EN European Norm Tests Part 150

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 61300-3-38: 2012; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. Inspections and measurements. Group delay, chromatic dispersion and phase fluctuation
• EN 61300-3-39: 1998; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. Inspections and measurements. PC optical connector reference plug selection
• EN 61300-3-39: 2012; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. Inspections and measurements. Physical contact (PC) optical connector reference plug selection for return loss measurements
• EN 61300-3-40: 1998; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. Inspections and measurements. The extinction rate of the polarization retaining (pm) fiber braided connector
• EN 61300-3-42 : 2008 ; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. Inspections and measurements. Attenuation of single-mode alignment sleeves and/or adapters with flexible alignment sleeves
• EN 61300-3-43 : 2009 ; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. Inspections and measurements. Mode transfer function measurement for fiber optic sources
• EN 61300-3-45: 2011; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. Inspections and measurements. Attenuation of randomly matched multi-fiber connectors
• EN 61300-3-46: 2011; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. Measurement. Hole diameter for guide pin in MT ferrules
• EN 61300-3-47: 2014; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. Inspections and measurements. End face geometry of PC/APC spherically polished ferrules using interferometry
• EN 61300-3-48 : 2013 ; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. Inspections and measurements. Spring compression force of the connecting sleeve for multifibre connectors with rectangular ferrule
• EN 61300-3-49 : 2013 ; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. Inspections and measurements. Guide pin holding force for multi-fiber connectors with rectangular ferrule
• EN 61300-3-50: 2013; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. Inspections and measurements. Crosstalk for optical spatial switches
• EN 61300-3-51: 2014; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. Inspections and measurements. Pin gauge pulling force for rectangular ring multi-fiber connectors
• EN 61300-3-52: 2014; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. Inspections and measurements. Guide hole and alignment pin deformation constant, CD for PC rectangular ferrule with 8 degree angle, single mode fibers
• EN 61300-3-53 : 2015 ; Fiber optic interconnect devices and passive components. Basic testing and measurement procedures. Inspections and measurements. Circled angular flux (EAF) measurement method based on two-dimensional far-field data from multimode waveguide (including fiber) with step index
• EN 61302: 1996; Electrical insulating materials. A method of monitoring and assessing resistance to erosion. Swivel wheel immersion test.
• EN 61303: 1997; Medical electrical equipment. Radionuclide calibrators. Special methods to describe performance.
• EN 61305-1 : 1995 ; Home high quality audio equipment and systems. Methods of measuring and determining performance. general
• EN 61305-2: 1998; Home high quality audio equipment and systems. Methods of measuring and determining performance. FM radio receivers
• EN 61305-3: 1995; Home high quality audio equipment and systems. Methods of measuring and determining performance. amplifiers
• EN 61307: 2006; Industrial microwave heating installations. Test methods for determining power output.
• EN 61307: 2011; Industrial microwave heating installations. Test methods for determining power output.
• EN 61308: 2006; High frequency dielectric heating installations. Test methods for determining power output.
• EN 61309: 1995; Deep oil fryers for home use. Methods for measuring performance.
• EN 61310-1 : 1995 ; Machinery safety. Indication, marking and operation. Requirements for visual, auditory and tactile signals
• EN 61310-1 : 2008 ; Machinery safety. Indication, marking and operation. Requirements for visual, acoustic and tactile signals
• EN 61310-2: 1995; Machinery safety. Indication, marking and operation. Marking requirements
• EN 61310-2: 2008; Machinery safety. Indication, marking and operation. Marking requirements
• EN 61310-3: 1999; Machinery safety. Indication, marking and operation. Requirements for the location and operation of actuators
• EN 61310-3: 2008; Machinery safety. Indication, marking and operation. Requirements for the location and operation of actuators
• EN 61314-1 : 1997 ; Compatible quality assessment system for electronic components. Fiber optic fan outlets. General specification
• EN 61314-1 : 2005 ; Fiber optic fan outlets. General specification
• EN 61314-1 : 2009 ; Fiber optic interconnect devices and passive components. Fiber optic fan outlets. General specification
• EN 61314-1 : 2012 ; Fiber optic interconnect devices and passive components. Fiber optic fan outlets. General specification
• EN 61314-1-1: 2006; Fiber optic fan outlets. Empty detail property
• EN 61314-1-1: 2012; Fiber optic interconnect devices and passive components. Fiber optic fan outlets. Empty detail property
• EN 61318 : 2008 ; Live work. Conformity assessment applicable to tools, devices and equipment.
• EN 61319-1 : 1996 ; Interconnections of satellite receiver equipment. Europe
• EN 61325: 1996; Insulators for overhead lines with a rated voltage above 1000 V. Ceramic or glass insulator units for DC systems. Definitions, test methods and acceptance criteria.
• EN 61326-1 : 2006 ; Electrical equipment for measurement, control and laboratory use. EMC requirements. General Requirements
• EN 61326-1 : 2013 ; Electrical equipment for measurement, control and laboratory use. EMC requirements. General Requirements
• EN 61326-2-1 : 2006 ; Electrical equipment for measurement, control and laboratory use. EMC requirements. Special requirements. Test configurations, operating conditions and performance criteria for sensitive test and measurement equipment for applications without EMC protection
• EN 61326-2-1 : 2013 ; Electrical equipment for measurement, control and laboratory use. EMC requirements. Special requirements. Test configurations, operating conditions and performance criteria for sensitive test and measurement equipment for applications without EMC protection
• EN 61326-2-2: 2006; Electrical equipment for measurement, control and laboratory use. EMC requirements. Special requirements. Test configurations, operating conditions and performance criteria for portable test, measurement and monitoring equipment used in low voltage distribution systems
• EN 61326-2-2: 2013; Electrical equipment for measurement, control and laboratory use. EMC requirements. Special requirements. Test configurations, operating conditions and performance criteria for portable test, measurement and monitoring equipment used in low voltage distribution systems
• EN 61326-2-3: 2006; Electrical equipment for measurement, control and laboratory use. EMC requirements. special requirements
• EN 61326-2-3: 2013; Electrical equipment for measurement, control and laboratory use. EMC requirements. Special requirements. Test configuration, operating conditions and performance criteria for transducers with integrated or remote signal conditioning
• EN 61326-2-4: 2006; Electrical equipment for measurement, control and laboratory use. EMC requirements. special requirements
• EN 61326-2-4: 2013; Electrical equipment for measurement, control and laboratory use. EMC requirements. Special requirements. Test configurations, operating conditions and performance criteria for equipment for insulation monitoring devices per IEC 61557-8 and insulation fault location per IEC 61557-9
• EN 61326-2-5: 2006; Electrical equipment for measurement, control and laboratory use. EMC requirements. special requirements
• EN 61326-2-5: 2013; Electrical equipment for measurement, control and laboratory use. EMC requirements. Special requirements. Test configurations, operating conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1
• EN 61326-2-6 : 2006 ; Electrical equipment for measurement, control and laboratory use. EMC requirements. Special requirements. In vitro diagnostic (IVD) medical equipment
• EN 61326-2-6 : 2013 ; Electrical equipment for measurement, control and laboratory use. EMC requirements. Special requirements. In vitro diagnostic (IVD) medical equipment
• EN 61326-3-1 : 2008 ; Electrical equipment for measurement, control and laboratory use. EMC requirements. Immunity requirements for safety-related systems and equipment intended to perform safety-related functions (functional safety). General industrial applications
• EN 61326-3-2 : 2008 ; Electrical equipment for measurement, control and laboratory use. EMC requirements. Immunity requirements for safety-related systems and equipment intended to perform safety-related functions (functional safety). Industrial applications with specified electromagnetic environment
• EN 61326: 1998; Electrical equipment for measurement, control and laboratory use. EMC requirements.
• EN 61327: 1996; Helical-scan digital composite videocassette recording system using 12,65 mm (0,5 inch) magnetic tape. D-3 format;
• EN 61329: 1996; Sound system equipment. Methods of measuring and determining the performance of sounders (electroacoustic transducers for tone generation).
• EN 61330: 1996; High voltage/low voltage prefabricated substations.
• EN 61331-1: 2002; Protective devices against diagnostic medical X-radiation. Determination of attenuation properties of materials
• EN 61331-1: 2014; Protective devices against diagnostic medical X-radiation. Determination of attenuation properties of materials
• EN 61331-2: 2002; Protective devices against diagnostic medical X-radiation. Protective glass plates
• EN 61331-2: 2014; Protective devices against diagnostic medical X-radiation. Translucent protective plates
• EN 61331-3: 1999; Protective devices against diagnostic medical X-radiation. Protective clothing and protective devices for gonads
• EN 61331-3: 2014; Protective devices against diagnostic medical X-radiation. Protective clothing, goggles and protective patient shields
• EN 61334-6: 2001; Distribution automation using distribution line carrier systems. A-XDR coding rule
• EN 61334-3-21: 1997; Distribution automation using distribution line carrier systems. Network signaling requirements. MV phase-to-phase isolated capacitive coupling device
• EN 61334-4-1 : 1997 ; Distribution automation using distribution line carrier systems. Data communication protocols. Reference model of communication system
• EN 61334-4-32: 1997; Distribution automation using distribution line carrier systems. Data communication protocols. Data link layer. Logical link control (LLC)
• EN 61334-4-33: 1998; Distribution automation using distribution line carrier systems. Data communication protocols. Data link layer. connection oriented protocol
• EN 61334-4-41: 1998; Distribution automation using distribution line carrier systems. Data communication protocols. Application protocols. Distribution line message feature
• EN 61334-4-42: 1997; Distribution automation using distribution line carrier systems. Data communication protocols. Application protocols. application layer
• EN 61334-4-511: 2001; Distribution automation using distribution line carrier systems. Data communication protocols. System management. CIASE protocol
• EN 61334-4-61 : 1998 ; Distribution automation using distribution line carrier systems. Data communication protocols. network layer. Connectionless protocol
• EN 61337-1 : 2004 ; Filters using waveguide type dielectric resonators. General specification
• EN 61337-1-1: 1998; Filters using waveguide type dielectric resonators. General information, standard values ​​and test conditions. General information and standard values
• EN 61338-1 : 2005 ; Waveguide type dielectric resonators. General specification
• EN 61338-4: 2005; Waveguide type dielectric resonators. section properties
• EN 61338-1-3: 2000; Waveguide type dielectric resonators. General information and test conditions. Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency
• EN 61338-1-4: 2006; Waveguide type dielectric resonators. General information and test conditions. Measurement method of complex relative permittivity for dielectric resonator materials at millimeter wave frequency
• EN 61338-1-5 : 2015 ; Waveguide type dielectric resonators. General information and test conditions. Conductivity measurement method at the interface between conductive layer and dielectric substrate at microwave frequency
• EN 61338-4-1: 2005; Waveguide type dielectric resonators. Empty detail property
• EN 61340-2-3: 2000; Electrostatic.. Test methods for determining the resistance and resistivity of solid planar materials used to prevent electrostatic charge build-up
• EN 61340-3-1: 2007; Electrostatic. Methods for simulation of electrostatic effects. Human body model (HBM) electrostatic discharge test waveforms
• EN 61340-3-2: 2007; Electrostatic. Methods for simulation of electrostatic effects. Machine model (MM) electrostatic discharge test waveforms
• EN 61340-4-4: 2005; Electrostatic. Standard test methods for specific applications
• EN 61340-4-4 : 2012+A1 : 2015 ; Electrostatic. Standard test methods for specific applications. Electrostatic classification of flexible intermediate bulk containers (FIBC)
• EN 61340-4-6 : 2015 ; Electrostatic. Standard test methods for specific applications. bracelets
• EN 61340-4-8 : 2015 ; Electrostatic. Standard test methods for specific applications. Electrostatic discharge protection. Bags
• EN 61340-4-9: 2016; Electrostatic. Standard test methods for specific applications. clothes
• EN 61340-5-1 : 2001 ; Electrostatic. Protection of electronic devices from electrostatic events. General Requirements
• EN 61340-5-1 : 2007 ; Electrostatic. Protection of electronic devices from electrostatic events. General Requirements
• EN 61340-5-1 : 2016 ; Electrostatic. Protection of electronic devices from electrostatic events. General Requirements
• EN 61340-5-2: 2001; Electrostatic. Protection of electronic devices from electrostatic events. user guide
• EN 61340-5-3: 2010; Electrostatic. Protection of electronic devices from electrostatic events. Specifications and classifications of requirements for packaging for devices sensitive to electrostatic discharge
• EN 61340-5-3 : 2015 ; Electrostatic. Protection of electronic devices from electrostatic events. Classification of properties and requirements for packaging for devices sensitive to electrostatic discharge
• EN 61341: 2011; Method of measuring center beam intensity and beam angle(s) of reflector lamps.
• EN 61346-1: 1996; Industrial systems, plants and equipment and industrial products. Configuration principles and reference notations. ground rules
• EN 61346-2: 2001; Industrial systems, plants and equipment and industrial products. Configuration principles and reference notations. Classification of objects and codes for classes
• EN 61347-1 : 2001+A1 : 2008 ; Lamp control assembly. General and safety requirements

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.