EN European Norm Tests Part 12

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 669: 1998; Flexible floor coverings. Determination of the dimensional stability of linoleum tiles due to changes in atmospheric humidity.
• EN 671-1: 1995; Fixed fire extinguishing systems. Hose systems. Hose reels with semi-rigid hose
• EN 671-1: 2012; Fixed fire extinguishing systems. Hose systems. Hose reels with semi-rigid hose
• EN 671-2: 1995; Fixed fire extinguishing systems. Hose systems. Flat hose hose systems
• EN 671-2: 2012; Fixed fire extinguishing systems. Hose systems. Flat hose hose systems
• EN 671-3: 2000; Fixed fire extinguishing systems. Hose systems. Maintenance of semi-rigid hose reels and flat hose hose systems
• EN 671-3: 2009; Fixed fire extinguishing systems. Hose systems. Maintenance of semi-rigid hose reels and flat hose hose systems
• EN 672: 1997; Flexible floor coverings. Determination of the apparent density of agglomerated cork.
• EN 673: 1998; Glass in the building. Determination of thermal transmittance (U-value). Calculation method.
• EN 673: 2011; Glass in the building. Determination of thermal transmittance (U-value). Calculation method.
• EN 674: 1998; Glass in the building. Determination of thermal transmittance (U-value). The shielded hot plate method.
• EN 674: 2011; Glass in the building. Determination of thermal transmittance (U-value). The shielded hot plate method.
• EN 675: 1998; Glass in the building. Determination of thermal transmittance (U-value). Heat flow meter method.
• EN 675: 2011; Glass in the building. Determination of thermal transmittance (U-value). Heat flow meter method.
• EN 676: 1997; Automatic forced draft burners for gaseous fuels.
• EN 677: 1998; Gas fired central heating boilers. Special requirements for condensing boilers with a rated heat input not exceeding 70 kW.
• EN 678: 1994; Determination of the dry density of autoclaved aerated concrete.
• EN 679: 1994; Determination of compressive strength of autoclaved aerated concrete.
• EN 679: 2005; Determination of compressive strength of autoclaved aerated concrete.
• EN 680: 1994; Determination of drying shrinkage of autoclaved aerated concrete.
• EN 680: 2005; Determination of drying shrinkage of autoclaved aerated concrete.
• EN 681-1: 1996; Elastomeric seals. Material requirements for pipe joint gaskets used in water and drainage applications. vulcanized rubber
• EN 681-2: 2000; Elastomeric seals. Material requirements for pipe joint gaskets used in water and drainage applications. Thermoplastic elastomers
• EN 681-3: 2000; Elastomeric seals. Material requirements for pipe joint gaskets used in water and drainage applications. Cellular materials of vulcanized rubber
• EN 681-4: 2000; Elastomeric seals. Material requirements for pipe joint gaskets used in water and drainage applications. Cast polyurethane sealants
• EN 683-1: 1996; Aluminum and aluminum alloys. finstock Technical conditions for inspection and delivery
• EN 683-1: 2006; Aluminum and aluminum alloys. finstock Technical conditions for inspection and delivery
• EN 683-2: 1997; Aluminum and aluminum alloys. finstock Mechanical properties
• EN 683-2: 2006; Aluminum and aluminum alloys. finstock Mechanical properties
• EN 683-3: 1997; Aluminum and aluminum alloys. finstock Tolerances on dimensions and form
• EN 683-3: 2006; Aluminum and aluminum alloys. finstock Tolerances on dimensions and form
• EN 684: 1996; Flexible floor coverings. Determination of seam strength.
• EN 685: 1996; Flexible and laminate floor coverings. classification
• EN 685: 2005; Flexible, textile and laminate floor coverings. classification
• EN 685: 2007; Flexible, textile and laminate floor coverings. classification
• EN 686: 1997; Flexible floor coverings. Specifications for flat and decorative linoleum on a foam base.
• EN 686: 2011; Flexible floor coverings. Specifications for flat and decorative linoleum on a foam base.
• EN 687: 1997; Flexible floor coverings. Specifications for plain and decorative linoleum on a cork back.
• EN 687: 2011; Flexible floor coverings. Specifications for plain and decorative linoleum on a cork back.
• EN 688: 1997; Flexible floor coverings. Specification for Corklinoleum.
• EN 688: 2011; Flexible floor coverings. Specification for Corklinoleum.
• EN 689: 1996; Workplace environments. Guidelines for the assessment of inhalation exposure to chemicals for comparison with breakpoints and measurement strategy.
• EN 690 : 1994+A1 : 2009 ; Agricultural machinery. Fertilizer spreaders. Safety.
• EN 690: 2013; Agricultural machinery. Fertilizer spreaders. Safety.
• EN 691-1: 2012; The safety of woodworking machinery. common requirements
• EN 692 : 2005+A1 : 2009 ; Machine tools. Mechanical presses. Safety.
• EN 694: 2014; Fire hoses. Semi-rigid hoses for stationary systems.
• EN 698: 1995; Fiber ropes for general service. Manila and sisal.
• EN 699: 1995; Fiber ropes for general service. Polypropylene.
• EN 700 : 1995 ; Fiber ropes for general service. Polyethylene.
• EN 701: 1995; Fiber ropes for general service. General specification.
• EN 702: 1995; Protective clothing. Protection against heat and flame. Test method. Determination of contact heat conduction through protective clothing or materials.
• EN 703: 1996; Agricultural machinery. Silage cutters. Safety.
• EN 704 : 1999+A1 : 2009 ; Agricultural machinery. Collector balers. Safety.
• EN 705: 1995; Plastic piping systems. Glass reinforced thermoset (GRP) pipes and fittings. Regression analysis methods and their uses.
• EN 706 : 1996+A1 : 2009 ; Agricultural machinery. Hanging shoot tipping machines. Safety.
• EN 707 : 1999+A1 : 2009 ; Agricultural machinery. Slurry tankers. Safety.
• EN 708: 1997; Agricultural machinery. Soil tillage machines with power tools. Safety.
• EN 710 : 1997+A1 : 2010 ; Safety requirements for foundry molding and core making machines and plant and associated equipment.
• EN 711: 1996; Inland navigation vessels. Deck railings. Requirements, types.
• EN 711: 2016; Inland navigation vessels. Railings for deck and side decks. Requirements, designs and types.
• EN 712 : 1995 ; Thermoplastic piping systems. End load-bearing mechanical connections between pressure pipes and fittings. Test method for resistance to pulling out under constant longitudinal force.
• EN 713: 1995; Plastic piping systems. Mechanical connections between fittings and polyolefin pressure pipes. Test method for sealing under internal pressure of assemblies subjected to bending.
• EN 714: 1995; Thermoplastic piping systems. Non-end load-bearing elastomeric sealing ring type connections between pressure pipes and molded fittings. Test method for sealing under internal hydrostatic pressure without end pressure.
• EN 715 : 1995 ; Thermoplastic piping systems. End load bearing connections between small diameter pressure pipes and fittings. Test method for tightness under internal water pressure, including tip thrust.
• EN 716-1: 1996; Furniture. Cots and folding beds for home use. Security requirements
• EN 716-1 : 2008+A1 : 2013 ; Furniture. Cots and folding beds for home use. Security requirements
• EN 716-2: 1996; Furniture. Cots and folding beds for home use. Test methods
• EN 716-2 : 2008+A1 : 2013 ; Furniture. Cots and folding beds for home use. Test methods
• EN 717-1: 2004; Wood based panels. Determination of formaldehyde release. Formaldehyde emission by chamber method
• EN 717-2: 1995; Wood based panels. Determination of formaldehyde release. Formaldehyde release by gas analysis method
• EN 717-3: 1996; Wood based panels. Determination of formaldehyde release. Formaldehyde release by bottle method
• EN 718: 1996; Flexible floor coverings. Determination of the mass per unit area of ​​a reinforcement or a support of a polyvinyl chloride floor covering.
• EN 719: 1994; Resource coordination. Duties and responsibilities.
• EN 720-1: 1999; Portable gas cylinders. Gases and gas mixtures. Properties of pure gases
• EN 720-2: 1997; Portable gas cylinders. Gases and gas mixtures. Determination of flammability and oxidizing properties of gases and gas mixtures
• EN 721: 1999; Accommodation tools. Safety ventilation requirements.
• EN 721: 2004; Accommodation tools. Safety ventilation requirements.
• EN 722-1: 1996; Accommodation tools. Liquid fuel heating systems. Caravans and mobile homes (caravan holiday homes)
• EN 722-1: 2004; Accommodation tools. Liquid fuel heating systems. Caravans and caravan holiday homes
• EN 723: 1996; Copper and copper alloys. Combustion method for the determination of carbon on the inner surface of copper pipes or fittings.
• EN 723: 2009; Copper and copper alloys. Combustion method for determining the carbon content on the inner surface of copper pipes or fittings.
• EN 724: 1995; Guidance on the application of EN 29001 and EN 46001 and EN 29002 and EN 46002 for inactive medical devices.
• EN 725-1: 1997; Advanced technical ceramics. Test methods for ceramic powders. Determination of impurities in alumina
• EN 725-1: 2007; Advanced technical ceramics. Test methods for ceramic powders. Determination of impurities in alumina
• EN 725-2: 2007; Advanced technical ceramics. Test methods for ceramic powders. Determination of impurities in barium titanate
• EN 725-3: 1994; Advanced technical ceramics. Test methods for ceramic powders. Determination of the oxygen content of non-oxides by thermal extraction with a carrier gas
• EN 725-3: 2007; Advanced technical ceramics. Test methods for ceramic powders. Determination of the oxygen content of non-oxides by thermal extraction with a carrier gas
• EN 725-4: 2006; Advanced technical ceramics. Test methods for ceramic powders. Determination of oxygen content in aluminum nitride by XRF analysis
• EN 725-5: 1996; Advanced technical ceramics. Test methods for ceramic powders. Determination of particle size distribution
• EN 725-5: 2007; Advanced technical ceramics. Test methods for ceramic powders. Determination of particle size distribution
• EN 725-6: 1996; Advanced technical ceramics. Test methods for ceramic powders. Determination of specific surface area
• EN 725-7: 1996; Advanced technical ceramics. Test methods for ceramic powders. Determination of absolute density
• EN 725-8: 2006; Advanced technical ceramics. Test methods for ceramic powders. Determination of guided bulk density
• EN 725-9 : 2006 ; Advanced technical ceramics. Test methods for ceramic powders. Determination of unused bulk density
• EN 725-10: 1997; Advanced technical ceramics. Test methods for ceramic powders. Determining compression properties
• EN 725-10: 2007; Advanced technical ceramics. Test methods for ceramic powders. Determining compression properties
• EN 725-11 : 2006 ; Advanced technical ceramics. Test methods for ceramic powders. Density determination in natural sintering
• EN 726-1: 1995; ID card systems. Telecommunication. Integrated circuit(s) boards and terminals. System view
• EN 726-2: 1996; ID card systems. Telecommunication. Integrated circuit(s) boards and terminals. security framework

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.