EN European Norm Tests Part 118

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 60068-3-2 : 1999 ; Environmental test. Guidance. Combined temperature/low air pressure tests
• EN 60068-3-3: 1993; Environmental test. Guidance. Environmental test. Various. Guide to seismic testing methods for equipment
• EN 60068-3-11 : 2007 ; Environmental test. Supporting documents and guidance
• EN 60068-3-13: 2016; Environmental test. Test T. Supporting documentation and guidance on soldering
• EN 60068-5-2 : 2000 ; Environmental test. Guide to drafting test methods. Terms and definitions
• EN 60068-2-30 : 1999 ; Environmental test. Test methods. Test Db and guidance: moist heat, cyclic (12 + 12 hour cycle)
• EN 60068-2-30 : 2005 ; Environmental test. tests. Test Db and guidance : Moist heat, cyclic (12h + 12h cycle)
• EN 60068-2-31 : 2008 ; Environmental test. tests. Test Ec. Rough handling shocks primarily for equipment type samples
• EN 60068-2-32 : 1993 ; Environmental test. Test methods. Test Ed. Free fall
• EN 60068-2-33: 2000; Environmental test. Test methods. Guidance on variation of temperature tests
• EN 60068-2-38 : 1999 ; Environmental test. Test methods. tests. Test Z/AD : combined temperature/humidity cyclic test
• EN 60068-2-38: 2009; Environmental test. tests. Test Z/AD. Compound temperature/humidity cyclic testing
• EN 60068-2-39 : 1999 ; Environmental test. Test methods. tests. Test Z/AMD. Combined sequential cold, low air pressure and moist heat testing
• EN 60068-2-39: 2016; Environmental test. tests. Tests and guidance : Temperature or temperature and humidity combined with low air pressure tests
• EN 60068-2-40 : 2000 ; Environmental test. Test methods. Test Z/AM. Combined cold/low air pressure tests
• EN 60068-2-41: 2000; Environmental test. Test methods. tests. Test Z/BM : Combined dry heat/low air pressure tests
• EN 60068-2-44 : 1995 ; Environmental test. Test methods. tests. Test T. Soldering Guide
• EN 60068-2-45 : 1993 ; Environmental test. Test methods. Environmental test. tests. Test XA and manual. Immersion in cleaning solvents
• EN 60068-2-47 : 1993 ; Environmental test. Test methods. Assembly of components, equipment, and other objects for dynamic testing, including shock (Ea), impact (Eb), vibration (Fc and Fd), and steady-state acceleration (Ga) and guidance
• EN 60068-2-47: 2000; Environmental test. Test methods. Assembly of components, equipment and other objects for vibration, impact and similar dynamic testing
• EN 60068-2-47 : 2005 ; Environmental test. tests. Mounting of samples for vibration, impact and similar dynamic tests
• EN 60068-2-48 : 2000 ; Environmental test. Test methods. Guidance on applying IEC 60068 tests to simulate the effects of storage
• EN 60068-2-50 : 2000 ; Environmental test. Test methods. Tests Z/AFc : Combined cold/vibration (sinusoidal) tests for both radiating and radiating specimens
• EN 60068-2-51 : 2000 ; Environmental test. Test methods. tests. Tests Z/BFc. Combined dry heat/vibration (sinusoidal) tests for both radiant and radiant samples
• EN 60068-2-52: 1996; Environmental test. Test methods. tests. Try kb. Salt fog cyclic (sodium chloride solution)
• EN 60068-2-53 : 2010 ; Environmental test. Tests and guidance. Combined climate (temperature/humidity) and dynamic (vibration/shock) tests
• EN 60068-2-55 : 1993 ; Environmental test. tests. Well and do the guidance test. Vault
• EN 60068-2-55 : 2013 ; Environmental test. tests. Well and do the guidance test. Loose cargo testing including splash
• EN 60068-2-57 : 1993 ; Environmental test. Test methods. Test Ff. Vibration – time defined method
• EN 60068-2-57 : 2000 ; Environmental test. Test methods. Test Ff. Vibration. time-defined method
• EN 60068-2-57 : 2013 ; Environmental test. tests. Test Ff : Vibration. Time history and sine beat method
• EN 60068-2-58 : 1999 ; Environmental test. Test methods. Test Td. Test methods for solderability, resistance to dissolution of metallization and soldering heat of surface mount devices (SMD)
• EN 60068-2-58 : 2015 ; Environmental test. tests. Test Td. Test methods for solderability, resistance to dissolution of metallization and soldering heat of surface mount devices (SMD)
• EN 60068-2-60 : 1996 ; Environmental test. Test methods. Try Ke. Flowing mixed gas corrosion test
• EN 60068-2-61 : 1994 ; Environmental test. Test methods. Test the Z/ABDM. climate order
• EN 60068-2-62: 1996; Environmental test. Test methods. Test Ef. Impact, pendulum hammer
• EN 60068-2-63 : 1995 ; Environmental test. Test methods. Test Equation: Impact, spring hammer
• EN 60068-2-64 : 1995 ; Environmental test. Test methods. Test Fh. Jitter, broadband random (digital control) and routing
• EN 60068-2-64 : 2008 ; Environmental test. tests. Test Fh. vibration, broadband random and guidance
• EN 60068-2-65: 1995; Environmental test. Test methods. Test Fg. vibration, acoustically induced
• EN 60068-2-65: 2013; Environmental test. tests. Test Fg : Vibration. acoustically induced method
• EN 60068-2-66 : 1995 ; Environmental test. Test methods. Test the cx. Moist heat, steady state (unsaturated pressurized steam)
• EN 60068-2-67 : 1996 ; Environmental test. Test methods. Test Cy. Moist heat, steady state, accelerated testing, primarily for components
• EN 60068-2-68 : 1996 ; Environmental test. Test methods. Test L. Dust and sand
• EN 60068-2-69: 1996; Environmental test. Test methods. tests. Test Te. Solderability test of electronic components by wetting balance method for surface mount technology
• EN 60068-2-69 : 2007 ; Environmental test. tests. Test Te. Solderability test of electronic components for surface mount devices (SMD) using the wetting balance method
• EN 60068-2-70: 1996; Environmental test. Test methods. Try xb. Erosion of signs and writing from rubbing fingers and hands
• EN 60068-2-74 : 2000 ; Environmental test. Test methods. Test Xc : Liquid contamination
• EN 60068-2-75 : 1997 ; Environmental test. Test methods. Test Well. hammer tests
• EN 60068-2-75: 2014; Environmental test. tests. Well Test : Hammer tests
• EN 60068-2-77 : 1999 ; Environmental test. Test methods. Body strength and impact shock
• EN 60068-2-78 : 2013 ; Environmental test. tests. Test Cabinet: Humid heat, steady state
• EN 60068-2-82 : 2007 ; Environmental test. tests. Test Tx. Mustache testing methods for electronic and electrical components
• EN 60068-2-83 : 2011 ; Environmental test. tests. Test Tf : Solderability test of electronic components for surface mount devices (SMD) by wetting balance method using solder paste
• EN 60071-1 : 1996 ; Insulation coordination. Definitions, principles and rules
• EN 60071-1 : 2006+A1 : 2010 ; Insulation coordination. Definitions, principles and rules
• EN 60071-2: 1997; Insulation coordination. Reference guide
• EN 60071-5 : 2015 ; Insulation coordination. Procedures for high voltage direct current (HVDC) converter stations
• EN 60073: 1993; Specification for the coding of display devices and actuators by color and additional tools.
• EN 60073: 1997; Basic and safety principles for human-machine interface, marking and identification. Coding principles for indicating devices and actuators.
• EN 60076-2: 2011; power transformers. Temperature rise for liquid immersed transformers
• EN 60076-3: 2013; power transformers. Insulation levels, dielectric tests and external cavities in air
• EN 60076-5: 2001; power transformers. Ability to withstand short circuit
• EN 60076-5: 2006; power transformers. Ability to withstand short circuit
• EN 60076-10: 2016; power transformers. Determining sound levels
• EN 60076-11: 2004; Power transformers . Dry type transformers
• EN 60076-13 : 2006 ; power transformers. Self-protected liquid-filled transformers
• EN 60076-14 : 2013 ; power transformers. Liquid-immersed power transformers using high-temperature insulating materials
• EN 60076-16 : 2011 ; power transformers. Transformers for wind turbines applications
• EN 60076-18 : 2012 ; power transformers. Measurement of frequency response
• EN 60076-19 : 2015 ; power transformers. Rules for the determination of uncertainties in the measurement of losses in power transformers and reactors
• EN 60079-0 : 2006 ; Electrical equipment for explosive gas atmospheres. General Requirements
• EN 60079-0: 2009; explosive atmospheres. Equipment. General Requirements
• EN 60079-0 : 2012+A11 : 2013 ; explosive atmospheres. Equipment. General Requirements
• EN 60079-1:2007; explosive atmospheres. Equipment protection “d” with flameproof enclosures
• EN 60079-1: 2014; explosive atmospheres. Equipment protection “d” with flameproof enclosures
• EN 60079-2 : 2007 ; explosive atmospheres. Equipment protection with pressure guard “p”
• EN 60079-2 : 2014 ; explosive atmospheres. Equipment protection with pressure guard “p”
• EN 60079-5 : 2007 ; explosive atmospheres. Equipment protection with powder filling “q”
• EN 60079-5 : 2015 ; explosive atmospheres. Equipment protection with powder filling “q”
• EN 60079-6 : 2007 ; explosive atmospheres. Equipment protected by oil immersion “o”
• EN 60079-7:2007; explosive atmospheres. Equipment protection with increased safety “e”
• EN 60079-10: 1996; Electrical equipment for explosive gas atmospheres. Classification of hazardous areas
• EN 60079-11 : 2007 ; explosive atmospheres. Equipment protection with intrinsic safety “i”
• EN 60079-11 : 2012 ; explosive atmospheres. Equipment protection with intrinsic safety “i”
• EN 60079-13 : 2010 ; explosive atmospheres. Equipment protection with pressurized chamber “p”
• EN 60079-14: 1997; Electrical equipment for explosive gas atmospheres. Electrical installations in hazardous areas (excluding mines)
• EN 60079-14 : 2008 ; explosive atmospheres. Electrical installation design, selection and installation
• EN 60079-14 : 2014 ; explosive atmospheres. Electrical installation design, selection and installation
• EN 60079-15 : 2005 ; Electrical equipment for explosive gas atmospheres. Construction, testing and marking of protection type “n” electrical apparatus
• EN 60079-15 : 2010 ; explosive atmospheres. Equipment protection according to protection type “n”
• EN 60079-17 : 1997 ; Electrical equipment for explosive gas atmospheres. Inspection and maintenance of electrical installations in hazardous areas (except mines)
• EN 60079-17 : 2007 ; explosive atmospheres. Electrical installation inspection and maintenance
• EN 60079-17 : 2014 ; explosive atmospheres. Electrical installation inspection and maintenance
• EN 60079-18 : 2009 ; explosive atmospheres. Equipment protection with encapsulation “m”
• EN 60079-18 : 2015 ; explosive atmospheres. Equipment protection with encapsulation “m”
• EN 60079-19 : 2007 ; explosive atmospheres. Equipment repair, overhaul and improvement
• EN 60079-19 : 2011+A1 : 2015 ; explosive atmospheres. Equipment repair, overhaul and improvement
• EN 60079-25 : 2010 ; explosive atmospheres. Intrinsically safe electrical systems
• EN 60079-26: 2004; Electrical apparatus for explosive gas atmospheres. Construction, testing and marking of group II category IG electrical apparatus

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.