EN European Norm Tests Part 57

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 10207: 1992; Steels for simple pressure vessels. Technical delivery requirements for plates, strips and bars.
• EN 10207: 2005; Steels for simple pressure vessels. Technical delivery requirements for plates, strips and bars.
• EN 10208-1: 1998; Steel pipes for pipelines for flammable liquids. Technical delivery conditions. Class A requirement pipes
• EN 10208-1: 2009; Steel pipes for pipelines for flammable liquids. Technical delivery conditions. Class A requirement pipes
• EN 10208-2: 1997; Steel pipes for pipelines for flammable liquids. Technical delivery conditions. Class B requirement pipes
• EN 10208-2: 2009; Steel pipes for pipelines for flammable liquids. Technical delivery conditions. Class B requirement pipes
• EN 10209: 1996; Cold rolled low carbon steel flat products for vitreous enamel. Technical delivery conditions.
• EN 10209: 2013; Cold rolled low carbon steel flat products for vitreous enamel. Technical delivery conditions.
• EN 10210-1 : 1994 ; Hot-worked structural hollow sections of non-alloy and fine grain structural steels. Technical delivery requirements
• EN 10210-1: 2006; Hot worked structural hollow sections of non-alloy and fine grain steels. Technical delivery requirements
• EN 10210-2: 1997; Hot-worked structural hollow sections of non-alloy and fine grain structural steels. Tolerances, dimensions and section properties
• EN 10210-2: 2006; Hot worked structural hollow sections of non-alloy and fine grain steels. Tolerances, dimensions and section properties
• EN 10211: 1996; Chemical analysis of ferrous materials. Determination of titanium in steel and iron. Flame atomic absorption spectrometric method.
• EN 10211: 2013; Chemical analysis of ferrous materials. Determination of titanium in steels and cast irons. Flame atomic absorption spectrometric method.
• EN 10212: 1996; Chemical analysis of ferrous materials. Determination of arsenic in steel and iron. Spectrophotometric method.
• EN 10213-1: 1996; Technical delivery conditions for pressure steel castings. general
• EN 10213-2: 1996; Technical delivery conditions for pressure steel castings. Steel grades for use at room temperature and high temperature
• EN 10213-3: 1996; Technical delivery conditions for pressure steel castings. Steels for use at low temperatures
• EN 10213-4: 1996; Technical delivery conditions for pressure steel castings. Austenitic and austenitic-ferritic steel grades
• EN 10213 : 2007+A1 : 2016 ; Pressure steel castings.
• EN 10214: 1995; Continuous hot-dip zinc-aluminum (ZA) coated steel strip and sheet. Technical delivery conditions.
• EN 10215: 1995; Continuous hot-dip aluminum-zinc (AZ) coated steel strip and sheet. Technical delivery conditions.
• EN 10216-1: 2013; Seamless steel pipes for pressure purposes. Technical delivery conditions. Non-alloy steel pipes with specified room temperature properties
• EN 10216-2: 2013; Seamless steel pipes for pressure purposes. Technical delivery conditions. Non-alloy and alloy steel pipes with specified high-temperature properties
• EN 10216-3: 2013; Seamless steel pipes for pressure purposes. Technical delivery conditions. Alloy fine grain steel pipes
• EN 10216-4: 2013; Seamless steel pipes for pressure purposes. Technical delivery conditions. Non-alloy and alloy steel pipes with specified low-temperature properties
• EN 10216-5: 2013; Seamless steel pipes for pressure purposes. Technical delivery conditions. stainless steel pipes
• EN 10217-7: 2005; Pressure welded steel pipes. Technical delivery conditions. stainless steel pipes
• EN 10217-7: 2014; Pressure welded steel pipes. Technical delivery conditions. stainless steel pipes
• EN 10218-1 : 1994 ; Steel wire and wire products. General.. Test methods
• EN 10218-1: 2012; Steel wire and wire products. General. Test methods
• EN 10218-2: 1997; Steel wire and wire products. General. Wire dimensions and tolerances
• EN 10218-2: 2012; Steel wire and wire products. General. Wire dimensions and tolerances
• EN 10219-1: 1997; Cold formed welded structural sections of non-alloy and fine grain steels. Technical delivery requirements
• EN 10219-1: 2006; Cold formed welded structural hollow sections of non-alloy and fine grain steels. Technical delivery requirements
• EN 10219-2: 1997; Cold formed welded structural sections of non-alloy and fine grain steels. Tolerances, dimensions and section properties
• EN 10219-2: 2006; Cold formed welded structural hollow sections of non-alloy and fine grain steels. Tolerances, dimensions and section properties
• EN 10221: 1996; Specification for surface quality classes for hot rolled bars and bars. Technical delivery conditions.
• EN 10222-1: 1998; Pressure steel forgings. General requirements for open die forging
• EN 10222-2: 2000; Pressure steel forgings. Ferritic and martensitic steels with specified high temperature properties
• EN 10222-3: 1999; Pressure steel forgings. Nickel steels with specified low temperature properties
• EN 10222-4: 1999; Pressure steel forgings. Weldable fine grain steels with high sealing strength
• EN 10222-5: 2000; Pressure steel forgings. Martensitic, austenitic and austenitic-ferritic stainless steels
• EN 10223-1: 1998; Steel wire and wire products for fences. Zinc and zinc alloy coated steel barbed wire
• EN 10223-1: 2012; Steel wire and wire products for fence and netting. Zinc and zinc alloy coated steel barbed wire
• EN 10223-2: 1998; Steel wire and wire products for fences. Hexagonal steel wire mesh for agriculture, insulation and fencing
• EN 10223-2: 2012; Steel wire and wire products for fence and netting. Hexagonal steel wire mesh for agriculture, insulation and fencing
• EN 10223-3: 1998; Steel wire and wire products for fences. Hexagonal steel wire mesh for engineering purposes
• EN 10223-3: 2013; Steel wire and wire products for fence and netting. Hexagonal steel mesh products for civil engineering
• EN 10223-4: 1998; Steel wire and wire products for fences. steel wire welded mesh fence
• EN 10223-4: 2012; Steel wire and wire products for fence and netting. steel wire welded mesh fence
• EN 10223-5: 1998; Steel wire and wire products for fences. steel wire woven hinged joint and knotted mesh fence
• EN 10223-5: 2012; Steel wire and wire products for fence and netting. steel wire woven hinged joint and knotted mesh fence
• EN 10223-6: 1998; Steel wire and wire products for fences. steel wire chain link fencing
• EN 10223-6: 2012; Steel wire and wire products for fence and netting. steel wire chain link fencing
• EN 10223-7: 2012; Steel wire and wire products for fence and netting. steel wire welded panels for fence
• EN 10223-8: 2013; Steel wire and wire products for fence and netting. welded mesh gabion products
• EN 10225: 2009; Weldable structural steels for fixed offshore structures. Technical delivery conditions.
• EN 10226-2: 2005; Pipe threads with pressure-tight connections on the threads. Conical external threads and tapered internal threads. Dimensions, tolerances and identification
• EN 10226-3: 2005; Pipe threads with pressure-resistant connections on the threads. Verification with limit indicators
• EN 10228-1: 1999; Non-destructive testing of steel forged parts. Magnetic particle inspection
• EN 10228-1: 2016; Non-destructive testing of steel forged parts. Magnetic particle inspection
• EN 10228-2: 1998; Non-destructive testing of steel forged parts. penetrating test
• EN 10228-2: 2016; Non-destructive testing of steel forged parts. penetrating test
• EN 10228-3: 1998; Non-destructive testing of steel forged parts. Ultrasonic testing of ferritic or martensitic steel forgings
• EN 10228-3: 2016; Non-destructive testing of steel forged parts. Ultrasonic testing of ferritic or martensitic steel forgings
• EN 10228-4: 1999; Non-destructive testing of steel forged parts. Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
• EN 10228-4: 2016; Non-destructive testing of steel forged parts. Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
• EN 10229: 1998; Evaluation of the resistance of steel products to hydrogen induced cracking (HIC).
• EN 10230-1: 2000; Steel wire nails. Loose nails for general applications
• EN 10232: 1994; Metallic materials. Tube (in full section). Bending test.
• EN 10233: 1994; Metallic materials. Tube. Flattening test.
• EN 10234 : 1994 ; Metallic materials. Tube. Drift expansion test.
• EN 10236: 1994; Metallic materials. Tube. Ring expansion test.
• EN 10237: 1994; Metallic materials. Tube. Ring pull test.
• EN 10238: 1997; Automatically sandblasted and automatically primed structural steel products.
• EN 10238: 2009; Structural steel products automatically sandblasted and automatically prefabricated primed.
• EN 10240: 1998; Inner and/or outer protective coatings for steel pipes. Properties of hot-dip galvanized coatings applied in automatic plants.
• EN 10242: 1995; Threaded pipe fittings in malleable cast iron.
• EN 10243-1: 1999; Steel die forging. Tolerances in dimensions. Drop and vertical press forgings
• EN 10243-2: 1999; Steel die forging. Tolerances in dimensions. Sad tattoos made on horizontal tattoo machines
• EN 10244-1: 2001; Steel wire and wire products. Non-ferrous metallic coatings on steel wire. General Principles
• EN 10244-1 : 2009 ; Steel wire and wire products. Non-ferrous metallic coatings on steel wire. General Principles
• EN 10244-2: 2001; Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Zinc or zinc alloy coatings
• EN 10244-2: 2009; Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Zinc or zinc alloy coatings
• EN 10244-3: 2001; Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Aluminum coatings
• EN 10244-4: 2001; Steel wire and wire products. Non-ferrous metallic coatings on steel wire. tin coatings
• EN 10244-5: 2001; Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Nickel coatings
• EN 10244-6: 2001; Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Copper, bronze or brass finishes
• EN 10245-1: 2001; Steel wire and wire products. Organic coatings on steel wire. general rules
• EN 10245-1 : 2011 ; Steel wire and wire products. Organic coatings on steel wire. general rules
• EN 10245-2: 2001; Steel wire and wire products. Organic coatings on steel wire. PVC finished wire
• EN 10245-2: 2011; Steel wire and wire products. Organic coatings on steel wire. PVC finished wire
• EN 10245-3: 2001; Steel wire and wire products. Organic coatings on steel wire. PE coated wire
• EN 10245-3 : 2011 ; Steel wire and wire products. Organic coatings on steel wire. PE coated wire
• EN 10245-4: 2011; Steel wire and wire products. Organic coatings on steel wire. polyester coated wire
• EN 10245-5: 2011; Steel wire and wire products. Organic coatings on steel wire. polyamide coated wire
• EN 10246-1: 1996; Non-destructive testing of steel pipes. Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel pipes for verification of hydraulic tightness
• EN 10246-2 : 2000 ; Non-destructive testing of steel pipes. Automatic eddy current testing of seamless and welded (except submerged arc welded) austenitic and austenitic-ferritic steel pipes for verification of hydraulic tightness
• EN 10246-3: 2000; Non-destructive testing of steel pipes. Automatic eddy current testing of seamless and welded (except submerged arc welded) steel pipes for detection of defects

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.