EN European Norm Tests Part 80

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 13942: 2009; Oil and natural gas industries. Pipeline transport systems. Pipeline valves.
• EN 13946: 2014; water quality. Guidance for routine sampling and preparation of benthic diatoms from rivers and lakes.
• EN 13947: 2006; Thermal performance of curtain wall. Calculation of thermal transmittance.
• EN 13948 : 2007 ; Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to root penetration.
• EN 13950 : 2005 ; Drywall thermal/acoustic insulation composite panels. Definitions, requirements and test methods.
• EN 13950: 2014; Drywall thermal/acoustic insulation composite panels. Definitions, requirements and test methods.
• EN 13951: 2012; Liquid pumps. Security requirements. Agri-food equipment; Design rules to ensure hygiene in use.
• EN 13953: 2015; LPG equipment and accessories. Pressure relief valves for portable refillable cylinders for Liquefied Petroleum Gas (LPG).
• EN 13954 : 2005+A1 : 2010 ; Food processing machinery. Bread slicers. Safety and hygiene requirements.
• EN 13956 : 2005 ; Flexible sheet for waterproofing. Plastic and rubber sheets for roof waterproofing. Definitions and properties.
• EN 13956: 2012; Flexible sheets for waterproofing. Plastic and rubber sheets for roof waterproofing. Definitions and properties.
• EN 13957 : 2008 ; Aluminum and aluminum alloys. Extruded round, coiled tubing for general applications. Specification.
• EN 13958 : 2008 ; Aluminum and aluminum alloys. Cold drawn, round, coiled tubing for general applications. Specification.
• EN 13959: 2004; Anti-pollution check valves. E Family including DN 6 to DN 250, type A, B, C and D.
• EN 13963: 2005; Joint materials for drywall sheets. Definitions, requirements and test methods.
• EN 13963: 2014; Joint materials for drywall sheets. Definitions, requirements and test methods.
• EN 13964: 2014; Suspended ceilings. Requirements and test methods.
• EN 13965-2: 2010; Characterization of waste. terminology. Management terms and definitions
• EN 13967 : 2004+A1 : 2006 ; Flexible sheets for waterproofing. Plastic and rubber moisture resistant sheets, including plastic and rubber basement tanking sheet. Definitions and properties.
• EN 13967: 2012; Flexible sheets for waterproofing. Plastic and rubber moisture resistant sheets, including plastic and rubber basement tanking sheet. Definitions and properties.
• EN 13969: 2004; Flexible sheets for waterproofing. Bitumen moisture resistant slabs, including bitumen basement tanking slabs. Definitions and properties.
• EN 13970: 2004; Flexible sheets for waterproofing. Bitumen water vapor control layers. Definitions and properties.
• EN 13971 : 2008 ; Carbonate liming materials. Determination of reactivity. Potentiometric titration method with hydrochloric acid.
• EN 13971: 2012; Carbonate and silicate lime materials. Determination of reactivity. Potentiometric titration method with hydrochloric acid.
• EN 13976-1: 2011; recovery systems. Transport of incubators. Interface conditions
• EN 13976-2: 2011; recovery systems. Transport of incubators. System requirements
• EN 13977: 2005; Railway applications. To watch. Safety requirements for portable machines and cars for construction and maintenance.
• EN 13977: 2011; Railway applications. To watch. Safety requirements for portable machines and cars for construction and maintenance.
• EN 13978-1 : 2005 ; Precast concrete products. Precast concrete garages. Requirements for monolithic or reinforced garages consisting of single sections with room dimensions
• EN 13981-3: 2006; Aluminum and aluminum alloys. Products for structural rail applications. Technical conditions for inspection and delivery. castings
• EN 13981-4: 2006; Aluminum and aluminum alloys. Products for structural rail applications. Technical conditions for inspection and delivery. tattoo
• EN 13984 : 2004+A1 : 2006 ; Flexible sheets for waterproofing. Plastic and rubber vapor control layers. Definitions and properties.
• EN 13984 : 2013 ; Flexible sheets for waterproofing. Plastic and rubber vapor control layers. Definitions and properties.
• EN 13986 : 2004+A1 : 2015 ; Wood-based panels for use in construction. Specifications, conformity assessment and marking.
• EN 13999-1: 2006; Adhesives. Short-term method for measuring the emission characteristics of low-solvent or solvent-free adhesives after application. General procedure
• EN 13999-1: 2013; Adhesives. Short-term method for measuring the emission characteristics of low-solvent or solvent-free adhesives after application. General procedure
• EN 13999-2: 2007; Adhesives. Short-term method for measuring the emission characteristics of low-solvent or solvent-free adhesives after application. Determination of volatile organic compounds
• EN 13999-2: 2013; Adhesives. Short-term method for measuring the emission characteristics of low-solvent or solvent-free adhesives after application. Determination of volatile organic compounds
• EN 13999-3 : 2007+A1 : 2009 ; Adhesives. Short-term method for measuring the emission characteristics of low-solvent or solvent-free adhesives after application. Determination of volatile aldehydes
• EN 13999-4 : 2007+A1 : 2009 ; Adhesives. Short-term method for measuring the emission characteristics of low-solvent or solvent-free adhesives after application. Determination of volatile diisocyanates
• EN 14012 : 2008 ; Postal services. Service quality. Principles for handling complaints.
• EN 14015 : 2004 ; Specification for the design and manufacture of site-built, vertical, cylindrical, flat-bottomed, above-ground, welded, steel tanks for the storage of liquids at and above ambient temperature.
• EN 14017 : 2005+A2 : 2009 ; Agricultural and forestry machinery. Solid fertilizer distributors. Safety.
• EN 14018 : 2005+A1 : 2009 ; Agricultural and forestry machinery. Seed drills. Safety.
• EN 14019: 2016; Curtain wall. Impact resistance. Performance requirements.
• EN 14022 : 2010 ; Structural adhesives. Determination of pot life (working life) of multi-component adhesives.
• EN 14023 : 2005 ; Bitumen and bituminous binders. Framework specification for polymer modified bitumen.
• EN 14023: 2010; Bitumen and bituminous binders. Specification framework for polymer modified bitumen.
• EN 14025 : 2008 ; Tanks for the transport of dangerous goods. Metallic pressure tanks. Design and construction.
• EN 14025 : 2013+A1 : 2016 ; Tanks for the transport of dangerous goods. Metallic pressure tanks. Design and construction.
• EN 14033-1 : 2008 ; Railway applications. To watch. Railway construction and maintenance machinery. Technical requirements for running
• EN 14033-1 : 2011 ; Railway applications. To watch. Railway construction and maintenance machinery. Technical requirements for running
• EN 14033-2 : 2008+A1 : 2011 ; Railway applications. To watch. Railway construction and maintenance machinery. Technical requirements to work
• EN 14033-3 : 2009+A1 : 2011 ; Railway applications. To watch. Railway construction and maintenance machinery. General security requirements
• EN 14034-1 : 2004+A1 : 2011 ; Determination of the explosion characteristics of dust clouds. Determination of the maximum burst pressure p$dm$da$dx of dust clouds
• EN 14034-2 : 2006+A1 : 2011 ; Determination of the explosion characteristics of dust clouds. Determination of the maximum burst pressure rise rate (dp/dt)$dmax of dust clouds
• EN 14034-3 : 2006+A1 : 2011 ; Determination of the explosion characteristics of dust clouds. Determination of the lower explosion limit LEL of dust clouds
• EN 14034-4 : 2004+A1 : 2011 ; Determination of the explosion characteristics of dust clouds. Determination of the limiting oxygen concentration LOC of dust clouds
• EN 14035-5: 2006; Firework. Batteries and combinations. Specification and test methods
• EN 14035-25 : 2005 ; Firework. Party poppers. Specification and test methods
• EN 14035-38: 2006; Firework. Shooting tubes. Specification and test methods
• EN 14037-1: 2016; Free-hanging heating and cooling surfaces for water with a temperature below 120^DC. Prefabricated ceiling mounted radiant panels for space heating. Technical specifications and requirements
• EN 14037-2: 2016; Free-hanging heating and cooling surfaces for water with a temperature below 120^DC. Prefabricated ceiling mounted radiant panels for space heating. Test method for thermal output
• EN 14037-3: 2016; Free-hanging heating and cooling surfaces for water with a temperature below 120^DC. Prefabricated ceiling mounted radiant panels for space heating. Rating method and evaluation of radiant thermal output
• EN 14037-4: 2016; Free-hanging heating and cooling surfaces for water with a temperature below 120^DC. Prefabricated ceiling mounted radiant panels. Test method for cooling capacity
• EN 14037-5: 2016; Free-hanging heating and cooling surfaces for water with a temperature below 120^DC. Open or closed heated ceiling surfaces. Test method for thermal output
• EN 14038-1: 2016; Electrochemical realkalization and chloride extraction processes for reinforced concrete. Realization
• EN 14043 : 2005+A1 : 2009 ; High-rise air tools for firefighting use. Ladders with turntables with combined movements. Security and performance requirements and test methods.
• EN 14043: 2014; High-rise aircraft for fire and rescue service use. Ladders with turntables with combined movements. Security and performance requirements and test methods.
• EN 14044 : 2005+A1 : 2009 ; High-rise air tools for firefighting use. Turntable ladders with sequential movements. Security and performance requirements and test methods.
• EN 14044: 2014; High-rise aircraft for fire and rescue service use. Turntable ladders with sequential movements. Security and performance requirements and test methods.
• EN 14052 : 2012+A1 : 2012 ; High performance industrial helmets.
• EN 14063-2: 2013; Thermal insulation products for buildings. Expanded clay lightweight aggregate products formed in situ. Features for installed products
• EN 14064-1 : 2010 ; Thermal insulation products for buildings. Loose filled mineral wool (MW) products formed in situ. Specifications for loose filled products before installation
• EN 14064-2: 2010; Thermal insulation products for buildings. Loose filled mineral wool (MW) products formed in situ. Features for installed products
• EN 14065: 2016; Textile. Textiles processed in the laundry. Biocontamination control system.
• EN 14066: 2013; Natural stone testing methods. Determination of resistance to aging by thermal shock.
• EN 14067-4 : 2005+A1 : 2009 ; Railway applications. Aerodynamic. Requirements and test procedures for aerodynamics on the open road
• EN 14067-4: 2013; Railway applications. Aerodynamic. Requirements and test procedures for aerodynamics on the open road
• EN 14067-5 : 2006+A1 : 2010 ; Railway applications. Aerodynamic. Requirements and test procedures for aerodynamics in tunnels
• EN 14070 : 2003+A1 : 2009 ; Safety of machine tools. Transfer and special purpose machines.
• EN 14071 : 2015 ; LPG equipment and accessories. Pressure relief valves for LPG pressure vessels. Assistive equipment.
• EN 14078 : 2009 ; Liquid petroleum products. Determination of fatty acid methyl ester (FAME) content in medium distillates. Infrared spectrometry method.
• EN 14078 : 2014 ; Liquid petroleum products. Determination of fatty acid methyl ester (FAME) content in medium distillates. Infrared spectrometry method.
• EN 14080 : 2005 ; wooden structures. Glued laminated wood. requirements.
• EN 14080 : 2013 ; wooden structures. Glued laminated wood and glued solid wood. requirements.
• EN 14081-1 : 2005+A1 : 2011 ; wooden structures. Strength grade structural wood with a rectangular cross section. General Requirements
• EN 14081-1: 2016; wooden structures. Strength grade structural wood with a rectangular cross section. General Requirements
• EN 14081-2: 2005; wooden structures. Strength grade structural wood with a rectangular cross section. Machine classification. Additional requirements for initial type testing
• EN 14081-2 : 2010+A1 : 2012 ; wooden structures. Strength grade structural wood with a rectangular cross section. Machine classification ; additional requirements for initial type testing
• EN 14081-3: 2005; wooden structures. Strength grade structural wood with a rectangular cross section. Machine classification. Additional requirements for factory production control
• EN 14081-3: 2012; wooden structures. Strength grade structural timber with a rectangular cross section. Machine classification ; additional requirements for factory production control
• EN 14081-4: 2005; wooden structures. Strength grade structural timber with a rectangular cross section. Machine classification. Leveler settings for machine-controlled systems
• EN 14081-4: 2009; wooden structures. Strength grade structural wood with a rectangular cross section. Machine classification. Leveler settings for machine-controlled systems
• EN 14085 : 2010 ; Flexible floor coverings. Features of floor panels for loose laying.
• EN 14103: 2011; Oil and oil derivatives. Fatty acid methyl esters (FAME). Determination of ester and linolenic acid methyl ester contents.
• EN 14105: 2011; Oil and oil derivatives. Fatty acid methyl esters (FAME). Determination of free and total glycerol and mono-, di-, triglyceride content.
• EN 14112: 2016; Oil and oil derivatives. Fatty Acid Methyl Esters (FAME). Determination of oxidation stability (accelerated oxidation test).
• EN 14116 : 2007+A2 : 2010 ; Tanks for the transport of dangerous goods. Digital interface for product identification device.
• EN 14116 : 2012+A1 : 2014 ; Tanks for the transport of dangerous goods. Digital interface for product identification devices for liquid fuels.

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.