EN European Norm Tests Part 9

EN Standards are European Standards. These standards specify requirements for a particular item, material, component, system or service, or describe in detail a particular method or procedure, and tests are performed accordingly.

• EN 500-4 : 2006+A1 : 2009 ; Mobile road construction machinery. Safety. Special requirements for compression machines
• EN 500-4: 2011; Mobile road construction machinery. Safety. Special requirements for compression machines
• EN 500-5: 1996; Mobile road construction machinery. Safety. Special requirements for joint cutters
• EN 500-6 : 2006+A1 : 2008 ; Mobile road construction machinery. Safety. Special requirements for paver finishers
• EN 501 : 1994 ; Roofing products from metal sheet. Specifications for full-support roofing products made of zinc plate.
• EN 502: 2000; Roofing products from metal sheet. Specification for fully supported stainless steel sheet products.
• EN 502: 2013; Roofing products from metal sheet. Specification for fully supported roofing products made of stainless steel sheet.
• EN 504: 2000; Roofing products from metal sheet. Specification for fully supported roofing products made of copper plate.
• EN 505: 2000; Roofing products from metal sheet. Specification for fully supported roofing products from sheet steel.
• EN 505: 2013; Roofing products from metal sheet. Specification for fully supported roofing products from sheet steel.
• EN 506 : 2008 ; Roofing products from sheet metal. Specification for self-supporting products made of copper or zinc plate.
• EN 507: 2000; Roofing products from metal sheet. Specification for full-support roofing products of aluminum sheet.
• EN 508-1 : 2008 ; Roofing products from metal sheet. Specification for self-supporting products made of steel, aluminum or stainless steel sheet. steel
• EN 508-1: 2014; Roofing and coating products from sheet metal. Self-supporting properties of steel, aluminum or stainless steel sheet. steel
• EN 508-2: 2008; Roofing products from metal sheet. Specification for self-supporting products made of steel, aluminum or stainless steel sheet. Aluminum
• EN 508-3: 2008; Roofing products from metal sheet. Specification for self-supporting products made of steel, aluminum or stainless steel sheet. Stainless steel
• EN 510: 1993; Protective clothing specification for use where there is a risk of entanglement with moving parts.
• EN 511: 1994; Features of protective gloves against cold.
• EN 512 : 1995 ; Fiber-cement products. Pressure pipes and connections.
• EN 513: 1999; Unplasticized polyvinylchloride (PVC-U) profiles for the manufacture of windows and doors. Determination of resistance to artificial weathering.
• EN 514: 2000; Unplasticized polyvinylchloride (PVC-U) profiles for the manufacture of windows and doors. Determination of the strength of welded corners and T-joints.
• EN 515: 1993; Aluminum and aluminum alloys. Forged products. Anger assignments.
• EN 516: 1995; Prefabricated accessories for the roof. Facilities for roof access. Walkways, steps and steps.
• EN 516: 2006; Prefabricated accessories for the roof. Facilities for roof access. Walkways, steps and steps.
• EN 517: 1995; Prefabricated accessories for the roof. Roof safety hooks.
• EN 517: 2006; Prefabricated accessories for the roof. Roof safety hooks.
• EN 518: 1995; Structural timber. Rating. Requirements for visual durability rating standards.
• EN 519: 1995; Structural timber. Rating. Requirements for machine strength rated timber and graders.
• EN 521: 1998; Specification for special liquefied petroleum gas devices. Portable vapor pressure liquefied petroleum gas devices.
• EN 521: 2006; Specifications for special liquefied petroleum gas devices. Portable vapor pressure liquefied petroleum gas devices.
• EN 522: 1998; Adhesives for leather and shoe materials. Binding strength. Minimum requirements and adhesive classification.
• EN 523: 1997; Steel strip sheaths for pre-stretching tendons. Terminology, requirements, quality control.
• EN 524-1: 1997; Steel strip sheaths for pre-stretching tendons. Test methods. Determination of shapes and sizes
• EN 524-2: 1997; Steel strip sheaths for pre-stretching tendons. Test methods. determination of bending behavior
• EN 524-3: 1997; Steel strip sheaths for pre-stretching tendons. Test methods. Forward and backward bending test
• EN 524-4: 1997; Steel strip sheaths for pre-stretching tendons. Test methods. Determination of lateral load resistance
• EN 524-5: 1997; Steel strip sheaths for pre-stretching tendons. Test methods. Determination of tensile load resistance
• EN 524-6: 1997; Steel strip sheaths for pre-stretching tendons. Test methods. Sealing determination (water loss detection)
• EN 525: 1998; Non-domestic, direct gas-fired forced convection air heaters for space heating, not exceeding a net heat input of 300 kW.
• EN 525: 2009; Non-domestic, direct gas-fired forced convection air heaters for space heating, not exceeding a net heat input of 300 kW.
• EN 526: 1995; Inland navigation vessels. Scaffolds not exceeding 8 m in length. Requirements, types.
• EN 527-1 : 2000 ; Office furnitures. Desks and tables. Dimensions
• EN 527-1 : 2011 ; Office furnitures. Desks and tables. Dimensions
• EN 527-2: 2016; Office furnitures. Work desks. Safety, strength and endurance requirements
• EN 528: 1997; Storage and retrieval equipment attached to the railway. Safety.
• EN 528 : 2008 ; Storage and retrieval equipment attached to the railway. Security requirements.
• EN 529: 2005; Respiratory protective devices. Recommendations for selection, use, care and maintenance. Guidance document.
• EN 530: 1995; Wear resistance of protective clothing material. Test methods.
• EN 530: 2010; Wear resistance of protective clothing material. Test methods.
• EN 531: 1995; Protective clothing for workers exposed to heat.
• EN 532: 1995; Protective clothing. Protection against heat and flame. Test method for limited flame spread.
• EN 533: 1997; Protective clothing. Protection against heat and flame. Limited flame propagation materials and material groups.
• EN 534 : 2006+A1 : 2010 ; Corrugated bitumen sheets. Product features and test methods.
• EN 535: 1991; Method for determining the flow time of dyes using flow cups.
• EN 536: 1999; Road construction machinery. asphalt mixing plants. Security requirements.
• EN 536: 2015; Road construction machinery. Mixing plants for road building materials. Security requirements.
• EN 538: 1994; Clay roof tiles for discontinuous laying. Flexural strength test.
• EN 539-1 : 1994 ; Clay roof tiles for discontinuous laying. Determination of physical properties. tightness test
• EN 539-1 : 2005 ; Clay roof tiles for discontinuous laying. Determination of physical properties. tightness test
• EN 539-2: 1998; Clay roof tiles for discontinuous laying. Determination of physical properties. Frost resistance test
• EN 539-2: 2006; Clay roof tiles for discontinuous laying. Determination of physical properties. Frost resistance test
• EN 539-2: 2013; Clay roof tiles for discontinuous laying. Determination of physical properties. Frost resistance test
• EN 540: 1993; Clinical trial of medical devices for human subjects.
• EN 541: 1995; Aluminum and aluminum alloys. Rolled products for boxes, lids and closures. Features..
• EN 541: 2006; Aluminum and aluminum alloys. Rolled products for boxes, lids and closures. Features
• EN 543: 1995; Adhesives. Determination of the apparent density of powder and granular adhesives.
• EN 544: 1998; Mineral and/or synthetic reinforced bitumen shingles.
• EN 544: 2005; Mineral and/or synthetic reinforced bitumen shingles. Product features and test methods.
• EN 544: 2011; Mineral and/or synthetic reinforced bitumen shingles. Product features and test methods.
• EN 545: 1995; Ductile iron pipes, fittings, accessories and their connections for water pipelines. Requirements and test methods.
• EN 545: 2006; Ductile iron pipes, fittings, accessories and their connections for water pipelines. Requirements and test methods.
• EN 545: 2010; Ductile iron pipes, fittings, accessories and their connections for water pipelines. Requirements and test methods.
• EN 546-1: 1997; Specification for aluminum and aluminum alloys. Foil. Technical conditions for inspection and delivery
• EN 546-1: 2006; Aluminum and aluminum alloys. Foil. Technical conditions for inspection and delivery
• EN 546-2: 1997; Specification for aluminum and aluminum alloys. Foil. Mechanical properties
• EN 546-2: 2006; Aluminum and aluminum alloys. Foil. Mechanical properties
• EN 546-3: 1997; Specification for aluminum and aluminum alloys. Foil. Tolerances in dimensions
• EN 546-3: 2006; Aluminum and aluminum alloys. Foil. Tolerances in dimensions
• EN 546-4: 1997; Specification for aluminum and aluminum alloys. Foil. Private property requirements
• EN 546-4: 2006; Aluminum and aluminum alloys. Foil. Private property requirements
• EN 547-1 : 1996+A1 : 2008 ; Machinery safety. Human body measurements. Principles for determining the required dimensions for openings for whole body entry into the machine
• EN 547-2 : 1996+A1 : 2008 ; Machinery safety. Human body measurements. Principles for determining the required dimensions for access openings
• EN 547-3 : 1996+A1 : 2008 ; Machinery safety. Human body measurements. anthropometric data
• EN 548: 1997; Flexible floor coverings. Specification for plain and decorative linoleum.
• EN 548: 2011; Flexible floor coverings. Specification for plain and decorative linoleum.
• EN 549: 1995; Properties of rubber materials for gaskets and diaphragms for gas appliances and gas equipment.
• EN 550 : 1994 ; Sterilization of medical devices. Validation and routine control of ethylene oxide sterilization.
• EN 552 : 1994 ; Sterilization of medical devices. Validation and routine control of sterilization by irradiation.
• EN 554 : 1994 ; Sterilization of medical devices. Validation and routine control of moist heat sterilization.
• EN 556-2: 2015; Sterilization of medical devices. Requirements for medical devices to be called “STERILE”. Requirements for aseptically processed medical devices
• EN 556: 1995; Sterilization of medical devices. Requirements for terminally sterilized devices to be labeled 'sterile'.
• EN 558-1: 1996; Industrial valves. Face-to-face and center-to-face dimensions of metal valves for use in flanged piping systems. PN defined valves
• EN 558-2: 1996; Industrial valves. Face-to-face and center-to-face dimensions of metal valves for use in flanged piping systems. Class designated valves
• EN 558 : 2008+A1 : 2011 ; Industrial valves. Face-to-face and center-to-face dimensions of metal valves for use in flanged piping systems. Valves designated as PN and Class.
• EN 559: 1994; Gas welding equipment. Rubber hoses for welding, cutting and similar operations.
• EN 560: 1995; Gas welding equipment. Hose connections for welding, cutting and similar operations.
• EN 560: 2005; Gas welding equipment. Hose connections for equipment for welding, cutting and similar operations.
• EN 561: 1995; Gas welding equipment. Quick-connect couplings with shut-off valve for welding, cutting and similar operations.
• EN 562: 1995; Gas welding equipment. Manometers used in welding, cutting and similar processes.
• EN 563: 1994; Machinery safety. Temperatures of touchable surfaces. Ergonomics data to establish temperature limit values ​​for hot surfaces.

Standards facilitate international trade by ensuring compatibility and interoperability of components, products and services. European Standards (ENs) are documents approved by three European Standardization Organizations (ESO), CEN, CENELEC or ETSI; Recognized as competent in the field of voluntary technical standardization for EU Regulation 1025/2012.