EN European Norm Tests Part 39

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 2591-301: 1996; Electrical and optical connection elements. Test methods. temperature endurance
• EN 2591-302: 1998; Electrical and optical connection elements. Test methods. climate order
• EN 2591-303: 1998; Electrical and optical connection elements. Test methods. Cold/low pressure and moist heat
• EN 2591-304: 1998; Electrical and optical connection elements. Test methods. moist heat steady state
• EN 2591-305: 1998; Electrical and optical connection elements. Test methods. rapid temperature change
• EN 2591-306: 1998; Electrical and optical connection elements. Test methods. mold growth
• EN 2591-307: 1998; Electrical and optical connection elements. Test methods. salt fog
• EN 2591-307: 2012; Aviation series. Electrical and optical connection elements. Test methods. salt fog
• EN 2591-308: 1998; Electrical and optical connection elements. Test methods. sand and dust
• EN 2591-309: 1998; Electrical and optical connection elements. Test methods. dry hot
• EN 2591-310: 1998; Electrical and optical connection elements. Test methods. Cold
• EN 2591-311: 1998; Electrical and optical connection elements. Test methods. low air pressure
• EN 2591-312: 1998; Electrical and optical connection elements. Test methods. Air leak
• EN 2591-313: 1998; Electrical and optical connection elements. Test methods. artificial rain
• EN 2591-314: 1998; Electrical and optical connection elements. Test methods. Immersion at low air pressure
• EN 2591-315: 1998; Electrical and optical connection elements. Test methods. fluid resistance
• EN 2591-315 : 2015 ; Aviation series. Electrical and optical connection elements. Test methods. fluid resistance
• EN 2591-316: 1998; Electrical and optical connection elements. Test methods. ozone resistance
• EN 2591-317: 1998; Electrical and optical connection elements. Test methods. flammability
• EN 2591-318: 1998; Electrical and optical connection elements. Test methods. fire resistance
• EN 2591-319: 1998; Electrical and optical connection elements. Test methods. Gas sealing of solderless wound connections
• EN 2591-320: 1998; Electrical and optical connection elements. Test methods. Ground-level simulated solar radiation
• EN 2591-321: 1998; Electrical and optical connection elements. Test methods. Moist heat, cyclic test
• EN 2591-322: 1998; Electrical and optical connection elements. Test methods. hermeticity
• EN 2591-323: 1998; Electrical and optical connection elements. Test methods. thermal shock
• EN 2591-324: 1998; Electrical and optical connection elements. Test methods. interface sealing
• EN 2591-401 : 1996 ; Electrical and optical connection elements. Test methods. acceleration, steady state
• EN 2591-402: 1998; Electrical and optical connection elements. Test methods. Shock
• EN 2591-402: 2012; Aviation series. Electrical and optical connection elements. Test methods. Shock
• EN 2591-403: 1998; Electrical and optical connection elements. Test methods. Sinusoidal and random vibration
• EN 2591-403: 2012; Aviation series. Electrical and optical connection elements. Test methods. Sinusoidal and random vibration
• EN 2591-404: 1998; Electrical and optical connection elements. Test methods. transverse load
• EN 2591-405: 1998; Electrical and optical connection elements. Test methods. axial load
• EN 2591-406: 1998; Electrical and optical connection elements. Test methods. mechanical durability
• EN 2591-407 : 1999 ; Electrical and optical connection elements. Test methods. Contact holding system and durability of seals
• EN 2591-408: 1998; Electrical and optical connection elements. Test methods. Mating and mismatched forces
• EN 2591-409 : 1999 ; Electrical and optical connection elements. Test methods. Attachment keep in touch
• EN 2591-410: 1998; Electrical and optical connection elements. Test methods. Bit holder in housing (axial)
• EN 2591-411: 1998; Electrical and optical connection elements. Test methods. Bit holder (torsion) in the housing
• EN 2591-412 : 1999 ; Electrical and optical connection elements. Test methods. Contact insertion and subtraction forces
• EN 2591-413: 1998; Electrical and optical connection elements. Test methods. Holding force of grounding spring system
• EN 2591-414: 1998; Electrical and optical connection elements. Test methods. Lanyard release connectors mismatch
• EN 2591-420: 2006; Aviation series. Electrical and optical connection elements. Test methods. Mechanical strength of rear accessories
• EN 2591-423 : 2006 ; Aviation series. Electrical and optical connection elements. Test methods. connector back accessories thread strength
• EN 2591-515 : 2005 ; Aviation series. Electrical and optical connection elements. Test methods. hydrolytic stability
• EN 2591-609 : 2005 ; Aviation series. Electrical and optical connection elements. Test methods. Optical elements. The effectiveness of the cable attachment. cable cyclic stretch
• EN 2591: 1992; Electrical and optical connection elements. Test methods. General.
• EN 2591-A2 : 1994 ; Electrical and optical connection elements. Test methods. Examination of dimensions and mass
• EN 2591-B1 : 1992 ; Electrical and optical connection elements. Test methods. contact resistance. low level
• EN 2591-B2 : 1994 ; Electrical and optical connection elements. Test methods. Contact resistance at rated current
• EN 2591-B3 : 1994 ; Electrical and optical connection elements. Test methods. Electrical continuity at the microvolt level
• EN 2591-B4 : 1994 ; Electrical and optical connection elements. Test methods. Discontinuity of contacts in the microsecond range
• EN 2591-B5 : 1994 ; Electrical and optical connection elements. Test methods. Body (shell) electrical continuity
• EN 2591-B6 : 1994 ; Electrical and optical connection elements. Test methods. Insulation resistance measurement
• EN 2591-B7 : 1994 ; Electrical and optical connection elements. Test methods. voltage proof test
• EN 2591-B8 : 1994 ; Electrical and optical connection elements. Test methods. Temperature rise due to rated current
• EN 2591-B9: 1994; Electrical and optical connection elements. Test methods. Current temperature drop
• EN 2591-C1 : 1992 ; Electrical and optical connection elements. Test methods. temperature endurance
• EN 2591-D1 : 1992 ; Electrical and optical connection elements. Test methods. acceleration, steady state
• EN 2593-001: 2014; Aviation series. Bases for 10 A electromagnetic plug-in relays, two- and four-pole double-throw. Technical specification
• EN 2596: 1990; Washers, lock, radial thread, of corrosion-resistant steel, cadmium-plated. Dimensions.
• EN 2596: 2006; Aviation series. Washers, lock, radial serration of corrosion-resistant steel, cadmium-plated for flight control rods. Dimensions.
• EN 2597: 1998; Carbon fiber reinforced plastics. Unidirectional laminates. Tensile test perpendicular to the fiber direction.
• EN 2601: 1996; The forks are adjustable. Technical specification.
• EN 2602: 2005; Aviation series. Connection points for adapters, threaded, with locking ring. Geometric configuration.
• EN 2603: 2005; Aviation series. Port ends for adapters, threaded, with lock ring. Geometric configuration.
• EN 2604 : 2005 ; Aviation series. 8$0D 30′ interface for adapters, threaded, with lock ring. Geometric configuration.
• EN 2605 : 2005 ; Aviation series. 24$0D interface for adapters, threaded, with lock ring. Geometric configuration.
• EN 2606 : 2009 ; Aviation series. 60$0D interface for adapters, threaded, with lock ring. Geometric configuration.
• EN 2607: 2005; Aviation series. O-rings for adapters, threaded, with lock ring. Questionnaire.
• EN 2608: 2005; Aviation series. Installation and removal requirements for 8$0D 30' adapters, threaded, with lock ring.
• EN 2609: 1989; Specifications for rotary barrels, control cable in copper-zinc alloys. Dimensions and loads.
• EN 2624 : 2007 ; Aviation series. Pressure pulse testing of hydraulic system components.
• EN 2630: 1994; Aluminum alloy AL-P7009-T74511 ; Extruded bars and sections a or D 3L 125 mm with peripheral coarse grain control.
• EN 2632: 1994; Aluminum alloy AL-P7075-T73511 ; Extruded bars and sections a or D 3L 100 mm with peripheral coarse grain control.
• EN 2632: 2005; Aviation series. Aluminum alloy AL-P7075 ; T73511 ; Extruded bar and section. a or D 3L 150 mm with peripheral coarse grain control.
• EN 2633: 1994; Aluminum alloy AL-P2024-T3511 ; Extruded bars and sections 1,2 mm 3L a or D 3L 150 mm with peripheral coarse grain control.
• EN 2633: 2015; Aviation series. Aluminum alloy AL-P2024 ; AlCu4Mg1; T3511 ; Extruded bars and sections. 1,2 mm 3L De 3L 160 mm with peripheral coarse grain control.
• EN 2635: 2005; Aviation series. Aluminum alloy AL-P2014A. T6511 ; Extruded bar and section. a or D 3L with 200 mm circumferential coarse control.
• EN 2636: 1994; Aluminum alloy AL-P6082-T6 ; Extruded bars and sections a or D 3L 200 mm with peripheral coarse grain control.
• EN 2641: 1989; Specifications for control cable assemblies. Combinations and sizes.
• EN 2644: 1998; Rod assemblies for flight controls. Technical specification.
• EN 2645: 2005; Aviation series. Locking rings for adapters, threaded, with locking ring. Dimensions.
• EN 2647: 1995; Nuts, hexagonal, self-locking, ball seat, alloy steel, cadmium plated, MoS$d2 lubricated. Classification : 900 MPa (at ambient temperature)/235^DC.
• EN 2647: 2006; Aviation series. Nuts, hexagonal, self-locking, ball seat, alloy steel, cadmium plated, MoS$d2 lubricated. Classification : 900 MPa (at ambient temperature) / 235^DC.
• EN 2648: 1995; Washers, concave, alloy steel, cadmium plated.
• EN 2648: 2013; Aviation series. Washers, concave, alloy steel, cadmium plated.
• EN 2649: 1995; Screws, round head, slotted, head thread, alloy steel, cadmium plated. classification 900 MPa (at ambient temperature)/235^DC.
• EN 2650: 1997; Screws, round head, slotted, threaded, of corrosion-resistant steel, passivated. Classification : 600 MPa (at ambient temperature) /425^DC.
• EN 2651: 1997; Screws, round head, slotted, threaded, brass, tin plated. Classification : 380 MPa (at ambient temperature)/80^DC.
• EN 2652: 1997; Screws, 100$0D countersunk head, slotted, head thread, alloy steel, cadmium plated. Classification : 900 MPa (at ambient temperature)/235^DC.
• EN 2653: 1997; Screws, 100$0D countersunk normal head, slotted, threaded, corrosion resistant steel, passivated. Classification : 600 MPa (at ambient temperature) /425^DC.
• EN 2654: 1997; Screws, 100$0D countersunk normal head, slotted, threaded, brass, tin plated. Classification : 380 MPa (at ambient temperature)/80^DC.
• EN 2665-001: 1999; Circuit breakers, three-pole, temperature compensated, rated currents 20 A - 50 A. Technical specifications
• EN 2665-001 : 2013 ; Aviation series. Circuit breakers, three-pole, temperature compensated, rated current 20 A - 50 A. Technical specifications
• EN 2665-003: 1999; Circuit breakers, three-pole, temperature compensated, rated currents 20 A - 50 A. Metric threaded terminals. product standard
• EN 2665-004: 1999; Circuit breakers, three pole, temperature compensated, rated currents 20 A - 50 A. UNC threaded terminals. product standard
• EN 2665-004: 2013; Aviation series. Circuit breakers, three poles, temperature compensated, rated current 20 A - 50 A. UNC threaded terminals. product standard
• EN 2680 : 2006 ; Aviation series. Nuts, anchor, self-locking, floating, self-aligning, two shoes, alloy steel, cadmium plated, MoS$d2 lubricated. Classification : 900 MPa (at ambient temperature) / 235^DC.
• EN 2681: 2004; Aviation series. Aluminum alloy AL-P7010-T74 ; Hand and die forging. 3L 150mm.

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.