EN European Norm Tests Part 145

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 61161: 2007; Ultrasonic. power measurement. Radiation force balances and performance requirements.
• EN 61161: 2013; Ultrasonic. power measurement. Radiation force balances and performance requirements.
• EN 61162-1: 1996; Marine navigation and radiocommunication equipment and systems. Digital interfaces. Single speaker and multiple listeners
• EN 61162-1: 2001; Marine navigation and radiocommunication equipment and systems. Digital interfaces. Single speaker and multiple listeners
• EN 61162-1: 2008; Marine navigation and radiocommunication equipment and systems. Digital interfaces. Single speaker and multiple listeners
• EN 61162-1: 2011; Marine navigation and radiocommunication equipment and systems. Digital interfaces. Single speaker and multiple listeners
• EN 61162-2: 1999; Marine navigation and radiocommunication equipment and systems. Digital interfaces. Single speaker and multi listener, high speed transmission
• EN 61162-3 : 2008+A2 : 2014 ; Marine navigation and radiocommunication equipment and systems. Digital interfaces. serial data instrument network
• EN 61162-402: 2005; Marine navigation and radiocommunication equipment and systems. Digital interfaces. Multiple speakers and multiple listeners. Ship systems interconnections. Documentation and testing requirements
• EN 61162-450 : 2011+A1 : 2016 ; Marine navigation and radiocommunication equipment and systems. Digital interfaces. Multiple speakers and multiple listeners. Ethernet interconnection
• EN 61162-460: 2015; Marine navigation and radiocommunication equipment and systems. Digital interfaces. Multiple speakers and multiple listeners. Ethernet interconnect. safety and security
• EN 61163-1 : 2006 ; Reliability stress screening. Repairable assemblies produced in batches
• EN 61166: 1993; Technical specifications for high voltage alternating current circuit breakers. Guide to the seismic qualification of high-voltage alternating current circuit breakers.
• EN 61167: 2011; Metal halide lamps. Performance characteristics.
• EN 61167: 2016; Metal halide lamps. Performance characteristics.
• EN 61168 : 1994 ; Medical electrical equipment. Special requirements for performance. Methods of declaring functional performance characteristics of radiotherapy simulators.
• EN 61169-1: 1996; Radio frequency connectors. General specification. General requirements and measurement methods
• EN 61169-1: 2013; Radio frequency connectors. General specification. General requirements and measurement methods
• EN 61169-2: 2007; Radio frequency connectors. Section properties. 9,52 type radio frequency coaxial connectors
• EN 61169-8 : 2007 ; Radio frequency connectors. Section properties. RF coaxial connectors with a 6,5 mm (0,256 inch) outer conductor inner diameter with bayonet lock. Characteristic impedance 50 ohms (BNC type)
• EN 61169-14 : 2010 ; Radio frequency connectors. Outer conductor with screw coupling 12 mm inner diameter RF coaxial connectors. Characteristic impedance 75 ohms (Type 3,5/12)
• EN 61169-16:2007; Radio frequency connectors. Section properties. RF coaxial connectors with 7 mm (0,276 inch) outer conductor inner diameter with screw coupling. Characteristic impedance 50 ohms (75 ohms) (type N)
• EN 61169-18 : 2011 ; Radio frequency connectors. Section properties. SSMA type radio frequency coaxial connectors
• EN 61169-19: 2011; Radio frequency connectors. Section properties. SSMB type radio frequency coaxial connectors
• EN 61169-24: 2009; Radio frequency connectors. Section properties. Screw-coupled radio frequency coaxial connectors (type F) typically for use in 75 ohm cable networks
• EN 61169-26: 2013; Radio frequency connectors. Cross section specifications for TNCA series RF coaxial connectors
• EN 61169-29: 2005; Radio frequency connectors. Section properties. Miniature model of radio frequency coaxial connectors screw, plug-in, push-pull or quick-lock, slide (rack and panel applications). Characteristic impedance 50 ohms (type 1,0/2,3). 50 ohm and 75 ohm applications
• EN 61169-31: 2000; Radio frequency connectors. RF coaxial connectors with a 1,0 mm (0,039 inch) outer conductor inner diameter with screw coupling. Characteristic impedance 50 ohms (type 1,0)
• EN 61169-32: 2000; Radio frequency connectors. RF coaxial connectors with a 1,85 mm (0,072 inch) outer conductor inner diameter with screw coupling. Characteristic impedance 50 ohms (type 1,85)
• EN 61169-33: 1997; Radio frequency connectors. Section specifications for BMA rf series connectors
• EN 61169-35: 2011; Radio frequency connectors. Cross-section specifications for 2,92 series RF connectors
• EN 61169-37 : 2007 ; Radio frequency connectors. Cross-section specifications for STWX8 RF connectors
• EN 61169-38: 2009; Radio frequency connectors. Section properties. Radio frequency coaxial connector model, sliding (rack and panel applications). Characteristic impedance 50 ohms (TMA type). 50 ohm applications
• EN 61169-39: 2011; Radio frequency connectors. Cross section specifications for CQM series quick lock RF connectors
• EN 61169-40: 2011; Radio frequency connectors. Section specifications for 2;4 series RF connectors
• EN 61169-41: 2011; Radio frequency connectors. Cross section specifications for CQA series quick lock RF coaxial connectors
• EN 61169-42: 2013; Radio frequency connectors. Cross section specifications for CQN series quick lock RF coaxial connectors
• EN 61169-43: 2013; Radio frequency connectors. Cross section specifications for RBMA series blind match RF coaxial connectors
• EN 61169-44: 2013; Radio frequency connectors. Sectional specifications for serial SMP push-on radio frequency coaxial connectors
• EN 61169-45: 2014; Radio frequency connectors. Cross section specifications for serial SQMA series quick lock RF coaxial connectors
• EN 61169-47: 2012; Radio frequency connectors. Cross-section specifications for clamp-coupled radio frequency coaxial connectors typically for use on 75 $GW cable networks (F-Quick type)
• EN 61169-47: 2015; Radio frequency connectors. Cross-section specifications for clamp-coupled radio frequency coaxial connectors typically for use on 75 $GW cable networks (F-Quick type)
• EN 61169-48 : 2015 ; Radio frequency connectors. Sectional specifications for serial BMP RF coaxial connectors
• EN 61169-49: 2014; Radio frequency connectors. Cross-section specifications for SMAA series RF connectors
• EN 61169-50: 2015; Radio frequency connectors. Cross-section characteristics for RF coaxial connectors with an inner diameter of 4,11 mm of outer conductors with a quick-lock system. Characteristic impedance 50 Ohm (type QMA)
• EN 61169-51: 2015; Radio frequency connectors. Cross-section specifications for RF coaxial connectors with an inner diameter of 13,5 mm of bayonet-lock outer conductors. Characteristic impedance 50 O (type QLI)
• EN 61169-52 : 2015 ; Radio frequency connectors. Cross section specifications for serial MMCX RF coaxial connectors
• EN 61169-53: 2016; Radio frequency connectors. Cross-section specifications for RF coaxial connectors with screw-lock 16 mm outer conductor inner diameter. Characteristic impedance 50 O (Type S7-16)
• EN 61169-54: 2016; Radio frequency connectors. Cross-section characteristics for coaxial connectors with outer conductor 10 mm inner diameter, nominal characteristic impedance 50 $I, series 4,3-10
• EN 61169-58: 2016; Radio frequency connectors. Cross-section specifications for blind-matched RF coaxial connectors. Characteristic impedance 50 $GW (SBMA type)
• EN 61169-1-1: 1997; Radio frequency connectors. Single, multi-series, bilingual blank detail specification
• EN 61173: 1995; Surge protection for photovoltaic (PV) power generating systems. Guide.
• EN 61174: 1999; Marine navigation and radiocommunication equipment and systems. Electronic map display and information system (ECDIS). Operational and performance requirements, test methods and required test results.
• EN 61174: 2008; Marine navigation and radiocommunication equipment and systems. Electronic map display and information system (ECDIS). Operational and performance requirements, test methods and required test results.
• EN 61174: 2015; Marine navigation and radiocommunication equipment and systems. Electronic map display and information system (ECDIS). Operational and performance requirements, test methods and required test results.
• EN 61175-1 : 2015 ; Industrial systems, plants and equipment and industrial products. Identification of signals. ground rules
• EN 61175 : 2005 ; Industrial systems, plumbing and equipment, and industrial products. Identification of signals.
• EN 61176 : 1994 ; Circular saws powered by hand-held mains voltage. Methods for measuring performance.
• EN 61179 : 1993 ; Specification for a helical scan digital composite videocassette recording system using 2 mm magnetic tape in D19 (NTSC, PAL, PAL-M) format.
• EN 61180-1: 1995; High voltage testing techniques for low voltage equipment. Definitions, test and procedure requirements
• EN 61180-2: 1995; High voltage testing techniques for low voltage equipment. test equipment
• EN 61180: 2016; High voltage testing techniques for low voltage equipment. Definitions, test and procedure requirements, test equipment.
• EN 61181 : 1993 ; Impregnated insulating materials. Application of dissolved gas analysis (DGA) to factory testing on electrical equipment.
• EN 61181 : 2007+A1 : 2012 ; Electrical equipment filled with mineral oil. Application of dissolved gas analysis (DGA) to factory testing on electrical equipment.
• EN 61182-7: 1996; Printed boards. Electronic data definition and transfer. Bare board electrical test information in digital format
• EN 61182-2-2: 2012; Printed panel mounting products. Production definition data and transfer methodology. Cross-section requirements for the implementation of the printed carton production data description
• EN 61183 : 1995 ; Electroacoustic. Random incidence and scattered field calibration of sound level meters.
• EN 61185: 1997; Magnetic oxide nuclei. (ETD cores) are intended for use in power supply applications. Dimensions.
• EN 61185 : 2005 ; Ferrite cores (ETD cores) intended for use in power supply applications. Dimensions.
• EN 61187: 1996; Electrical and electronic measuring devices. documents.
• EN 61188-7: 2009; Printed boards and printed board assemblies. Design and use. Electronic component zero routing for CAD library construction
• EN 61188-1-1: 1997; Printed boards and assemblies. Design and use. General requirements. Flatness considerations for electronic assemblies
• EN 61188-1-2: 1998; Printed boards and assemblies. Design and use. General requirements. General requirements. controlled impedance
• EN 61188-5-3: 2007; Printed boards and printed board assemblies. Design and use. Additional (land/common) considerations. Components with gull-wing tips on both sides
• EN 61188-5-4: 2007; Printed boards and printed board assemblies. Design and use. Annexes (land/common) considerations. J-end components on both sides
• EN 61188-5-5: 2007; Printed boards and printed board assemblies. Design and use. Additional (land/common) considerations. Components with gull-wing tips on all four sides
• EN 61188-5-8 : 2008 ; Printed boards and printed board assemblies. Design and use. Annexes (land/common) considerations. Field array components (BGA, FBGA, CGA, LGA)
• EN 61189-1: 1997; Test methods for electrical materials, printed boards and other interconnect structures and assemblies. General testing methods and methodology
• EN 61189-2: 1997; Test methods for electrical materials, printed boards and other interconnect structures and assemblies. Test methods for materials for connecting structures
• EN 61189-2: 2006; Test methods for electrical materials, printed boards and other interconnect structures and assemblies. Test methods for materials for connecting structures
• EN 61189-3: 1997; Test methods for electrical materials, printed boards and other interconnect structures and assemblies. Test methods for interconnect structures (printed boards)
• EN 61189-3: 2008; Test methods for electrical materials, printed boards and other interconnect structures and assemblies. Test methods for interconnect structures (printed boards)
• EN 61189-5: 2006; Test methods for electrical materials, interconnect structures and assemblies. Test methods for print board assemblies
• EN 61189-6: 2006; Test methods for electrical materials, interconnect structures and assemblies. Test methods for materials used in the manufacture of electronic assemblies
• EN 61189-11 : 2013 ; Test methods for electrical materials, printed boards and other interconnect structures and assemblies. Measurement of melting temperature or melting temperature ranges of solder alloys
• EN 61189-5-1: 2016; Test methods for electrical materials, printed boards and other interconnect structures and assemblies. General test methods for materials and assemblies. Guidance for printed carton assemblies
• EN 61189-5-2: 2015; Test methods for electrical materials, printed boards and other interconnect structures and assemblies. General test methods for materials and assemblies. Soldering flux for printed board assemblies
• EN 61189-5-3: 2015; Test methods for electrical materials, printed boards and other interconnect structures and assemblies. General test methods for materials and assemblies. Solder paste for printed panel assemblies
• EN 61189-5-4 : 2015 ; Test methods for electrical materials, printed boards and other interconnect structures and assemblies. General test methods for materials and assemblies. Solder alloys and fused and unmelted solid wires for printed board assemblies
• EN 61189-2-719: 2016; Test methods for electrical materials, printed boards and other interconnect structures and assemblies. Test methods for materials for connecting structures. Relative permittivity and loss tangent (500 MHz to 10 GHz)
• EN 61189-2-721: 2015; Test methods for electrical materials, printed boards and other interconnect structures and assemblies. Test methods for materials for connecting structures. Measurement of relative permittivity and loss tangent for copper-clad laminate at microwave frequency using a split dielectric resonator
• EN 61189-3-719: 2016; Test methods for electrical materials, printed boards and other interconnect structures and assemblies. Test methods for interconnect structures (printed boards). Monitoring of single-lined through hole (PTH) resistance change during temperature cycling
• EN 61190-1-2: 2007; Connection materials for electronics assembly. Requirements for solder pastes for high-quality interconnections in electronics assembly
• EN 61190-1-2: 2014; Connection materials for electronics assembly. Requirements for solder pastes for high-quality interconnections in electronics assembly
• EN 61190-1-3 : 2007+A1 : 2010 ; Connection materials for electronics assembly. Requirements for electronic-grade solder alloys and melted and unmelted solid solders for electronic soldering applications
• EN 61191-1: 1999; Printed board assemblies. General specification. Requirements for brazed electrical and electronic assemblies using surface mount and related mounting technologies
• EN 61191-1 : 2013 ; Printed board assemblies. General specification. Requirements for brazed electrical and electronic assemblies using surface mount and related mounting technologies
• EN 61191-2: 1999; Printed board assemblies. Section properties. Requirements for surface mount brazed assemblies
• EN 61191-2: 2013; Printed board assemblies. Section properties. Requirements for surface mount brazed assemblies
• EN 61191-3: 1999; Printed board assemblies. Section properties. Requirements for through-hole brazed assemblies

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.