EN European Norm Tests Part 14

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 755-7: 2016; Aluminum and aluminum alloys. Extruded bar/bar, pipe and profiles. Seamless pipes, size and form tolerances
• EN 755-8: 1998; Aluminum and aluminum alloys. Extruded bar/bar, pipe and profiles. Port pipes, size and form tolerances
• EN 755-8: 2008; Aluminum and aluminum alloys. Extruded bar/bar, pipe and profiles. Port pipes, size and form tolerances
• EN 755-8: 2016; Aluminum and aluminum alloys. Extruded bar/bar, pipe and profiles. Port pipes, size and form tolerances
• EN 755-9 : 2008 ; Aluminum and aluminum alloys. Extruded bar/bar, pipe and profiles. Profiles, size and form tolerances
• EN 755-9 : 2016 ; Aluminum and aluminum alloys. Extruded bar/bar, pipe and profiles. Profiles, size and form tolerances
• EN 756: 1996; Welding consumables. Wire electrodes and wire flux combinations for submerged arc welding of unalloyed and fine grain steels. classification
• EN 757: 1997; Welding consumables. Covered electrodes for manual metal arc welding of high-strength steels. classification
• EN 758: 1997; Welding consumables. Tubular cored electrodes for metal arc welding with and without gas shielding of unalloyed and fine grain steels. classification
• EN 759: 1997; Welding consumables. Technical delivery conditions for welding filler metals. Product type, dimensions, tolerances and marking.
• EN 760: 1996; Welding consumables. Fluxes for submerged arc welding. classification
• EN 761: 1995; Plastic piping systems. Glass reinforced thermoset plastic (GRP) pipes. Determination of the creep factor under dry conditions.
• EN 763: 1995; Plastic pipe and duct systems. Injection molded thermoplastic fittings. Test method for visually assessing the effects of warming.
• EN 764-2: 2012; Pressure equipment. Quantities, symbols and units
• EN 764-4: 2014; Pressure equipment. Establishment of technical delivery conditions for metallic materials
• EN 764-5: 2014; Pressure equipment. Inspection documents of metallic materials and compliance with material specification
• EN 764: 1995; Pressure equipment. Terminology and symbols. Pressure, temperature, volume.
• EN 765: 1994; Sacks for transporting food aid. Only sacks made of woven polyolefin fabric other than polypropylene.
• EN 766: 1994; Sacks for transporting food aid. Sacks made of jute fabric.
• EN 767 : 1994 ; Sacks for transporting food aid. Sacks made of woven jute/polyolefin fabric.
• EN 768 : 1994 ; Sacks for transporting food aid. Sacks made of lined cotton fabric.
• EN 769: 1994; Sacks for transporting food aid. Sacks made of woven cotton/polyolefin fabric.
• EN 770: 1994; Sacks for transporting food aid. Paper sacks.
• EN 771-1 : 2011+A1 : 2015 ; Specification for wall units. clay masonry units
• EN 771-2: 2001; Specification for wall units. Calcium silicate wall units
• EN 771-2 : 2011+A1 : 2015 ; Specification for wall units. Calcium silicate wall units
• EN 771-3 : 2011+A1 : 2015 ; Specification for wall units. Aggregate concrete masonry units (dense and light aggregates)
• EN 771-4: 2001; Specification for wall units. Autoclaved aerated concrete wall units
• EN 771-4 : 2011+A1 : 2015 ; Specification for wall units. Autoclaved aerated concrete wall units
• EN 771-5 : 2011+A1 : 2015 ; Specification for wall units. Produced stone masonry units
• EN 771-6: 2001; Specification for wall units. Natural stone masonry units
• EN 771-6: 2005; Specification for wall units. Natural stone masonry units
• EN 771-6 : 2011+A1 : 2015 ; Specification for wall units. Natural stone masonry units
• EN 772-1 : 2000 ; Test methods for masonry units. Determination of compressive strength
• EN 772-1 : 2011+A1 : 2015 ; Test methods for masonry units. Determination of compressive strength
• EN 772-2: 1998; Test methods for masonry units. Determining the percentage of void in masonry units (with paper indentation)
• EN 772-3: 1998; Test methods for masonry units. Determination of the net volume and percentage voids of clay masonry units by hydrostatic weighing
• EN 772-4: 1998; Test methods for masonry units. Determination of true and bulk density and total and open porosity for natural stone masonry units
• EN 772-5: 2016; Test methods for masonry units. Determination of active soluble salt content of clay masonry units
• EN 772-7: 1998; Test methods for masonry units. Determination of water absorption of clay masonry moisture resistant track units by boiling in water
• EN 772-9: 1998; Test methods for masonry units. Determination of volume and void percentages and net volumes of clay and calcium silicate masonry units with sand fill
• EN 772-10: 1999; Test methods for masonry units. Determination of moisture content of calcium silicate and autoclaved aerated concrete units
• EN 772-11 : 2000 ; Test methods for masonry units. Determination of water absorption due to capillary action of aggregate concrete, manufactured stone and natural stone masonry units and initial water absorption rates of clay masonry units
• EN 772-11 : 2011 ; Test methods for masonry units. Determination of water absorption due to capillary action of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units and initial water absorption rate of clay masonry units
• EN 772-13 : 2000 ; Test methods for masonry units. Determination of net and gross dry density of masonry units (except natural stone)
• EN 772-15 : 2000 ; Test methods for masonry units. Determination of water vapor permeability of autoclaved aerated concrete masonry units
• EN 772-16 : 2000 ; Test methods for masonry units. Determination of dimensions
• EN 772-16 : 2011 ; Test methods for masonry units. Determination of dimensions
• EN 772-18 : 2000 ; Test methods for masonry units. Determination of freeze-thaw resistance of calcium silicate masonry units
• EN 772-18 : 2011 ; Test methods for masonry units. Determination of freeze-thaw resistance of calcium silicate masonry units
• EN 772-19 : 2000 ; Test methods for masonry units. Determination of moisture expansion of clay masonry units with large horizontal holes
• EN 772-20 : 2000 ; Test methods for masonry units. Determination of the flatness of the faces of masonry units
• EN 772-21: 2011; Test methods for masonry units. Determination of water absorption by cold water absorption of clay and calcium silicate masonry units
• EN 773: 1999; General requirements for components used in hydraulic pressure relief pipes, drains and sewers.
• EN 774: 1996; Garden equipment. Hand-held, integrated electric hedge trimmers. Safety.
• EN 777-1: 1999; Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use. System D, security
• EN 777-1: 2009; Multi-burner gas-operated, radiant overhead tube heater systems for non-domestic use. System D. Security
• EN 777-2: 1999; Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use. System E, security
• EN 777-2: 2009; Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use. System E. Security
• EN 777-3: 2000; Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use. System F, security
• EN 777-3: 2009; Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use. System F. Security
• EN 777-4: 1999; Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use. System H, security
• EN 777-4: 2009; Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use. System H. Security
• EN 778: 1998; Household gas-operated forced convection air heaters for space heating, not exceeding 70 kW net heat input, without a fan to assist the transport of combustion air and/or combustion products.
• EN 778: 2009; Household gas-operated forced convection air heaters for space heating, not exceeding 70 kW net heat input, without a fan to assist the transport of combustion air and/or combustion products.
• EN 779: 1993; Particulate air filters for general ventilation. Requirements, testing, marking.
• EN 779: 2012; Particulate air filters for general ventilation. Determination of filtration performance.
• EN 786 : 1996+A2 : 2009 ; Garden equipment. Electric powered, rear-controlled and hand-held lawnmowers and edge trimmers. Mechanical safety.
• EN 787: 1994; Sacks for transporting food aid. Sacks made of polyethylene film.
• EN 788 : 1994 ; Sacks for transporting food aid. Tubular sacks made of composite film.
• EN 789: 1996; wooden structures. Test methods. Determination of mechanical properties of wood-based panels.
• EN 789: 2004; wooden structures. Test methods. Determination of mechanical properties of wood-based panels.
• EN 790: 1995; Inland navigation vessels. Stairs with inclination angles between 45$0D and 60$0D. Requirements, types.
• EN 792-1 : 2000+A1 : 2008 ; Hand-held non-electric power tools. Security requirements. Assembly power tools for non-threaded mechanical fasteners
• EN 792-2 : 2000+A1 : 2008 ; Hand-held non-electric power tools. Security requirements. Cutting and crimping power tools
• EN 792-3 : 2000+A1 : 2008 ; Hand-held non-electric power tools. Security requirements. Drills and taps
• EN 792-4 : 2000+A1 : 2008 ; Hand-held non-electric power tools. Security requirements. Non-rotary pulsed power tools
• EN 792-5 : 2000+A1 : 2008 ; Hand-held non-electric power tools. Security requirements. rotary hammer drills
• EN 792-6 : 2000+A1 : 2008 ; Hand-held non-electric power tools. Security requirements. Assembly power tools for threaded fasteners
• EN 792-8 : 2001+A1 : 2008 ; Hand-held non-electric power tools. Security requirements. Sanders and polishers
• EN 792-9 : 2001+A1 : 2008 ; Hand-held non-electric power tools. Security requirements. Die grinders
• EN 792-10 : 2000+A1 : 2008 ; Hand-held non-electric power tools. Security requirements. Compression power tools
• EN 792-11 : 2000+A1 : 2008 ; Hand-held non-electric power tools. Security requirements. Nibblers and scissors
• EN 792-12 : 2000+A1 : 2008 ; Hand-held non-electric power tools. Security requirements. Small circular, small oscillating and reciprocating saws
• EN 792-13 : 2000+A1 : 2008 ; Hand-held non-electric power tools. Security requirements. fastener driving tools
• EN 793: 1998; Special requirements for the security of medical supply units.
• EN 794-2: 1997; Lung ventilators. Special requirements for home care use
• EN 794-3 : 1998+A2 : 2009 ; Lung ventilators. Special requirements for emergency and transport ventilators
• EN 795: 1997; Protection against falls from height. Anchor devices. Requirements and tests.
• EN 795: 2012; Personal fall protection equipment. Anchor devices.
• EN 797: 1996; Barcoding. Symbology features. 'EAN/UPC'.
• EN 798: 1996; Barcoding. Symbology features. 'Kodabar'.
• EN 799: 1996; Barcoding. Symbology features. 'Code 128'.
• EN 800: 1996; Barcoding. Symbology features. 'Code 39'.
• EN 801: 1996; Barcoding. Symbology features. 'Spaced 2/5'.
• EN 802: 1995; Plastic pipe and duct systems. Injection molded thermoplastic fittings for pressure piping systems. Test method for maximum deformation by crushing.
• EN 803: 1995; Plastic piping systems. Injection molded thermoplastic fittings for elastic sealing ring type connections for pressure piping. Test method for resistance to short-term internal pressure without final pressure.
• EN 804: 1995; Plastic piping systems. Injection molded socket fittings for solvent cemented connections for pressure piping. Test method for resistance to short-term internal hydrostatic pressure.
• EN 805:2000; To supply water. Requirements for systems and components outside buildings.
• EN 806-2: 2005; Specifications for installations inside buildings carrying water for human consumption. Design

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.