EN European Norm Tests Part 134

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 60730-2-15 : 2010 ; Automatic electrical controls for household and similar uses. Special requirements for automatic electric airflow, water flow and water level sensing controls
• EN 60730-2-16: 1998; Automatic electrical controls for household and similar uses. Special requirements for automatic electric water level controls of the float type for household and similar applications
• EN 60730-2-18 : 1999 ; Automatic electrical controls for household and similar uses. Special requirements for automatic electric water and airflow sensing controls, including mechanical requirements
• EN 60731: 1997; Medical electrical equipment. Ionization chamber dosimeters used in radiotherapy.
• EN 60731: 2012; Medical electrical equipment. Ionization chamber dosimeters used in radiotherapy.
• EN 60734 : 1993 ; Hard water specification to be used to test the performance of some electrical appliances.
• EN 60734 : 2012 ; Electrical appliances. Yield. water for testing.
• EN 60735 : 1992 ; Methods for measuring video tape properties.
• EN 60738-1 : 1999 ; Thermistors. Directly heated positive step function temperature coefficient. General specification
• EN 60738-1 : 2006+A1 : 2009 ; Thermistors. Directly heated positive temperature coefficient. General specification
• EN 60738-1-1: 1999; Thermistors. Directly heated positive step function temperature coefficient. Empty detail property. Current limiting application. Evaluation level EZ
• EN 60738-1-1: 2008; Thermistors. Directly heated positive step function temperature coefficient. Empty detail property. Current limiting application. Evaluation level EZ
• EN 60738-1-2: 1999; Thermistors. Directly heated positive step function temperature coefficient. Empty detail property. Heating element application. Evaluation level EZ
• EN 60738-1-2: 2008; Thermistors. Directly heated positive step function temperature coefficient. Empty detail property. Heating element application. Evaluation level EZ
• EN 60738-1-3: 1999; Thermistors. Directly heated positive step function temperature coefficient. Empty detail property. Inrush current application. Evaluation level EZ
• EN 60738-1-3: 2008; Thermistors. Directly heated positive step function temperature coefficient. Empty detail property. Inrush current application. Evaluation level EZ
• EN 60738-1-4: 1999; Thermistors. Directly heated positive step function temperature coefficient. Empty detail property. Detection application. Evaluation level EZ
• EN 60738-1-4: 2008; Thermistors. Directly heated positive step function temperature coefficient. Empty detail property. Detection application. Evaluation level EZ
• EN 60740-1: 2005; Laminations for transformers and inductors. Mechanical and electrical properties
• EN 60742: 1996; Isolation transformers and safety isolation transformers. requirements.
• EN 60743: 1997; Terminology for tools and equipment to be used in live work.
• EN 60743: 2013; Live work. Terminology for tools, devices and equipment.
• EN 60745-1: 2006; Hand-held power tools. Safety. General Requirements
• EN 60745-2-1: 2010; Hand-held power tools. Safety. Special requirements for drills and hammer drills
• EN 60745-2-2: 2010; Hand-held power tools. Safety. Special requirements for screwdrivers and impact wrenches
• EN 60745-2-3: 2007; Hand-held power tools. Safety. Special requirements for grinders, polishers and disc sanders
• EN 60745-2-3 : 2011+A13 : 2015 ; Hand-held power tools. Safety. Special requirements for grinders, polishers and disc sanders
• EN 60745-2-4 : 2009+A11 : 2011 ; Hand-held power tools. Safety. Special requirements for abrasives and polishers other than disc type
• EN 60745-2-5 : 2007+A11 : 2009 ; Hand-held power tools. Safety. Special requirements for circular saws
• EN 60745-2-5: 2010; Hand-held power tools. Safety. Special requirements for circular saws
• EN 60745-2-6: 2010; Hand-held power tools. Safety. Special requirements for hammers
• EN 60745-2-8: 2009; Hand-held power tools. Safety. Special requirements for shears and cutters
• EN 60745-2-9: 2009; Hand-held power tools. Safety. Special requirements for tappers
• EN 60745-2-11: 2010; Hand-held power tools. Safety. Special requirements for reciprocating saws (jigsaws and reciprocating saws)
• EN 60745-2-13 : 2007 ; Hand-held power tools. Safety. Special requirements for chainsaws.
• EN 60745-2-13 : 2009+A1 : 2011 ; Hand-held power tools. Safety. Special requirements for chainsaws
• EN 60745-2-14 : 2009+A2 : 2010 ; Hand-held power tools. Safety. Special requirements for planers
• EN 60745-2-15 : 2006 ; Hand-held power tools. Safety. Special requirements for hedge trimmers
• EN 60745-2-16 : 2010 ; Hand-held power tools. Safety. Special requirements for staplers
• EN 60745-2-17 : 2010 ; Hand-held power tools. Safety. Special requirements for routers and correctors
• EN 60745-2-18 : 2009 ; Hand-held power tools. Safety. Special requirements for strapping tools
• EN 60745-2-19: 2005; Hand-held power tools. Safety. Special requirements for combiners
• EN 60745-2-19 : 2009+A1 : 2010 ; Hand-held power tools. Safety. Special requirements for combiners
• EN 60745-2-20: 2009; Hand-held power tools. Safety. Special requirements for band saws
• EN 60745-2-21 : 2007 ; Hand-held power tools. Safety. Special requirements for sewer cleaners
• EN 60745-2-22 : 2011+A11 : 2013 ; Hand-held power tools. Safety. Special requirements for cutting machines
• EN 60745-2-23: 2013; Hand-held power tools. Safety. Special requirements for die grinders and small rotary tools
• EN 60747-15 : 2012 ; Semiconductor devices. Discrete devices. Isolated power semiconductor devices
• EN 60747-5-1 : 2001 ; Discrete semiconductor devices and integrated circuits. Optoelectronic devices. general
• EN 60747-5-2: 2001; Discrete semiconductor devices and integrated circuits. Optoelectronic devices. Key ratings and features
• EN 60747-5-3: 2001; Discrete semiconductor devices and integrated circuits. Optoelectronic devices. Measurement methods
• EN 60747-5-5 : 2011+A1 : 2015 ; Semiconductor devices. Discrete devices. Optoelectronic devices. photocells
• EN 60747-16-5 : 2013 ; Semiconductor devices. Microwave integrated circuits. oscillators
• EN 60749-7: 2011; Semiconductor devices. Mechanical and climatic test methods. Internal moisture content measurement and analysis of other residual gases
• EN 60749-15 : 2010 ; Semiconductor devices. Mechanical and climatic test methods. Resistance to soldering temperature for through-hole devices
• EN 60749-20: 2009; Semiconductor devices. Mechanical and climatic test methods. Resistance of plastic-encapsulated SMDs to the combined effects of moisture and soldering heat
• EN 60749-21: 2005; Semiconductor devices. Mechanical and climatic test methods. solderability
• EN 60749-21: 2011; Semiconductor devices. Mechanical and climatic test methods. solderability
• EN 60749-26: 2006; Semiconductor devices. Mechanical and climatic test methods. Electrostatic discharge (ESD) susceptibility test. human body model (HBM)
• EN 60749-26: 2014; Semiconductor devices. Mechanical and climatic test methods. Electrostatic discharge (ESD) susceptibility test. human body model (HBM)
• EN 60749-27 : 2006+A1 : 2012 ; Semiconductor devices. Mechanical and climatic test methods. Electrostatic discharge (ESD) susceptibility test. Machine model (MM)
• EN 60749-29: 2011; Semiconductor devices. Mechanical and climatic test methods. Locking test
• EN 60749-30 : 2005+A1 : 2011 ; Semiconductor devices. Mechanical and climatic test methods. Preconditioning of non-hermetic surface mount devices prior to reliability testing
• EN 60749-34 : 2010 ; Semiconductor devices. Mechanical and climatic test methods. power cycle
• EN 60749-35: 2006; Semiconductor devices. Mechanical and climatic test methods. Acoustic microscopy for plastic-encapsulated electronic components
• EN 60749-37 : 2008 ; Semiconductor devices. Mechanical and climatic test methods. Board level drop test method using an accelerometer
• EN 60749-38 : 2008 ; Semiconductor devices. Mechanical and climatic test methods. Soft fault test method for memory semiconductor devices
• EN 60749-39: 2006; Semiconductor devices. Mechanical and climatic test methods. Measurement of moisture diffusion and water solubility in organic materials used for semiconductor components
• EN 60749-40: 2011; Semiconductor devices. Mechanical and climatic test methods. Panel level drop test method using strain gauge
• EN 60749-42: 2014; Semiconductor devices. Mechanical and climatic test methods. temperature and humidity storage
• EN 60749-44: 2016; Semiconductor devices. Mechanical and climatic test methods. Neutron beam irradiated single event effect (SEE) test method for semiconductor devices
• EN 60749-20-1: 2009; Semiconductor devices. Mechanical and climatic test methods. Handling, packaging, labeling and shipping of surface mount devices sensitive to the combined effect of moisture and soldering heat
• EN 60749 : 1999 ; Semiconductor devices. Mechanical and climatic test methods.
• EN 60751: 1996; Industrial platinum resistance thermometer sensors.
• EN 60751 : 2008 ; Industrial platinum resistance thermometers and platinum temperature sensors.
• EN 60754-1: 2014; Test on gases released during combustion of materials from cables. Determination of halogen acid gas content
• EN 60754-2: 2014; Test on gases released during combustion of materials from cables. Determination of acidity (with pH measurement) and conductivity
• EN 60756 : 1993 ; Non-broadcast video tape recorders. Time base stability.
• EN 60758 : 2005 ; Synthetic quartz crystal. Features and user manual.
• EN 60758 : 2009 ; Synthetic quartz crystal. Specifications and instructions for use.
• EN 60758 : 2016 ; Synthetic quartz crystal. Specifications and instructions for use.
• EN 60763-1: 1996; Technical specifications for laminated press board. Definitions, classification and general requirements
• EN 60763-1: 2011; Laminated press board for electrical purposes. Definitions, classification and general requirements
• EN 60763-2: 1996; Technical specifications for laminated press board. test methods
• EN 60763-2: 2007; Technical specifications for laminated press board. test methods
• EN 60763-3-1: 2011; Laminated press board for electrical purposes. Specifications for individual materials. Types LB 3;1A.1 and LB3;1A.2, requirements for pre-compressed pressboard with laminate
• EN 60770-1 : 1999 ; Transmitters for use in industrial process control systems. Performance evaluation methods
• EN 60770-1 : 2011 ; Transmitters for use in industrial process control systems. Performance evaluation methods
• EN 60770-2: 2010; Transmitters for use in industrial process control systems. Inspection and routine test methods
• EN 60770-3: 2006; Transmitters for use in industrial process control systems. Performance evaluation methods of smart transmitters
• EN 60770-3: 2014; Transmitters for use in industrial process control systems. Performance evaluation methods of smart transmitters
• EN 60774-1 : 1994 ; A helical scan videocassette system using 12,65 mm (0,5 inch) magnetic tape of the VHS type. VHS and compact VHS videocassette system
• EN 60774-2 : 2000 ; A helical scan videocassette system using 12,65 mm (0,5 inch) magnetic tape of the VHS type. FM sound recording
• EN 60774-3 : 1994 ; Specification for helical scan videocassette system using 12,65 mm (0,5 inch) magnetic tape of VHS type. S-VHS
• EN 60774-5: 2004; A helical scan videocassette system using 12,65 mm (0,5 inch) magnetic tape of the VHS type. D-VHS
• EN 60779 : 2005 ; Industrial Electroheat Equipment. Test methods for electro slag melting furnaces.
• EN 60789 : 1994 ; Test methods for Rage type gamma cameras.
• EN 60789: 2005; Medical electrical equipment. Properties and test conditions of radionuclide imaging devices. Rage type gamma cameras.
• EN 60793-2: 2008; Optical fibers. Product features. general
• EN 60793-2: 2012; Optical fibers. Product features. general

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.