaluation procedures. acoustic properties
• EN 14389-2: 2015; Devices that reduce road traffic noise. Long-term performance evaluation procedures. non-acoustic properties
• EN 14390: 2007; Fire test. Large-scale room reference testing for surface products.
• EN 14391 : 2004 ; Packaging. Collapsible aluminum tubes. Tactile hazard alerts.
• EN 14392 : 2007 ; Aluminum and aluminum alloys. Requirements for anodized products for use in contact with foodstuffs.
• EN 14394 : 2005+A1 : 2008 ; Heating boilers. Heating boilers with forced burners. The rated heat output does not exceed 10 MW and the maximum operating temperature is 110°C.
• EN 14397-1 : 2010 ; Fertilizers and liming materials. Carbon dioxide determination. Method for solid fertilizers
• EN 14399-1 : 2005 ; High strength structural bolting assemblies for preload. General Requirements
• EN 14399-1 : 2015 ; High strength structural bolting assemblies for preload. General Requirements
• EN 14399-2 : 2005 ; High strength structural bolting assemblies for preload. Suitability test for preload
• EN 14399-2 : 2015 ; High strength structural bolting assemblies for preload. Suitability for preload
• EN 14399-3 : 2005 ; High strength structural bolting for preload. System HR. Hex bolt and nut groups
• EN 14399-3 : 2015 ; High strength structural bolting assemblies for preload. System HR. Hex bolt and nut groups
• EN 14399-4: 2005; High strength structural bolting assemblies for preload. System HV. Hex bolt and nut groups
• EN 14399-4 : 2015 ; High strength structural bolting assemblies for preload. System HV. Hex bolt and nut groups
• EN 14399-5: 2005; High strength structural bolting assemblies for preload. flat washers
• EN 14399-5: 2015; High strength structural bolting assemblies for preload. flat washers
• EN 14399-6: 2005; High strength structural bolting assemblies for preload. flat bevel washers
• EN 14399-6: 2015; High strength structural bolting assemblies for preload. flat bevel washers
• EN 14399-7 : 2007 ; High strength structural bolting assemblies for preload. System HR. Countersunk bolt and nut groups
• EN 14399-8 : 2007 ; High strength structural bolting assemblies for preload. System HV. Hex bolt and nut assemblies
• EN 14399-9 : 2009 ; High strength structural bolting for preload. System HR or HV. Direct tension indicators for bolt and nut assemblies
• EN 14399-10: 2009; High strength structural bolting assemblies for preload. System HRC. Calibrated preload bolt and nut assemblies
• EN 14401: 2004; Hard plastic containers. Methods of testing the effectiveness of closings.
• EN 14407: 2014; water quality. Guidance for identification and enumeration of benthic diatom specimens from rivers and lakes.
• EN 14408-1: 2004; Plastic piping systems for regeneration of underground gas supply networks. general

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.